Creation of a database of SQL for Orchestrator

Similar Questions

• How to create a database in SQL Server Express 2014 to be used with LV Database Toolkit

  I use LV Database Toolkit, which, by default, uses the Jet database. Now, I want to use the SQL with LV Database Toolkit database. I downloaded and installed "SQL Server Express with Tools 2014" in my laptop of Labview. Now I want to create a database in SQL Server, because I think that it is a requirement for the creation of a "udl connection file" (file *.udl). Please help me!

  
  

• Involved in the creation of the database in PeopleSoft FSCM

  Hi all

  
  I am creating the peoplesoft FSCM 9.2.I for database have followed the steps outlined in the document to install oracle (peopleTools version 8.54). I had the problem when I try to connect like application designer "EBU Invalid ID and password for sign. I can able to connect using Data Mover SYSADM/SYSADM.

  I have run the grant.sql query too. Please tell how to solve these errors. I created the db twice, but no luck, I got the same problem.

  I doubt that there is any some Userid for FSCM (Say VP1),because I have procedure step by step the document they say for user ID FSCM is VP1. But in dbowner.sql it look like as follows

  DBOwner.SQL

  ------------------

  set echo on

  coil dbowner.log

  GRANT DBA TO PS IDENTIFIED BY PS;

  CONNECTION PS/PS;

  CREATE TABLE PSDBOWNER (DBNAME VARCHAR2 (8) NOT NULL, OWNERID VARCHAR2 (8) NOT NULL) TABLESPACE PSDEFAULT;

  CREATE A UNIQUE PS_PSDBOWNER ON PSDBOWNER (DBNAME) INDEX TABLESPACE PSDEFAULT;

  CREATE THE PSDBOWNER FOR PSDBOWNER PUBLIC SYNONYM;

  System/CONNECTION Manager;

  REVOKE DBA OF THE PS;

  ALTER USER QUOTA UNLIMITED ON PSDEFAULT PS;

  spool off

  --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  "Please tell me if I need to change the" 'PS " as"VP1 "in file above. ? If it's like me please where are all the place, I have to change "PS" as "VP1. And when during the installation of the database as asking for Application Server ID Application Server and Password.Please tell what I want to give "PS" or "VP1"?

  Please help resolve this error. Sorry if I misunderstood any procedure.

  I think you need some basic knowledge of first before going any further in the installation.

  SYSADM is the owner of the user Oracle Peoplesoft objects (tables, views,...), you can connect to SGD but will be "bootstrap" mode only. It cannot be used for AppDesigner connection.

  PS is a locked user account Oracle hosting only arrays of connection security. It cannot be used for any connection of DMS or AppDesigner application.

  VP1 is a user of the application. It cannot be used for Oracle, only DMS/AppDesigner connection. If you turn on all counts with the default password of the screenshot that you has shown, it should be able to connect to the application.

  Server application ID is used to manage the application server, defined in the configuration file of the application server.

  Sorry to move, but you really must go through the documentation official http://docs.oracle.com/cd/E55418_01/psft/html/docset.html

  In particular: http://docs.oracle.com/cd/E55418_01/psft/acrobat/Getting_Started_on_PeopleSoft_Installation_072014.pdf and http://docs.oracle.com/cd/E55418_01/psft/acrobat/PeopleTools_8.54_Installation_for_Oracle_072014.pdf

  I also explained something like several years there on my blog and always topical: on the road to Peoplesoft: on the road to Peoplesoft: creation of the Peoplesoft database

  Nicolas.

• SQL vCenter Orchestrator config problem

  I recently downloaded and installed vSphere 5. I installed vCenter and added my esxi servers successfully. I'm trying to configure Orchestrator. When I connect and try to set up the database, I can not connect. I'm not sure what to put. I entered the ip address of the local computer, which is where I installed the vCenter server. When I installed vCenter he installed SQL 2008. I guess it creates the database for Orchestrator, is this correct. If this is not the case, what should I do to get this working. I downloaded SQL 2008 express manager but cannot even see that the database. How to solve this problem?

  Hello

  The vCenter Server Setup does not create a database for Orchestrator.

  Here's what you need to do to set up the database of the vCO.

  First configure SQL Server Express to the remote connection. Here are the steps:

  http://pubs.VMware.com/vSphere-50/topic/com.VMware.vSphere.vco_install_config.doc_42/GUID-0F8AE76E-6BB0-4679-B597-973E4ECB8177.html

  Then manually create the database of vCO. For SQL Server Express, you can use the osql tool (just search osql on the computer on which you installed SQL Server Express). The osql.exe file can be found here:

  C:\Program Files (x 86) \Microsoft SQL Server\90\Tools\Binn\

  or here:

  C:\Program Files\Microsoft SQL Server\100\Tools\Binn\

  The steps for creating a database with OSQL are:

  1. start the osql tool in a command prompt.

  (a) go to the installation directory.

  (b) type osql.exe EI

  (EI means approved connection).

  2. create the database of vCO, vco, for example.

  (a) on the first line type: CREATE DATABASE vco

  (b) on the second line type: GO

  Finally, you can configure vCO to work with SQL Server Express using the interface Configuration of the vCO. The steps to do this are provided as examples in the subject to: http://pubs.vmware.com/vsphere-50/topic/com.vmware.vsphere.vco_install_config.doc_42/GUID841EB9F0-2CBC-44E3-9AC2-4EBAE36F6942.html

  I hope this helps.

• Problem attaching a database to SQL Server

  Hello

  I try to attach the AdventureWorksLT2012 database to SQL Server... wen I click with the right button on the datbase and look at the properties/security, I don't see any Authenicated listed users... Told me thatI need to give "full control" permission for Authenicated users... How can I do this?

  Ask the question in the SQL Server forums:
  http://social.msdn.Microsoft.com/forums/SQLServer/en-us/home?category=SQLServer

• Using Reporting SERVICES report server cannot open a connection to the report server database in SQL server 2008 R2 sp1

  Hello

  I'm running Reporting SERVICES Version 2007.0100.1600.022 ((SQL_PreRelease). 080709-1414 in Visual Studio 2008 with Microsoft SQL Server 2008 R2 Express Edition with Advanced Services (64-bit) on Windows NT 6.1 SP1.)
  Everything seems to work fine except that I can't deploy: "the report server cannot open a connection to the report server database."
  Connection test ReportServer as OK in the Configuration service report manager and Visual Studio. Run reports in Visual Studio against ReportServer and my other databases.  Deployment fails on a report of VM. Remote access is enabled in the firewall, pipes is enabled in configuration Manager SQL server, the permissions for all access in Windows.
  The error in the log file of report Service:
  Library! WindowsService_1! 12ac! 09/23/2012-21: 05:12: e ERROR: ServiceStartThread: Exception caught during the startup of service. Error: Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerDatabaseUnavailableException: the report server cannot open a connection to the report server database. A connection to the database is required for all applications and treatment. ---> System.Data.SqlClient.SqlException: a network-related or instance-specific error all by establishing a connection to SQL Server. The server is not found or inaccessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - error Search Server/Instance specified)
  Any ideas?
  Thank you.
  -Phil

  Just, I solved the problem I had.

  It turns out, there, there were two questions... first concealing the second.

  SQL Web browser has not been activated.  solution: in properties SQL server configuration manager, transformed the startup to automatic mode and activated the service.

  Microsoft Visual Studio project property targetdatasourcefolder had a server name that precedes the name of the folder. Removed the name of the server.  This works.

  Everything unfolds right now.

• creation of the database

  Hello
  
  database: oracle 11g
  OS: Linux
  
  How to create the database manually? which method is suggestable to the creation of the database (creation of dbca/manual)?
  
  Thank you
  Mike.

  How to create the database manually?

  example script:

  CREATE DATABASE mynewdb
  The USER SYS IDENTIFIED BY sys_password
  The USER IDENTIFIED BY system_password SYSTEM
  LOGFILE GROUP 1 ('/ u01/app/oracle/oradata/mynewdb/redo01.log') SIZE in the 100M.
  GROUP 2 ('/ u01/app/oracle/oradata/mynewdb/redo02.log') SIZE in the 100M.
  GROUP 3 ('/ u01/app/oracle/oradata/mynewdb/redo03.log') SIZE 100 M
  MAXLOGFILES 5
  MAXLOGMEMBERS 5
  MAXLOGHISTORY 1
  MAXDATAFILES 100
  CHARACTER SET US7ASCII
  NATIONAL CHARACTER SET AL16UTF16
  LOCAL MANAGEMENT MEASURE
  DATAFILE ' / u01/app/oracle/oradata/mynewdb/system01.dbf' SIZE 325 M REUSE
  SYSAUX DATAFILE ' / u01/app/oracle/oradata/mynewdb/sysaux01.dbf' SIZE 325 M REUSE
  DEFAULT TABLESPACE users
  DATAFILE ' / u01/app/oracle/oradata/mynewdb/users01.dbf'
  SIZE 500M REUSE AUTOEXTEND ON MAXSIZE UNLIMITED
  TEMPORARY TABLESPACE tempts1 default
  TEMPFILE ' / u01/app/oracle/oradata/mynewdb/temp01.dbf'
  RE-USE OF SIZE 20 M
  UNDO TABLESPACE undotbs
  DATAFILE ' / u01/app/oracle/oradata/mynewdb/undotbs01.dbf'
  SIZE 200M REUSE AUTOEXTEND ON MAXSIZE UNLIMITED;

  which method is suggestable to the creation of the database (creation of dbca/manual)?

  Manual creation is the best.
  If you have no problems of GUI (DBCA) is an easy method.

  see below link for more information.
  http://docs.Oracle.com/CD/B28359_01/server.111/b28310/create003.htm

  Published by: KR10822864 on April 17, 2013 05:53

• IKM SQL FOR SQL query add

  Hello
  I went through this link:
  Ask about the creation and filling I$ table on different condition
  
  
  But I read in the case of IKM SQL FOR SQL add no I$ table is created.
  If this is true please tell me why not I$ is created for this IKM?
  So please tell me how the Frother is checked it to Check Knowledge Module (CKM)?
  
  Thank you
  Sébastien
  
  PS:
  I'm a freshness in tech ODI. So I can fool me please don't bother me

  1. you need to create a mapping. Next, you need to see the code generated at each stage of all.
  Try to analyze it. Then you will have a clear idea.

  If see vedio carefully as given below, you can find staging area is on the source. So its directly select all the columns in the source tab and the insertion of these value in the tab target. No need to use I$ table. Yet once there is no option of flow_control. You can find the static_control.
  http://S3.amazonaws.com/ora/ODI-Simple_SELECT_and_INSERT-interface.swf

  To learn more about flow_control and static_control please go through
  http://odiexperts.com/flow-control-and-static-control/

  Thank you.

• Data loss Virtual Center Database migration sql 2000 2005

  Hi, (sorry for my bad English)

  I moved the db installation remote sql 2000 Server remote sql 2005. I basically followed these steps:

  To migrate a database from the server vCenter 2.5 of SQL Server 2000 to SQL Server 2005:

  1. stop the vCenter Server service.

  2. stop the vCenter on SQL Server 2000 database.

  3 take a backup full database vCenter.

  4 copy the backup of the database to SQL Server 2005 host.

  5. create a new database on SQL Server 2005.

  6. restore the backup SQL 2000 vCenter database to the newly created database.

  7 correct permissions (same account, same password) see KB6565318

  8 native ODBC SQL connection change

  9. perform a change/repair Panel vCenter & gt; Add/Remove programs.

  10 in the Repair Wizard, I select custom and choose the newly created in SQL Server 2005 database.

  11 the authentication type used on SQL 2005 is the same as that used on SQL 2000.

  the license screen has an option box that says "I want to evaluate the product first," Setup does not correctly recognize the previous VirtualCenter database. » ???

  Now I can access the BDD via ODBC, and I am able to start the VC service. However, when I opened the client - I SEE NOTHING. Everything is gone. Totally empty. The data is still there well. I can go in sql 2005 and open the tables and see my hosts and virtual machines listed.

  Help, please.

  Thank you!

  I think that really there is a permission problem, but I'm not only deeply in SQL servers.

  Did you check for orphaned users?

  The permissions that are defined for the database of RESUMES?

  Kind regards

  Gerrit Lehr

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

• Creation of the database - need help

  Hi all
  
  I am new to the creation of the database. We have a project starting early next month.
  
  The application acts as an interface to multiple users. A user will have access to its together authorized data.
  So, he/she can/don't should not access the data of other users. This is the scenario with all other users.
  
  We hope that we will have the large amount of data specific to each user. We have identified some ways to do this:
  
  1. create separate schemas for each user.
  2. create a unique layout and have a main table that will have all the details of the user. On this basis, the data will be created in the tables.
  3. do you have a unique layout and create partitions partitions/sup in the tables for each user.
  
  We have identified the above, with a minimum exposure of creation/maintenance of database. So, we do not know who would be the ideal way
  
  Can you please suggest the best thing to do here.
  
  Thanks in advance.

  If the data structure is exactly the same for all these users and the number of users is high, a better way is to its virtual private database. With DPV, you have a transaction data, but each user will have access to its own lines only.

  http://www.Oracle.com/technetwork/database/security/index-088277.html

  It is more extensible than the solutions you provided and are very transparent after the initial installation.

• IKM SQL for Hyperion Essbase (metadata) - problem when you dial the name of the Member

  Hello world
  
  I need to load the metadata to Essbase to a relational database.
  Essbase: 9.3, Oracle 9i, ODI 10.1.3.5.0
  I have a dimensional table contains the data in the Scenario dimension. The table has 3 columns: code, alias, consolidation.
  Example of 2 lines:
  Effective law-
  BDG budget-
  
  I created a rule file load_scn.rul to update the scenario dimension in my essbase cube and at the launch of the console of administration services it does not work. Each Member has his alias and it is sign of such consolidation as specified in the table.
  
  In ODI
  I created an essbase data store, a data store for my table and an interface. The interface uses the knowledge "IKM SQL for Hyperion Essbase (metadata)" module and the load_scn.rul of State of charge.
  When I run the interface, it will end successfully, but when I check the Essbase outline, the two members were loaded with the name of name of Member composed of all 3 columns in the table dimensional as a single string line!
  I have a member named ' law, real, + "and another called ' bdg, budget,-'."
  Members have no alias and peacebuilding is the default ('+') and not '-' as shown in the dimensional table.
  
  Has anyone of you had this problem? If so, how to solve it?
  
  Any help will be very appreciated!
  Daniela

  Sounds like in the rule under load in the IKM options you have to have the separator rules comma value and data > defined in the tab, replace it with commas in the rule of data source properties.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Database and SQL (data logger)

  Hi all

  I made the database (see photo) to save my data.

  

  Now I want to connect to this database in SQL, but found no example of it on the forum; I read some tutorials but I am little confused with UDL...  Second question is where these data are stored on my PC (mdb file)

  Thank you.

  
  

• Database is configured for Data Guard

  I'm lance a UTF8 conversion on a development database, which has been cloned from Data Guard. There is a warning in the Migration status: "database is configured for Data Guard" which is looking at DMU to determine this? The database is opened in read-write mode and it behaves like a primary database (I have the MISP scanner and run updates to address representations not valid). I would like to know what I need to update the settings.

  This prevent me to convert tables using DEC? When I try to select this option for all tables I get the message, "CDS does not support conversion method"Copy data using CREATE TABLE AS SELECT"for tables that are involved in a process like capture Oracle Streams, or apply.". Another method of conversion available for the table.

  Thank you

  Ben

  CDS checks if the DG_BROKER_START parameter is set to true.

  The problem with the ETG is independent of the Data Guard. The CDS is true for tables which:

  -are asynchronous stream capture source, or

  -update conflict managers have, or

  -DML managers have, or

  -conflict resolution settings have

  The above tables are considered to be configured for Oracle Streams and are not supported by the method of conversion of DEC. This is because the DEC method creates a copy converted the table and falls from the original. The CDS is not able to move the configuration information from the old table to the new flow.

  Thank you

  Sergiusz

• IKM SQL for Hyperion Essbase (data)

  I am trying to load data into essbase through the ODI interface however module "IKM SQL for Hyperion Essbase (data)".

  Whenever data gets overwritten, how I accumulate this data during loading. As it is quite difficult for me to summarize the data, then load.

  Kind regards

  Amine ravi

  Use a rule to load and set to add to the existing values in the State of charge, adjustable load rule name in the options of the IKM.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• ODI - SQL for Hyperion Essbase data loading

  Hello

  We have created a 'vision' in SQL Server that contains our data.  The view currently has every year and periods of Jan 2011 to present.  Each period is about 300 000 records.  I want to only load one period at a time.  For example may 2013.  Currently we use ODBC through a rule of data loading, but the customer wants to use ODI to be compatible with the versions of dimension metadata.  Here's the SQL on the view that works very well.   Is there a way I can run this SQL in the ODI Interface so it pulls only what I declare in the Where clause?  If yes where can I do it?

  Select

  CATEGORY, YEAR, LOCATION, SCRIPT, DEPT, PROJECT, EXPCODE, TIME, ACCOUNT, AMOUNT

  Of

  PS_LHI_HYP_PRJ_ACT

  Where

  YEAR > = "2013" AND PERIOD = 'MAY '.

  ORDER BY CATEGORY ASC ASC FISCAL_YEAR, LOCATION ASC, ASC, ASC, ASC, ASC, PERIOD EXPCODE PROJECT DEPT SCENARIO CSA ACCOUNT CSA;

  Hello

  Simply use the following KM to load data - IKM SQL for Hyperion Essbase (DATA) - in an ODI interface that has the view that you created the Source model. You can add filters to the source which are dynamically by ODI variables to create the Where clause based on the month and year. Make sure you only specify a rule of load method to load the data into the KM