Creation of a polygon with multicolored sides

Similar Questions

• VPN site to Site with a side PAT

  Hi all

  I created a VPN site-to site between two ASA 5505 s, with one side having a static public IP address and one side behind a device with PAT. UDP 500 is sent to the ASA.

  The tunnel works very well if the launched of the side behind the PAT, but may not be brought after on the other side.

  Here's what I see in the system log during initialization of the 'wrong' side:

  

  Is it still a problem with PAT?

  Best regards

  Tobias

  Hello

  To be honest, these are sometimes a little hard the problems especially when you do not have access to actual devices.

  For me the newspapers you shared seem to indicate a problem with the negotiation of Phase 1 where this local line sends proposals of Phase 1 to the remote device until he returned their enough responsible for negotiating to complete.

  So, I would try to confirm the device to remote site that this traffic is indeed allowed. For example, you can check the remote via a management connection VPN device when the VPN is NOT upward and see if there is no sign of VPN negotiating taking place when you start the other site traffic. That said if he still sees the initial messages in the direction that has problems with the opening of the tunnel.

  When you launch the negotiation this site VPN, what you see with the release of

  ISAKMP crypto to show his

  or with the latest software

  See ikev1 crypto his

  Try to take out several times while you generate the traffic to the VPN

  If the remote device does not respond at all you would see probably something like MM_WAIT_MSG2, which means that the local VPN device awaits the first response (second message to trading) of the remote VPN device.

  Maybe this will help you narrow down the problem a bit.

  -Jouni

• I have a PIPO W3f 10.1 inch Android 4.4 + Tablet PC in Windows 8. It is a Tablet dual boot. I'm stuck on the Windows 8.1 with the side Bing with an 0xc0000034 error code.

  I have a PIPO W3f 10.1 inch Android 4.4 + Tablet PC in Windows 8.  It is a Tablet dual boot.  I'm stuck on the Windows 8.1 with the side Bing with an 0xc0000034 error code.  I have tactile and available USB.  Any help would be appreciated!  Also, once I get Windows running again how do I start to Android?  This option is missing.

  Hello

  Thanks for posting your query in Microsoft Community.

  This problem may be due to a corrupt or damaged files in the system partition or boot record that are required for Windows 8.1 start successfully. You may need to run the automatic repair of Windows 8.1.

  However, I would recommend at this point, contact the manufacturer of the Tablet for the best support possible, since you use dualboot.

  Please respond to this topic, after you talk with the manufacturer so that we can continue to research the issue and help you accordingly.

  Do not hesitate to write to us in case you have any problems/concerns while working on your computer, we will be happy to help you.

• Creation of resource JDBC with WLST

  Hello
  I'm new to WSLT (and Python too, actually). I used model EPCO for a WLST to create a JDBC data source in my managed server. It is is the script:
  
  If __name__ == "__main__":
  from wlstModule import *.
  
  print ' from the script... »
  username = 'Abdel Davis.
  password = "welcome1"
  URL = "t3: / / localhost:8001'"
  Connect (username, Password, URL)
  
  Edit()
  startEdit()
  
  dsname = "TesDataSource."
  Server = "osb_server1".
  CD("Servers/"+Server)
  target = cmo
  CD("..) /..")
  
  Print "creating JDBCSystemResource with the name ' + dsname"
  jdbcSR = create (dsname, "TestJDBCResource")
  theJDBCResource = jdbcSR.getJDBCResource)
  theJDBCResource.setName ("TestJDBCDataSource")
  
  connectionPoolParams = theJDBCResource.getJDBCConnectionPoolParams)
  connectionPoolParams.setConnectionReserveTimeoutSeconds (25)
  connectionPoolParams.setMaxCapacity (100)
  connectionPoolParams.setTestTableName ("SELECT * FROM DUAL")
  
  dsParams = theJDBCResource.getJDBCDataSourceParams)
  dsParams.addJNDIName ("ds.test")
  
  driverParams = theJDBCResource.getJDBCDriverParams)
  driverParams.setUrl ("jdbc:oracle:thin:@localhost:1521:XE")
  driverParams.setDriverName ("oracle.jdbc.xa.client.OracleXADataSource")
  
  driverParams.setPassword ("debu")
  
  driverProperties = driverParams.getProperties)
  
  user name = driverProperties.createProperty ("user")
  
  userName.setValue ("debu")
  
  dbName = driverProperties.createProperty ("DatabaseName")
  
  dbName.setValue ("XE")
  
  jdbcSR.addTarget (target)
  
  Save()
  Activate (Block = "true")
  
  Print "made the configuration of the data source.
  
  
  Running the script generated this error:
  
  Traceback (innermost last):
  File "G:\Oracle\Middleware\oepe_helios_11GR1PS3_x64\plugins\org.python.pydev.debug_1.5.7.2010050621\pysrc\pydevd.py", line 978, in?
  File "G:\Oracle\Middleware\oepe_helios_11GR1PS3_x64\plugins\org.python.pydev.debug_1.5.7.2010050621\pysrc\pydevd.py", line 780, term
  File "C:\OEPE\workspace\SetEnvironment\src\DatabaseSettings.py", line 23, in it?
  File "C:\Users\DEBOJI~1\AppData\Local\Temp\wlst_module28197796071029187392.py", line 89, create in
  File "C:\Users\DEBOJI~1\AppData\Local\Temp\wlst_module11921031258847466614.py", line 1848, in raiseWLSTException
  WLSTException: Error occurred when executing create: failed to create type MBean TestJDBCResource. You can only create children of the current CMO MBeans.
  To view the types of children that you can create, use listChildTypes().
  
  
  Could someone please tell me what I'm doing wrong?

  Hi Abdel Davis,

  Try to do the following

  server='osb_server1'
  cd("Servers/"+server)
  target=cmo
  cd("../..")
  

  Remove the block above your WLST Script, it looks like the problem the current INCORRECT management object as the error operating system indicates also the same.
  «WLSTException: error occurred when executing create: failed to create type MBean TestJDBCResource.» You can only create children of the current CMO MBeans. "

  Please see the script which is very similar to your script below:

  Subject: Creation of DataSource WLST with encrypted password
  http://middlewaremagic.com/WebLogic/?p=1400

  * #Additionally *.

  I also suggest you have a look at the scripts below that would make you employment, check them out.

  Subject: Creation of WebLogic DataSource using WLST and the properties file
  http://middlewaremagic.com/WebLogic/?p=4751

  Subject: Creation of multiple DataSource with WLST properties file
  http://middlewaremagic.com/WebLogic/?p=6248

  These WLST scripts require no modification/alteration in real WLST scripts these scripts use properties files, changes made in the properties file so without touching the real scripts due to which it becomes really easy to manage/modify WLST scripts.

  Kind regards
  Véronique Mody

• Y at - it problems with > 8 SID tank

  Thank you for taking my hundred!
  
  Can someone give me advice, why I might not want to create a database with a sid > than 8 characters recommended? We're heading 11g (windows 2008). Currently, we are 10g (windows 2003).
  
  
  Background:
  We head our data warehouse server to a new box. The data warehouse Admin wants the sid to stay the same, but the sid is 9 characters in length. I don't have a ton of experience with oracle and when I asked to change the name of 8 or less charaters, they said it would be too big of a change for them and then assured me that the other more experienced DBA said not to worry. On their behalf, that we ran with a 9 character sid for several years on 10g without no problem I know.
  
  * The only problem I can find on the old system and the new system is that any folder oradata named sid truncated to 8 characters.
  
  Any other question, should I be concerned?
  
  Thank you
  KLE

  http://download.Oracle.com/docs/CD/B28359_01/server.111/b28310/create003.htm#i1008816

• Creation of page template with the specified base style

  I have 4.3 Pages on my Mac mini OSX 10.8.5. I want to create a template for my documents with text in a particular font, but also with all the notes in the same font.

  I searched, found and tried all sorts of ways to ensure that all notes are created in my chosen font, but my attempts have failed. Any help or advice wll be gratefully received and acted.

  Michael,

  Pages ' 09 v4.3 will not allow a frame of reference custom before the creation of reference text. Set a reference to your specifications and then by creating two new character styles that proportionately adjust the exponent, and then the reference text non-exposant - could be saved in the model.

  In the new document, you insert notes and then apply those styles at least on the first note, because with the following notes, you could copy and paste the first note of the selected character style. He said...

• Windows live messenger... having problems with by-side config

  original title: windows live messenger

  problems with side-by-side config nobody knows nothing about it pls

  problems with side-by-side config nobody knows nothing about it pls

  Messenger - side by side configuration error

  Start button > Search box, type regedit > C: key > (uac prompt) >

  expand (click the pointer before) HKET_CURRENT_USER >
  expandSoftware >
  expandMicrosoft >
  expandMSNMessenger >
  Expand PerPassportSettings > under PerPassportSettings, find 2 folders with a series of numbers > delete the two folders including their subfolders > window regedit.
  Restart the Messenger.

  If the above does not help, please repost in Windows Live Solution center - forum Messenger - Messenger discussions section

  http://windowslivehelp.com/forums.aspx?ProductID=2

• ToolbarManager with three sides border

  Hello

  I work with ToolbarManager and ToolbarButtonField using BB JRE 7.0.

  The toolbar shot is always opaque. It has three white border at the top, right and left sides.

  How can I remove this border?

  Well you can remove by sublayout ToolbarManager overridinf method.

  Problem solved!

• What happens with Server - Side Includes (SSI)?

  I use DWCC15 and use .shtm my file for the years extension to analyze my includes.  Now, I run in the shadow areas that make me wonder if I missed something important along the way.

  Clue 1: the removal of the ssi toolbar button (I've put myself back and forth)

  Hint 2: the inability of the lint with an .shtm extension files

  There is probably more, but I just switched to CC15 last week.

  I use no models.  Includes are so much easier.  Some of my pages consist entirely of includes.  Is average what Adobe forcing patterns down our throats or I do not see the big picture?

  Thank you, Kim

  For some reason, the option Include server-side has been removed since Dreamweaver a while back. Repeated requests to bring him fell on deaf ears.

  As well as not being only unable to lint with an .shtm extension files, you could submit an idea for this implementation.

  

  Ideas submitted through this forum are the new way to submit feature requests to the Dreamweaver team.

  I don't think that there is no 'secret plan' for models force on users of Dreamweaver. What has happened in recent years is an attempt to remove the features little used since Dreamweaver to make it less inflated. Sometimes useful features become victims of this process. If enough people to make a deal of good use to restore or improve them, engineers are usually quite receptive. Quite why SSI has been neglected is a mystery.

• Group creation ESXi 4 port with respect to the host only vSwitch

  Hi all

  ESX experts out there confirm what the 'group of ports' process is for the creation and how it relates exactly to host only vSwitch?

  I have created a vSwitch1 as host only with no attached NIC (as by the other topic, I found) I want to clone and initialize some test of hot P2V but they don't have any real network connections.

  I use vSphere to do this, and I'm new to ESX...

  You will still need to create a virtual machine on the new vSwitch port group, but if the vSwitch has no physical NIC are attributed to him, then the traffic on this vSwitch will be isolated.

  Dave

  VMware communities user moderator

  Now available - vSphere Quick Start Guide

  You have a system or a PCI with VMDirectPath?  Submit your specifications to Officieux VMDirectPath HCL.

• How can I "attached to tab" summits on an empty right triangle with 3 sides of a different color?

  Hello. Novice HERE. I want to create a right triangle (just three sides, no fill) where each side is a different color (red, blue and green, say). For generality, assume that it is a scalene triangle (rather than isosceles). I want the weight of each line to be about 3 PT (but I guess that's not a crucial number. Let's say that the I want the sides to 20 or 30 thick pts, for the fun of it.) I know how to draw three lines of specified width, make different colors and arrange them in a triangle. My problem is how the vertices (corners) look at attached miter instead of have them overlap, which obviously has terrible air and as something of an infant caught in Microsoft Paint. ;-) If I join the 3 trails in a single form, they are all getting the same color, so I think I should keep as 3 separate lines (paths). The only solution I can think is: rather than draw three lines of weight 3pt, draw three extremely thin rectangle shapes (about 3pt wide), one of each color and do rotate/position them so that they form the sides of a triangle. Then go and do a Visual surgery on the tops to make summits attached miter. Is there an easier or more automated way to reach my goal? Is the answer right under my nose? Thanks in advance!

  1. with the pen tool draw the right scalene triangle.

  2. choose the desired race weight, no fill.

  3 object > Expand stroke.

  4. with the scissors tool, click on all six anchor points.

  5 object > ungroup (CMD/CTRL + SHIFT + G), object > Compound Path > release (CMD/CTRL + OPT / ALT + SHIFT + 8)

  6. Select the pair of line for a leg segment, object > path > join (CMD/CTRL + J) twice; Repeat for the other leg and the hypotenuse.

  7. fill each path with the desired color.

• Help and advice with programming side host

  Hi all
  You have to connect the Java Card reader (+ Java Card!) for a powered ARM embedded system under Debian Linux.
  Now we must essentially the host program that sends the APDU to the card and receive responses from the card.
  This program must be in C.
  
  I have been coding bits of Java Card on my Windows laptop and have been the installation using GPshell.
  
  I have the card and the following card reader:
  (a) 3310 SCR from SCM Microsystems - smart card reader
  (b) Cyberflex access 64 k v2c Gemalto (formerly Axalto)-Java Card (JC Supports 2.1.1 and global platform 2.0.1)
  
  My question is this:
  Time to test my applet, I use GPshell commands. GPshell works with Linux (powered by an ARM processor)
  
  I understand that the global platform is a library and can be used to program the side host to communicate with the card chip. Can it be compiled for Linux? I have no idea how I'd do for an ARM based system.
  
  I'm very fragile on the host side of things party. Please throw much light on this piece as possible - it will save me a lot of heartburn later, believe me!
  
  Before I started working with JC, I was under the impression once the connection with the card setup, to just send the APDU (has the JCWDE emulator) to communicate with the card. I had no idea that we use GPshell for that. So, basically if there's another way that supports APDU to and from the card that works for linux (I think that PC/SC takes care of the APDU) that would do the trick and I guess that what I do Id of GPshell under Windows, could do with this other way on Linux.
  
  Help, please.
  Very much appreciated.
  Thank you very much in advance.
  
  See you soon

  Hello

  First of all, your host application must be able to load and install the cmdlets, or do you just need to communicate with a card that has your preloaded applet? The answer to this will help determine what you need on your Linux machine.

  If you do not need to load the applet, you can use pcsc - lite (it's the port of PC/SC for Linux/Unix http://www.linuxnet.com/middle.html). This can be included in your distribution or you can easily compile from source. GPShell uses the GlobalPlatrform library that uses a PC/SC to communicate with your card. If you are not loading of applets, then you can skip the wrappers and use PC/SC directly.

  You were correct in your original hypothesis. When you have a connection to the card, you simply send APDU. There are a number of ways to do this, but they all eventually go through PC/SC. Most are simply a wrapper that makes things more convenient (smartcardio) while others are just a language Binder or wrapper (jpcsc). You don't need to use GPShell once you have an applet on your map. This is mainly used for creating scripts to load and sometimes to personalize a card. I wouldn't use this for most of this. Because it looks like an embedded Linux platform, you should keep your host as light weight as possible and go directly with PC/SC.

  You could start working on your application host using PC/SC and may compile it for windows and linux. You can watch the GlobalPlatform source to see how they did it (it is compilable for both and I've also compiled for OS X). The only real problem of memory is the include for pcsc headers path.

  See you soon,.
  Shane

• Problem with server-side includes

  Hi - I have a page with two php includes no longer correctly display. They were great when I got to the top, and I have not changed anything.  They are not displayed online - and also do not appear on my local server (Apache).  I have same code on other websites which display correctly, on my server and online.  There is nothing wrong with the paths to files as they will be displayed correctly on the screen of DW, and also on the live view, so I'm completely baffled.

  Anyone can shed some light?

  Here is an example of a page- http://www.lucidinsight.com/travelprev.shtml

  Understand that both should be displayed on the right side of the page (so the two error messages)

  Thank you!

  If it is hosted on the same servers that works? If I save a file .shtml with php scripts, it does not address on one of my servers. The other is classic asp, so I can not test it. But on that has php, ssi are not treated, but I do not get an error. I create a simple SSI and use the [an error occurred while processing the directive] on a test page and see if it works. Easy way to test what booth said.

  Jim

• PREL 09 - creation of the video with the endings of empty time.

  Hi guys,.

  I'm new on this forum and first elements both 9 but I hope you can help.

  I created a video with a length of 1 min 17seconds, but whenever I create video his 1 min 17sec of content followed by another 3 minutes of nothing.

  #Can any that offer advice on how I can remedy this?

  Thank you

  James

  You have certainly a few stray video images on your timeline.

  Press the-key on your keyboard (above your enter key). This will show you your entire timeline film. It is likely that it is show you three minutes of empty area beyond your current project.

  Click and drag your timeline, in the area beyond your project, and then press DELETE. Press then on the-button again. Keep doing this until you have cleaned all the errant video frames your mounting left side beyond your project.

• Creation of the OSB with WLST field

  Hello
  
  I am trying to create a domain using WLST script for version 10.0 on redhat 5.0.
  The WLST script invoked by the ANT, creates a simple field of OSB, with only adminserver, with workshop and bus applications service.
  
  I understand JMS Reporting provide needs table in the schema for logging and this application is also created in the field, when I create the field.
  
  Assuming that the schema for the reporting application is not created yet, when I try to start weblogic domain, he complains about file "weblogic_eval$ 1.wal" in the root directory, I know that this file is created if I create a domain by using the configuration wizard and run scripts of creation of OSB scheme during the domain design process , instead I think that he should complain connection due to schema error is not available?
  
  My Questions:
  
  1. What is the best way to create a schema for the application in question, during field automated build process that we need to create new areas of the script and be able to start and deploy applications on it. which will also require to have the db for the application schema.
  
  2. what happens if I create a db schema oracle report or any other database other separately then pointbase so how to avoid the error file ' weblogic_eval$ 1.wal ' to complain? What practice is in place or recommended for my situation necessary?
  
  Thanks in advance!
  
  SAL

  My fault. http://download.Oracle.com/docs/CD/E13222_01/WLS/docs90/config_scripting/domains.html#1001249--je mistaken or I don't know how to operate in offline mode.

  Another suggestion is to use templates to create domains (that I tried on my local machine now) and can be easily automated.

  (1) model of domain created (http://download.oracle.com/docs/cd/E13222_01/wls/docs90/config_scripting/reference.html#1029279, http://download.oracle.com/docs/cd/E13222_01/wls/docs90/config_scripting/reference.html#1203320)

  (2) change of the /config/config.xml in the container of the template to remove (Reporting of JMS provider, Message Reporting trap) and other changes

  (3) used the jar model modified to create new areas.

  Maury

  Published by: mneelapu on October 23, 2009 15:45