Creation of database connection

Similar Questions

• Database connection - error of creation of the admin user Setup. No route to host

  During step 2: configuration of the database connection we select the "internal database".
  After a short delay, we get a message saying "error of creation of the admin user. No route to the host.
  I have been more before DNS records and back and everything seems in good condition.
  Can someone point me in the right direction to solve this error?
  

  This is an SSL certificate error. Have you changed the default self-signed SSL certificates?

• Creation of database of cluster requires default listener configured and executed in grid House Infrastructure.

  Hello!

  I created the new database with DBSA in configuration RAC (NŒUD 2)
  Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit

  Release of Red Hat Enterprise Linux Server 5.8

  Requirements has successfully passed:

  [oracle@db1-mng ~] $ cluvfy stage - pre dbcfg - n mng - db1, db2 - mng - d
  /U01/app/Oracle/product/11.2.0.3/dbhome_1

  Perform preliminary checks for database configuration

  Check accessibility of node...

  Accessibility of node check from node "db1 - mng.

  Check the user equivalence...

  User equivalence check passed for user 'oracle '.

  Verify node connectivity...

  Checking hosts config file...

  The hosts config file verification successful

  Check: connectivity interface node 'bondeth0 '.

  Connectivity node passed to the interface 'bondeth0 '.

  Check the TCP connectivity to subnet "10.116.176.196."

  Check: connectivity interface node 'bondib0 '.

  Connectivity to the node passed to the interface 'bondib0 '.

  Check the TCP connectivity to subnet "192.168.18.10."

  Checking consistency of subnet mask...

  Consistency of subnet mask check passed for subnet
  '10.116.176.196 '.

  Consistency of subnet mask check passed for subnet
  '192.168.18.10 '.

  Verification of consistency for the last subnet mask.

  Check the passed node connectivity

  Checking for multicast communication...

  Check "10.116.176.196" for multicast communication subnet with
  Multicast group '230.0.1.0 '...

  Subnet check "10.116.176.196" for multicast communication with
  from '230.0.1.0' multicast group

  Check "192.168.18.10" for multicast communication subnet with
  Multicast group '230.0.1.0 '...

  Subnet check "192.168.18.10" for multicast communication with
  from '230.0.1.0' multicast group

  Control of transmitted multicast communication.

  Total memory check passed

  Check the available memory

  Checking space last swap

  Check the disk space free past for
  'db1-mng:/u01/app/oracle/product/11.2.0.3/dbhome_1 '.

  Check the disk space free past for
  'db2-mng:/u01/app/oracle/product/11.2.0.3/dbhome_1 '.

  Free disk space for audit "db1 - mng: / tmp '.

  Free disk space for audit "db2 - mng: / tmp '.

  Check for multiple users with the value of the UID 1000 ago

  Check for existence of user for 'oracle '.

  Existence of group check passed for "oinstall".

  Existence group check passed for "dba".

  Membership check for user 'oracle' in group 'oinstall' [as principal]
  past

  Membership to check for 'oracle' user group 'dba' spent

  Run control the level of the past

  Hard deadline check passed for "maximum open file."
  "descriptors of '.

  Verification of limits soft for "maximum open file."
  "descriptors of '.

  Hard limits check passed for "maximum user process.

  The soft limits check passed for "maximum user process.

  The system architecture check past

  Check the version of the kernel spent

  Kernel parameter check passed for "semmsl.

  Kernel parameter check passed for "semmns.

  Kernel parameter check passed for "semopm.

  Kernel parameter check passed for "semmni.

  Kernel parameter check passed for "shmmax.

  Kernel parameter check passed for "shmmni(5)."

  Kernel parameter check passed for "shmall.

  Kernel parameter check passed for 'file-max.

  Kernel parameter check passed for "ip_local_port_range.

  Kernel parameter check passed for "rmem_default."

  Kernel parameter check passed for "rmem_max.

  Kernel parameter check passed for "wmem_default."

  Kernel parameter check passed for "wmem_max.

  Kernel parameter check passed for "aio-max-nr.

  Existence of package check passed to 'make it '.

  Existence of package check for "binutils".

  Existence of package check passed for "gcc (x86_64).

  Existence of package check for "libaio (x86_64).

  Existence of package check for 'glibc (x86_64).

  Existence of package check passed for
  "compat-libstdc ++-33 (x86_64).

  Existence of package check passed for
  "elfutils-libelf (x86_64).

  Existence of package check passed for "elfutils-libelf-devel '.

  Existence of package check passed for 'glibc-common ".

  Existence of package check for 'glibc-devel (x86_64).

  Existence of package check for ' glibc headers.

  Existence of package check passed for "gcc - c++ (x86_64).

  Existence of package check for "libaio-devel (x86_64).

  Existence of package check for 'libgcc (x86_64).

  Existence of package check for 'libstdc ++ (x86_64).

  Existence of package check passed for
  'libstdc ++ - devel (x86_64).

  Existence of package check for "sysstat".

  Existence of package check for 'ksh '.

  Check for multiple users with the value of the UID 0 passes

  ID of current group check passed

  Audit of departure for the coherence of the primary root group
  user

  Check the consistency of the primary group of the user root past

  CRS checking the integrity...

  Consistency of version Clusterware spent

  Checking the integrity of the src passed

  Checking node application existence...

  Verification of the existence of the node VIP application (required)

  VIP application node check past

  Verification of the existence of the application of NETWORK node (required)

  Application node passed control NETWORK

  Verify the existence of GSD (optional) application node

  Application node GSD is in offline mode on nodes "mng - db1, db2 - mng"

  Verification of the existence of the application of ONS node (optional)

  ONS node application check past

  Check the consistency of zone past

  Check beforehand for the database configuration was successful.

  ------------------------------------------

  [oracle@db1-mng ~] $ ps - aef | grep lsnr

  10435 1 0 2014 Oracle?        00:09:57
  /U01/app/Oracle/product/11.2.0.3/dbhome_1/bin/tnslsnr LISTENER
  -inherit

  10447 1 0 2014 Oracle?        00:14:10
  /U01/app/11.2.0.3/grid/bin/tnslsnr LISTENER_SCAN1-inherit

  Oracle 58226 74449 14:00 0 pts/0 00:00:00 grep
  LSNR

  ------------------------------------------

  [oracle@db1-mng ~] $ lsnrctl LISTENER status

  LSNRCTL for Linux: Version 11.2.0.3.0 - Production on 16 April 2015
  11:56:48

  Connection to
  (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = LISTENER)))

  STATUS of the LISTENER

  Alias LISTENER

  Settings for the listen port file
  /U01/app/Oracle/product/11.2.0.3/dbhome_1/network/admin/listener.ora

  Log file of listener
  /U01/app/Oracle/product/11.2.0.3/dbhome_1/log/diag/tnslsnr/db1-MNG/listener/alert/log.XML

  Listen to endpoint points summary...

  (DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = LISTENER)))

  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=10.116.176.129) (PORT = 1521)))

  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=10.116.176.100) (PORT = 1521)))

  Summary of services...

  Service '+ ASM' a 1 instance (s).

  Instance '+ ASM1' READY State, has 1 operation for this
  service...

  Service 'COM' has 1 instance (s).

  Instance "COM1", State LOAN, has 1 operation for this
  service...

  Service 'COMXDB' has 1 instance (s).

  Instance "COM1", State LOAN, has 1 operation for this
  service...

  'PM' service has 1 instance (s).

  Instance "PM1" READY State, has 1 operation for this
  service...

  Service 'PMXDB' has 1 instance (s).

  Instance "PM1" READY State, has 1 operation for this
  service...

  Service 'TEST' has 1 instance (s).

  Instance "TEST1", State LOAN, has 1 operation for this
  service...

  Service 'TESTXDB' has 1 instance (s).

  Instance "TEST1", State LOAN, has 1 operation for this
  service...

  The command completed successfully

  ----------------------------

  [oracle@db1-mng ~] $ lsnrctl status LISTENER_SCAN1

  LSNRCTL for Linux: Version 11.2.0.3.0 - Production on 16 April 2015
  14:12:13

  Connection to
  (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = LISTENER_SCAN1)))

  STATUS of the LISTENER

  Alias LISTENER_SCAN1

  Settings for the listen port file
  /U01/app/11.2.0.3/grid/network/admin/listener.ora

  Log file of listener
  /U01/app/11.2.0.3/grid/log/diag/tnslsnr/db1-MNG/listener_scan1/alert/log.XML

  Listen to endpoint points summary...

  (DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = LISTENER_SCAN1)))

  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=10.116.176.197) (PORT = 1521)))

  Summary of services...

  Service 'COM' has 2 occurrences.

  Instance "COM1", State LOAN, has 1 operation for this
  service...

  Instance "COM2", State LOAN, has 1 operation for this
  service...

  Service 'COMXDB' has 2 occurrences.

  Instance "COM1", State LOAN, has 1 operation for this
  service...

  Instance "COM2", State LOAN, has 1 operation for this
  service...

  'PM' service has 2 occurrences.

  Instance "PM1" READY State, has 1 operation for this
  service...

  Instance "PM2", State LOAN, has 1 operation for this
  service...

  Service 'PMXDB' has 2 occurrences.

  Instance "PM1" READY State, has 1 operation for this
  service...

  Instance "PM2", State LOAN, has 1 operation for this
  service...

  Service 'TEST' has 2 occurrences.

  Instance "TEST1", State LOAN, has 1 operation for this
  service...

  Instance "TEST2", State LOAN, has 1 operation for this
  service...

  Service 'TESTXDB' has 2 occurrences.

  Instance "TEST1", State LOAN, has 1 operation for this
  service...

  Instance "TEST2", State LOAN, has 1 operation for this
  service...

  The command completed successfully

  ------------------------

  Also successful on the second node db2 - mng to LISTENER_SCAN2, LISTENER_SCAN3.

  When I try to run the command "dbca responsefile - /home/oracle/PR/PRN.rsp-silent ' displays an error:

  Creation of database of cluster requires the default listening port configured and
  currents of the Home Network Infrastructure. Use NETCA in grid Infrastructure - home
  "/ u01/app/11.2.0.3/grid" to set up a front listening port
  instance.

  RAC-database now works in production. Manipulation of the Junk listener.

  How can I get around the error?

  In particular all databases have been created in the same way, the truth, about a year ago.

  Thank you, Thomas! I chose the first method) OK

• RC-00118: an error occurred during the creation of database

  Pls I need help to successfully clone my database
  Operating system is Linux 4.0 11.5.10.2 Application and database is 9.2.0.6
  
  The question is try to clone the E-busines suit application using the Rapid clone. Am Note 230672.1
  Whenever the adcfgclone.pl on the DB layer runs up to 70% it-error with the following message, while the database is created:
  
  
  Clone of fast running with the command:
  Perl /s03/FIN/findb/9.2.0/appsutil/clone/bin/adclone.pl java=/s03/FIN/findb/9.2.0/appsutil/clone/bin/... /JRE mode = apply... component stage=/s03/FIN/findb/9.2.0/appsutil/clone/bin/ = method = dbctxtg=/s03/FIN/findb/9.2.0/appsutil/FIN_aqherp.xml contextValidated = true showProgress CUSTOM dbTier
  
  Beginning database layer apply - Thu Feb 26 14:29:24 2009
  Logfile located at /s03/FIN/findb/9.2.0/appsutil/log/FIN_aqherp/ApplyDBTier_02261429.log
  RC-50004: Fatal: error in ApplyDatabase:
  Creating control files is not
  
  ERROR when executing apply...
  
  ERROR: Cannot run /s03/FIN/findb/9.2.0/appsutil/clone/bin/adclone.pl
  [oracle@aqherp bin] $ vi /tmp/CloneContext_0226021337.log
  [oracle@aqherp bin] $ vi /s03/FIN/findb/9.2.0/appsutil/log/FIN_aqherp/ApplyDBTier_02261429.log
  ADX database utility
  ---------------------------------------------------------------
  
  getConnectionUsingAppsJDBCConnector()->
  APPS_JDBC_URL = "null".
  Try to get by using connection based SID connect descriptor
  getConnection()->
  sDbHost: aqherp
  sDbDomain: qudrah.com
  sDbPort: 1522
  sDbSid: END
  sDbUser: APPS
  Try to connect using SID...
  getConnectionUsingSID()->
  JDBC URL: jdbc:oracle:thin:@aqherp.qudrah.com:1522:FIN
  Exception occurred: java.sql.SQLException: IO exception: the network adapter could not establish the connection
  Try to connect using SID as ServiceName
  getConnectionUsingServiceName()->
  URL JDBC: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=aqherp.qudrah.com)(PORT=1522))(CONNECT_DATA=(SERVICE_NAME=FIN)))
  Exception occurred: java.sql.SQLException: IO exception: the network adapter could not establish the connection
  Try to connect using SID as ServiceName.DomainName
  getConnectionUsingServiceName()->
  URL JDBC: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=aqherp.qudrah.com)(PORT=1522))(CONNECT_DATA=(SERVICE_NAME=FIN.qudrah.com)))
  Exception occurred: java.sql.SQLException: IO exception: the network adapter could not establish the connection
  Connection could not be obtained; return null
  
  Database utility - ADX finished-
  
  RC-00118: an error occurred during the creation of database
  Asked by oracle.apps.ad.clone.ApplyDatabase
  
  
  StackTrace:
  java.lang.Exception: control file creation failed
  to oracle.apps.ad.clone.ApplyDatabase. < init > (ApplyDatabase.java:661)
  to oracle.apps.ad.clone.ApplyDatabase. < init > (ApplyDatabase.java:328)
  to oracle.apps.ad.clone.ApplyDatabase. < init > (ApplyDatabase.java:304)
  to oracle.apps.ad.clone.ApplyDBTier. < init > (ApplyDBTier.java:154)
  at sun.reflect.NativeConstructorAccessorImpl.newInstance0 (Native Method)
  at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
  at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
  at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
  at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:68)
  at java.lang.Thread.run(Thread.java:534)
  
  Thank you
  SG

  SG,

  Level application/database source nodes are you referring? If so, you can go ahead and run AutoConfig on the application tier.

  Kind regards
  Hussein

• Database connectivity Kit

  Hello

  I use the database connectivity toolkit to create a Microsoft access database.  I'm new to the Toolbox.  I've read the tutorials online and following the instructions.  I created an empty Microsoft Access file with an .mdb extension.  I also created a link to data .udl with tools > create data... in LabView and linked to the mdb file.  My code VI is attached.  I get the following error when I run the program (also attached).  I don't know what causes this error.  I appreciate your help.

  Thank you

  You can not create a table with the name "table".  It is a key word.

• Reading large data using the database connectivity

  Hello

  I use the Labview database connectivity toolkit to connect to my database sqlitev3 (I'm using ODBC). I just have to connect to the database (using the block of open_connection) and read all the values inside (using the select_data block). The problem is that my database is huge (about 2 GB), and I get this error:

  . VI NI_Database_API.lvlib:Rec FETCH Recordset Data (R)-> NI_Database_API.lvlibB Tools Select Data.vi-> real_web.vi-> real_web.vi.ProxyCallerADO error: 0x8007000E Exception occurred in provider: not enough memory is available to complete this operation. in .vi NI_Database_API.lvlib:Rec Fetch Recordset Data (R)-> NI_Database_API.lvlibB Tools Select Data.vi-> real_web.vi-> real_web.vi.ProxyCaller

  What should I do? It seems that he reads the data in the memory and it doesn't have enough space for it. When I read the data I want to write to a file.

  

  Read it in pieces. Write each piece to the file, and then repeat with the next segment. Try to read and process all data in one shot is not very practical and you found out will not work.

• problem to generate an installation program for a project of database connectivity

  Hello

  I create a project using labview 2011, this project all simply select, edit and insert a file of access database by using the database connectivity Toolkit.

  There is no problem when I run this labview project, everything is perfect, but when I create a Setup program to run this project from another computer, I found something strange...

  the project do not insert or update the database, but it may choose the form, so I can say that the connection is good, so can any body tell me what is the problem.

  Help, please

  Thank you

  
  

• How to send the SQL for SQL Server statement and return data without using database connectivity Kit?

  Hi, I tried to figure out how to extract data from my SQL Server databases and reading messages and to do some tests with examples, I can get data connection type in my SQL server, but so far nothing helps.  Is it possible to get data from a SQL Server database without using the database connectivity Toolkit?  and if so, how?  are there whitepapers and/or examples of this?  So far, I can't find something that works.  Thank you.

  Jesse - what is your reason for not using the database connectivity Toolkit? It is by far the best way to recover the data.

• Problem installation database connectivity Kit

  My company manufactures in several factories around the world.  I have a problem in China and that you want to debug, and because the code is distributed in the form of exe, it is a problem.  My approach was to install a trial license of 30 days of LV2010 SP1, intend to withdraw when debugging is done.  So far, so good.  The problem is that the application requires the database connectivity Toolkit.  I downloaded a copy and tried to install.  It says it can't install because LV2010 is not installed.  Is it because of the eval license?

  If I wanted to rewrite hundreds of applications running, I could do that, but what I want is to install the DB Toolkit for a bit of troubleshooting.

  If NEITHER would alter the conditions on their license server, I would not have these problems.

• Database connectivity error: ADO...?

  I'm trying to export data in an Oracle database local using the Toolbox Database Connectivity.

  (I created my TEST table in the local Oracle database, I can access, write, read, etc. using SQL.) I also have the .dsn file that works with SQL)

  I get the following error:

  

  I found the problem. Not associated with LabVIEW (Duh...).

  Basically I have two copies of .tns names in two different folders. One of the files that I used to make a connection

  to the database did not have the correct login info and the other did. One who did was one I used.

• database connection status indicator

  I want to put something on the front of my program which will indicate the status of database connection. I think to ask at the tables in the list (it should be displayed), if the connection is good, it shows error. I tried and I think it works very well, but I don't know if it's the right way to do it, there may be better ways there, could someone point out he for me?

  Best regards

  You certainly don't want to open and close the connection. Maybe it will fail, but the 'real' connection is good. Maybe the real one has failed but this other works opening and closing. This could happen if the server has the maximum number of connections.

  Your connection is little go far?

  A simple method to check the connection just must have a loop that executes periodically a meaningless statement.

  

• Calling stored procedures with parameters with the database connectivity Toolkit

  Hi all

  I'm new to the forum and struggling to find a solution to a particular problem I have in this respect, using the LabVIEW Database Connectivity Toolkit on a project, I am currently working on my work.  I have a database in which I tables and stored procedures with parameters.  Some of these stored procedures have input, output and return parameters.

  I tried to follow this example, but to no avail: http://digital.ni.com/public.nsf/allkb/07FD130746083E0686257300006326C4?OpenDocument

  Such a stored procedure I am working on the implementation is named "dbo.getAllowablePNs", running "SELECT * from DeviceType" (DeviceType is the table).  In this case, it requires no input parameter, it has an output parameter that generates the table [cluster] and has a return parameter that returns an integer value (status code for execution) to show if an error occurred.  The DeviceType table has 3 columns; ID (PK, int not null), PN (nvarchar ((15), null) and NumMACAddresses (int, null).)  I have surpassed many examples and I talk to the support OR try to implement this and similar procedures stored in LabVIEW but have not been successful.  I am able to connect to the database with the VI of open connection without error, but spin in some confusion as a result of this step.  I then try to use the VI of parameter query create to call the stored procedure and set the parameters.  I guess I would then use the Set parameter value for each parameter that is connected to the entry of parameters on the previous query with parameters VI VI?  I am also having some confusion during and after these steps as well.  I would greatly appreciate advice or suggestions that anyone could have in this situation because I am not a SQL expert.  Also, I would be happy to provide more information that might be useful.

  Kind regards

  Jon

  Here's what I use to do this.  I think I had to change him create parameterized query VI for him to work.  There is a post on the forum about this somewhere.

  

• Database connectivity broken vi Toolkit

  Hi all

  I upgraded from LV 8.5 to 8.6 (windows XP platform) a couple of weeks and have had no problems until today when all of sudden my vi toolkit database is coming from broken, with: "one or more of the inputs needed for this function are not wired or are wired incorrectly. Display the context-sensitive Help window to see what should be the connections to this function. ' Mistakes however is not the case on all my vi using the objects in the Toolbox.

  Measures taken so far without success:

  1 mass compilation of my vi

  2 mass compilation of database Toolbox

  3 re install Database Resource Kit

  4 mass compile the directory vi.lib

  5 in the old knowladge base article Document ID: 2RO7J544, assured the latest microsoft MDAC is installed.

  Any help is appreciated as we use this receptive toolkit.

  Thank you

  Chris

  PLATES

  Hi Chris,

  Thanks for the reply and I hope that your well.

  I need to try to understand something, when you say that the LabVIEW 8.6 upgrade have you improved the Toolbox?

  Toolkit LabVIEW Database Connectivity 1.0.2 is for LabVIEW 8.6. If, on the other hand your trying to use LabVIEW 8.6 with DC Toolkit 1.0.1 so I think that they are not officially compatible. However, these links may be of interest knowledge base: (after all, they are just screws). However, to say this - if you read the Readme for the new toolkit, that many things have changed for LabVIEW 8.6 - so becareful.

  You will have to manually copy all the files in one version of LabVIEW to another. Use the following instructions to achieve:

  1. Install the database connectivity toolset to the version of LabVIEW, say X.
  2. Copy the following files/directories in the directories right in the latest version of LabVIEW, say Y.
     • Copy the data directory from \LabVIEW X\vi.lib\addons\ to \LabVIEW Y\vi.lib\addons\
     • Copy the file database.llb \LabVIEW X\project\ to \LabVIEW Y\project\
     • Copy the data directory from \LabVIEW X\examples\ to \LabVIEW Y\examples\

  OR also check this,

  Installation of toolkits for use with several Versions of LabVIEW:

  http://digital.NI.com/public.nsf/allkb/58BE852CB35237C786256A290079DF39?OpenDocument

  Other questions that you may have encountered,

  Database connectivity tools claims are a polymorphic Subvi Broken

  http://digital.NI.com/public.nsf/allkb/0FA97221637E74CA86256C7C005069A5?OpenDocument

  "Update to the latest MDAC will solve this problem."

  I would also check that you have installed the Toolkit for LabVIEW 8.6 - toolkits are now specific for labVIEW 8.6. Then maybe try to reinstall and the Toolbox for LV8.6.

  Hope this helps and please let me know (Please specify a little more).

• developing android runtime database connection error

  Hello Mr President

  My android project works normally, but when I have the blackberry port it shows error like this

  01-01 14:22:57.946: I/Database (32850050): sqlite returned: error code = 1, msg no = no such table: android_metadata
  01-01 14:22:57.947: E/Database (32850050): regional settings SELECT FROM android_metadata failed
  01-01 14:22:57.949: E/Database (32850050): failure of the function setLocale() during construction, the closing of the database
  01-01 14:22:57.949: E/Database (32850050): android.database.sqlite.SQLiteException: no table of this type: android_metadata
  01-01 14:22:57.949: E/Database (32850050): at android.database.sqlite.SQLiteDatabase.native_setLocale (Native Method)
  01-01 14:22:57.949: E/Database (32850050): to android.database.sqlite.SQLiteDatabase.setLocale(SQLiteDatabase.java:1987)
  01-01 14:22:57.949: E/Database (32850050): to android.database.sqlite.SQLiteDatabase. (SQLiteDatabase.java:1855)
  01-01 14:22:57.949: E/Database (32850050): to android.database.sqlite.SQLiteDatabase.openDatabase(SQLiteDatabase.java:820)
  01-01 14:22:57.949: E/Database (32850050): to com.whowantto_foot. DataBaseHelper.checkDataBase (DataBaseHelper.java:62)
  01-01 14:22:57.949: E/Database (32850050): to com.whowantto_foot. DataBaseHelper.createDataBase (DataBaseHelper.java:37)
  01-01 14:22:57.949: E/Database (32850050): to com.whowantto_foot.play.onCreate(play.java:144)
  01-01 14:22:57.949: E/Database (32850050): to android.app.Instrumentation.callActivityOnCreate(Instrumentation.java:1050)
  01-01 14:22:57.949: E/Database (32850050): to android.app.ActivityThread.performLaunchActivity(ActivityThread.java:1615)
  01-01 14:22:57.949: E/Database (32850050): to android.app.ActivityThread.handleLaunchActivity(ActivityThread.java:1667)
  01-01 14:22:57.949: E/Database (32850050): to android.app.ActivityThread.access$ 1500 (ActivityThread.java:117)
  01-01 14:22:57.949: E/Database (32850050): to android.app.ActivityThread$ H.handleMessage (ActivityThread.java:931)
  01-01 14:22:57.949: E/Database (32850050): to android.os.Handler.dispatchMessage(Handler.java:99)
  01-01 14:22:57.949: E/Database (32850050): to android.os.Looper.loop(Looper.java:123)
  01-01 14:22:57.949: E/Database (32850050): to android.app.ActivityThread.main(ActivityThread.java:3687)
  01-01 14:22:57.949: E/Database (32850050): at java.lang.reflect.Method.invokeNative (Native Method)
  01-01 14:22:57.949: E/Database (32850050): to java.lang.reflect.Method.invoke(Method.java:507)
  01-01 14:22:57.949: E/Database (32850050): to com.android.internal.os.ZygoteInit$ MethodAndArgsCaller.run (ZygoteInit.java:841)
  01-01 14:22:57.949: E/Database (32850050): to com.android.internal.os.ZygoteInit.main(ZygoteInit.java:599)
  01-01 14:22:57.949: E/Database (32850050): at dalvik.system.NativeStart.main (Native Method)

  I counld not find why it gives this error

  Thanks in advance

  Hello

  Are you copy of database of claim file to the runtime or creation of database during execution?

  If you create new DB to the runtime, by default 'android_metadata' the table is created.

  If you copy the database to make the folder, you must create this table. before packing db with your application. create table 'android_metadata' to help after SQL command "CREATE TABLE android_metadata (TEXT of locale)". I thing this solution works for you.

• I use windows 7 64-bit edition Home premium and I cannot connect to access database in java program.it shows error database connection driver not installed.

  I am using windows 7 64 bit home premium I installed ms office 2007 and did all the settings.
  but I am unable to connect to the Access database in java program.it shows error database connection driver not installed.
  Please give me the solution...

  Hello

  I suggest you to ask your question about Java programming forums on the subject.

  https://forums.Oracle.com/Forums/Forum.jspa?forumid=922

  You can also ask your question on the forums to access.

  http://answers.Microsoft.com/en-us/Office/forum/access?page=1&tab=all&TM=1349633636662