Database connectivity error: ADO...?

I'm trying to export data in an Oracle database local using the Toolbox Database Connectivity.

(I created my TEST table in the local Oracle database, I can access, write, read, etc. using SQL.) I also have the .dsn file that works with SQL)

I get the following error:

I found the problem. Not associated with LabVIEW (Duh...).

Basically I have two copies of .tns names in two different folders. One of the files that I used to make a connection

to the database did not have the correct login info and the other did. One who did was one I used.

Tags: NI Software

Similar Questions

  • Database connection - error of creation of the admin user Setup. No route to host

    During step 2: configuration of the database connection we select the "internal database".
    After a short delay, we get a message saying "error of creation of the admin user. No route to the host.
    I have been more before DNS records and back and everything seems in good condition.
    Can someone point me in the right direction to solve this error?
    HW-Error.jpg

    This is an SSL certificate error. Have you changed the default self-signed SSL certificates?

  • Database connect error

    Hi all

    I am usinf 10.2.0.1.0 Oracle.

    When I try to connect to the database as "CONNECT SYS/***@oradb as sysdba;"
    It connects very well.
    But when I connect with the diagram of the system I have my error as:
    ERROR:
    ORA-01033: ORACLE initialization or shutting

    But when I run because:

    SQL > connect sys/sysadm@proddw as sysdba;
    Connected.
    SQL > select status, database_status from v$ instance;

    STATUS DATABASE_STATUS
    ------------ -----------------
    ACTIVE RISE

    I get the status of ACTIVE database.

    that please?
    I am new to oracle.

    Thank you

    Hello

    Is the database in archivelog mode?

    run the command in sqlplus as sysdba below

    list of archive logs

    If you get the o/p as fashion archive

    At the sql prompt

    Try the commands below

    SQL > restore database

    SQL > alter database open;

    Let me know what you see?

    I suggest you read oracle DBA of doc, I think that I have answered the same scenario for you in another thread earlier...

    Concerning

  • developing android runtime database connection error

    Hello Mr President

    My android project works normally, but when I have the blackberry port it shows error like this

    01-01 14:22:57.946: I/Database (32850050): sqlite returned: error code = 1, msg no = no such table: android_metadata
    01-01 14:22:57.947: E/Database (32850050): regional settings SELECT FROM android_metadata failed
    01-01 14:22:57.949: E/Database (32850050): failure of the function setLocale() during construction, the closing of the database
    01-01 14:22:57.949: E/Database (32850050): android.database.sqlite.SQLiteException: no table of this type: android_metadata
    01-01 14:22:57.949: E/Database (32850050): at android.database.sqlite.SQLiteDatabase.native_setLocale (Native Method)
    01-01 14:22:57.949: E/Database (32850050): to android.database.sqlite.SQLiteDatabase.setLocale(SQLiteDatabase.java:1987)
    01-01 14:22:57.949: E/Database (32850050): to android.database.sqlite.SQLiteDatabase. (SQLiteDatabase.java:1855)
    01-01 14:22:57.949: E/Database (32850050): to android.database.sqlite.SQLiteDatabase.openDatabase(SQLiteDatabase.java:820)
    01-01 14:22:57.949: E/Database (32850050): to com.whowantto_foot. DataBaseHelper.checkDataBase (DataBaseHelper.java:62)
    01-01 14:22:57.949: E/Database (32850050): to com.whowantto_foot. DataBaseHelper.createDataBase (DataBaseHelper.java:37)
    01-01 14:22:57.949: E/Database (32850050): to com.whowantto_foot.play.onCreate(play.java:144)
    01-01 14:22:57.949: E/Database (32850050): to android.app.Instrumentation.callActivityOnCreate(Instrumentation.java:1050)
    01-01 14:22:57.949: E/Database (32850050): to android.app.ActivityThread.performLaunchActivity(ActivityThread.java:1615)
    01-01 14:22:57.949: E/Database (32850050): to android.app.ActivityThread.handleLaunchActivity(ActivityThread.java:1667)
    01-01 14:22:57.949: E/Database (32850050): to android.app.ActivityThread.access$ 1500 (ActivityThread.java:117)
    01-01 14:22:57.949: E/Database (32850050): to android.app.ActivityThread$ H.handleMessage (ActivityThread.java:931)
    01-01 14:22:57.949: E/Database (32850050): to android.os.Handler.dispatchMessage(Handler.java:99)
    01-01 14:22:57.949: E/Database (32850050): to android.os.Looper.loop(Looper.java:123)
    01-01 14:22:57.949: E/Database (32850050): to android.app.ActivityThread.main(ActivityThread.java:3687)
    01-01 14:22:57.949: E/Database (32850050): at java.lang.reflect.Method.invokeNative (Native Method)
    01-01 14:22:57.949: E/Database (32850050): to java.lang.reflect.Method.invoke(Method.java:507)
    01-01 14:22:57.949: E/Database (32850050): to com.android.internal.os.ZygoteInit$ MethodAndArgsCaller.run (ZygoteInit.java:841)
    01-01 14:22:57.949: E/Database (32850050): to com.android.internal.os.ZygoteInit.main(ZygoteInit.java:599)
    01-01 14:22:57.949: E/Database (32850050): at dalvik.system.NativeStart.main (Native Method)

    I counld not find why it gives this error

    Thanks in advance

    Hello

    Are you copy of database of claim file to the runtime or creation of database during execution?

    If you create new DB to the runtime, by default 'android_metadata' the table is created.

    If you copy the database to make the folder, you must create this table. before packing db with your application. create table 'android_metadata' to help after SQL command "CREATE TABLE android_metadata (TEXT of locale)". I thing this solution works for you.

  • database connection error?

    Hi all

    11.2.0.3.11

    AIX6

    I create a link to the help table:

    create synonym EMP on emp@prod1_lnk;

    SQL > select count (*) from EMP;

    COUNT (*)

    ----------

    335556

    SQL > desc EMP

    ERROR:

    ORA-04043: object 'SCOTT '. "' EMP ' does not exist

    How to solve this error desc please? The developers be paranoid when they see it

    Thank you all,

    MK

    Two possible solutions:

    1. Select column_name, data_type of all_tab_columns where table_name = 'TABLE_NAME ';

    2. CREATE OR REPLACE VIEW TMP_VIEW AS SELECT * from emp@prod1_lnk;

    DESCRIBE THE TMP_VIEW

    Concerning

    Girish Sharma

  • I use windows 7 64-bit edition Home premium and I cannot connect to access database in java program.it shows error database connection driver not installed.

    I am using windows 7 64 bit home premium I installed ms office 2007 and did all the settings.
    but I am unable to connect to the Access database in java program.it shows error database connection driver not installed.
    Please give me the solution...

    Hello

    I suggest you to ask your question about Java programming forums on the subject.

    https://forums.Oracle.com/Forums/Forum.jspa?forumid=922

    You can also ask your question on the forums to access.

    http://answers.Microsoft.com/en-us/Office/forum/access?page=1&tab=all&TM=1349633636662

  • Oracle Database Vault ORA-12578 connection error: open TNS:wallet failed (user OS to access the wallet)

    Hi all

    I create a portfolio of oracle and everything works fine until a script is launched by the OS oracle user. (same user that whoever created the store)

    I use authentication external store and inside my script, I do something like a sqlplus / @MYSECURE_TNS.

    However, when I run a script OS another user as a 'data_loading_user' I get the error: Oracle Database Vault ORA-12578 connection error: TNS:wallet open failed

    I would like to know, how I can activate any user on the local host access the portfolio safe to connect to the database.

    Here my current ENV:

    ==================

    Oracle Linux 6.5

    Oracle a Standard 11.2.0.4

    Webtier Oracle 11g

    Database and thin client SQLNET. ORA

    =============================

    SQLNET. WALLET_OVERRIDE = TRUE

    SSL_CLIENT_AUTHENTICATION = FALSE

    SSL_VERSION = 0

    WALLET_LOCATION =

    (SOURCE =

    (METHOD = FILE)

    (METHOD_DATA =

    (DIRECTORY = / u01/app/oracle/owm/wallets)

    )

    )

    Thanks in advance for any help.

    JS

    Hi all

    Tried something out of the blue, that has worked.

    I added the data_loading_user of the user to the group administrator (Group of BONES that created the wallet).

    The I added the read permission to the group, so the permission on the files below were 640:

    # > chmod 640 cwallet.sso

    # > 640ewallet.p12 chmod

    Thank you

    JS

  • SP2-0640: not connected - create database link error Gateway

    While trying to connect through the gateway SQL by using 'Create database link','m ' SP2-0640: not connected "error. Here are the details.

    ====================================================================
    TNSNAMES.ora
    dg4msql =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))
    (CONNECT_DATA =
    (Service_name = dg4msql))
    (HS = OK)
    )
    ====================================================================
    LISTENER.ora
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = dg4msql)
    (ORACLE_HOME = C:\product\11.2.0\tg_1)
    (PROGRAM = C:\product\11.2.0\tg_1\bin\dg4msql)
    )
    )

    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))
    )
    )

    ADR_BASE_LISTENER = C:\product\11.2.0\tg_1
    ====================================================================
    SQLNET.ora
    # This file is actually generated by netca. But if customers can opt for
    # install 'Software Only', this file does not exist and without the native
    authentication #, they will not be able to connect to the database on NT.

    SQLNET. AUTHENTICATION_SERVICES = (NTS)

    NAMES. DIRECTORY_PATH = (TNSNAMES)

    ====================================================================
    initdg4msql.ora
    HS_FDS_CONNECT_INFO = sqlserverip, port / / PMDB
    HS_FDS_TRACE_LEVEL = OFF
    HS_FDS_RECOVERY_ACCOUNT = RECOVERY
    HS_FDS_RECOVERY_PWD = RECOVERY

    ====================================================================
    lsnrctl start outupt
    The State of the application "dg4msql" UNKNOWN, has 1 handler for this service...
    The command has been executed

    ====================================================================
    tnsping output

    Settings file that is used:
    C: \ Product------11.2.0------tg_1------network-admin------sqlnet.ora

    has been used TNSNAMES adapter to resolve the alias
    Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = localhost) (PORT = 1521)) (CONNECT_DATA = (SERVICE_NAME = dg4msql)) (HS = OK))
    OK (20 ms)

    ====================================================================

    creation of link db output

    SQL * more: Production release 11.2.0.2.0 on Lun Ott 8 12:03:08 2012

    Copyright (c) 1982, 2010, Oracle. All rights reserved.

    SQL > CREATE DATABASE LINK dblink PUBLIC CONNECT WITH As IDENTIFIED BY Manager1 USI
    NG 'dg4msql ';
    SP2-0640: not connected.

    most of the foreign bases are case-sensitive and default Oracle moves all uppercase. To keep the name of an object you should always be surrounded by double quotes and make sure tzhat you write the name exactly as it is defined in the foreign database, for example:
    Select 'id' from 'TEST"@ln;

  • recording of errors on a disconnected session database connection?

    Hi all

    I write in an ETL process. I have a little problem with the clause of an insert error log.

    Here's the situation:

    A database is:
    Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production

    Database B is:
    Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi

    I have an A data source table and target a table in database B

    I have a package compiled into database B, which moves the data from A to B.

    A special SQL (running in the database package B) connects errors in an error table on a database link.

    When this SQL statement runs the client session connection to database B is disconnected. whatever the client tool (tried by SQL and SQL Developer * more)

    This happens when I run a SQL statement entirely to within the database B but always log errors to A.

    See the following topics:
    SQL> --verify that the database link is active and the error table is visible:
SQL> select count(*)
  2    from dwstage.customer_address_clean_error@rptent_dlink;

  COUNT(*)
----------
        43

1 row selected.

SQL> --attempt to insert a record that already exists, producing a primary key violation:
SQL> insert into customer_address
  2  (select *
  3   from customer_address where address_id = 18786 );
insert into customer_address
*
ERROR at line 1:
ORA-00001: unique constraint (WORLDKING.PK_CUSTOMER_ADDRESS) violated

SQL> --now the same thing but with logging to the remote table:
SQL> insert into customer_address
  2  (select *
  3   from customer_address where address_id = 18786 )
  4   log errors into dwstage.CUSTOMER_ADDRESS_CLEAN_ERROR@rptent_dlink reject limit 20000;
ERROR:
ORA-03114: not connected to ORACLE


insert into customer_address
*
ERROR at line 1:
ORA-03113: end-of-file on communication channel Process ID: 0 Session ID: 269 Serial number: 40141
    Good things...

    The error table is created with the normal script for Oracle based on the customer_address table

    The tables are identical except for the table of errors being all varchar2 (4000) and that contains the following columns:

    ORA_ERR_NUMBER$
    ORA_ERR_MESG$
    ORA_ERR_ROWID$
    ORA_ERR_OPTYP$
    ORA_ERR_TAG$

    There are no special data types in the table:
    SQL> desc customer_address
 Name                                                                     Null?    Type
 ------------------------------------------------------------------------ -------- --------------
-------
 ADDRESS_ID                                                               NOT NULL NUMBER(12)
 CUSTOMER_ID                                                              NOT NULL NUMBER(12)
 TYPE_CODE                                                                         NUMBER(12)
 FLAT_UNIT_TYPE                                                                    NUMBER(12)
 FLAT_UNIT_NO                                                                      VARCHAR2(10)
 FLOOR_LEVEL_TYPE                                                                  NUMBER(12)
 FLOOR_LEVEL_NO                                                                    VARCHAR2(10)
 BUILDING_PROPERTY_NAME1                                                           VARCHAR2(30)
 BUILDING_PROPERTY_NAME2                                                           VARCHAR2(30)
 LOCATOR_DESC                                                                      VARCHAR2(30)
 LOT_SECTION_NO                                                                    VARCHAR2(10)
 STREET_NO                                                                         VARCHAR2(10)
 STREET_NAME                                                                       VARCHAR2(30)
 STREET_TYPE                                                                       NUMBER(12)
 POSTAL_DELIVERY_TYPE                                                              NUMBER(12)
 POSTAL_DELIVERY_NO                                                                VARCHAR2(10)
 LOCALITY_PLACE_SUBURB                                                             VARCHAR2(40)
 LOCALITY_ID                                                                       NUMBER(12)
 STATE_TERRITORY                                                                   VARCHAR2(30)
 COUNTRY_STATES_ID                                                                 NUMBER(12)
 POSTCODE                                                                          VARCHAR2(10)
 COUNTRY_ID                                                                        NUMBER(12)
 DPID                                                                              NUMBER(8)
 X_COORD                                                                           VARCHAR2(8)
 Y_COORD                                                                           VARCHAR2(8)
 CREATED_BY                                                                        VARCHAR2(10)
 CREATED                                                                           DATE
 UPDATED_BY                                                                        VARCHAR2(10)
 UPDATED                                                                           DATE
 LOCK_VN                                                                           NUMBER(10)
    Any suggestions on how to solve this?

    that runs the package isn't (and shouldn't really) have permissions to see anything, except that the database module B

    The session needs to see the package only. The very idea of the packaging must ensure that the session is not directly access the target table. The package makes the INSERT in the target_table and can also insert into the table of logging of errors.

    You are testing with the SQL commands outside of the package must be able to access the target table and the table of logging of errors. But once you put in a package, the package (probably in the schema to which belongs the target table and the table of logging of errors) will access tables.

    Hemant K Collette

  • Format XP Microsoft JET Database Engine error 80004005 unrecognized database would be...-

    XP Microsoft JET Database Engine error '80004005' Unrecognized database format would be... -Is a message I get. Don't know how to fix it?

    Hello

    Welcome to the community forums of Microsoft and thanks for posting the question. He would be grateful if you could answer a few questions to refine the question.

    1. Once you get this error?

    2. are you aware of changes to the computer before the show?

    3. you use ActiveX Data Objects (ADO) or ODBC to connect to a Microsoft Access database?

    4. This error occurs when you run a specific program or out of order?

    5 are logged as administrator?

    "Your question contains all the required information necessary for us to help you. Please re - write your question, this time make sure you have all the information necessary and we will try to help. »
     
    See this link for more information on:
     
    http://support.Microsoft.com/kb/555375

    Provide more information about the issue so that we can help you.

  • teststand to the remote database connection

    I have a test station in teststand running factory.  I want to log/query a database located on a network server in my installation by ethernet.  Can TestStand using its types of step address/access database this database for viewing and querying records?

    TestStand features of database, including the types of step of database using Microsoft ADO/OLE DB layer and providers installed on a system. Microsoft has an ODBC provider, TestStand can talk to any remote database system that supports the technology of this software. Take a look at the help topic "TestStand Database Fundamentals" in the online help for more information on this. Suggestion of love to look at the example is right on.

    Step TestStand database types are a way to access a database at a high level, but if you want to process the data in a more complex way, you can consider your connectivity database and processing in a code module using the programming language of your choice and call this code of TestStand module.

  • Database connectivity Kit

    Hello

    I use the database connectivity toolkit to create a Microsoft access database.  I'm new to the Toolbox.  I've read the tutorials online and following the instructions.  I created an empty Microsoft Access file with an .mdb extension.  I also created a link to data .udl with tools > create data... in LabView and linked to the mdb file.  My code VI is attached.  I get the following error when I run the program (also attached).  I don't know what causes this error.  I appreciate your help.

    Thank you

    You can not create a table with the name "table".  It is a key word.

  • Reading large data using the database connectivity

    Hello

    I use the Labview database connectivity toolkit to connect to my database sqlitev3 (I'm using ODBC). I just have to connect to the database (using the block of open_connection) and read all the values inside (using the select_data block). The problem is that my database is huge (about 2 GB), and I get this error:

    . VI NI_Database_API.lvlib:Rec FETCH Recordset Data (R)-> NI_Database_API.lvlibB Tools Select Data.vi-> real_web.vi-> real_web.vi.ProxyCallerADO error: 0x8007000E Exception occurred in provider: not enough memory is available to complete this operation. in .vi NI_Database_API.lvlib:Rec Fetch Recordset Data (R)-> NI_Database_API.lvlibB Tools Select Data.vi-> real_web.vi-> real_web.vi.ProxyCaller

    What should I do? It seems that he reads the data in the memory and it doesn't have enough space for it. When I read the data I want to write to a file.

    Read it in pieces. Write each piece to the file, and then repeat with the next segment. Try to read and process all data in one shot is not very practical and you found out will not work.

  • database connection status indicator

    I want to put something on the front of my program which will indicate the status of database connection. I think to ask at the tables in the list (it should be displayed), if the connection is good, it shows error. I tried and I think it works very well, but I don't know if it's the right way to do it, there may be better ways there, could someone point out he for me?

    Best regards

    You certainly don't want to open and close the connection. Maybe it will fail, but the 'real' connection is good. Maybe the real one has failed but this other works opening and closing. This could happen if the server has the maximum number of connections.

    Your connection is little go far?

    A simple method to check the connection just must have a loop that executes periodically a meaningless statement.

  • Calling stored procedures with parameters with the database connectivity Toolkit

    Hi all

    I'm new to the forum and struggling to find a solution to a particular problem I have in this respect, using the LabVIEW Database Connectivity Toolkit on a project, I am currently working on my work.  I have a database in which I tables and stored procedures with parameters.  Some of these stored procedures have input, output and return parameters.

    I tried to follow this example, but to no avail: http://digital.ni.com/public.nsf/allkb/07FD130746083E0686257300006326C4?OpenDocument

    Such a stored procedure I am working on the implementation is named "dbo.getAllowablePNs", running "SELECT * from DeviceType" (DeviceType is the table).  In this case, it requires no input parameter, it has an output parameter that generates the table [cluster] and has a return parameter that returns an integer value (status code for execution) to show if an error occurred.  The DeviceType table has 3 columns; ID (PK, int not null), PN (nvarchar ((15), null) and NumMACAddresses (int, null).)  I have surpassed many examples and I talk to the support OR try to implement this and similar procedures stored in LabVIEW but have not been successful.  I am able to connect to the database with the VI of open connection without error, but spin in some confusion as a result of this step.  I then try to use the VI of parameter query create to call the stored procedure and set the parameters.  I guess I would then use the Set parameter value for each parameter that is connected to the entry of parameters on the previous query with parameters VI VI?  I am also having some confusion during and after these steps as well.  I would greatly appreciate advice or suggestions that anyone could have in this situation because I am not a SQL expert.  Also, I would be happy to provide more information that might be useful.

    Kind regards

    Jon

    Here's what I use to do this.  I think I had to change him create parameterized query VI for him to work.  There is a post on the forum about this somewhere.

Maybe you are looking for

  • Music Apple sorts by 'artists' when "songs" are selected

    I've just updated to the new iOS 10.0.1 on my iPhone 5 and my music is synced from iTunes on my laptop (not Apple music), but whenever I select my music to be sorted by songs on my phone, it's clearly done by artists. I do not understand why, any hel

  • Software problems

    Does anyone know if there is anything I can do to improve my alcatel fire e. I have a number of problems previously reported here, the page rendering problems, menus missing, phone freeze. In short, it's the worst phone I've ever owned. Alcatel are u

  • : 6000 #1 IDE ERROR after disk replacement

    Hi I have a couple of SP6000 and there a mounted DVD/CDRW (UJDA720 model number) who is unable to read the headlines, just hunting all the time that a disk is in the drive. I replaced the drive with 2 identical units called, but I get the message on

  • shared drive several users at the same time

    I have a time capsule 2 TB and do not use the time machine function. Instead, I use it as a hard drive and a WIRELESS router. Now, I have a problem: my Macbook pro has 2 user profiles, but I can't use the drive of the time share at the same time caps

  • How can I change the palette to go directly to the menu of programming in LV8.5?

    I've seen variations of this question, but I do not see the answer, I'd like to see. I want on the Panel back, do a right click and see all available in the submenu "programming."  (Kind of like it was in the old days of LV)  I don't want to right cl