Problem with my projector on Yoga 3 pro tab

Similar Questions

• Install the words with friends on the Yoga 3 Pro

  Cannot install words with friends on my new Yoga 3 Pro (Windows 8.1). Installation requires Adobe Flash Player, but it is already installed. Have seen recommendations to uninstall Windows Update KB3004150 but this update is not present.

  Thank you. These steps did not help, but I found the problem. Your first post was relevant. I downloaded the "PC Apps Store" application. Wrong store! One is labeled "Store". I don't know why no relevant 'PC Apps Store' appears on the initial list of Apps for Windows 8.1 PC.

• Problem with the software Modem on Satellite Pro L40

  I tried to set up a connection Dial-Up Networking on a Satellite Pro L40 running Vista and can't get the modem to talk to the modem from the ISP. The connection appears OK and then you can hear the modem dial, but when the ISP picks up there is a bit of yelling and then my modem abandons the connection and I get the standard vista connection failed box.

  Things I've tried:
  -latest drivers for the 2.1.77.0 modem (and the rest of the system) downloaded from Toshiba and installed OK
  -all the updates of windows installed
  -removal of the modem in the Manager of peripherals and re - install
  -suppression of the agrsmdel.exe and then re-install
  -try different cables to plug into the phone jack
  -several different ISPS and phone numbers
  -reduce the maximum speed of the connection
  -connection to the same ISP with my Satellite L10; works very well never have time!
  -using the windows to diagnose and repair the tool (set last resort!); says that the modem works fine and can not find a problem with the connection

  Is it possible that the update of the BIOS on the laptop would make a difference (currently v 1.60)? I did some research on Google and found messages on various forums, which suggests that the connection between the motherboard and the modem chip is a little doubtful for all the Agere Soft Modem; If the case is it something I can fix myself or I should go for warranty repair?

  Midders

  Hello

  I'm sure that there is no problem with your modem, but with the configuration or even s ISP modem. I recommend you to speak with the support of the ISP.

• Problem with the installation of Paint shop Pro photo X 2 on Vista

  Try to install photo Paint shop x 2 on my notebook, but at the end of installation it freezes and there seems to be a problem with "registration"...
  Corel (provider of the paint shop) now advised me to change some drivers but the links I received are for XP or lower versions.

  Is there anyone who has had the same problem and find the solution?

  I tried already several things (such as the closure of norton, msconfig changes etc)...

  Thanks for your help!

  Hello

  I noticed that not all programs and applications are compatible and support the Vista operating system. Have you checked if this program supports Vista?
  I think that it should be clarified everything first.

  I recommend you contact the manufacturing Pro for troubleshooting paint shop.

  Good luck

• Problems with the pen of the Surface Pro 3 in Photoshop CS6

  I used photoshop CS6 without any problem on my old computer that was connected to a graphics tablet.

  However, I recently bought a new computer windows called Surface Pro 3. Everything works perfectly with the trackpad and touch, but I had some problems with the pen of Surface.

  The feather can if support on the Web, but every time I click on something on any windows with the pen, the whole application hangs and I have to click on the task bar of the computer down to unlock the application.

  It is impossible to work like this. Is there a solution for this problem? It is said that the version of photoshop I have is Adobe Photoshop Version: 13.1.2

  If you have Photoshop CS6 version 13.1.2, which is the version of subscription to Photoshop, you shoule Isstall Photoshop CC 2014 on your surface Pro 3.  It will work smoothly on the surface Pro 3 and you will also have the option have to use Photoshop CC 2014 preference 2 x UI to Photoshop UI scaling upward in size on your Surface Pro 3.

  If you have not a subscription perpetual windows CS6 version should be version 13.0.1.3.  In this case the only way to scale Photoshop UI must have windows do. You need to update your registry windows 8.1 database and add an external Photoshop manifest file in your folder of Photoshop CS6.  For Surface Pro 3 pen to work with Photoshop, you must install the device drivers for the NTig the wintab API support pen.

  You will not be able to use Photoshop without a keyboard appear on the windows screen keyboard is too heavy.  You can use a utility like button to create keys to touch Overlay on Photoshop and use Photoshop without keyboard.

  Betweek 2XUI Adobe scaled areas an ise windows resizing windows scaling of the image of scalet differece as well as the Photoshops UI

  

  A couple of key overlat keyboards may look like this

  

• Problems with Office 2010 and Acrobat 8 Pro

  Good Day All;

  We are in the middle of upgrading Windows XP to Windows 7 with Office 2010 and I was wondering if there are problems with importing Office documents in Acrobat 8 Pro. I discovered that there is some problem with office 201 and designer of the life cycle.

  Any comments would be useful

  Concerning

  Chomp

  Acrobat 8 is not compatible with Microsoft Office 2010 and PDFMaker plugin is not installed. Only Acrobat X is compatible with Office 2010and at that time in 32-bit mode.

  Acrobat 8 is also not officially compatible with Windows 7, once again Acrobat X is the first version to include accreditation for this OS. It will still install, but Adobe cannot guarantee, it will work perfectly in all cases and does not provide any support for this combination installation.

• Problem with printing pdf from Adobe Acrobat Pro

  Hello

  I have Adobe Acrobat Pro 9.4.3.

  PDF-print has always worked a lot, but all of a sudden, there is some kind of problem.

  After you print a "Print to PDF" built-in excel document in MacOS or Adobes printer I have PDFs corruptet when showing them in Adobe Reader/Acrobat, but MacOS software preview shows them correct.

  So there can't be any problem with printing, but the local preview on my computer using Acrobat or Reader. I don't even use the Myriad in document police, I use Verdana.

  

  You say you use Verdana, but you're not. The error message clearly indicates that you use MyriadPro "BOLD".

  You probably recently installed Mac OS X 10.6.7 update that has a bug with OpenType PostScript as "BOLD" MyriadPro fonts. Use the Verdana or another font TrueType or PostScript, or come back to Mac OS X 10.6.6.

  Discover the problem here: http://www.tidbits.com/article/12078

• Problems with DVD/CD-RW on Satellite Pro M series

  After searching the Forum questions / answers, it seems that many users have problems with the carpet * a 841 s UJ which is equipped with several types of Toshiba portable computers and I wonder why someone from Toshiba has not been able to intervene and to produce a final solution.

  In my case, I can not format a CD - RW or a DVD + RW because the message "D:\ is not accessible" and also "incorrect function".

  If DLA is selected in properties, can be as much as to be shown to a format selection window, but "Format failed due to general failure" happens.

  Toshiba installation CD will work OK (I did this several times after losing data on the hard drive) but the writing seems to be beyond the capacity of the disc.

  Does anyone have any suggestions?

  BTW, the deletion of "Upper and Lower Filters" registry that I have seen offered as a solution will not work because there is only one entry for low filter - no higher.

  You try to format the two supports using Windows option or using an application like Nero?
  I can't imagine that there is a serious problem with ODD. Test it with Nero. I'm sure it will work properly.

• Problems with video capture in Final cut pro verses first CS5

  The codec used in the capture of a video of the PCF, I cannot import the FCP in first CS5. Video I get clients who capture video in FCP and then send it to me. Is there a different capture format, they can use or y at - it a codec that is available that does not cost a fortune, working first for windows?

  Yes, I am intimately familiar with P2 and edit in Premiere Pro - I have done so for four years. You don't need drivers for P2 unless you are actually mount the card P2 or the camera to your computer. Premiere Pro will edit the images natively without any additional installation. The applies to all formats that can be recorded to P2, including DV, DVCPRO, DVCPRO 50, DVCPRO HD, and AVC-Intra. If someone offers you a complete workout of the P2 files (folder structure) and you can import and edit all these without additional work around.

• Problems with the graphics card on Satellite Pro M10

  Hi, this is my first post on the forum. I'm not a pro with computers or anything... the problem I have with my laptop is similar to the one in this thread:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26849&TSTART=0

  I spent half the day trying to figure out if my graphics card is broken, but since I'm a newbie with this stuff, I'm still not sure. :(

  This is what makes my M10. I'm trying to describe the symptoms that detailed as possible, but I'm German, so please excuse my lack of words in some places.

  1. when I turn it on, the laptop goes through the BIOS and give me scrambled BACK-screens and a slightly Warped windows loading bar. There is the consistency check, marked by black bars connecting the top of the screen down. After the audit, the screen goes black and nothing happens, or the screen of will just show me consistency check, do nothing. Be that as it may, I have to turn off the power (I think) and restart the laptop.

  2. sometimes the laptop goes through the BIOS checking & conistency with a few graphical shortcomings. The office is anything but shredded when he gets to the screen of the Windows user. The static method is if serious I don't even know where is the button turn off.

  3. sometimes Notepad starts very well, with the only graphic problem being the windows loading bar. When I go into Windows, the laptop pulls me a blue screen and stops immediately.

  4. sometimes, the laptop works fine for about an hour or two. After I rebooted, I have the same problems listed above, once again.

  5. If I open Device Manager and disable the graphics card, the laptop works very well. I have to lower the screen resolution and colors, but I can watch videos on youtube and everything. Finally, the laptop gets very hot on the bottom and the screen goes crazy again, so I turn the damn thing off.

  I don't know what that means! If my graphics card is broken, the screen should be all static, ALL the time? Not just sometimes more,... could sometimes less be some sort of communication problem between the graphics card and cpu? Please help me with this!

  Another thing I'm not sure about, even after reading the thread I linked above - can I replace the graphics card or not? Everyone said something different in the other thread...

  see you soon,
  Cozmo

  Edit: maybe I will add when I got the screen scrambled and everything. I installed Civilization 4, just to check if my satellite pro can handle, and everything went well for a while. The screen then haywire and I rebuilt my whole system, but display problems did not disappear completely. They were gone for almost a month, and now they are 'back' or something.

  Hi Cozmo

  I'm not a technician but here nobody needs technical knowledge to see that there certainly is hardware problem. I also believe that this problem occurs due to the graphics card. Graphics card is part of the motherboard and it cannot be traded separately. The entire motherboard must be exchanged.

  In my opinion, you have two options: either contact the authorized service provider in your country and speak with them, what can be done, or try to get the motherboard used. If you are lucky, you can find it on eBay. I already bought several hardware components for my old Satellite P10 on eBay.

  Sorry Cozmo but I do not see any other logical solution for you.

  Good luck!

• Major display problem with Audition CS5.5 on Surface Pro 4 Tablet

  Hi people,

  I just got a new Microsoft Surface Pro 4 tablet, so I can edit on the go more easily than with my old laptop. I use Audition CS5.5, because I am a podcaster and radio producer, and it works wonderfully for these tasks. Unfortunately, when I installed hearing on this new tablet, I discovered a major compatibility issue. All text and buttons display so small that the program is essentially unusable.

  

  I tried to play with the display settings on the Surface, but they seem to have no effect on hearing. Even when I get the settings "change the size of the text, apps and other elements ' maximum, it has no effect on how the hearing poster (even if she handicap other programs).

  

  So I tried contacting Adobe via Facebook, and everything they said it was "Hi Chris, see if this article helps you to: . http://bit.LY/24jts28 "Thanks , ^ KM. Which I linked to an article from Microsoft. When I went through the troubleshooting process, however, he suggested 1) the same thing, I tried 2) communicating with Adobe or 3) buy the new version of the hearing.

  

  And earlier I tried calling technical support and they told me that they don't offer phone support for tablets.

  I am extremely frustrated. I love this piece of software and it would be ridiculous to pay a monthly subscription for the new version just change the display settings. Was Adobe really this careless with the design of this product, and they have now abandoned it? What can I do to solve this problem?

  Thanks for any help.

  -Chris

  Support should not consider the 4 Surface Pro tablet, from a support perspective, it's a PC.  I'm sorry to hear that you who were respected.

  Richard is correct, in CS5.5 we simply don't HiDPI screens on the piece of road, and you will probably find that's true with many Adobe applications since that time.

  In addition, as Richard has pointed out, in recent versions we did some work to support HiDPI screens as well as some of the capabilities of the touch Surface.  Here are two tweets I sent to a customer showing on my personal 3 Surface Pro:

  C Van Winkle on Twitter: "@DawsAngeles @duringleaves https://t.co/owizvYIbg0".

  C Van Winkle on Twitter: "@DawsAngeles @duringleaves https://t.co/Zw3NI41rMG".

• Problem with the help of Adobe Premiere Pro *.prproj files between PC and MAC?

  Hi, I have finally got myself a MAC with a grunt to replace my PC and installed first Pro CC of the cloud on the Mac.

  I copied the files on my PC, but when I try to open the first Pro CC (*.prproj files) I get the following error:

  "This project has been saved in a newer version of Adobe Premiere Pro and cannot be opened in this version"

  I don't understand, like the MAC and PC versions of first Pro CC have been downloaded from the cloud to Adobe.

  Can anyone offer advice please?

  Hi, Ashton,.

  There is no problem of incompatibility between Mac and PC files (files .prproj) project

  In your case, it is not updated to the version of Premiere Pro that is installed on your Mac. If the creative application cloud shows first as update, try updates to help Premiere Pro > updates... Menu.

  FYI: You should have first installed 2014.2 Pro BUILD 8.2.0 (65)

  Thank you

  Regalo

• Problem with change of speed on Twixtor Pro

  Using Twixtor 5.0 and After Effects CS6 and I am faced with a situation where keyframing speed % change causes the slow images to freeze for several images at once.

  What works:

  1. Drop clip in the new model
  2. Activate the time-remaping and increase the length of the model of a good minute or so longer than the source element
  3. Add Twixtor Pro to clip layer (seems to behave the same if you drop this model into another clip and apply to one)
  4. Set the frame rate to match comp (and extracts)
  5. Other low value, such as 5% % of the speed .

  Clip plays back nice and soft and slow, each picture is interpolated.

  What does not work:

  1. Repeat the above steps... up to 5
  2. Set a keyframe speed 1000%
  3. Playhead ahead before a second, set another keyframe to maintain speed
  4. Move several frames, keyframe speed 5% value

  When I have the clip, after the last change of speed, instead of a nice smooth movement, playback, I get a still picture, then several identical frames, then he jumps again to the next incremental image and so forth - with NO smooth interpolated images. The result, as you can guess, is very jerky.

  If you trash all keyframes and simply leave the speed change to 5, he plays completely smooth. Which is just great, except for the fact that I really want to animate it.

  If someone has encountered this?

  In the backup interval, I use Timewarp, but I'd love to address this issue.

  Hi Rick, I appreciate your persistence to help. It is certainly another way to use the plugin I have ever used in the past, but does not eliminate the need to activate the time-remapping. Certainly not as common as the majority of the tutorials out there, including the Re: Vision.

  Purposes of the argument, I tried this approach, but unfortunately the problem persists. Out of curiosity, there are specific problems that you avoided using the method solid vs apply directly to images?

  If I can dig up my serial number, I'll install the CS6 update following the instructions. I will definitely update this post if I get positive results.

  UPDATE:

  I am pleased to announce the upgrade to 5.1.5 solved the problem!

• Strange problem with the module memory series Satellite Pro 4300

  I have a laptop Toshiba satellite pro 4300 series with 64 MB onboard + 64 MB Module and I want to upgrade my memory to 320 MB. I bought two ram of 128 MB each. I removed the 64 MB module and I put a 128 MB module into the slot (A) one, but I saw that the total memory is 128 MB again.

  I removed the module again and I put the second module in the connector (A), but I saw that the total memory is 128 MB again. After that, I put the two modules in my notebook (Slot A and slot B) but I see that the total memory is 192 MB. This means that it recognizes each module as 64 MB as opposed to 128 MB. Dose anyone know why this happens?
  And what do I do about it?

  Thank you.
  [email protected]

  Hello

  Well, I put t know why this happens. It seems that the 128 MB modules are 64 MB modules. I know that it of strange but I have only this explanation. You are 100% sure that both modules of memory 128 MB?
  In my opinion, you should check the bars of memory if they have 128 MB.

  Good bye

• Connection problem with 10.11.3 on MacBook Pro

  After installing 10.11.3 yesterday, my MacBook Pro is partially unavailable. Outlook does not independently if connected to a fixed network or wifi, and safari is extremely slow (at least, in most of the Web sites). You have this kind of experience? An idea for this type of communication problem? Thank you.

  The solution is the following: you uninstall and then newly install ESET Cyber Security. Subsequently, it seems to work correctly.