Creation of the DSN that is needed to connect the 5.1 vCenter to SQL Server
I'm looking for a simple process, step by step create the DSN that is needed to connect the vCenter Server 5.1 to an already configured SQL database.
It must be simple, still usable by a person who is not a database administrator. He should assume no knowledge of database.
It should be usable on 64 - bit Windows 2008 Server R2 OS when connecting to a SQL Server 2008 R2 database.
It must include ALL the options I have to configure when configuring the DSN, so that later I can run vCenter Server 5.1 installation and Breeze the by.
Screenshots would be too great, but if you have a step by step, that would be great. Some thing that you can go totally illiterate crew of database and they can cross step by step. Docs from VMware do not give enough details and do not point to a good reference.
Hello
Click on Control Panel > administrative tools > Data Sources (ODBC).
Open ODBC connection, select the system DSN tab, and then click Add
Select SQL native client, click on finish
He will ask DSN name, enter the name you want for VC DSN.
Then enter the address database of VC.
Then it will ask for authentication, select which option of your choice, as based on windows or SQL based authentication.
Then click Next and select the correct database that has been created for VC in drop-down option
Finishing and test the connection.
Concerning
Mohammed
Tags: VMware
Similar Questions
-
Access to the BT hotspots.
The place most frequent that I need to connect to a BT hotspot has a problem with the nearest hotspot. Although many sites come they are protected from security and only the nearest BT hotspot is displayed. There are many others, but they are invisible. I think that there is a software that allows you to see several hot spots the. BT are unable to give me the details.This is probably a function of the driver for your wireless card. I would check with the manufacturer of the computer or adapter.
Good luck.
-
I want to install the Commander of the force star wars on my new PC, but says it is not compatible with windows 64-bit. I have try on windows XP mode and it tells me that I need to connect a hardware 3D device. I really love the game and I want to use it again.
Any old copy of Windows XP that could be installed in the host system? If you do not, it should be available at a modest price of an online seller. Perhaps (I'm not too), even an old Windows 98 TO work. The game (using a 3D engine) will not work under pure DOS, so you need a Windows environment so that it can work. Just FYI: If you get this old classic to run, new issues may arise. Known are the "mss32.dll" runtime error (you may need to replace this file with the newer version of SW:KOTOR 1) and the issue of video cutscenes (the games uses an obsolete video codec, Smacker - either you find an old *.) DLLS for it or have you convert movies in a modern format).
In conclusion: get old games to run on software/hardware modern (it is not only a problem of BONE) is one of the most fascinating and rewarding challenges to a real fan. But do not expect it will not be easy "out of the box" (or simply insert a CD).
-
Error code: 0x84BC089B, you try to run the service pack 1 for SQL Server
Original title: Error Code: 0x84BC089B
Received error code: 0x84BC089B tries to run the service pack 1 for SQL Server Express 2008R2.
Hello J lesow,
The question you have posted is related to SQL server and would be better suited on the TechNet support forum. I suggest you to post the question on the following link.
http://social.technet.Microsoft.com/forums/en-us/category/SQLServer
-
How to access a certain date in the date and time field SQL Server
I have a field named job_date in a table in my database of the 8 SQL Server.
The data type is datetime.
Thus, the values for the fields as the 2013-03-11 15:55:52.000 look.
How to query this field to include only the values of a certain date?
For example
< cfquery name = "get_job_name" datasource = 'abc' >
SELECT FROM job_info job_date WHERE Job_name = March 12, 2013"
< / cfquery >
When I query the field now I get NO RECORDS.
This is because as the fields like this 15:55:52.000 2013-03-11. instead of this March 12, 2013"
How to access a certain date in the date and time field SQL Server when its formatting as this 15:55:52.000 2013-03-11. ?
where job_date > = TheDateYouWant
and job_date<>
In addition, the format is irrelevent. The only issue of date formats time is when you want to display.
-
My WMP said that I need to connect a burner and restart the player?
For long time now Ive been burning cd and just recently my WMP started getting a message saying I needed to connect a burner, and then restart the player. It goes the same for extraction, he said "A CD DRIVE IS NEEDED in order to RUN RIP". I don't know why he started to do this, he has never been a problem before. I have a laptop HP Pavilion with Vista Home Premium. Is there anything I can do to restore or solve my dilemma? Advice or answers would be useful.
Thank you
MikeHello
Step 1: Please make all underneath the same if you've done it before as it's often the total of the process which
solves the problem. Start at the top and use it as a checklist to the drive works and not jump around like a menu.Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.
Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
If necessary:
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
Playback of CD and DVD). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
that the troubleshooter does not, and those who "could" be the cause.Check with your system manufacturer Maker and device for possible firmware updates and the good
Your player registry entries.Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even registry settings correct for your CD/DVD drive
a person with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
Original title: identity crisis
I received a message saying that I need to open a session once a year under my certification number, or else it will be off. But you are forced to use a universal log in as an email. I HAVE beeen connected within a year with the help of my "universal" log. Help, please. I am a teacher of these programs and I don't want my certifications become inaccessible.
Hi Mary,
Thanks for keeping us posted and do us share this information.
I wish that you contact the respective support for assistance.
Check out the link-
http://www.Microsoft.com/learning/en/us/help.aspx#fBid=hlA7HLeeb9B
Back to us for any issues related to Windows in the future. We will be happy to help you.
-
issue in the creation of the IOM group reactivate via sql query.
Hi guys,.
I am trying to create a group to IOM database through sql query:
insert into ugp(ugp_key,ugp_name,ugp_create,ugp_update,ugp_createby,ugp_updateby,) values(786,'dbrole','09-jul-12','09-jul-12',1,1);
It is the inclusion of the group in the table of the PMU, but he does not appear in the administration console.
After that, I also tried with this query:
insert into gpp(ugp_key,gpp_ugp_key,gpp_write,gpp_delete,gpp_create,gpp_createby,gpp_update,gpp_updateby) values (786,1,1,1,'09-jul-12',1,'09-jul-12',1);
After I haven't tried with this query.but still no use.
and I also tried to assign a user to the group through query:
insert into usg(ugp_key,usr_key,usg_priority,usg_create,usg_update,usg_createby,usg_updateby) values (4,81,1,'09-jul-12','09-jul-12',1,1);
But always the same problem.it is the insertion in db.but do not enter in the administration console.
Thank you
Hanuman.Muriel Hanuman says:
Thanks guys.the above queries are successfully.just to work I rebooted the server.I certify here if we want to add the group to 10g through sql query, then insert the records in the tables 'PMU' and 'MPP '.
11 g, need to add records from the ugp only table. Because the administrator has also not found in this table only.so no need to table gpp.
Thank you
Hanuman.T1 groups are stored in the table of the PMU to IOM 11.1.1.5. The table of the GPP is present, but not used in 11.1.1.3 and is totally deleted schema repo in 11.1.1.5
2. as far as I know, there is no other vital records except that in UGP table objects are created for a group, you are, in theory, able to create groups with direct SQL. Using the API of the IOM is the preferred method.
3. you must use the sequence UGP_SEQ to get a new key for a group that you create.Vladimir
-
Creation of Adaptert DB to call the stored procedure in MS SQL server
Hello
I need to create a DB adapter to call a stored procedure in MS SQL Server.
I went through the MS SQL Server database connecting wire
He mentions that he must use a command line utility to generate the wsdl and xsd to call stored procedures in MS SQL server. Please indicate where this utility and how to use it.
All links to tutorials are welcome.
Thank you!!.
Silas.The key is SOA_HOME\j2ee\home\connectors\DbAdapter\DBAdapter.jar.
Make sure that the DBAdapter.jar is at this place
in my case, it is
e:\Oracle\product\soa\10.1.3\j2ee\home\connectors\DbAdapter\DBAdapter.jar
see you soon
James -
Unable to kenza link to download the Patch MS02-061 for SQL Server 2000
original title: can not download Patch MS02-061
Hello
I know this is an old patch but our new VPN software was listed as a patch that is required if SQL Server 2000 is installed. I get out the site and I am unable to download. Telling me that it can't find it when I click on the link:
http://support.Microsoft.com/default.aspx?scid=kb;en-us;316333&SD=Tech
It is on the page: http://www.microsoft.com/technet/security/bulletin/ms02-061.mspx
This is supposed to be the patch that replaces MS02-039.
Thank you!
RyanVisit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.
You will find appropriate support for SQL Server in this forum: http://social.msdn.microsoft.com/forums/en-US/sqlsetupandupgrade/threads
-
I get the guests to install this important update, but it will not be installed. I followed the instructions of troubleshooting for error 737D, but it does not work.
Any suggestions?Error code when you use Windows Update or Microsoft Update to install updates on a computer on which SQL Server 2005 installed: "0x737D."
http://support.Microsoft.com/kb/978597Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Cannot install the update of security for SQL Server SP3 (KB970892)
Whenever I try to install this pack I get the 737D error code
For this type of update, suggest that you post on this forum:
The SQL Server installation & set program at level
http://social.msdn.Microsoft.com/forums/en-us/sqlsetupandupgrade/threads/ TaurArian [MVP] 2005-2010 - Update Services -
Window of the query editor with Microsoft SQL Server Management Studio DO NOT scroll
In my view, that it is a question more of a Microsoft SQL Server Management Studio number... apologies if you think I might be in the wrong place of Windows...
When you work in Microsoft SQL Server Management Studio, my cursor is common in my part of the query editor window. When I try using my scroll wheel it to review some SQL code, instead the scroll on my mouse wheel is controlling the pane objects in the Solution Explorer window and NOT the glass query editor.Some of our partners appear to be well with their ability to scroll using the mouse scroll wheel while others seem to be in the same boat I am, and nobody here seems to know why it is.I hope for some comments and I am hopeful for an answer. Thanks in advance.PSULionRPHello
The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.
http://social.technet.Microsoft.com/forums/Gu-in/sqldatawarehousing/threads
Hope this information helps.
-
CF query fails in the CF, but works in SQL Server
I have the following cfquery which fails in CF and sql in the error code is exactly the same as those listed here and works very well when placed in sqlserver...
code will work when this section is deleted:
and t.EmployeeNumber in
(select std_user_id
of HED.dbo.EDD_CPR_EMP
where TERMINATION_DATE is null)
Why it does not work with above the code and how to make it work?
my code:
< html >
< head >
< title > retrieve data from database < /title >
< / head >< body >
<!-Game-> Datasource (s)
< cfset intellex_datasource = "In Intelex" >< CFQUERY NAME = "get_data" datasource = "#intellex_datasource #" >
Select distinct
c.CourseTypeName Type,
Substring (s.WorkGroupName, 1, 2) Dept,
t.EmployeeNumber Win2k,
t.FirstNam FirstName,
t.LastName LastName,
a.CourseName courses,
b.NextDate NextDate
trnTraining a, trnEmployeeTraining b, trnCourseType c, trnEmployeeWorkgroup r, trnWorkgroups s, sysEmployee t
where b.PriorityId = 'Y '.
and a.CourseId = b.CourseId
and a.CourseTypeId = c.CourseTypeId
and c.CourseTypeName = 'MS '.
and r.employeeID = b.employeeID
and r.employeeID = t.employeeID
and t.EmployeeNumber in
(select std_user_id
of HED.dbo.EDD_CPR_EMP
where TERMINATION_DATE is null)
and t.deleted is null
and r.workgroupID = s.workgroupid
and len (s.WorkGroupName) < = 2
and b.NextDate > = getdate()
order of t.LastName, t.EmployeeNumber, a.CourseName
;< / cfquery >
< h4 > used data based on criteria of form < / h4 >
< cfoutput query = "get_data" >#Get_data.type #, "Check it", #Get_data.win2k # < br >
< / cfoutput >
< / body >
< / html >CF_newtome wrote:
-Looks like CF is unable to manage a sql to access two different databases?
CF can do, but I guess that the credentials that you use in the CF data source where is the problem.
Connect to SQL Server in SQL Server Management Studio by using the same credentials used by the data source and test your query.
See you soon
Eddie
-
DB Link using the gateway to Oracle to SQL server 2005
Hi all
I am facing problems to configure the gateway for Oracle database to connect to SQL server, given below are details:
Machine has
----------------
OS = Windows server 2008 R2 64 bit
DB = Oracle 10.2.0.5 64-bit
content of C:\oracle\product\10.2.0\db_1\NETWORK\ADMIN\*tnsnames.ora*
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = WIN-G9TJ5GM2SAO)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
)
)
dg4msql =
(DESCRIPTION =
(ADDRESS =
(PROTOCOL = TCP)
(HOST = 10.1.87.119)
(PORT = 1521)
)
(CONNECT_DATA =
(SID = dg4msql))
(HS=OK))
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1))
)
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
)
)
Machine B
----------------
OS = Windows Server 2003 32-bit
DB = SQL Server 2005 32-bit
Gateway = Gateway Oracle 11 g 32 bit
Content of C:\product\11.2.0\tg_1\dg4msql\admin*\initdg4msql.ora*
HS_FDS_CONNECT_INFO = localhost:1433 / / SDÉS
HS_FDS_TRACE_LEVEL = OFF
HS_FDS_RECOVERY_ACCOUNT = RECOVERY
HS_FDS_RECOVERY_PWD = RECOVERY
Content of C:\product\11.2.0\tg_1\NETWORK\ADMIN\*listener.ora*
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = eZeePay-DB)(PORT = 1521))
(ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
)
)
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = dg4msql)
(ORACLE_HOME = C:\product\11.2.0\tg_1)
(PROGRAM = dg4msql)
)
)
ADR_BASE_LISTENER = C:\product\11.2.0\tg_1
On computer A, if I use TNSPING it gives below error
C:\users\administrator > tnsping dg4msql
AMT Ping Utility for 64-bit Windows: Version 10.2.0.5.0 - Production on 12-MAR-2
012 11:44:12
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Use settings files:
C:\oracle\product\10.2.0\db_1\network\admin\sqlnet.ora
AMT-03505: failed to resolve the name
Please please help what's not in configurations!
Best regards!
Irfan
Published by: irf_mas on March 12, 2012 12:47 AMHello Irfan,
As far as I can see the correct air configuration files, but you can check a few things-1. they may have been lost when posting in the forum, but can do you that there is a space at the beginning of each line in the tnsnames.ora and listener.ora except for the first line of each section-
ORCL =
dg4msql =
EXTPROC_CONNECTION_DATA =
LISTENER =
SID_LIST_LISTENER =
2. What is in the file sqlnet.ota on the computer has?
3. host 10.1.87.119 is the machine eZeePay-DB?
4 is the gateway listener began the eZeePay DB?
Kind regards
Mike
Maybe you are looking for
-
consider the iPhone 7 plus 2-3 weeks for shipping
Recently, I bought a new iPhone 7 and said I have to wait up to 3 weeks to be shipped. When I ordered, he said that I get it on 16, but because they have exhausted I now have to wait. Because I was so close to making the 16, I would put at the front
-
Service Finder on my MacBook Pro no longer displays my files AND I can't leave yet nor minimize the Finder. How can I solve this? Thank you!
-
Hello guys,. Two months ago I have my Toshiba Satellite T130 branch, but I have a serious problem. That it becomes slower and slower... Whenever I run a program (winamp, Skype, etc.) or even to open the control panel I have to wait for a long time an
-
How to allow customers using my laptop to access the internet?
as an administrator of this computer how to let guests have access to the internet by using the dial-up usb modem or wireless?
-
Connection of blackBerry Smartphones
My 9000 "BOLD" is not connected to the internet, and I have a data plan that activates the wifi featuresI can't log on my facebook, I can't ping! Can someone help me pls my plan data runs