Creation of the dynamic resource item

Similar Questions

• How to create the dynamic list item in the designer of Site Studio?

  Hi all
  I installed the Site Studio Designer(10gR4). The dynamic list item that I added in the region of contributor runs a query to search and display all the files in a particular folder. In Contributor mode when I try to add/edit the dynamic list item, it gives an error saying:
  Cannot perform the action for the following reasons:
  [+] Failed to retrieve search results. Failed to retrieve search results. Failed to create the result set of query ' SELECT IdcColl2.dID, dDocName, dDocTitle, dDocType, dRevisionID, dSecurityGroup, dDocAuthor, dDocAccount, dRevLabel, dFormat, dOriginalName, venture, dWebExtension, dInDate, dOutDate, dCreateDate, dPublishType, dRendition1, dRendition2, VaultFileSize, WebFileSize, URL, dFullTextFormat, dFullTextCharset, DocMeta.* FROM IdcColl2, DocMeta WHERE IdcColl2.dID = DocMeta.dID AND (((xCollectionID > = 14 ET xCollectionID < = 14) AND NOT ((CONTAINS (xDontShowInListsForWebsites, '{DIPP_Sample}") > 0))) ORDER BY dDocTitle desc".) ORA-20000: Oracle text error: 10599-DRG: column is not indexed
  
  I activated the full text on the content server search and also included xWebsites and xWebsiteObjectType columns to be fully indexed in the fields Configuration.Is area it any other setting to do? Help, please.
  
  Thank you
  Nithya

  Hello

  Include the xDontShowInListsForWebsites also of the area filed and then update it. Then test it.

  It may be useful
  Srinath

• dynamically create and destroy the custom menu item

  I have a standard TestStand platform that I use on multiple systems.  On some systems, I have a few sequences of calibration and I would like to have the Update menu to have the RunSequence of these sequences of calibration.  I know how to manually create these menu items, but they are no longer valid for some sequence files.  I would use the sequence SequenceFileLoad to dynamically create menu items and the SequenceFileUnload to destroy these menu items.

  I've played around with the API, but cannot determine the correct path to get to the create and destroy the custom menu items.  Does anyone know how this can be done?

  Thank you

  Matthew

  Yes, see the online help for the members of the following APIs:

  Engine.GetEditTimeToolMenuItems

  EditTimeMenuItems

  EditTimeMenuItem

  Basically, you get a collection of tool using Engine.GetEditTimeToolMenuItems () menu items and then call EditTimeMenuItems.Insert () or EditTimeMenuItems.Remove (). If you insert a you get returns an EditTimeMenuItem object on which you can change the settings.

  In addition, since it has an expression to hide items in menu tool, you need not necessarily to destroy, you can hide them instead.

  Hope this helps,

  -Doug

• Custom resource does not synchronize with equalize the dynamic Types

  Hi all

  Env: VCAC 6.2

  VCO: 5.5.2

  A custom resource is created based on the dynamic type in VCO. While some changes were made to DyanmicType - added a few attributes. When this custom resource is changed it shows no new attributes in the fields section. I have tried to remove/add endpoint external VCO, delete/recreate the resource custom, rebooted vcac device.

  Any help appreciated.

  Thank you

  tried to add a new DynamicType in VCO, hoping that this will force to refresh the cache. It seems that it worked. New fields are emerging.

• Is it possible to use the dynamic link twice? (from creation to AE)

  I made my edit in Premiere Pro (SC6). During my work I had to use the dynamic effects as a stabilizer of the chain link. Now, I'm finished with the work on the creation and would like to redo the calibration color effects. But now, when I import the entire Premiere Pro project in AE, all videos I have already related before, don't work/game more in AE. I also tried to use dynamic linking again rather than the import option. But it's the same problem.

  Is there a workflow to publish excerpts from the first sequence in after effects by dynamic links, and then when I got there also change the whole first sequence in After Effects?

  Maybe I should do in a sense the next time? What would you suggest to do in this case?

  Thank you

  Philippe

  You cannot create cyclic connections. The clips using DL already should be rendered correctly before being able to use the DL on the entire sequence.

  Mylenium

• Hi friends this is the code for the dynamic creation of user in plsql, but these statements are not run if pls help for this error

  DECLARE

  n NUMBER.

  BEGIN

  n: = 1;

  WHILE (n < = 10)

  LOOP

  CREATE a user EM | IDENTIFIED BY KLU n;

  SESSION CREATION GRANT, GRANT ANY PRIVILEGE TO EM. n;

  COMMIT;

  n: = n + 1;

  END LOOP;

  END;

  Hello

  Here is the dynamic creation of user query and giving grants to the user,.

  DECLARE

  n NUMBER.

  cr_user VARCHAR2 (300);

  gr_user VARCHAR2 (300);

  BEGIN

  n: = 1;

  While (n<=>

  LOOP

  cr_user: = 'CREATE user EM | n | "IDENTIFIED BY KLU";

  gr_user: = "GRANT CREATE SESSION, GRANT ANY PRIVILEGE to EM '. n | '';

  EXECUTE IMMEDIATE cr_user;

  EXECUTE IMMEDIATE gr_user;

  n: = n + 1;

  END LOOP;

  END;

  Edited: Removed when OTHER exceptions to Code.

  See you soon!

• Formula quick item on the dynamic database values

  Hello
  
  How to get the dynamic item database value of back-end.
  
  as % ANNUAL_PLAN_BALANCE_ASG_ITD
  
  % PROPORTIONATE_LEAVE_BALANCE_ASG_ITD
  
  Where the fast formula is to get values for the basic elements of these data.
  
  Concerning
  SAI sisi

  check the wire-
  Re: Problem of Balance

• Help with dynamic action and the selection list item

  G ' Day Apex gurus.
  
  I have problems trying to achieve to trigger the Help window from an element automatically select. A Help window is triggered when it is clicked on the label of an item, but my customer wants to be triguered automatically as soon as the user clicks to view the options in the select list.
  
  I think I should be able to do with dynamic actions but I can't function.
  
  I know when someone clicks on the label of the item selection list trigger this JavaScript
  
  JavaScript:popupFieldHelp('277938589795252851','1545903379570909')
  
  So I want to trigger the javascript also when the user click on the item selection list and pull down the options and for that I think that the dynamic action is the way to go, but I can't do things.
  
  That's what I have to do:
  
  I created a dynamic option as follows:
  
  Name: test
  Sequence: 30
  Even: click
  Selection type: product (s)
  Article (s): P1_RATING <-a selection list item
  Condtion: - no requirement.
  
  Real Actions
  Sequence: 10
  Action: Run the JavaScript Code
  Fires when the result of the event is: true
  Fire on loading the page: checked
  Code: javascript:popupFieldHelp('277938589795252851','1545903379570909')
  
  Thank you anyone who can tell me what I'm doing wrong here or bring a solution to my problem to trigger the Help window from an element automatically select.
  
  Kind regards
  Carlos

  Hi Carlos,

  I've set up a test case of exactly in the same way and it worked fine for me. I've created a page element called P1_DA_DEMO and added some values of the static selection list, then added a help text. I used the settings are lower, I suggest you try again, but also make sure that you have no other Javascript errors on the page. Use a tool like firebug to check.

  Name: Action Dynamics demo
  Sequence: 10
  Even: click
  Selection type: product (s)
  Product (s): P1_DA_DEMO<- a="" selection="" list="">
  Condtion: - no requirement.

  Real Actions
  Sequence: 10
  Action: Run the JavaScript Code
  Fires when the result of the event is: true
  Fire on loading the page: unchecked
  Code: javascript:popupFieldHelp('277938589795252851','1545903379570909')

  Scope of the event set a Bind s.

  Thank you

  Paul

• To access the page defined by a dynamic action item

  I have a page element that is defined by a dynamic action. However, if I try to access this page anywhere else on the page element, it is null. Y at - it a specific method to dynamically reference the value of page elements, other than the usual & p2_page_item. reference. TIA.

  Hello!

  Where do you reference point? In another DA, process page?

  & NOM_ELEMENT. the syntax is only for the static text and it will be avoided in SQL and PL/SQL. It will get only value when the page is loaded.

  If you are referencing the element DA or JS, you can get its value with the function $v (for example $v('ITEM_NAME'). If you reference the process item, you can get its value with the standard bind variables syntax (: nom_element) or with the function v (for example v('ITEM_NAME'). If this process is inside the dynamic action, value of the item must be saved before session state.

  BR,
  Marko

• Failed to retrieve the file. The dynamic application file is not in the specified location

  Hi all

  We face below mentioned question when creating content for our portal application web center.

  I configured UCM correctly for my portal application by creating the connection of content in my application resources repository.

  Our Center web version: 11.1.1.8

  1st edition)

  Content Server request failed

  Impossible to recover the file. The dynamic application file is not at the specified location ('/ l01/oracle/middleware/user_projects/domains/Webcntr_domain/ucm/cs/weblayout/resources/wcm/custom/sitestudio/contentwizard/webcenter/contentwizard.hcsp ').

  That's what I did

  In one of my portal page I added the content presenter by entering mode(ctrl+shift+e) contribution and in content configuration presenter window, when I clicked on the button "create Web content".

  It take me to my window to center of oracle and survey web content the above error. Here's the URL that I have in my browser

  http:// < hostname >: < portNumber > / CS/Resources/WCM/Custom/SiteStudio/contentwizard/WebCenter/contentwizard. HCSP

  Just to clarify, even I tried the same thing in the spaces of the web Center as well. I created a TestPortal, adding a page, and on this page when I add the content presenter and clicked on the "Create Web content" button, I get the same question.

  Please suggest me what could be the reason.

  Studio on the Site of 2nd edition) (11.1.1.8), I created all the required element definitions and definitions of the region and they are archived as well. And content of oracle web Center (UCM), I can learn all the definitions xml for these items. But if I want to change their definitions in the site studio, I do not get is it possible to see all the definitions element or definitions of region I created previously. is this kind of bug in 11.1.1.8? Since I was not facing this problem in 11.1.1.6.

  so can anyone suggest something for the issues mentioned above.

  Thank you

  Nassim

  Hello.

  WebCenterConfigure component of the Complutense University of MADRID is responsible for the creation of the contentwizard.hcsp in the folder you specified. Please check if it is enabled, or you will need to reset it.

  In any case no problem of migration, if WebCenterConfigure been activated before it doesn't have an impact, of the contentwizard.hcsp.

  Kind regards.

• Time of design and of the dynamically created controls

  I have a project written in VC6 as a project of the MFC dialog box. In a particular area, I dynamically create several (the exact number depends on user input) CNiGraphs. There is also a two CNiButtons that were created at design time using the resource editor. The problem I have is that when this dialog box is open, a message appears saying it is an eval version and the control will go off after 5 minutes. After 5 minutes of waiting, the CNiButtons 2 go inactive (black tower), but the continuous CNiGraphs of work. I have a valid license of MStudio 8.1.6, version but it seems that these 2 buttons do not recognize the license. There are also other buttons from the moment of conception of the project, but these have no problem at all. When you create the dynamic creation of the CNiGraphs, give them a valid license string, and I was wondering if there is a problem with the time created and dynamically controls created in the same dialog box to design. Anyone know?

  I don't remember, but I can have created these 2 CNiButtons when I was with only an eval license. (All others were undoubtedly create when I got a full license) Could have an impact on them? I have a vague memory of reading somewhere that DTC create controls to check the license when they are created in the designer and store that info in them license. If this is the case does anyone know an easy way to update the license stored in control? I rather not just delete it and Add again because I would avoid having to redo the tab order (unless someone knows how to easily insert something in the middle of the order of tab instead of having to click through all the controls in the correct order)?

  In addition, I don't know if this would affect anything, but the project was originally built with ComponentWorks 1.0, we were forced to move to MStudio when we met a few bugs in CW, so all controls were originally CW controls which have been converted into control of CNi. I doubt that this is so like everywhere else, we changed during controls is not a problem, but I'm ready to try the suggestions.

  Hi JC,.

  I hope you had a good weekend!  I'm glad to hear that you're back running.  Add the extra button was, in fact, causing update the licensing information for the other buttons, as you can imagine.  After further research, I found that the license information are stored only the form of the control, and if this control doesn't change in any way (or in your case, adding a new project), he sees no reason when compiling to recreate a link to the license.  However, after the change of control and a new, it updates the link between the license information, which solved this problem in your case.

  I hope this helps, JC.  Have a great day!

• Delete the custom resource

  Hi all

  I need to expose a DyanmicDataType created in VCO as a custom in the DSA data source and manage this custom data source. Let me know if I am doing this correct.

  1, resource to create custom in VCAC:

  * Define a new data type by calling 'Define the Type' in the folder DynamicTypes in vco.  The data type is < namespace >. < Objetpersonnalise >

  * Create new resource custom in the DSA based out of DynamicTypes:namespace:Objetpersonnalise

  To create a workflow VCO that returns an object of type Objetpersonnalise.  The workflow returns an object by calling DynamicTypesManager.makeObject

  
  

  2 delete the custom resource
  

  How to remove this custom resource that appears in the tab 'Elements '. I can create a new action of resource and associate it with a workflow VCO. How to remove this resource instance custom vaca in the workflow.

  Any help appreciated.

  Delete is performed via a resource of available Action you create.  A simple workflow that takes your resource type as input would.  (if your Item workflow is simple, you can actually use the same workflow to throw... really just an entrance and an exit of the type to get in and out of inventory in the items tab)

  This removes the element Custom inventory of resources (items tab)... If you really want to destroy the resource itself (from source), you might as the workflow to have also a task of the script to actually remove/destroy article in stock dynamic types.  (for example deleting a row in a database table)

  ... Pictures worth a thousand words...

  

  +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=

  

  +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=

  

  +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=

  

  +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=

  Hope that helps...

• Calculation of the dynamic roles membership

  Hi team,

  I set up a business role "Provision Active Directory" and associated Active "person in access to resources: provision Active Directory' with a valid configured condition." I am also attaching the dynamic role annex default ' default roles Appendix dynamic balance "I configured to run every 1 minute.

  My requirement is - when a new user is created in D1IM, belonging to dynamic roles must be evaluated immediately and the user should will be assigned the role of the company. However in my environment, I see what is happening only when I run the DBScheduler manually. I also set the parameter - QER\Structures\DynamicGroupCheck\CalculateImmediatelyPerson.

  Could someone tell me all the configurations that I might be missing?

  Thank you

  Priya

  Hi Priya,

  the meaning of the 'QER\Structures\DynamicGroupCheck\CalculateImmediatelyPerson' parm config is NOT a recalculation immediately BUT a immediately the creation of recalculation of the DBQueue task.

  Following the DBScheduler must operate and run this task.

  You cannot change this behavior.

  All you can do is to reduce the frequency of the DBScheduler.

  It will be started by a SQL Server Agent job and will run every five minutes (by default).

  You can reduce this time in the configuration of the SQL Server Agent job.

  Best regards

  Steffen

• Producer / consumer set loop of dynamic data item type

  Hey all,.

  I do a simple exercise of producer / consumer in a loop. In my loop of producer I audio Aqcuerir and in the loop of consumer I'm projecting on a chart

  Everything works as I had in mind, the only thing that bothers me is the way that I had to set the type of the element to the block "Get the tail" at the beginning.

  I knew no better way to get the kind of data that I used to just take an another "acquire its" Express VI and which hang. But that may not be the only way to get there, right?

  Note: I know that I might not need to use a producer / consumer design tend to do, but I need to get hold of technology for school work so I came with this exercise just to get a hang of it.

  Thanks in advance,

  Al.

  Al,

  You just need to feed the correct data type in this entry, which you did by getting the output of a second acquire its Express VI.

  You can also use the "Convert to Dynamic Data" function to do this.  When you drop to the bottom of the function, you will be asked to give the input type.  Tests I've done, it seems not to matter, but for example if you chose the entry to a single scalar type, you need to feed a digital constant (change to double type) in the entrance and use the output of dynamic data such as line item data.

  I don't like the dynamic data type because it is not very clear as to what it is.  Another thing you could do would be to use the "Convert from Dynamic Data" function to change the output of the VI of its acquisition to a different data type for more or less to avoid the original problem all together.

• Get FL.exe - Entry Point not found 'point of entry procedure for NtAlpcSendWaitReceivePort not found in the dynamic link library ntdll.dll' error at boot fruity loops.

  Original title: ntdll.dll error at boot fruity loops.

  get FL.exe - Entry Point not found 'point of entry procedure for NtAlpcSendWaitReceivePort not found in the dynamic link library ntdll.dll' error when I try to start fruity loops after installing Kies from samsung for the new phone. How can I fix this error? Help, please. Thanks in advance! :)

  Hello
  I suggest you contact support FL. I couldn't find all of the resources for this program.
  Eddie B.