Failed to retrieve the file. The dynamic application file is not in the specified location

Similar Questions

• Failed to retrieve the configuration of database file when installing EBS on 2 nodes

  I try to install EBS 12.1.1 on two different nodes on Redhat Linux 5. After properly installing the database on node1 (ebsdb), I started rapidwiz on node2 (ebsapps) to install the application technology. When I get to the screen where it asks "Do you want to create a new configuration or load a saved?", I chose to load a saved configuration, typied in the database connection information (ebsdb.sparkdb.com:PROD:1521) and get the following error. Anyone know what I am doing wrong? I am able to ssh to ebsdb to ebsapps and vice versa, and the database and listener is in place.
  
  Failed to retrieve the database configuration file.

  user564785 wrote:
  What file must be copied from DB node to the node of Apps and what place?

  conf_.txt - http://docs.oracle.com/cd/E18727_01/doc.121/e12842/T422699g54568.htm

  You can copy the file to any place on the application-level nodes.

  Thank you
  Hussein

• UCM - BPEL failed to retrieve the form of update process. Cannot run the service

  Hello
  
  
  I am trying to integrate the University Complutense of MADRID 10.1.3.3.3 with BPEL 10.1.3.5, I already installed the component of the UCM BPEL and updated the jar files in/custom/BpelIntegration/lib with the pot in BPEL.
  
  Also define the connection between UCM and BPEL
  
  the Configuration ID: Local
  Description: Local BPEL
  Domain: by default
  
  JNDI properties
  First factory of context: oracle.j2ee.rmi.RMIInitialContextFactory
  The provider URL: opmn:ormi://localhost:6105:oc4j_soa / orabpel
  Principal: oc4jadmin
  Identification of security information: *.
  
  When I test the connection it seems to be valid "JNDI parameters were validated successfully."
  
  but when I try to create a process with bpel configuration, the following ERROR Message appears:
  
  Content Server request failed
  Failed to retrieve the form of update process. Unable to run the 'getDeployedProcesses' of service method. (System error: runtime error: java.lang.IllegalStateException: can't replace cause)
  at java.lang.Throwable.initCause(Throwable.java:320)
  to bpelintegration. OracleIntegration.getAllProcesses (OracleIntegration.java:265)
  to bpelintegration. OracleIntegration.getBpelProcesses (OracleIntegration.java:184)
  to bpelintegration. OraBpelHandler.getDeployedProcesses (OraBpelHandler.java:224)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:585)
  at intradoc.common.IdcMethodHolder.invokeMethod(ClassHelperUtils.java:461)
  at intradoc.common.ClassHelperUtils.executeMethodReportStatus(ClassHelperUtils.java:142)
  at intradoc.server.ServiceHandler.executeAction(ServiceHandler.java:75)
  at intradoc.server.Service.doCodeEx(Service.java:488)
  at intradoc.server.Service.doCode(Service.java:470)
  at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1350)
  at intradoc.server.Service.doAction(Service.java:450)
  at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1191)
  at intradoc.server.Service.doActions(Service.java:445)
  at intradoc.server.ServiceRequestImplementor.executeActions(ServiceRequestImplementor.java:1111)
  at intradoc.server.Service.executeActions(Service.java:431)
  at intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:632)
  at intradoc.server.Service.doRequest(Service.java:1709)
  at intradoc.server.ServiceManager.processCommand(ServiceManager.java:357)
  at intradoc.server.IdcServerThread.run (IdcServerThread.java:195))
  + [Details] +.
  + Battery service for this request is - ORABPEL_PROCESS_UPDATE_FORM (* no captured values *) java.lang.IllegalStateException: can't replace cause to java.lang.Throwable.initCause(Throwable.java:320) to bpelintegration. OracleIntegration.getAllProcesses (OracleIntegration.java:265) to bpelintegration. OracleIntegration.getBpelProcesses (OracleIntegration.java:184) to bpelintegration. (OraBpelHandler.getDeployedProcesses(OraBpelHandler.java:224) at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at intradoc.common.IdcMethodHolder.invokeMethod(ClassHelperUtils.java:461) at intradoc.common.ClassHelperUtils.executeMethodReportStatus(ClassHelperUtils.java:142) at intradoc.server.ServiceHandler.executeAction(ServiceHandler.java:75) at intradoc.server.Service.doCodeEx(Service.java:488) at intradoc.server.Service.doCode(Service.java:470) at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1350) at intradoc.server.Service.doAction) Service.java:450) to intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1191) to intradoc.server.Service.doActions(Service.java:445) to intradoc.server.ServiceRequestImplementor.executeActions(ServiceRequestImplementor.java:1111) to intradoc.server.Service.executeActions(Service.java:431) to intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:632) to intradoc.server.Service.doRequest(Service.java:1709) to intradoc.server.ServiceManager.processCommand(ServiceManager.java:357) to intradoc.server.IdcServerThread.run(IdcServerThread.java:195) +.
  
  
  
  Can someone help me?
  
  Thanks in advance
  
  Carlos Pereira

  Hello

  Workaround for this problem is:

  Copy orabpel - thirdparty.jar/bpel/lib and place it in the folder/custom/BpelIntegration/lib , and add this variable in intradoc.cfg of the CS (stop the content server before performing this change):

  JAVA_CLASSPATH_bpel =/custom/BpelIntegration/lib/orabpel-thirdparty.jar

  Start content server after the steps above have been completed, and then test to see if the problem persists.

  Thank you
  Srinath

• Failed to retrieve the kernel symbols.

  Hello

  I was wondering if anyone else has had it before. For some unknown reason, my VM Win7x64 which I use very good for 2 or 3 years has stopped working. When I try to run it, it comes up with the following error messages; I have to click OK to go to the next message. I uninstalled VMWare and I have restored the virtual machine to start a VM work last week. None of them worked and now I need help.

  Failed to retrieve the kernel symbols.

  Could not initialize the surveillance apparatus.

  Internal error.

  VMWare Pro - 6.0.1 (1331545O

  Help, please

  Hi farbeyond,.

  Please see the post of karthikg2013 here: Re: my Virtual Machine unbootable molten

  See you soon,.

  --

  Darius

• Failed to retrieve the mappings for the server. Reason: null

  I get the following in the Console error when I add or update my server

  [oolocal], (07 / 14 at 04:40:11): server is available. Get the settings from the server to the server
  [oolocal], error, 07 / 14 at 04:40:12, impossible to fetch Server mappings. Reason: null
  [oolocal], error, 07 / 14 at 04:40:12, failed to get the logs directory. Reason: null

  Standalone CF8

  Webroot in c:\inetpub

  RDS works (so I can browse the datasource)

  Kind regards

  Aaron

  This problem is known. Failed to retrieve the mappings for the server. Reason: null. We fix it.

  Just to check the parameters are collected successfully from the server. Create the project and join the server to the same. CFM open and type must identify the data sources.

• Error running code system. Failed to retrieve the configuration information

  I get this error:
  
  Error running code system. Failed to retrieve the configuration information for the content Terminal item. Unable to load locale 'American English '.
  
  Details:
  
  An error has occurred. The stack trace below shows more information.
  
  ! csSystemCodeExecutionError! csUnableToGetConfigInfoForCheckIn! csLocaleNotFound, English-US
  intradoc.common.ServiceException:! csUnableToGetConfigInfoForCheckIn! csLocaleNotFound, English-US
  at intradoc.server.ServiceRequestImplementor.buildServiceException(ServiceRequestImplementor.java:1760)
  at intradoc.server.Service.buildServiceException(Service.java:1997)
  at intradoc.server.Service.createServiceExceptionEx(Service.java:1991)
  at intradoc.server.Service.createServiceException(Service.java:1986)
  at intradoc.server.ServiceHttpImplementor.determineParameterizedLocale(ServiceHttpImplementor.java:609)
  at intradoc.server.ServiceHttpImplementor.initLocale(ServiceHttpImplementor.java:408)
  at intradoc.server.Service.initLocale(Service.java:333)
  at intradoc.server.Service.initDelegatedObjects(Service.java:201)
  at intradoc.server.ServiceManager.processCommand(ServiceManager.java:358)
  at intradoc.server.IdcServerThread.run(IdcServerThread.java:197)
  
  Anebody has an idea
  
  
  Thank you
  REDA

  Hello

  Add the SystemLocale = American English variable in your config.cfg, restarting the CS and then see if the same problem persists.

  Srinath

• Failed to retrieve this file?

  Hello

  I have written some documents in InDesign CS4 over the weekend and exported inx file to work on it to work using CS3. Something I do quite often.

  When I opened and save it as a new document in CS3 and trying to change my text, I get an error message that says:

  "Failed to retrieve this file. It can be used by someone else. "

  It's crazy, because it it only my folder and is not on any network etc... etc... etc...

  We know what could cause this and how I can close it, so I can work on my file?

  Thank you!

  Babs

  Are you sure that you didn't export an .incx file or resources (history of InCopy CS3) by chance?

  Bob

• WMM edition error message - ' cannot publish to the specified location. Check the source files and the location is still available and that there is enough disk space. »

  I made a movie of 30 minutes or more in WMM, some of the videos that I imported I had to convert to wmv, to import into WMM. Once I went to publish the movie, after the publication of about 1%, an error message pops up saying something like "cannot publish to the specified location. Check the source files and the location is still available and that there is enough disk space. "I have 8 GB of free space on my hard drive and I tried to burn a cd on a dvd, and save to memory stick, none of them have worked, the same message is displayed even if they have sufficient space available. There is no red x in the videos or photos that I imported, so no files are missing. Some files have been moved when they were converted, but the movie plays well in WMM.  I want to export to is in my documents is therefore always available. I spent hours trying to figure this out and I I still don't know what the problem with it! Help! I've also spent a lot of time to their conversion to avi to see if this helped and the same message appeared again.

  What is the format of your source of debtor files and how did you convert
  TO WMV?

  I can only imagine that you are using Vista Movie Maker 6?

  It's not really about the location... error messages can be very cryptic...
  The error that you mentioned usually appears when the source files in the project
  are damaged or are not fully compatible with Movie Maker and made
  in a movie file cannot continue. In addition, large complex projects can cause
  in this issue.

  In some cases, it may be possible to record in DV - AVI, during registration as
  . WMV fails: the following article explains how to save... Publish it in film...
  6 machine and the graphic link shows where the option:

  Windows Vista - publish a movie in Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  The following chart shows where the DV - AVI option.
  http://www.Papajohn.org/IMGs/Vista-PublishToComputerChoices.jpg

  If the recording as long as DV - AVI fails... see the following articles:

  Movie Maker - problem resolution - "cannot record a movie.
  http://www.Papajohn.org/MovieMaker-issues-CantSaveMovie.html

  Windows Movie Maker error
  Cannot complete the Save Movie Wizard
  http://moviemakererror.blogspot.com/

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv
  Audio - wav, wma, wmv

  Sometimes, it can help if you are going to... Tools / Options / Compatibility tab...
  and uncheck all filters.

• The video file can be published to the specified location. Check that the publishing location is still available, that there is enough free space on the disk, and then republish the movie again.

  It happened once before, but it somehow went away after I restarted my laptop. I restarted my laptop, this time, but it has not worked.

  ~*~

  OK, so I just finished put a video together. It consists of a Hypercam 2 record (which means it's a .avi file), a PNG image, text and a song (which is a WMA file).

  ~*~

  I save the file, and then click Publish Movie. Everything goes well until the last step where the video is actually published. The window made a break for a while before you receive the following message;

  ~*~

  "Cannot complete the movie publish .

  The video file cannot be published to the specified location. "Check that the publishing location is still available, that there is enough free space on the disk and then republish the movie again."

  ~*~

  I know there are a lot of free space on the drive on my laptop (it's an Inspiron 1520), and that there is nothing wrong with any of my files. I tried to change places without result. It simply doesn't get it. It would be a great help to me if someone could tell me what is the problem :)

  ~*~

  Thank you very much

  Len

  Microsoft Windows Movie Maker is not to let me publish my movies

  Hello

  I suggest you try the steps mentioned in the link given below.

  Error message when you try to publish a movie using Windows Movie Maker in Windows Vista: "cannot complete publish movie.

  http://support.Microsoft.com/kb/930435

  Additional information:

  Solve problems with publishing a movie to your computer

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-publishing-a-movie-to-your-computer

• HP Envy5530: Save scan to the specified location

  Whenever I try to scan the printer says it is successful, but the computer says: application from HP could not save the file to the specified location.  I've never had this problem before because she was always going to My Documents folder.  Any help would be greatly appreciated thanks

  Hi @ljsbus2,

  Welcome to the HP Forums!

  I see that you are unable to save your scan with your HP Envy 5530 on Windows 7. I'm happy to help you in your analysis!

  Please try our HP print and Scan Doctorand let me know the results!

  Start us with that and go from there!

• I get the message "Windows Movie maker cannot save to the specified location".

  I get the message "Windows Movie maker cannot save to the specified location".  I tried different places, to moved all the files in these locations, recreated film, enhanced virtual memory to computers at 8 GB and 47GB available disk space. Tried all options to the title of best quality, Best Fit, other settings and including the CD recording. But it still won't save as a movie to a project. I have 5 separate voice recordings, and a video with music incorporated for a total of about 24 MB. Help?

  Hi Mare Hausen,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  3. What is the total size of the memory (RAM) installed on the computer?

  See the below Microsoft article and try the steps mentioned, check if it helps.

  Movie Maker 2 stops responding when you try to save a large movie file

  http://support.Microsoft.com/kb/814836

• Windows Movie Maker cannot publish the movie to the specified location

  From: patiotaiza

  Message: I have a 5-minute project and trying to publish it on my PC I get the following message:

  "Windows Movie Maker cannot publish the movie to the specified location. Verify that the original source files used in your movie are still available, that the publishing location is still available, that there is enough available disk space, and then try again. »

  I have enough space available in my PC (8 GB on the left), search for the missing files and they are all OK, tried several different locations, editing... and it still doesn't work. I'm sad, can someone help me please?

  Thank you!

  De : John Inzer

  You may have some incompatibility issues with your source files. Take a look at the following articles:

  Movie Maker 2 - problem solving - "cannot record a movie.

  http://tinyurl.com/yjvztz

  or

  http://www.Papajohn.org/mm2-issues-CantSaveMovie.html

  Type of file with Movie Maker compatibility

  http://tinyurl.com/v8tee

  or...

  http://www.myvideoproblems.com/tutorials/MovieMaker/File_type_compatibility.htm

  What file type should I use in Movie Maker?

  http://tinyurl.com/6n66g3

  or...

  http://www.myvideoproblems.com/tutorials/MovieMaker/WhichFileTypeInMovieMaker.htm

  John Inzer

  MS Digital Media MVP

  View

  This isn't a technical support

  I'm a volunteer

  Solutions that work for

  me I work for you

  Proceed at your own risk

  Another response of the community of Windows Vista discussion groups

• Movie Maker error: cannot save the movie to the specified location.

  When I wanted to save my movie on my computer, I received an error at 0%, it is said:

  "Windows Movie Maker cannot save the movie to the specified location. Verify that the original source files used in your movie are still available, that the backup location is still available, and that there is enough available disk space, and then try again. »

  There is nothing about it, I even 20 GB of free space, the video is only 1.24 MB. and files original source is always available.

  Someone HELP me please! I use Windows Vista Home Basic.

  original title: Windows Movie Maker 2.6 problems during the recording of movie files

  There are to many free converters that you can
  downloaded on the net, but for a few
  MP3 files... There are free converters online.

  The following site may be worth a try:

  Convert online
  http://www.online-convert.com/

  Open the drop window in the field of Audio Converter.

  Select... WMA

  In the next screen, left click on the Browse button and
  Navigate to the MP3 you want to convert

  Left, click Convert.

  When the file is converted will prompt you to
  download it.

• get error 0 x code 80300001 windows cannot install on the specified location

  try to install vista on a new hard drive on my computer laptop hp dv6810, but get the error code 0 x 80300001. Windows cannot install to the specified location.

  the installation program recognizes my hard drive, we'll format me and partition but will not be installed. im not that well informed about computers then be simple and detailed with your answer. Thank you.

  Hello

  (1) you are able to change the settings in the BIOS?

  Check the below link that can help you in the matter of fixing.

  http://support.Microsoft.com/kb/925481

  Also to ensure that material supports the installation of Windows Vista on your computer.

  Hope this information helps.

• Why am I suddenly the following error message: "the specified location is reserved by the operating system and is not allowed. Please choose another location. "I've been recording all night and I have not changed the settings.

  Why am I suddenly the following error message: "the specified location is reserved by the operating system and is not allowed. Please choose another location. "I've been recording all night and I have not changed the settings.

  toml12632875 wrote:

  I've been recording all night and I have not changed the settings.

  You have completed a disc to its ability, by chance?