Creator of recovery disc cannot create the 3rd disc
Make recovery disks, while program has been verified the final disc, program came with unresponsive and disc was wrong to let go. I don't want to lose a lot of DVD if it is a common fault. Someone else had this problem?
Possibly it of a problem of the DVD that you have used to create a recovery disk
What happen nothing unusual. I recommend that you test different DVD from different manufacturers
I had a good experience with R TDK discs
Tags: Toshiba
Similar Questions
-
Unable to create the 3rd recovery disk
Hello
I am
get an error when you try
to create the 3rd DVD+ R.when it check 2% who say the message "that we live."
Recovery media errors
creation. Please try again. »Pavilion dv6-6113tx
number-LZ765PA
Core i5 W7 home premium
pls help
SohagHello
Here's another suggestion that may help.
Start Notepad and let Windows load completely. Hold down the Windows key and press R. For the run box, type msconfig and press ENTER. In the System Configuration window, click the Startup tab, uncheck the box next to each startup item and then click on apply to apply the change. Restart the computer and see if you can now get 3 disc to burn and check - as I suggested earlier, if it creates all the other disks before starting the window System Configuration and re - allows objects of start - stop and try again.
Kind regards
DP - K
-
Original title: cannot create the Image of the system or system repair disc
I just bought a new Windows 7 computer. I tried to create a system repair disc, but still receive the error msg - error (0x80004005) unspecified. I tried - and lost - several DVDs in the process. Also, not able to create a System Image disc. The computer says that I have to format the drive and when I click OK, it goes through the movement, then gives me an error msg that the Format has failed. (In addition, it does me not the possibility not to format the drive.) Very frustrating...
Hi iamkira,
This problem can be caused by a conflict with other programs installed on your computer, usually antivirus software. Follow the steps described in this document to create the drive in a clean boot state.
Let us know if that helps.
-
Windows recovery system cannot read the recovery disk
I have Vista laptop computer model pavilion POS, when I bought it, I made a creation of recovery disks, but now when I put it in my PC to see contains I see an error that Sandra insert your disc and system cannot fix it and I also used microsoft fixed it Center but cannot fix it.
Hello
Here are all the HP information on different methods to recover back to factory settings
Three ways to recover the PC to original operating status
You have a choice of three ways to run a recovery and restore your computer to its original state. The recovery process may take an hour upwards or more and is not complete until the prompt to connect to the computer. When the recovery is complete, don't forget to run the update of Microsoft Windows and the HP health check to install all the drivers updated and software.Restore the PC to its original state with the HP Recovery Manager of in Windows VistaIf the PC can be started and opens on the Windows desktop, you can use the HP recovery disk to restore the PC to original factory State by following the steps below.- Click Start and enter the recovery in the field of research. Select Recovery Manager in the list, when it becomes available. Allow the action to proceed, if you are prompted. The HP Recovery Manager opens.Alternatively, click Start , all programs , Recovery Manager , and then Recovery Manager . Allow the action to proceed, if you are prompted. The HP Recovery Manager opens.
- Click Advanced options , System Recovery , and then click Next . The PC will restart and reopen the Recovery Manager.Alternatively, if the advanced options is disabled, click Next , and then System Recovery . The PC will restart.
- When the PC restarts, select the System Recovery option and click Next .
- If you are prompted to use the Microsoft System Restore , click No and then click Next .
- When you are prompted, select back up your files first (recommended) , and then click Next . Follow the on-screen instructions.
- When you are prompted to recover without backing up your files , please STOP before you click Next .
CAUTION: It's the last chance to change your mind recovery PC and delete all the files and programs. Once you click Next , the restore process cannot be stopped - If you are convinced that you want to start the recovery process, click Next . The PC immediately starts formatting the disk hard drive and destroy all data.
The recovery process may take up to several hours and will return the PC to its original state. All custom, settings drivers, software and upgrades or hardware updates are lost and must be reinstalled.Restore the PC to its original state with the HP Recovery Manager if Windows Vista is not accessible. Follow the instructions.If the PC does not start under Windows, it may still be possible to use the HP recovery disk to restore the computer to its original state. The Recovery Manager can be started during the boot process by following the steps below.- Press on the button / stop to start the PC and press the f11 key when the standard BIOS guests appear on the black screen.
NOTE: By pressing the f11 key at startup on a computer with an image factory HP will start the system recovery process, even if the message is not displayed. - If the HP Recovery Manager can access the hard disk recovery partition, a prompt to back up user files before you start the recovery
- If the HP Recovery Manager cannot access the hard disk to resolve system errors, you need to use the recovery disk custom that you created to recover the hard disk to its original state.
- If you have not created the custom recovery disk, or disks are damaged, you can order a replacement of HP recovery CD.
- When the Recovery Manager starts, follow the instructions of recovery step by step , shown above.
- Insert the recovery disc into the optical disc drive and start the computer.If the computer is running, insert the reinstallation disc and immediately click on Start and select restart to force the computer to boot from the recovery disc.
- When prompted, Press any key to boot from the CD or DVD, press any key on the keyboard.
- Leave the recovery disk boot and load the files required, while the Microsoft loading screen appears. It may take several minutes to load the required files.
- When the HP Recovery Manager window appears, click Advanced options , System Recovery , and then click Next to open the Recovery Manager.
- Follow the on-screen instructions and perform the necessary actions.
NOTE: Do not interrupt the recovery process even though the computer may restart, and the Windows desktop can display at different times. - When you are prompted, follow the on-screen instructions to backup user files.
- After completing the backup, when you are prompted, reinsert the recovery disk, and then click Next to continue the recovery process.A status box is displayed to indicate the State of the recovery and the estimated remaining time.
- If you have used several disks when you created the custom recovery discs, follow the prompts to remove the first disc and insert requested discs.
- When you are prompted to Insert additional driver disk , take one of the following actions:
- If you purchased a replacement of HP recovery disk and it included an extra driver disc, insert the disc, and then click OK or Next . The recovery program checks the additional drive and installs the necessary files.After you install the additional files, a prompt to remove extra disc and insert the original recovery disk.
- If you bought a replacement at HP recovery disc, and he didn't get an extra driver disk, click ignore or Cancel . The recovery program will ignore the request and install the following file on the recovery disk.
- If you have created a personal recovery disc, press Next to continue.
- Continue following the onscreen instructions to complete the recovery process.
-
DBCA cannot create the database in 12 c in Windows
Hello
After the installation of Oracle 12 c on R2 Windows Server 2012 and successfully running the netca command to configure the listener, I run with the DBCA tool question
It throws an error message of "Recovery Manager could not restore the data files"
I looked at the log files, here is some information:
Corrupt block 1 found during the backup piece, reading file=C:\ORACLE\PRODUCT\12.1\DBHOME_1\ASSISTANTS\DBCA\TEMPLATES\SEED_DATABASE. DFB, corr_type = 4
Review of blocknum = 1, file=C:\ORACLE\PRODUCT\12.1\DBHOME_1\ASSISTANTS\DBCA\TEMPLATES\SEED_DATABASE. DFB, found the same corrupted data
Not sure if this helps, but I am attaching several log files to help debug the problem.
I read the post DBCA cannot create the database in 12 c, but it doesn't quite have an answer.
Any help is appreciated.
Thank you
Pranav
Looks like a bad installation or a bad block on your disk. Have you tried creative using the "Custom Database" model in the wizard dbca (one that does not come with the data files)? It will take more time to create, but shouldn't read the dbca reported as corrupted file
-
ORA-19504: cannot create the file '+ DATA '.
Hello everyone.
This is the scenario:
We have a test server that is used to restore daily backups of the Production database. Restore us the database with the same SID as the production one.
For specific reasons, we need create a second database (with a different SID) on this server with an older backup from the production one. To realize that I'm trying to use a part of the "DUPLICATE without connection to the target" tutorials on the web.
I tried the simple guide that I found which is:
(1) copy the backup files cold /somedirectory
(2) start OLD database with nomount
(3) connect RMAN with OLDER as an auxiliary
(4) run the following: DUPLICATE DATABASE FOR OLD BACKUP LOCATION ' / somedirectory' NOFILENAMECHECK.
Here's the result (I deleted some lines because of the size of it):
----------------------
RMAN > ProdDB to OlderDB DUPLICATE DATABASE
2 > LOCATION of BACKUP "/ home/oracle/OlderBackupFiles.
3 > NOFILENAMECHECK.
4 >
From October 1, 14 Db double
content of Script memory:
{
clone of SQL 'alter system set control_files =
"+DATA/OlderDB/controlfile/current.829.859839217" comment =
' Set by RMAN "scope = spfile;
clone of SQL 'alter system set = db_name
"ProdDB" comment =
' Modified by RMAN duplicate "scope = spfile;
clone of SQL 'alter system set db_unique_name =
"OlderDB" comment =
' Modified by RMAN duplicate "scope = spfile;
clone to stop immediately;
Start clone force nomount
Restore controlfile primary clone of ' / home/oracle/OlderDB/controlfile_ProdDB_20141001_4159.bkp';
change the clone database mount;
}
execution of Script memory
SQL statement: alter system set control_files = comment "+DATA/OlderDB/controlfile/current.829.859839217" = "defined by RMAN" scope = spfile
SQL statement: change the system db_name set = comment "ProdDB" = "modified by RMAN duplicate" scope = spfile
SQL statement: alter system set db_unique_name = comment "OlderDB" = "modified by RMAN duplicate" scope = spfile
(...)
From restoration to 1 October 14
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID = 191 type device = DISK
channel ORA_AUX_DISK_1: restore the control file
channel ORA_AUX_DISK_1: restoration complete, duration: 00:00:03
output file name=+DATA/OlderDB/controlfile/current.829.859839217
Restoration finished in October 1, 14
mounted database
output channel: ORA_AUX_DISK_1
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID = 191 type device = DISK
content of Script memory:
{
until the SNA 274262921.
the value of newname for datafile clone 1 again;
the value of newname for datafile clone 2 again.
the value of newname for datafile clone 3 again.
the value of newname for datafile clone 4 new ones;
the value of newname for datafile clone 5 again.
the value of newname for datafile clone 6 again.
the value of newname for datafile clone 7 again.
restoration
database clone;
}
(...)
From restoration to 1 October 14
using the ORA_AUX_DISK_1 channel
channel ORA_AUX_DISK_1: from the restore backup set data file
channel ORA_AUX_DISK_1: specifying datafile (s) to restore from backup set
channel ORA_AUX_DISK_1: restore datafile 00001 to + DATA
channel ORA_AUX_DISK_1: restore datafile 00002 to + DATA
channel ORA_AUX_DISK_1: restore datafile 00003 to + DATA
channel ORA_AUX_DISK_1: restore datafile 00004 in + DATA
channel ORA_AUX_DISK_1: restore datafile 00005 to + DATA
channel ORA_AUX_DISK_1: restore datafile 00006 to + DATA
channel ORA_AUX_DISK_1: restore datafile 00007 to + DATA
channel ORA_AUX_DISK_1: reading from the backup /home/oracle/OlderDB/database_ProdDB_20141001_4157.bkp piece
channel ORA_AUX_DISK_1: ORA-19870: error when restoring the backup /home/oracle/OlderDB/database_ProdDB_20141001_4157.bkp piece
ORA-19504: cannot create the file '+ DATA '.
ORA-17502: ksfdcre:4 cannot create the file + DATA
ORA-15041: diskgroup space 'DATA' exhausted
switch to the previous backup
Oracle instance started
(...)
content of Script memory:
{
clone of SQL 'alter system set = db_name
"OlderDB" comment =
' Restore the original value by RMAN "scope = spfile;
clone of SQL 'alter system reset db_unique_name scope = spfile;
clone to stop immediately;
}
execution of Script memory
Errors in the script of the memory
RMAN-03015: an error has occurred in the script stored memory Script
RMAN-06136: the auxiliary database ORACLE error: ORA-01507: database not mounted
ORA-06512: at "SYS." "X$ DBMS_RCVMAN ', line 13466
ORA-06512: at line 1
RMAN-05556: not all data files have backups can be recovered on SNA 274262921
RMAN-03015: an error has occurred in the script stored memory Script
RMAN-06026: some targets not found - abandonment of restoration
RMAN-06023: no backup or copy of the file 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-03002: failure of the command duplicate Db at 15:39:11 01/10/2014
RMAN-05501: abandonment of duplicate target database
Complete recovery manager.
------------------------------------------------------------------
The first mistake of the stack was ORA-19504 while trying to restore the backup of the database.
First thing I took a glance was ASM occupation but it enough available space.
The second was a permission problem, but it doesn't seem to be the case because RMAN can correctly write the controlfile to ASM.
One have some advice on what I should look for?
Thanks in advance sorry for my English.
Select this option.
Hello.
Thanks, but is not the case. As I have said, that the DATA diskgroup has space enough he uses only a single disk in a RAID.
But I solved my problem... To the auxiliary database, I added the following to the spfile:
DB_FILE_NAME_CONVERT = '+ DATA/ProdDB', '+ DATA/OlderDB ".
LOG_FILE_NAME_CONVERT = '+ DATA/ProdDB', '+ DATA/OlderDB ".
I don't know why, but with these two clauses, it worked well. Perhaps RMAN was trying to restore it to the wrong place?
-
Hello world! I had two questions on a configuration current VSA that I'm doing for a client. Installation of urban contaminated sites brownfield version 5.1.1 = Live, running Virtual machines. Have everything configured, I'm facing 2 problems that may be a common issue throughout the community.
1. in the configuration of the cluster initial when you are ready to configure the drives of VSA, the wipeout disc around or just what has been configured space wise. My guess is he running virtual machines on the local data store that it will not write on this part but still format how much disk space has been used.
2. I received, during the vsa cluster configuration, the error message:
Cannot create the VSA cluster: Cluster 192.168.12.0 subnet is invalid. Must not be 192.168.12.0
Now, I saw the article on what it could probably be. The gateway appears and is correct. The problem is that I know that the default gateway is not the ping requests. I corrected it but have not begun installation because of the question #1 above. Since the gateway is now who responded, what would be the possible resolution. Thanks in advance to all those who support!
Hey Nate,
You're right about the behavior of the cluster wizard. It does not consume space and leave the space used by the existing virtual machines. Once that adjust you network settings (an adresse.0 may be the entry door?) You should be able to proceed with the creation of cluster.
IKE
-
ORA-19504 cannot create the file "+ FRA/test1".
Hi all
OPERATING SYSTEM:-RHEL5
DB version: GR 2-11
I'm trying to save a tablespace in the slot path mentioned using the script below
RMAN > backup tablespace users of devices type disk;
But what exactly is the error I get: -.
RMAN > backup tablespace users of devices type disk;
From backup 2014-01 - 09:12:37:44
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID = 23 type of device = DISK
channel ORA_DISK_1: starting full datafile from backup set
channel ORA_DISK_1: specifying datafile (s) in the backup set
Enter a number of file datafile = name=+DATA/orcl/datafile/users.259.836129771 00004
channel ORA_DISK_1: starting piece 1 at 2014-01 - 09:12:37:44
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-03009: failure of the backup command on the 09/01/2014 12:37:45 channel ORA_DISK_1
ORA-19504: could not create the file "+ FRA/test1".
ORA-17502: ksfdcre:4 cannot create the file + FRA/test1
ORA-15005: name "test1" is already used by an existing alias
Configure it order what I did is: -.
RMAN > CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT "+ FRA/test1";
and I create the destination required "+ FRA/test1".
Thanks in advance
How about using below
Set UP the FORMAT of DISC TYPE CHANNEL DEVICE "+ FRA/orcl/test1_t%t_s%s_p%p";
Concerning
Anurag
-
Cannot start db >; ORA-09925: cannot create the audit trail file
version 10.1.0.5.0
AIX 3 5 00C9CEA04C00 dcxnim01
When I'm trying to start db, getting this message any idea?
SQL > connect virtue sysdba;
ERROR:
ORA-09925: cannot create the audit trail file
IBM AIX RISC System/6000 error: 89: invalid file system control data detected
Additional information: 9925
ORA-09925: cannot create the audit trail file
IBM AIX RISC System/6000 error: 89: invalid file system control data detected
Additional information: 9925
Here's the tail of the log of alerts
3 Private_strands to the log command
Thread 1 Advanced for you connect to sequence 3923
Currently journal # 1, seq # 3923 mem # 0: /db01/oradata/ldapdcx1/ldapdcx1/redo01.log
Fri 6 Aug 16:48:34 2010
Errors in the /oracle/admin/ldapdcx1/bdump/ldapdcx1_j001_991348.trc file:
[ORA-07445: exception encountered: core dump [] [] [] [] []]
Fri 6 Aug 16:48:35 2010
Errors in the /oracle/admin/ldapdcx1/bdump/ldapdcx1_mmnl_508106.trc file:
[ORA-07445: exception encountered: core dump [] [] [] [] []]
Fri 6 Aug 16:48:38 2010
Errors in the /oracle/admin/ldapdcx1/bdump/ldapdcx1_ckpt_839714.trc file:
[ORA-07445: exception encountered: core dump [] [] [] [] []]
ORA-27072: IO file error
IBM AIX RISC System/6000 error: 5: i/o error
Additional information: 9
Additional information: 3
Fri 6 Aug 16:48:38 2010
Errors in the /oracle/admin/ldapdcx1/bdump/ldapdcx1_lgwr_905470.trc file:
[ORA-07445: exception encountered: core dump [] [] [] [] []]
ORA-27063: number of bytes read or written is incorrect
IBM AIX RISC System/6000 error: 5: i/o error
Additional information:-1
Additional information: 1024
Fri 6 Aug 16:49:07 2010
Errors in the /oracle/admin/ldapdcx1/bdump/ldapdcx1_pmon_848078.trc file:
ORA-00470: LGWR process ended with the errorIBM AIX RISC System/6000 error: 5: i/o error
Additional information:-1Problem of the OS.
What is the problem at the level of the BONE with the disc?unpacking of tail - 100
-
Satellite C55-A-1JL - 10 Windows sound driver - cannot create the instance of the APO
Hello.
I have Toshiba Satellite C55 - A (PSCGAE).
Yesterday, I've updated my Windows 8.1 to Windows 10 and install the drivers.
Version 1.2.41.0 of his Studio of DTS (32/64 bit).
When I try to open this application I have error: cannot create the instance APO.
What should I do?
You need to update the audio driver (I guess that your device uses IDT HD audio card)
But double check in Device Manager, then expand the section audio controllers, video and game to find out what kind of sound card you have.DTS Studio seems to be already aware...
So I advise you to go to the Device Manager and uninstall its drivers Associates
After reboot new, Windows 10 must check updates automatically... in case that it does not happen, you can try to manually start the update of the Device Manager. -
says device cannot create the folder
have been on a cruise and tried to use their computer to download some photos but wouldn't work - now my camera says * cannot create the folder *-my computer can't see also photos even though my computer says there is only 3 GB of space left on a 16 GB of my camera card is an EOS 60 d - my card a San disk Ultra 30 Mb 10 16 GB
It seems that the SD card is damaged. But it might be possible to recover the files. There are a lot of tips online on how to do it. You could start here... http://www.PCAdvisor.co.UK/how-to/storage/3481659/how-get-files-off-corrupt-SD-card/
Good luck, I know how much vacation photos can mean.
-
Cannot create the folder on the storage device
My flash player works well, but lately, I can't create a folder: it simply indicates: cannot create the folder?
My flash player works well, but lately, I can't create a folder: it simply indicates: cannot create the folder?
=====================================
The dialog box you received usually indicates that there
are too many files copied to the root directory of the
flash drive.The solution is to remove one or more pictures and
create new empty folders in their place... then move
all the photos in the files... problem solved. -
KB2628259 doesn't install, cannot create the directory or file. Anyone know of a solution?
Hi dakota25,
· Did you do changes on the computer before the show?
· You are able to install other updates successfully?
· You get the error message?
Follow these methods.
Method 1: Temporarily disable the security software.
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.
Method 2: Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.
After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.
(a) click Start, run.
(b) type msconfigand click OK.
(c) the System Configuration Utility dialog box appears.
(d) click the general tab, click Normal startup - load all services and device drivers and then click OK.
(e) when you are prompted, click on restart to restart the computer.
Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.
http://www.Microsoft.com/downloads/en/default.aspx
Method 4: Follow the steps in the article.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
You cannot install some programs or updates
-
I recently had a problem with the virus 'Restore Windows'. I was able to get rid of it with Malwarebytes antivirus scanner, but when I turn on my computer I get this error message.Cannot create the folder C:\Documents and Settings\ of Settings\Marlon\Local Application BVRP Software\NetWaiting\MoHlog.txt
I'm no expert, but I feel that my C drive disappeared, or at least has been hidden. My documents, pictures and music files are all empty. My programs (start > all programs) have been removed and deleted the shortcuts on the desktop. When I go to my computer, my personal and shared document files are not accessible. Under the description it says that they are hidden. My local disk (c) is also empty, but there is still very little space which suggests that programs and files have not been deleted.Is it possible to recover my files?Thank youHello
MoHlog.txt file is related to the software of modem on the computer, you can uninstall and reinsta it check if it works.
Also scan your computer for any infection by virus still present on the computer using any scanner online.
You can also try the system restore to the point before that the computer has been infected by the virus and check if it helps.
Good luck!
-
Original title: Device Manager empty
I have Windows XP Service Pack 3 installed in a Bootcamp partition on my Intel iMac. I can detect and install new hardware such as USB keys. However, the Device Manager window is blank - how can I get the window to display the devices connected to the computer? I am also unable to install Parallels tools when I use Bootcamp as a virtual machine. The error message "cannot create the 'root-enumerated device' necessary to install Parallels Paravirualization driver.
Hey Harcjk,
For your first question, go through this article.
None of the items appear in the device list manager when you open
http://support.Microsoft.com/kb/311504For the second question, here are some suggestions:
Method 1: Uninstall & install Parallels tools
NOTE: we highly recommend you make a backup of the virtual machine before you continue.
a. start your virtual machine and cancel the installation of Parallels Tools Wizard.
b. Click Start--> Panel--> Add / Remove programs and remove the Parallels tools in the list of applications.
c. restart Windows.
d. install the Parallels tools by clicking on the Virtual Machine--> install the Parallels Tools.
Method 2: Uninstall antivirus software
If the problem persists, try the following:
Temporarily uninstall all the antivirus software to the virtual machine and repeat steps of the "Uninstall & install Parallels Tools" section above.
Note: Don't forget to install the back antivirus software, once the problem is resolved.
Method 3: Uninstall, clean & install Parallels tools
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.
How to back up and restore the registry in Windows XP
http://support.Microsoft.com/kb/322756
a. If the problem persists, try the following:
b. start Windows.
c. go to "Start" > "Control Panel" > "Add/Remove Programs" and uninstall theParallels Tools if it is present.
d. go to 'my computer' > 'C' drive > "Program Files" > "Parallels" folder and delete the "Parallels Tools" folder, if present.
e. click the Windows 'Start' menu-> 'run' and type 'regedit'. Click OK.
f. in the registry editor, go to "My Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Parallels" and delete the heading "Parallels Tools" and go to "My Computer\HKEY_CURRENT_USER\SOFTWARE\Parallels" and remove the 'Tools' section.
g. restart Windows.
h. now install Parallels tools in the 'VM' menu on the Parallels Desktop menu bar, while Windows is running.
I hope this helps.
Kind regards
Shinmila H - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think.
NOTE: | Run the recovery process by using the custom recovery disk you created can take less than an hour, while you use replacement discs ordered directly from HP can take four to six hours and includes several reboots. |
NOTE: | If you have not created a personal recovery disk or the recovery disk will fail or corrupt, see HP - order recovery discs for Windows 7, Vista or XP laptops for more information. |
Maybe you are looking for
-
Sonic Recordnow do not installed on F10 - cannot find CD-ROM
HelloI have a F10 and according to the user manual, 'Sonic Recordnow' must be installed or included on a CD-ROM.I am familiar with Recordnow because it is also a HP desktop computer I own and is useful for backups of data on DVD. I searched for 'Soni
-
If I block AND delete the history of MY cat, the person I blocked, always see our history of cats when they use their Skype?
-
Why the 4g LTE 40 Strip is not supported in Acer z630s
In India only 40 gang's all here and I can't use 4 GB, pls do something!
-
Just today my wireless worked perfectly no problems at all. And then I'll be back from College 4 hours later and it seems not to work more, I called cisco and they want to charge me to fix it, and I don't have the money for it. I tried reseting the r
-
When I connected the printer to the system recognizes it as a cd player. I tried to install the driver (from the HP site), but it stopped at about 83% with General error msg. UAC is disabled and .net framework advanced fetures is not installed. I see