Unable to create the 3rd recovery disk

Similar Questions

• Cannot create the emanagement recovery disks

  Hello, I have an acer aspire one d255 I want to reset to factory default. I never did an installation of a recovery particion before this thought I'd better create discs of backup just in case.

  I have found the directions to create the disks, but whenever I select 'create disc factory default "I get the following message.

  "

  Configuration of the hard drive is not set by default. Abandoned backup.

  The only hardware change I did via the MMC disk management, I declined the c drive and made a particion of data storage.

  What is causing me to not be able to make the discs?

  more importantly, I'm likely to encounter a problem to make the recovery disk reset, if she can't create discs?

  If you don't have all the data your new partition created yet, simply expand the disk partition hard back to the State of origin and create more complex recovery disks.

  Hope that helps, good luck

• After chaning password on the computer, power failure and it is impossible to create the password recovery disk

  I put a password in a computer and a power failure the stop before I could create a floppy or Flash-back to the top.  Any solutions would be appreciated.

  The computer is running on Vista Home

  Hello

  If you know your password but vista does not read the information below

  http://support.Microsoft.com/kb/940765

  If the front is not the case read this:

  I'm sorry, but the strategy of microsoft in these forums is that without assistance will be given about lost or forgotten passwords

  read the policy at the link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/a5839e41-b80e-48c9-9d46-414bc8a8d9d4

• Re: Is it possible to create the current configuration of the software recovery disk?

  I recently bought A350. Next to the standard software provided by Toshiba, I bought and installed other products such as Norton Internet Security, update all drivers, etc..
  Is it possible to create a recovery disc on my current setup of the software?

  I know the recovery disk, but it will only restore the original configuration of the software. I don't want to go through all the pain of installing other products and update all the drivers.

  I have been using other software like Acronis Disk recovery, but I don't know this recovery cd created by these third party software can be used.

  Everyone has known about this?

  Hello!

  Boyfriend sorry but it is not possible to create a recovery disc with the current configuration of your software. The Toshiba Recovery disk contains the factory settings and t, you can integrate additional software to the image.

  If you want a picture of your laptop with your special software, you need to use another program like Acronis image. So you can make an image of your HARD drive with all your settings and software.

  Good bye

• I am unable to boot into windows vista 32-bit, so I downloaded the vista recovery disk and get an oxo error code what it means?

  Windows recovery disc 32-bit error code meaning version question

  Hello
  I hope someone can help me. I am unable to boot into windows vista 32-bit, so I downloaded the vista recovery disk and get an oxo error code what it means (thanks in advance)?

  You don't give any info on what was the original problem with the computer.

  You have set the Bios Setup to boot from the CD/DVD drive?

  At startup, it will say press F2 or delete key to go into Bios/Setup, or maybe F12 to go to the Start Menu.

  And have you tried also to tap F8 at startup and choose Safe Mode from the list of Boot Options?

  Use up arrow key to do this, press on enter.

  Browse your Hard Drive manufacturer's website, download software from here and test your hard drive for errors.

  See you soon.

  Mick Murphy - Microsoft partner

• I can create a system recovery disk that gets installed and updated Windows 7, not the preinstalled HP Vista recovery Partition?

  I have a laptop HP HDX 18 that had 64-bit Windows Vista installed, with a Vista recovery on his C drive Partition.  Since then, I installed clean 64-bit Windows 7 Professional of his Microsoft licensed DVD, that I still have.  I kept with all (200 +) of Windows updates.

  Now, I want to create a system (Flash drive) for this laptop recovery disk, but my concern is that he will lead the recovery in its Partition Vista original, installed at the factory.   If I use W7 administration tools installed to create a system recovery disc, it will recover the old Windows Vista or Windows 7?  In addition, it would be nice to have a system recovery disk that had the latest W7.

  I'm not looking to install the drive link below; However, I prefer the system recovery disk to restore my laptop to its W7 system most recently updated, rather than start over.

  http://Windows.Microsoft.com/en-us/Windows/installing-reinstalling-Windows#1TC=Windows-7

  What choices do I have?  Where can I find the appropriate instructions?

  Thank you very much for your help!

  If you are the same person, you use 2 different profiles, not the same profile.

  Sunspirit and jhughey are 2 different profiles.

• Unable to create the virtual disk: fault. RestrictedVersion.summary

  Hello

  Im trying to create a virtual disk using the CLI on ESX4i.  The script is:

  vmkfstools.pl - Server 10.190.2.51 - c 20 g d eagerzeroedthick - a free /vmfs/volumes/Internal/test.vmdk

  When the script runs I get error: unable to create the virtual disk: fault. RestrictedVersion.summary

  Can someone tell me why please.  Im trying to create a disk of 20 GB with adapter free with eagerzeroedthick on my internal called storage, (no subdirectory).

  The file system is THAT VMFS 3.33 maximum file size is 256 GB.  The block size is 1 MB.  If it is the block size that is the problem how can I easily change?

  It's in a laboratory, not a production environment.  I need the flag eagerzeroedthick like Im trying to create a passive active cluster node MSCS 2 on a single physical node with 2 machines VMS.

  Thank you.

  Mike.

  If you use the free version of ESXi (U4 and later versions), access to tools like the VIMA API are read-only.

  -Matt

  VCP, vExpert, Unix Geek

• Satellite L350: How can I create my own recovery disk

  How can I produce my own system recovery disk?
  Windows system keeps asking for a disk system that I don't

  Any advise?

  Hello

  I put t know what you mean exactly?
  You can create a clean Toshiba Recovery disk using the Toshiba recovery disc creator software.
  Its preinstalled on your laptop and after the creation of the recovery disk you can use for installing the OS.

  The Toshiba Recovery disk will NOT request a floppy disk!

• The system recovery disk - how do without floppy drive?

  I am trying to create a "system recovery disk" as part of the TOSSHIBA ASSIST (protect and fix the section).

  However, before we proceed, I noted that he was invited to a 'floppy' create a recovery disc but this model without this facility data can be recorded on a CD. I didn't get throughout the procedure and find that I couldn't finish it due to no floppy drive!

  Or otherwise just use the product recovery DVD - Rom supplied with the laptop in case of problem... not sure if this would hold the same data?

  Any help is appreciated!

  Hello Christine

  If you look carefully on this print option (shortcut) it is written to create the CD drivers & tools and in aria info nothing follow description allows to create an external symbol to the top of the caisse de dépôt drivers & tools.

  You use this shortcut, you can simply create Tools & Utilities CD and not the system recovery media. I did a few times without any problem. Equip your optical drive for CD - R, click on this shortcut, click the button BURN.

  All that s!

• I purchasedUnable to create the ASR recovery diskette after backup

  I bought an external hard drive to use as a backup of the system. The backup was successful, but in the end, I couldn't create the ASR restore disk. Is it possible to create one now?

  Hello

  You must have the floppy drive to create (ASR, Automated System Recovery).

  Visit the links which has information about how to Set up and use automated system recovery in Windows XP: http://technet.microsoft.com/en-us/library/bb456980.aspx

  How to recreate a lack automated system recovery diskette in Windows XP: http://support.microsoft.com/kb/299526

• How to create a password recovery disk?

  I'm not abe to log my vaio oon and the guest is to use the password recovery disk.

  I do not, I am able to create one online using another computer? Of is not where I can buy one?

  Audrey

  I'm sorry, but that must be done before you have forgotten your password.

  And you do not create it on a different computer.

  http://Windows.Microsoft.com/en-AU/Windows-Vista/create-a-password-reset-disk

  Above is the info on how to do the next time.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  You need to reinstall Vista, that we cannot help you with lost or forgotten password here...

  http://support.Microsoft.com/default.aspx/KB/189126

  "Microsoft's strategy concerning lost or forgotten passwords"

  Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd

  Read theBANNING of cracking of passwords information tools information provided in these forums in the thread above posted byBill fill MSFT, moderator

  See you soon.

  Mick Murphy - Microsoft partner

• recovery disk will not load error message pc not supported by the system recovery disk.

  had a virus that has taken possession of my PC and wanted the money order to the for free, so I install the recovery disk and chosen in advance and restored the pc at the time, he removed the hold and the system worked very well for a few days. then the system kept to self-extinguish. tried loanding the recovery disc and gave me the message pc not supported by the recovery disc, and now when start received bios award phoenix instead of the hp logo.

  attempted to run antivirus software but before he could finish short scan the pc shuts off I tried in safe mode and the same situation. I downloaded several antivirus programs, but it would still be closed the pc. I tried to install the recovery disk, and it gave me an error message pc not supported by the system recovery disk. now when I start up instead of the blue screen with HP logo, I get a bios award phoenix and other information that I can't copy down it goes too fast. Since I couldn't get rid of the virus, he took to a pc using store, they have removed the virus and loading of operating system vista, problem is I had the word and excel. Now, I can not get my desktop to factory oem computer. I really need my word that I have all my passwords for the accounts listed, I saved them to analyze the drive, but now I have not any other readers like drive j. Any suggestion on how to solve the problem, so I can load the recovery disc.

  Thank you very much

  Frenchquarter, welcome to the forum.

  I suggest that you download and install OpenOffice.  It is FREE and is open to all documents created in MS Office.  If it doesn't, at least it costs you nothing to try.

  I used OpenOffice for years.  Believe me when I say that he will do everything that will make MS Office and in some cases, the better.  At least, you will have to use in the future and you'll be amazed to see how they can do it for FREE.

  Please click on "BRAVO", if I helped you and click on "Accept as Solution" If your problem is resolved.

• EliteBook 850 G2: SimplePass absent of the software recovery disk

  Hello

  First of all, I don't know if I post the question in the right place, and I apologize if I'm not.

  I bought the laptop with windows 7 and received two CDs with it, one for install windows 10 and the other to re - install the software that came with the computer.

  I used a program before moving on to Windows 10 * that has been activated with my finger, saved my passwords, and I was able to connect to my windows with the fingerprint account.

  After the upgrade to windows 10 and install all of the software contained in the software recovery disk, I can't find this program.

  This software should come in the recovery disk? Why is it missing? How can I get that again?

  * which I'm not 100% sure it was SimplePass

  @hpatricia

  Your enterprise class system uses a software Client Security (not SimplePass).

  Page of the site system Web pilot:

  Laptop HP EliteBook 850 G2

  The Synaptics (fingerprint driver) driver is in the category

  Driver - keyboard, mouse and input devices (5)

  Download Driver Synaptics and information Page:

  Synaptics WBF fingerprint driver

  

  The security software is in the category

  Software - security (1)

  Client Security download and information Page:

  HP Client Security Manager

  

  Load / install the fingerprint Synaptics first driver >

  Restart and sign

  Windows key > settings > accounts > Sign-in Options >

  Assign an identification number (Security Windows requires to enable the fingerprint reader) >

  Activate the connection of fingerprints

  Once the Windows PIN / fingerprint is activated, load and install the Client Security program >

  Restart and sign

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  Fixed / responded? Click this post accept as Solution to help others find answers.

• Re: Satellite L300 - 1 5 - where to get the Toshiba Recovery disk?

  I had Windows reinstalled on my laptop after having a problem with the BIOS (result of having windows and ubuntu on the same machine! But I know want to do a recovery disc that I forgot to do this before. I downloaded the creator of recovery disk but that you no longer have the recovery partition because they were erased when windows has been reinstalled.

  Any ideas on what it is better to do?

  Thanks :)

  That's what you had to do it when you bought your laptop. Now, you can get because it is no longer available on your laptop. Ubuntu installation wiped you.
  Now, you can:

  1 the order [Recovery disk | https://backupmedia.toshiba.eu/landing.aspx] Toshiba for the money
  2 get windows copy the installation disc. All the drivers, you can find on the [European Toshiba driver Page | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp]

• Satellite Pro L20 - I can identify the right recovery disk?

  Hi all

  I wonder if there is a way to identify what recovery CD or DVD came with a particular laptop model?

  I have a number of Toshiba laptops and it is that recently that I started to write a note that's CD/DVD with a machine.
  for example
  GMR400788EN0 goes with Satellite Pro A200 PSAE4E-03U017EN

  I'm trying to figure out which CD is going with a Satellite Pro L20, PSL25E-00800CEN

  Thank you
  Ian

  Hello

  Sorry, but I think that there is no way to identify which CD belongs to what laptop.
  If your laptop comes with the recovery disk it should be a CD label or so on it.

  Anyway, it shouldn't be a problem, and you should test if it s the right recovery disk.
  Or you have so many Toshiba laptops? ;)