Similar Questions

• Error when trying to publish Panel to the web using Web publishing tools.

  

  

  As you can see in the photo.

  I want to now pubsihing my program on the web. So I using web publishing tools to create.

  But when he wants to download the panel, it cannot run, after that, the web out "VI required is not loaded in memory on the server".

  This sentence, 'Required VI is not loaded in memory on the server,' which way?

  Thank you for your help.

  Did you have a look at the following article:

  Asked that VI is not loaded in memory on the server computer

  A VI is deemed be in memory whenever the program is available on the server machine. The VI doesn't have to be running.

  If the article link above does not help, I would like to know what LabVIEW system you run on your system, and how many connections have what install you on the server. The LabVIEW basic and full development systems include a remote front panel license that allows a client connection. The LabVIEW Professional development system includes a remote façade license that allows five customer connections. I was wondering if that might cause problems.

• Error trying to update the model XML using XML Publisher administrator

  Hello people,

  We are on R12.1.3

  I changed a condition in a report and you try to download the new model XML using XML Publisher administrator.

  When I click the button to apply, it is throwing an error "bad request".

  Navigation: XML Publisher Admin > data definitions > query report

  Click on the report name > click 'Update file', in addition to the data model > choose file > click Apply

  I get the below error

  Bad request

  Your browser has requested that this server could not understand.

  
  

  Now, I could not download a new model of XML.

  
  

  I'm doing something wrong.

  
  

  Kind regards

  Kris
  

  user10163762 wrote:

  Thanks Eugen and Hussein.

  The problem is not with the template.

  It seems to be a problem in this particular case.

  Transferred to another instance.

  However once I run the program, I can't display the output as flashes and disappears from the window of the browser.

  My colleague says, it's to do with the trusted site to download something from the browser.

  Can you please guide me on how to solve this problem?

  http://bit.LY/1k8e2vi

  Thank you

  Hussein

• Print a document that has been transferred to a Web site using InDesign, "published online".

  I try to print a document uploaded to a Web site using InDesign "publish online. Because it's in spreads, it starts the left side of the print of the extreme-right page, leaving a strip of 5 "on the left. Someone at - it a quick way (it's the zero lock) solution? In addition, the only way to print is by right clicking in the margin - is there a more elegant solution?

  In the next version of InDesign (premiere at MAX and due at the end of the year) publishes online will be greatly improved. Publishers can leave readers to download a PDF file that can be printed.

• I'm trying to publish my site using the Publish drop and the FTP host option.

  I'm trying to publish my site using the Publish drop and the FTP host option. I enter the details requested and all it gives me, it is an error message of "could not sign you [suite failed to read].» Check your user name and password'. I'm the host my site on One.com. There is no place for me to choose the 20 port (although it should use anyway) and I have spent hours on the design of Web sites and do not want to go to waste. I use a trial version but Adobe say he has all the features of the paid version, which, at this rate, I will not get! I've updated the app 12 days ago. Csomeone help?

  As the error says it's a problem with the user name and password. If your host requires that you use port 20 just add: 20 at the end of your address of the remote host.

  For example: yourRemoteHost.com:20

• Generating PDF editable using XML Publisher

  Hello

  I'm trying to generate an editable pdf form of R12 using XML Publisher.  I am able to generate my PDF and load some data to it, but whenever I generate the PDF, it turns out all of my read-only form fields.  I tried to create the xdo.cfg file and place it in $XDO_TOP/resource by using the code below.

  <config version="1.0.0" xmlns="http://xmlns.oracle.com/oxp/config/">
      <!-- Properties -->
      <properties>
          <property name="all-fields-readonly-asis">true</property>
      </properties>
  </config>
  

  After that, I had my rebound DBA simultaneous server manager, but it did not work.  I don't know that if there is something else miss me.  Any help would be appreciated.

  Thanks in advance.

  Daniel

  So, I realized what my problem was.    For some reason any my xdo.cfg file in $XDO_TOP/resource has not been read. Now, I tried putting in $OA_JRE_TOP/lib and it worked.  Thanks for your help.

  Daniel

• A software update is required to use Digital Publishing Suite

  Hi when I get my folio Builder he says "a software update is required to use Digital Publishing Suite. "Please consult the Help menu and select updates to get the necessary software", but nothing happened! What should I do?

  Try to click on a link on this page to manually install the update of the DPS tools:

  http://helpx.Adobe.com/Digital-Publishing-Suite/help/installing-digital-publishing-tools.h tml

• DC motor of control using the analog output of DAQ 6008

  Hello

  Since the 6008 DAQ implements not good PWM, can I control the speed of the DC motor using outputs analog, protected by amplifiers?

  This will damage my DAQ?

  Ok.  The engines will be quite low.

  Consider using an LM317 as the "amplifier". Add one or two diodes protection. Connect the AO to the terminal of the regulator with a resistance setting to land.  Your output voltage can go down to 1.25 V and up to minutes (battery-2 V, Vaomax-1,25 V). If you have a battery of 12 V and a 12 V, the maximum speed of the motor engine will be slightly lower than the nominal speed full. The minimum voltage the motor probably will not work.  The regulator has a built in protection against overcurrent and overheating.  It's the motor controller cheaper you can do and works very well.

  If you need to reverse the engines, things get complicated a bit more.  You can use a DPDT relay or a transistor H-bridge.

  Lynn

• GET the file of cRIO using WebDAV - error (363510)

  Hi all

  Hoping for a little help with an error I can't cross. I am trying to get a file off my cRIO and onto my PC using the webDAV Protocol. I know there are other ways to do this, but really, Ide like to this way of working. I am sure that this is not a problem with my path of the file. The error says "Error writing to the socket" which makes me think maybe Windows prevents LabView to write the file on my local computer? I tried using the HTTPS protocol on port 443 so with the same result. One thing I am suspicious of is that I am connected directly to my cRIO on my secondary ethernet card and windows it is considering a "public network". I can't change that, but I have disabled the windows firewall, thinking that perhaps that had something to do with it.

  Thank you

  Corey

  

  I got it to work. Turns out that "local file path" needs the full path, including the name of the file that will be written. This is in contradiction with the help file for the VI GET of WebDAV. The help file says that simply give the path of the directory that is written to the file.

  Corye

• Module AO trigger using PFI on the cDAQ-9188

  I use a cDAQ-9188 chassis with an AO (NOR-9264) module.  Is it possible to configure a PFI (channel on the frame) as an input signal to synchronize an AO channel with the trigger?  Here's what I'm trying to do.  I need a channel on the AO module to switch voltages in sync with the trigger when the user "push a button".  So once the button is pressed, the channel of the AO will not change until the next trigger pulse.

  Thanks for your help

  Ben

  Hello Ben

  I hope you are well.  The consensus is that it is possible.  Have you tried this yet?  If so, can you tell me what you have tried and how you made a lot of progress?  I recommend the following VI example: Cont Gen tension Wfm - Ext Clk.vi.  Are you able to get all the functionality you are looking for this VI.  It was recommended that I'm showing you this.  We find this VI under help--> find examples and then material input output &--> DAQmx-->--> voltage analog generation.

  Please let me know how you are progressing and if you have need of all aspects of this example explained.  Thanks for choosing National instruments!

  Sincerely,

  Greg S.

• How to use HX85BA sensors with NI DAQ system?

  Hello

  I'm trying to connect two sensors of Omega HX85BA moisture to my NI DAQ system. The sensors detect moisture, barometric pressure, and temperature, using three 0 to 10 VDC positive outputs @ 10 mA or less, with a common thread of output. I have a SCXI-1000 chassis with two modules SCXI-1100 cards, 1102 b and a single 1102. Map of 1102 uses a block to connect SCXI-1303, while the other three cards use some 1300 years. The system will mainly use thermocouples for temperature measurements, but there will be other types of sensors, such as the two HX85BAs.

  The manual of the product for the HX85BAs is not very clear on how to connect the sensor to the system. Terminal blocks each have 32 channels with the positive and the negative screw terminals, it doesn't connect three positive sensor outputs to individual channels, with the municipality of output connected to each channel? It will work installation with SCXI cards I have, or I will have to purchase different cards? The system will be expanded to include at least 4 cards in a separate chassis SCXI 1000 more, is not a problem for the purchase of different components to adapt to the HX85BAs.

  Thanks in advance!

  Hi BBalmforth,

  You can connect the sensor to the SCXI-1100 1300 TB. Connect the positive output of CH + and CH - CHSGND. Common output wire must be connected to GND.

• acquire and graph of a voltage using LABVIEW 8.6 and DAQ 6020

  I recently installed Labview 8.6 on XP based computer and my device is 6020 DAQ. I installed the driver 7.4.4 to my DAQ 6020.

  This is my first attempt to write a labview on this configuration code, and my request is very simple.

  I want to measure a voltage at the analog input channel "Ach0" and this chart. The voltage must be sampled all 1millisec.

  I used a code that I found on google image search to do this, but I had got stuck at the point where I have to select channels using the DAQ assistant. The wizard DAQ says "no device supported found.

  In MAX, however my 6020 DAQ is present as device 1 and I can view tensions properly he is using "ach0" data acquisition channel 6020.

  The code is attached below. I use 'the edification of a voltmeter' to the page 11 of the attached pdf file.

  I searched the archives of this discussion forum, there is a code for graph 2 tension, unfortunately I couldn't find the code for my application. So I am writing from scratch.

  Please help me get the strings recognized by the DAQ assistant.

  Concerning

  Poli

  According to another post of yours, that you have really a DAQPad 6020 and it's an important distinction. If you had the pci version, I think you could install DAQmx and use the DAQ Assistant. As you said, you can use the traditional pilot and in fact it is what you have installed. The pdf file you fixed clearly mention using DAQmx so information on the functions of data acquisition are not related.

  I don't know if traditional DAQ examples still install, but if they are not, you will need to watch features on IO action > Data Acquisition > analog input palette. A good one is to start by HAVE acquire the waveform. A chart of output waveform and put everything inside a while loop wire.

• -Error 500 internal server when you use BI Publisher in OBIEE 11 g

  Hello!

  When you access a report created in Plubliser BI using LDAP users, you get the error message:

  Error 500 - Internal server error

  They know tell me if I need to configure anything on the Administration > Manager of BI Publisher?

  Thank you!

  Carina Mendes.

  Hi Felipe,.

  We have solved the problem,

  We had DefaultAuthenticator users and LDAP equal, it's contradictory authentication on BI Publisher.

  We have solved the duplicity of eliminndo of the problem and make a guide of refreshment.

  Thanks for the support!

  Carina Mendes.

• Create barcodes in 2d (Datamatrix) using BI Publisher in oracle Apps 11.5.10.2

  Hello

  Thank you for taking the time to read this post.

  We try to create 2D (datamatrix) barcodes in BIPublisher report. We are on Oracle 11.5.10 applications and BI publisher is 10.3.4.1

  Follow the instructions on the links following but still unable to generate bar codes in the output.

  https://blogs.Oracle.com/XmlPublisher/entry/2d_barcodes_cracked

  https://blogs.Oracle.com/XmlPublisher/entry/advanced_barcode_support

  A few questions before asking the real problem I am facing:

  1 oracle have built-in support for the creation of codes datamatrix 2D barcode in BI Publisher (in an application environment)? Or do we have to pay third party (such as IDAutomation) software for encoder classes?

  2. is there a built-in support for generating 2D barcodes in Oracle reports in an environment of 11.5.10 applications?

  Thank you.

  Kind regards

  Vincent

  You will need to use the Desktop Publisher tool to create the model for use in an application environment. Only the Desktop Publisher versions listed in the Doc of MOS are compatible with EBS - other versions can cause issues like that appeal to you.

• Need help how to group information using bi publisher of learning.

  I'm new to bi publisher and I'm lost.  I want to have a group and display the program once type at the top of this group.
  So, I want to display each role information that correspond to this group located below.

  My program_type group of the top poster and curls.
  The rest of the prints some information, but not with the appropriate group.    I have my sql, I got my information and sorted but I do not group the information into my sql.

  I don't know if that should happen in my sql before I exported the information in xml format.

  I'd appreciate any help or tutorial that will lead me in the right direction.

  MY MARKUP

  <? for-each-group: ROWSET1_ROW; / PROGRAM_TYPE? > <? type: PROGRAM_TYPE? > <? PROGRAM_TYPE? >
  <? for-each: ROWSET1_ROW? > <? PROGRAM_CODE? >
  <? Program name? >
  <? PROGRAM_DESCRIPTION? >
  <? FINANCIAL_PROG_NAME? > <? end foreach? >
  <? the end for the Group? >

  How IT DISPLAYS

  
  Theatre
  TV
  Activity |  ACTD |
  code |             |
  03. SHOW | Good Times |  TEST1
  03. SHOW | Jeffersons |   TEST1
  04. MOVIE | Transformers |   TEST1
  04. MOVIE | SpiderMan |   TEST1
  04. MOVIE | The planet of the apes | TEST1

  MY XML

  
  <? XML version = "1.0" encoding = "UTF-8"? >
  < DATA >
  < ROWSET1 >
  < ROWSET1_ROW >
  < PROGRAM_CODE > 03 < / PROGRAM_CODE >
  See THE < PROGRAM_DESCRIPTION > < / PROGRAM_DESCRIPTION >
  the good times < program name > < / program name >
  TV < PROGRAM_TYPE > < / PROGRAM_TYPE >
  Test1 < FINANCIAL_PROG_NAME > < / FINANCIAL_PROG_NAME >
  < EFFECTIVE_START_DATE > 10/01/2000 < / EFFECTIVE_START_DATE >
  < EFFECTIVE_END_DATE > < / EFFECTIVE_END_DATE >
  < / ROWSET1_ROW >
  < ROWSET1_ROW >
  < PROGRAM_CODE > 03 < / PROGRAM_CODE >
  See THE < PROGRAM_DESCRIPTION > < / PROGRAM_DESCRIPTION >
  < Program name > Jeffesons < / program name >
  TV < PROGRAM_TYPE > < / PROGRAM_TYPE >
  Test1 < FINANCIAL_PROG_NAME > < / FINANCIAL_PROG_NAME >
  < EFFECTIVE_START_DATE > 10/01/2000 < / EFFECTIVE_START_DATE >
  < EFFECTIVE_END_DATE > < / EFFECTIVE_END_DATE >
  < / ROWSET1_ROW >
  < ROWSET1_ROW >
  < PROGRAM_CODE > 04 < / PROGRAM_CODE >
  FILM of < PROGRAM_DESCRIPTION > < / PROGRAM_DESCRIPTION >
  Processors of < program name > < / program name >
  Theatre of < PROGRAM_TYPE > < / PROGRAM_TYPE >
  Test1 < FINANCIAL_PROG_NAME > < / FINANCIAL_PROG_NAME >
  < EFFECTIVE_START_DATE > 10/01/2000 < / EFFECTIVE_START_DATE >
  < EFFECTIVE_END_DATE > < / EFFECTIVE_END_DATE >
  < / ROWSET1_ROW >
  < ROWSET1_ROW >
  < PROGRAM_CODE > 04 < / PROGRAM_CODE >
  FILM of < PROGRAM_DESCRIPTION > < / PROGRAM_DESCRIPTION >
  SpiderMan < program name > < / program name >
  Theatre of < PROGRAM_TYPE > < / PROGRAM_TYPE >
  Test1 < FINANCIAL_PROG_NAME > < / FINANCIAL_PROG_NAME >
  < EFFECTIVE_START_DATE > 10/01/2000 < / EFFECTIVE_START_DATE >
  < EFFECTIVE_END_DATE > < / EFFECTIVE_END_DATE >
  < / ROWSET1_ROW >
  < ROWSET1_ROW >
  < PROGRAM_CODE > 04 < / PROGRAM_CODE >
  FILM of < PROGRAM_DESCRIPTION > < / PROGRAM_DESCRIPTION >
  planet of the apes < program name > < / program name >
  Theatre of < PROGRAM_TYPE > < / PROGRAM_TYPE >
  Test1 < FINANCIAL_PROG_NAME > < / FINANCIAL_PROG_NAME >
  < EFFECTIVE_START_DATE > 10/01/2000 < / EFFECTIVE_START_DATE >
  < EFFECTIVE_END_DATE > < / EFFECTIVE_END_DATE >
  < / ROWSET1_ROW >
  < / ROWSET1 >
  < / DATA >

  Howard

  Found the answer in the next post

  How you group themes

  answer:

  Yes, you can achieve this by using the data model. Read the 5.6.2 XML Editor User Guide (Chapter 9) for more details.

  Link to the document

  http://www.Oracle.com/technetwork/middleware/bi-Publisher/documentation/xmlpenterprise562userguide-130839.PDF

  sample

  
  

  
  
  
  
  

  Thank you