CS and the extension manager extensions

Similar Questions

• After update to 5.0.15 server, can not activate the OD service and the Profile Manager

  Hi, I have recently updated my Server 5.0.15 under El capitan 10.11.3.

  After that, Service OD and the Profile Manager can be activated server GUI.

  Of course, all users on my network are missing from the list of users; just local users remain.

  Reason: cannot be connected to the node 127.0.0.1

  How can I recreate an OD without use of app server?

  Thank you.

  P. S.

  Of course, even in the local server translates users preferences pane not connected.

  Many Open Directory problems can be solved by taking the following measures. Please test after each of them that you have not already taken it and back up the data before making any changes.

  1. the OD captain must have a static IP address on the local network, not a dynamic address. It must not be connected to the same network with more than one interface; for example, Ethernet and Wi - Fi.

  2. you must have a working DNS serviceand the host name of the server must match the FQDN name. To confirm, select the server by its name in the sidebar of the window of the server application, and then select the Preview tab click the button change on the host name line. The access that your sheet of server, the domain name must be selected. Change the host name, if necessary. The server must have at least three levels (for example, "server.yourdomain.com") name, and the name must not be in the top-level ".local" domain, which is reserved for Hello.

  3. the main DNS server used by the server must be itself, unless you use another internal DNS server. The only DNS server on the clients should be internal, they should get from the DHCP server, as appropriate.

  4. If you have accounts with basic network directories, make sure that the URLS are correct in the user settings. A return status of 45 from the demon authorizationhost in the newspaper may mean that the URL for the installation directory was not being updated after a change in the host name or the file sharing protocol (AFP, SMB, or vice versa.) If the server and the clients run all OS X 10.10 or later, directories should be shared using SMB instead of AFP.

  5. follow these instructions to recreate the Kerberos configuration on the server.

  6. If you use authenticated connection, check the validity of the certificate of the master. The common name must match the host name and domain name. Unselection and then reselect the certificate in.app was reported to have an effect in some cases. Otherwise, delete all certificates and create new ones.

  In the case of a self-signed certificate, create a trust profile in the Profile Manager and deploy it to the customers. On the server, you may need to create the folder

  /etc/openldap/certs

  and place a copy of the certificate of the server, for example:

  /etc/openldap/certs/server-name

  Also add a directive to the file

  /etc/openldap/ldap.conf

  of the form

  TLS_CACERT /etc/openldap/certs/server-name

  7 remove the link, then to connect customers in the preferences users and groups window. Use the FQDN of the master name.

  8 restart the master and clients.

  9. do not connect you to the server with the account of the user of a network.

  10 turn off the internal firewall in use, including third-party "security" software

  11. If you have created replica servers, remove them.

  12. If OD has recently stopped working while it was working before, you can be able to restore automatic backup in/var/db/backups, or a snapshot of the time of this backup Machine.

  13. If there is slapd errors in the log, try the following steps.

  Disable the Open Directory in the server application.

  Enter in a shell:

  cd /var/db/openldap

  sudo -s

  db_recover -c -h authdata

  db_recover -c -h openldap-data

  Turn on Open Directory.

  14 reset database password strategy:

  sudo pwpolicy -clearaccountpolicies

  15. as a last resort, export all users od. In the Open Directory of the server pane, delete the OD server. In some cases, you may need to use the shell to remove the server. Then recreate it and import the users. Make sure that the UID is in the range 1001 +.

• DVD RW drive disappears from the computer and the Device Manager on Windows 7 ultimate 32 bit

  After upgrading Vista to Windows 7, my DVD RW drive will disappear from official view and computing device and a scan for changes on the material or use of the player will not solve. Resolves a reboot of the PC (HP - Sony DVD RW desktop computer).
  It appears in the BIOS and when the first install Windows 7 found and the device manager reported everything is ok. It seems that after a power management feature has occurred and the PC wake up the disc is missing and the only way to return it is a restart.
  Help, please

  Thanks for the info, I had seen it work elsewhere on the net for similar problems with Vista, but not of joy as the either the upper or lower part reg entries appear under this subkey. They do it for the disk subkey but no CDROM

  Hibernation is disabled and I use power management to High Performance with only a screen sleep as a default 20 mintes and the hard drive after an hour of sleep. I upped since the two of them to see if that helps.

• Hi everyone, Q: no matter what I do I install Muse in English, and the cloud Manager downloaded in Dutch, other programs are installed in English but Muse, reasonable please help.

  Hi everyone, Q: no matter what I do I install Muse in English, and the cloud Manager downloaded in Dutch, other programs are installed in English but Muse, reasonable please help.

  You can change the interface language user in Muse by throwing Muse and no .muse file opened, go to preferences and select the new language. Then quit and restart Muse for the language change to take full effect.

• Shop for fonts and the extensions Manager WHY is it so difficult?

  I am trying to install the add-on from the shop to the police. I can not yet do a smart search in the 'Adobe modules'... search can't find the FontShop module even if I type the term a few obvious ways.   YOUR RESEARCH NEEDS SPELL CHECK AND FIND * CLOSING MATCHES. There are SO MANY problems of usability in this forum and in the modules Adobe Adobe it's ridiculous. Basic stuff - usability 101.

  But I can directly download the add-on from FonstShop... But it will not install in my Photoshop CC 2015. The problem is 'Adobe Extensions Manager' will not appear Photoshop CC 2015 even if I installed it (via could Creative).

  How do you get the extensions Manager recognize Photoshop CC 2015?

  The short answer, as Stephanie, is that you don't have. It is obsolete. Check out these resources: Adobe Exchange, specifically this one: Adobe Exchange

• Adobe CS6 package and the extension manager

  I managed to create a package for Adobe CS6 using AAMEE 3.1 on Mac OS X 10.7.5,, but the package will not be installed in silent mode. Adobe Extension Manager opens at the end of the installation. I tried to jump the 6.0.4 update of Extension Manager, leaving 6.0.0.412. Which fixed a bunch of errors that appear in the extensions Manager, but I can't understand how to prevent it from launching altogether. It nevertheless opens to a EULA that must be accepted and then displays an error that says "the extension 'Adobe Flash Professional Toolkit for CreateJS' does not contain a valid signature. The extension will not be installed. "I found this article with an update of the box tool for CreateJS that is supposed to fix the problem, but I can't understand how to include in a package created with JEAN.

  http://helpx.Adobe.com/Flash/KB/error-installing-Toolkit-createjs-11.html

  Thank you!

  -Jorge

  Hello

  A new update for this problem has been posted on http://www.adobe.com/support/flash/downloads.html. You must download this update and manually add when you create a package by using JOHN. There is a button "Add manually" on JOHN updates screen. You who add this update manually and create a package. Please follow this post on the forum - http://forums.adobe.com/message/4790883#4790883. There are more details in this regard.

  Thank you

  Rajindra kokola | Adobe Systems | [email protected]

• In the Add-ons Manager, the "Get Add-ons" button makes me nothing else than a "loading" legend that lasts forever. and the "Extensions" button makes me a white screen;

  In addition to the foregoing, the aspect button gives the message "Default is incompatible with Firefox 23.0." I only have one flaw: 21.0. NoScript representative insists on the fact that this problem has nothing to do with Noscript. This leaves only Firefox. Specifically, [email protected] indicates "NoScript has nothing to do with these symptoms, which fit in better with a corrupted profile.
  Please ask for assistance at http://support.mozilla.org.

  You should see the default theme 23.0 listed under appearance.

  As a test, you can try adding a Persona (light theme) temporarily to see if it shows.

  • https://addons.Mozilla.org/Firefox/themes/

  Quote: "default value is incompatible with Firefox 23.0." I only have one flaw: 21,0.

  This seems to indicate that you have Firefox 23.0, but for some reason some will still have a previous version of Firefox 21 files.
  
  So it is possible that something has gone wrong with a recent update and you have files that do not have updated correctly or the extension registry is damaged.

  The first can be fixed by a clean reinstall, and the second by deleting files (extensions.sqlite, extensions.ini) extensions.* and compatibility.ini in the Firefox profile folder.

  • https://support.Mozilla.org/KB/profiles

  If you see disabled extensions or is not compatible in ' Firefox/tools > Modules > Extensions ' and then click the Tools button, on the side of the left end of the search bar to check if there is an update available compatibility.

• wireless adapter is gone and the extension display not working after hibernation

  my laptop is a thinkpad X201s, os is windows 7, 32 bit, ultimate, English

  I used wireless home and my laptop is discharged, it is put into hibernation automatically

  the next day, I went to the office, plug power adapter and turn on the computer

  then I found wireless does not work, so I opened 'Control network and Internet\Network connections', there is no wireless icon. then I open "Device Manager", there is no wireless network adapter in network adapters

  and another bad thing is when I extend my screen with another monitor, the second screen shows nothing and the monitor does not work, it does not work in another computer, it seems necessary to fix. but it works before

  and I change a new monitor to connect my laptop display of the extension does not work, but the monitor can work in another computer, that's fine.

  and I restarted computer, no help.

  Finally I found the solution for wireless, first computer shutdown and plug-out the power adapter (it is very important), wait 30 seconds, then plug power adapter and restart the computer, wireless, great work

  now, the extension display function still does not work. I guess that the display extension PIN does not work, maybe need repaired

  Hi Jacky,.

  First of all we apologise for the late reply,
   
  As seems to be problems with the extension display port, I suggest you to contact the manufacturer of the computer.
  http://support.Lenovo.com/en_IN/feedback/contactsupport.page
   
  Please come back incase of any queries.
  Thank you
  Jayant.

• Security for the family and the Task Manager

  I installed on all my computers, parental control, for all users, and it is configured to block all adult sites.  It works perfectly, but there is a fault.  A person can go into the Task Manager and end the process and access the internet without the security of the family running.  Is there a way to stop the possibility of terminating the process in the Task Manager?
  Help, please?

  Hi Lisa,

  We have simulated the issue on our end. Standard accounts can use the Task Manager to end the control client parental (fsui.exe), but if he or she tries to put end to the the service process control parental (fsssvc.exe), it will be refused. This would avoid the child's account to get around the parental control service.
  If you want to disable the tasks for the standard account manager, you can post on the forum of Windows. Please note that the Task Manager is useful for standard accounts such as terminate tasks for programs no longer responds.
  Thank you!

• Administration server and the servers managed (WebLogic Server).

  Hello

  What are Server Administration and managed servers , I saw these words as I read the installation guide for WebLogic server,

  but I don't know what they are?

  
  

  I saw them while I was reading on the Node manager that allows me to start the above mentioned.

  
  

  -J' installs the WebLogic to develop applications with oracle reports and forms services.

  
  

  1 - do I need a node Manager, Administration Server or managed servers?

  
  

  2. is the Manager nodes, Server Administration or servers managed as EnterPrise data control manager ?

  
  

  Thank you very much

  Answers to most of your questions WLS lie in WLS documentation:

  http://docs.Oracle.com/CD/E23943_01/Web.1111/e13752/TOC.htm

  However, a simple answer to your questions could be summed up as follows.

  If you are familiar with older versions of application server version 10, which include OC4J as its Java container, as a managed WLS server is basically the same thing.  In the context of WLS, a managed server is responsible for hosting java applications on the server side.  For example, Oracle Forms Servlet.  The WLS management server is actually a java application deployed on a managed server.  So, really, the "Admin" server is a kind of "Managed Server".  In a typical installation of forms/States, you will find that at least three 3 managed servers are created automatically for you:

  • Server Admin
  • WLS_FORMS
  • WLS_REPORTS

  Node Manager is a separate process that is used to allow the two directors of the WLS environment such as command line allowing the administrator of the server to communicate with other servers managed, local or remote.

  http://docs.Oracle.com/CD/E25178_01/Web.1111/e13740/overview.htm

  Then, for simply "run" apply (forms, for example), all you need is the managed server that hosts the forms Servlet.  However, if you want to change the configuration via a web interface, you must also run the administration server (and Node Manager).

  All these components are much more complex than what I've described here.  I would recommend to consider the documentation if you are interested in learning about them.  That said, the best way to really learn about them likely will be to install the product and start using it.

• Dell C6100 HyperV Core reference and the Raid management

  I searched on the internet these days, trying to find and to shed light on certain issues, that we realized that we're not totally sure how to solve after the application of a C6100 Dell with HyperV on its blades.

  We have all the blades running with 4 drives, including two in a raid 1 configuration. We run HyperV based on all of its blades.

  What happens if one of those drives fails? 6100 raid configuration utility is in the BIOS, so it is obviously not an option. Since we use Core and have no GUI, other Dell RAID utilities are not going to work.

  How can you check the RAID health, other than just an orange flashing on a failed drive?

  Clrv salvation,

  The C6100 and the other cloud products are based on the IPMI 2.0 management standard and can have alerts sent using SNMP for drive failure or other errors. http://en.community.Dell.com/TechCenter/systems-management/w/wiki/1989.OpenManage-Essentials

• I just bought a new PC, and the extensions Manager won't let me upload 4 Kubota dashboard in CS5. He

  Cannot download the new dashboard of Kubota 4 on my new PC with windows 8. It would download on CS5. It tells me that I have administrator permission and don't tell me where to get this permission.

  Hi freddyfredster,

  Kubota 4 dashboard is a 3rd party software not related to Adobe.

  If she tells you that you do not have administrative permissions, this means that your user account has sufficient permissions to perform the required changes.

  You can check the links:

  http://www.eightforums.com/tutorials/5509-user-account-control-UAC-change-settings-Windows - 8 - a.html

  http://www.AddictiveTips.com/Windows-tips/take-ownership-of-files-folder-and-change-permis sions in windows 8.

• Unable to install Windows Vista, the system freezes at copying files and the extension of the files

  Original title: Setup error

  So I installed window vista Ultimate edition on my Mac, like two windows. I backed up all of my hard drives. so when I started to install everything went well until when it came in part from extension of files and copy files to the * something *. After like 20 minutes I had this error saying could not complete the installation because of corrupted files or something and then he is out. I tried homebasic, home premium etc. but I received an error even for each other. I went to the dealer where I bought the cd, returned and got another but still have the same thing

  Hello

  ·        What are your system specs?

  ·        How you try to install windows vista on the system? After the start of the desktop?

  ·        What is the exact error message that you experience when the system hangs during the installation?

  I suggest you to disconnect all external devices that are connected to the system such as (printers, scanners, etc.) and see if the problem is resolved.

  This occurs mainly, if the system (hardware or software) is not compatible with the operating system that you are trying to install on the system. I suggest you to format the partition in which you try to install Windows Vista, and then check if you are able to install the operating system or not.

  Installation and reinstallingWindows Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/installing-and-reinstalling-Windows-Vista

  I suggest you to check the below link.

  http://social.technet.Microsoft.com/forums/en-CA/itprovistadeployment/thread/6cb6510d-3e4f-4611-ba73-7e68fc4aa0a6

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• during the installation of the creative desktop application cloud there is a problem and the Installation Manager stops working. What should do?

  I have instaled Photoshop and Illustrator at the beginning of this year and now Photoshop won't start (in the pop-up window, there is a message that Manager application is necessary to solve a problem, and when I want to download manager nothing happens...)

  I also tried to start the creative cloud desktop application and after doubleclicking the icon nothing happened. I uninstalled the desktop app and I tried to install a new and there is a problem, cancellation befor theinstalation it ends. Adobe Illustrator works correctly. Help, please!

  uninstall all cc, clean by use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6 and then reinstall your cc, Download Adobe Creative Cloud apps desktop app | CC free trial Adobe

  Use the desktop application to install your programs of cc of adobe.

• My command prompt and the Task Manager opens and then closes quickly until I can read anything

  Any body guide me fast please...

  Hello

  I suggest you to follow these steps and check if that helps:
  Method 1:
  Start the computer in safe mode and check if the same problem occurs:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 2:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  Method 3:
  Try the running System File Checker and see if it helps:
  http://support.Microsoft.com/kb/310747

  It will be useful.