CS-MARS pnexp does not
I am running v4.3.6 (2841) below is the result of the command pnexp > export all.
I see that I log into the SFTP server (in the newspapers) and I create the folder as expected but nothing sent. I have permissions to read/write on the destination system. Any ideas of what could be the problem here?
pnexp > export all
Usage: export {config: data | all} {nfs_path} [MM/DD / YY:HH]
pnexp > export all sftp:1.1.1.1:/MARS
WARNING: This will stop CS-MARCH, you want to continue (yes/no): Yes
Estimates the total number of events of export: 223842332
Estimated time to export events: 6 hours, 13 minutes
Space for the exported events estimated: 10674 MB
You want to continue (yes/no): Yes
Enter the user name on 1.1.1.1: *.
Please enter the password: *
!!! Stopping the process of CS-MARCH...
!!! Export of configuration data on a local drive
Dumping of configuration data, can take a long time...
Dump configuration is complete.
Configdump to /tmp/Some_MARS_2010-06-17-17-02-19 completed successfully.
!!! Moving data from the remote host configuration
Error: unable to save the file to the remote host
What do you use for your SFTP server? It is in the list supported here:
The CS-MARS made use of SFTP and SCP to move files across during an export. If your server does not support the SCP, the export will fail.
Scott
Tags: Cisco Security
Similar Questions
-
date does not appear in the message list
For the many emails I get from various accounts date does not appear in the list of messages, only time.
It seems that these messages were received today, in fact they are old.Encountered this problem on 2 different PCs, 3 different email (gmail and own server) accounts.
What could be the cause and how to fix it?
IF you select Ctrl U _ on one of these messages, there is a right of the line at the top of the message
-Killed Mar 25 10:09 2014 is a message that I received today. This is the date and time Thunderbird has calculated, he received the messageLower on the list
Date is: sub form Date: Monday, March 24, 2014 23:32:50-0000
These two are of the same email.
E-mail uses time GMT so that the message has been sent to 24 March 2014 23:32:50 GMT.
Thunderbird uses my locale information to know that my timezone is GMT + 09:30 by result Mar 25 10:09
If your seeing odd times instead of dates, check that the information is correct as above.
Note that if the sender is their computer set to 1970 date then you will get mail today from them with the date of 1970. Even if they think it's in October that is what will show their mail. This is most important when dealing with people with limited computer skills. They do not appreciate that the date and time zone information are really relevant to them at all.
A favorite of spammers is to use a date in the future, so their junk is at the top of your e-mail list until you actually do something with it.
-
Solitaire T please help! Update of El Capitan: Bootcamp does not start
I have a MacBook Pro with a bootcamp Windows 7 partition. Windows 7 was working fine until I upgraded Mac OS 10.7.5 to 10.11.3 El Capitan. Now, the Windows 7 partition does not appear in system preferences > boot floppies or hold down the option key at startup.
I tried your steps to Re: [help] can't start Windows (8.1) after resizing partition
In my case, I installed gdisk and set the partition 4 (Microsoft Basic data) is bootable. Saved and has written the MBR, restarted the laptop, hold down option and still no display HD windows up to start from. Even tried to set all 4 partitions (i.e., recovery, EFI + Mac + Windows) to be bootable. Still does not work. Mac OS X system preferences > boot floppies does not display the windows partition. DiskUtility in Mac still shows the windows partition (~ 374). The drive is ~ 500G.
Trying not to panic, but afraid to lose all access to the windows partition. Any help or advice are appreciated.
Here is a list of commands from another article which seemed to help (commands entered in bold):
Disk Util list
Last login: Fri Mar 18 13:35:46 on ttys000
Rented-c02g63qadrjm: ~ list of the Egan$ diskutil
/ dev/disk0 (internal, physical):
#: NAME SIZE TYPE IDENTIFIER
0: GUID_partition_scheme * GB 500,1 disk0
1: disk0s1 EFI EFI 209.7 MB
2: Apple_CoreStorage Macintosh HD 125.0 GB disk0s2
3: disk0s3 Apple_Boot Recovery 650.0 MB HD
4: Microsoft data base 374,2 GB disk0s4
/ dev/disk1 (internal, virtual):
#: NAME SIZE TYPE IDENTIFIER
0: Apple_HFS Macintosh HD GB + 124.6 disk1
Logical volume on disk0s2
95C9BA16-04DB-45FE-B56D-7D8794B5D407
Unencrypted
Rented-c02g63qadrjm: ~ $ Egan
Cs diskutil list
Rented-c02g63qadrjm: ~ list of cs Egan$ diskutil
CoreStorage groups of logical volumes (1 found)
|
+ Logical Volume - Group 018660F0-AA71-475D-B7D8-FF318EF9F765
=========================================================
Name: Macintosh HD
Status: online
Dimensions: 124999999488 B (125.0 GB)
Free space: 18915328 B (18.9 MB)
|
+-Physical volume 024FC6AC-8287-4D93-A14C-2C6F4A71B64C
| ----------------------------------------------------
| Index: 0
| Disc: disk0s2
| Status: online
| Dimensions: 124999999488 B (125.0 GB)
|
+--> Logical volume family 6E4C150A-017D-4F6F-BB2C-730CDBF75500
----------------------------------------------------------
Encryption type: no
|
+--> Logical volume 95C9BA16-04DB-45FE-B56D-7D8794B5D407
---------------------------------------------------
Disc: disk1
Status: online
Size (Total): 124628762624 B (124.6 GB)
Reversible: Yes (no required decryption)
Name: Macintosh HD
Volume name: Macintosh HD
Content indicator: Apple_HFS
Rented-c02g63qadrjm: ~ $ Egan
sudo TPG - vv - r see the/dev/disk0
Rented-c02g63qadrjm: ~ Egan$ sudo TPG - vv - r show/dev/disk0
Password:
See the TPG: / dev/disk0: mediasize = 500107862016; SectorSize = 512; blocks = 976773168
See the TPG: / dev/disk0: MBR suspicious to sector 0
See the TPG: / dev/disk0: Pri GPT to sector 1
See the TPG: / dev/disk0: GPT Sec at sector 976773167
start index size summary
0 1 MBR
1 1 Pri GPT header
2 32 table GPT Pri
34 6
40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
409640 244140624 2 part TPG - 53746F72-6167-11AA-AA11-00306543ECAC
244550264 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC
245819800 1640
245821440 730951680 4 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
976773120 15
976773135 32 table dry GPT
976773167 1 dry GPT header
Rented-c02g63qadrjm: ~ $ Egan
sudo fdisk/dev/disk0
Rented-c02g63qadrjm: ~ Egan$ sudo TPG - vv - r show/dev/disk0
Password:
See the TPG: / dev/disk0: mediasize = 500107862016; SectorSize = 512; blocks = 976773168
See the TPG: / dev/disk0: MBR suspicious to sector 0
See the TPG: / dev/disk0: Pri GPT to sector 1
See the TPG: / dev/disk0: GPT Sec at sector 976773167
start index size summary
0 1 MBR
1 1 Pri GPT header
2 32 table GPT Pri
34 6
40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
409640 244140624 2 part TPG - 53746F72-6167-11AA-AA11-00306543ECAC
244550264 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC
245819800 1640
245821440 730951680 4 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
976773120 15
976773135 32 table dry GPT
976773167 1 dry GPT header
Rented-c02g63qadrjm: ~ Egan$ sudo fdisk/dev/disk0
Disk: geometry / dev/disk0: 60801/255/63 [976773168 sectors]
Signature: 0xAA55
From end
#: cyl hd s - cyl hd s id [Start - size]
------------------------------------------------------------------------
1: EA 0 0 2 - 0 0 40 1-39] < unknown ID >
* 2: EF 0 0 41 - 25 127 14 [40-409600] < unknown ID >
* 3: AF 25 127 15 - 1023 254 63 [409640-244140624] HFS +.
* 4: AB 1023 254 63 - 1023 254 63 Boot Darwin [244550264-1269536]
Please rebuild your MBR using 2-3-4 and say yes to good EFI for issue of grub. The current MBR is not going to work, because there is no entry for GPT4. Please let me know if you need the exact steps.
The link you have used is a special case where a use has created a 'extra' partition, so we use a 3-4-5, but your case is standard configuration with 2 3 4A partitions of the hybrid.
-
Win XP on Satellite M30X does not start after battery was flat
XP on M30X will not start after battery was flat! Safe mode, last work... nothing works!
The restore CD offers 3 options1: new installation, 2 toshiba recovery utility (expert mode) und 9 output.How do the XP Recovery console, or how to use 2 to restore the system without losing any files.
Thanks for the tips.
It is a nite Mare...Wolf
Good dayThe point is that the Toshiba Recovery CD does not have the Windows XP repair console.
The restore CD contains the image of Toshiba and you can just reinstall the system on the HARD drive and no repair.Now you have 2 options of recovery.
First called standard recovery option would be to format the entire HARD drive and reinstalling the image.
The second option called recovery expert allows you to reinstall the operating system on a selected partition. Then only this partition will be formatted.If you do not want to format the whole HARD drive then you select the second option and select the partition to a new operating system.
-
OfficeJet pro 8600 more connects wireless, but does not connect to Internet
I use Windows 7. The free thread is ideal for printing, but I do not understand why the web
does not connect.
Hi susea;
Hope you are doing well and I'm sorry that you are having problems.
Jean-Marie this tool; http://support.HP.com/us-en/document/c02037530
If that didn't help then share what router you're using, please indicate brand and model? I'll offer to make sure that your router is updated with the most recent firmware, also I personally always use Google's DNS servers. Some servers DNS provided by your ISP (Internet service Provider)
You can change this setting by going to do the following:
Press the Win key on your keyboard.
- Type Ncpa.cpl (this will take you to the network connections)
- Select your wireless connection
- You will see a screen on the botton, you will see a button called properties, near the left button
- On the Properties menu go to IpV4 (if you don't see scroll down) double-click to open
- In this screen, you will see (get IP address automatically) slot that you wil see the Obtain DNS server address automatically select this option
- Type 8.8.8.8 and 8.8.4.4 airfield
I will also choose a static IP address, and this can be done here as well.
-
Hi team, Okay, so what we have observed in our network is that flow-export sometimes causes high interface utilization and as a workaround, we remove and re-add flow export commands. Now there are short burstd of traffic as well, so I want to add a condition where "burst happens 3 times in 60s, then trigger the event". As I cannot test in production router, so I am testing on a lab switch and there is not much traffic on it. txload/rxload is 1 and hence my applet looks like this: sw1-trn-mr3.hyd.shaw.net#sh run | b event manager event manager applet test authorization bypass event tag 1 interface name GigabitEthernet0/4 parameter txload entry-op ge entry-val 1 entry-type value exit-op lt exit-val 1 exit-type value poll-interval 10 event tag 2 interface name GigabitEthernet0/4 parameter rxload entry-op ge entry-val 1 entry-type value exit-op lt exit-val 1 exit-type value poll-interval 10 trigger occurs 3 period 60 correlate event 1 or event 2 action 1.1 cli command "enable" action 1.2 syslog msg "Interface utilization has risen again. " action 1.3 cli command "show proc cpu | append flash:test" action 1.4 cli command "show interface GigabitEthernet0/4 | append flash:test" action 1.6 cli command "show ip cache flow | append flash:test" action 1.7 cli command "show tech | append flash:test" action 2.2 cli command "no ip flow-export source GigabitEthernet0/4" action 2.3 cli command "no ip flow-export destination 192.168.1.1 2055" action 2.5 cli command "ip flow-export source GigabitEthernet0/4" action 2.6 cli command "ip flow-export destination 192.168.1.1 2055" action 2.9 cli command "end" ! end The thing is it does not work. I turned on debugs and I see this. Mar 3 15:30:46: fh_send_intf_fd_msg: msg_type=114 Mar 3 15:30:46: fh_send_intf_fd_msg: sval=0 Mar 3 15:30:46: fh_send_intf_fd_msg: msg_type=114 Mar 3 15:30:46: fh_send_intf_fd_msg: sval=0 Mar 3 15:30:54: fh_fd_intf_process_async Mar 3 15:30:54: fh_fd_intf_param_fetch:I/F=GigabitEthernet0/4 txload=1 Mar 3 15:30:54: intf_value_uint_compare:op1=1 op2=1 ret=TRUE Mar 3 15:30:54: intf_entry_value_check:Returning TRUE Mar 3 15:30:54: fh_fd_intf_event_match: re = 0x5849AA0, num_matches = 1 Mar 3 15:30:54: fh_fd_intf_start_poll_timer: start_t=10000 Mar 3 15:30:54: fh_fd_intf_process_poll_timer: update_t=0 Mar 3 15:30:54: fh_fd_intf_param_fetch:I/F=GigabitEthernet0/4 rxload=1 Mar 3 15:30:54: intf_value_uint_compare:op1=1 op2=1 ret=TRUE Mar 3 15:30:54: intf_entry_value_check:Returning TRUE Mar 3 15:30:54: fh_fd_intf_event_match: re = 0x56D793C, num_matches = 1 Mar 3 15:30:54: fh_fd_intf_start_poll_timer: start_t=10000 Mar 3 15:30:54: fh_fd_intf_process_poll_timer: update_t=0 Mar 3 15:30:54: fh_send_intf_fd_msg: msg_type=64 Mar 3 15:30:54: fh_send_intf_fd_msg: sval=63 Mar 3 15:30:54: fh_send_intf_fd_msg: msg_type=64 Mar 3 15:30:54: fh_send_intf_fd_msg: sval=0 Mar 3 15:31:04: fh_fd_intf_process_async Mar 3 15:31:04: fh_fd_intf_param_fetch:I/F=GigabitEthernet0/4 txload=1 Mar 3 15:31:04: intf_value_uint_compare:op1=1 op2=1 ret=FALSE Mar 3 15:31:04: intf_exit_value_check: re=0x5849AA0, returning=FALSE Mar 3 15:31:04: intf_exit_comb_check:Returning FALSE Mar 3 15:31:04: fh_fd_intf_event_match: re = 0x5849AA0, num_matches = 0 Mar 3 15:31:04: fh_fd_intf_start_poll_timer: start_t=10000 Mar 3 15:31:04: fh_fd_intf_process_poll_timer: update_t=0 Mar 3 15:31:04: fh_fd_intf_param_fetch:I/F=GigabitEthernet0/4 rxload=1 Mar 3 15:31:04: intf_value_uint_compare:op1=1 op2=1 ret=FALSE Mar 3 15:31:04: intf_exit_value_check: re=0x56D793C, returning=FALSE Mar 3 15:31:04: intf_exit_comb_check:Returning FALSE Mar 3 15:31:04: fh_fd_intf_event_match: re = 0x56D793C, num_matches = 0 Only the first time, it returns TRUE. After that, it returns FALSE always and hence the condition "trigger occurs 3 period 60" does not match and hence no event is triggered. Where am I going wrong? Appreciate your help on this.
Thanks.
You have a condition of release of ' lt 1. This means that the burden must fall below 1 until the event to rearm. In this case, it seems that the load is always 1, so you will not see the three events occur. You have to push some of the traffic through this interface to complete your test.
In addition, you are away:
Action 2.1, cli «config t» command
And probably, you will need to extend the first event with a maxrun parameter I am sure that this policy will have more than 20 seconds to run.
-
ASA 5505. VPN Site-to-Site does not connect!
Hello!
Already more than a week there, as we had a new channel of communication of MGTSa (Ontario terminal Sercomm RV6688BCM, who barely made in the 'bridge' - had to do the provider in order to receive our white Cisco Ip address), and now I train as well more that one week to raise between our IKEv1 IPsec Site-to-Site VPN tunnel closes offices.
Configurable and use the wizard in ASDM and handles in the CLI, the result of a year, the connection does not rise.
Cisco version 9.2 (2), the image of the Cisco asa922 - k8.bin, Security Plus license version, version 7.2 AMPS (2).
What I'll never know...
Debugging and complete configuration enclose below.
Help, which can follow any responses, please! I was completely exhausted!Config:
Output of the command: "sh run".
: Saved
:
: Serial: XXXXXXXXXXXX
: Material: ASA5505, 512 MB RAM, 500 MHz Geode Processor
:
ASA Version 9.2 (2)
!
hostname door-71
activate the encrypted password of F6OJ0GOws7WHxeql
names of
IP local pool vpnpool 10.1.72.100 - 10.1.72.120 mask 255.255.255.0
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 10.1.72.254 255.255.255.0
!
interface Vlan2
nameif outside_mgts
security-level 0
62.112.100.R1 255.255.255.252 IP address
!
passive FTP mode
clock timezone 3 MSK/MSD
clock to DST MSK/MDD recurring last Sun Mar 02:00 last Sun Oct 03:00
DNS lookup field inside
DNS server-group MGTS
Server name 195.34.31.50
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
network obj_any object
subnet 0.0.0.0 0.0.0.0
network of the NET72 object
10.1.72.0 subnet 255.255.255.0
network object obj - 0.0.0.0
host 0.0.0.0
network of the Nafanya object
Home 10.1.72.5
network object obj - 10.1.72.0
10.1.72.0 subnet 255.255.255.0
network of the NET61 object
10.1.61.0 subnet 255.255.255.0
network of the NETWORK_OBJ_10.1.72.96_27 object
subnet 10.1.72.96 255.255.255.224
network of the NETT72 object
10.1.72.0 subnet 255.255.255.0
network of the NET30 object
10.1.30.0 subnet 255.255.255.0
network of the NETWORK_OBJ_10.1.72.0_24 object
10.1.72.0 subnet 255.255.255.0
object-group service OG INET
the purpose of the echo icmp message service
response to echo icmp service object
service-object icmp traceroute
service-object unreachable icmp
service-purpose tcp - udp destination eq echo
the DM_INLINE_NETWORK_1 object-group network
network-object NET30
network-object, object NET72
DM_INLINE_TCP_1 tcp service object-group
port-object eq www
EQ object of the https port
inside_access_in extended access list permit ip object NET72 object-group DM_INLINE_NETWORK_1
access extensive list ip 10.1.72.0 inside_access_in allow 255.255.255.0 any
inside_access_in extended access list permit ip object Nafanya any idle state
inside_access_in list extended access allowed object-group OG INET an entire
inside_access_in of access allowed any ip an extended list
inside_access_in list extended access deny ip any alerts on any newspaper
outside_mgts_access_in list extended access allowed object-group OG INET an entire
outside_mgts_access_in list extended access permit tcp any any DM_INLINE_TCP_1 object-group
outside_mgts_access_in list extended access deny ip any alerts on any newspaper
access extensive list ip 10.1.72.0 outside_mgts_cryptomap allow 255.255.255.0 object NET61
VPN-ST_splitTunnelAcl permit 10.1.72.0 access list standard 255.255.255.0
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
outside_mgts MTU 1500
IP check path reverse interface outside_mgts
no failover
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
no permit-nonconnected arp
NAT (inside outside_mgts) static source NET72 NET72 NETWORK_OBJ_10.1.72.96_27 NETWORK_OBJ_10.1.72.96_27 non-proxy-arp-search of route static destination
NAT (inside outside_mgts) static source NETWORK_OBJ_10.1.72.0_24 NETWORK_OBJ_10.1.72.0_24 NET61 NET61 non-proxy-arp-search of route static destination
!
network obj_any object
NAT (inside outside_mgts) dynamic obj - 0.0.0.0
network of the NET72 object
NAT (inside outside_mgts) interface dynamic dns
inside_access_in access to the interface inside group
Access-group outside_mgts_access_in in the outside_mgts interface
Route 0.0.0.0 outside_mgts 0.0.0.0 62.112.100.R 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
without activating the user identity
identity of the user by default-domain LOCAL
AAA authentication http LOCAL console
the ssh LOCAL console AAA authentication
Enable http server
http 10.1.72.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-TRANS-aes - esp esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit
Crypto ipsec ikev2 AES256 ipsec-proposal
Protocol esp encryption aes-256
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES192
Protocol esp encryption aes-192
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES
Esp aes encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 proposal ipsec 3DES
Esp 3des encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal OF
encryption protocol esp
Esp integrity sha - 1, md5 Protocol
Crypto ipsec pmtu aging infinite - the security association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev2 AES256 AES192 AES 3DES ipsec-proposal OF
card crypto outside_mgts_map 1 match address outside_mgts_cryptomap
card crypto outside_mgts_map 1 set pfs Group1
peer set card crypto outside_mgts_map 1 91.188.180.42
card crypto outside_mgts_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_mgts_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
card crypto outside_mgts_map interface outside_mgts
inside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
inside crypto map inside_map interface
Crypto ca trustpoint ASDM_TrustPoint0
registration auto
E-mail [email protected] / * /
name of the object CN = door-71
Serial number
IP address 62.112.100.42
Proxy-loc-transmitter
Configure CRL
Crypto ca trustpoint ASDM_TrustPoint1
registration auto
ASDM_TrustPoint1 key pair
Configure CRL
trustpool crypto ca policy
string encryption ca ASDM_TrustPoint0 certificates
certificate eff26954
30820395 3082027d a0030201 020204ef f2695430 0d06092a 864886f7 0d 010105
019
6460ae26 ec5f301d 0603551d 0e041604 14c9a3f2 d70e6789 38fa4b01 465d 1964
60ae26ec 5f300d06 092 has 8648 01050500 03820101 00448753 7baa5c77 86f70d01
62857b 65 d05dc91e 3edfabc6 7b3771af bbedee14 673ec67d 3d0c2de4 b7a7ac05
5f203a8c 98ab52cf 076401e5 1a2c6cb9 3f7afcba 52c617a5 644ece10 d6e1fd7d
28b57d8c aaf49023 2037527e 9fcfa218 9883191f 60b221bf a561f2be d6882091
0222b7a3 3880d6ac 49328d1f 2e085b15 6d1c1141 5f850e5c b6cb3e67 0e373591
94a 82781 44493217 and 38097952 d 003 5552 5c445f1f 92f04039 a23fba20 b9d51b13
f511f311 d1feb2bb 6d056a15 7e63cc1b 1f134677 8124c 024 3af56b97 51af8253
486844bc b1954abe 8acd7108 5e4212df db835d76 98ffdb2b 8c8ab915 193b 8167
0db3dd54 c8346b96 c4f4eff7 1e7cd576 a8b1f86e 3b868a6e 89
quit smoking
string encryption ca ASDM_TrustPoint1 certificates
certificate a39a2b54
3082025f 30820377 a0030201 020204 has 3 9a2b5430 0d06092a 864886f7 0d 010105
0500304 06035504 03130767 36313137 30120603 55040513 6174652d 3110300e b
c084dcd9 d250e194 abcb3eb8 1da93bd0 fb0dba1a b1c35b43 d547a841 5d4ee1a4
14bdb207 7dd790a4 0cd 70471 5f3a896a 07bd56dc ea01b3dd 254cde88 e1490e97
f3e54c05 551adde0 66aa3782 c85880c2 b162ec29 4e49346a df71062d 6d6d8f49
62b9de93 ba07b4f7 a50e77e1 8f54b32b 6627cb27 e982b36f a 362973, 0 88de3272
9bd6d4d2 8ca1e11f 214f20a9 78bdea95 78fdc45c d6d45674 6acb9bcb d0bd930e
638eedfe cd559ab1 e1205c48 3ee9616f e631db55 e82b623c 434ffdc1 11020301
0001 has 363 3061300f 0603551d 130101ff 0101ff30 04053003 0e060355 1d0f0101
ff040403 1f060355 02018630 230418 30168014 0cea70bf 0d0e0c4b eb34a0b1 1 d
8242 has 549 0603 551d0e04 1604140c ea70bf0d 0e0c4beb 34a0b182 301D 5183ccf9
42a 54951 010105 05000382 0101004e 7bfe054a 0d 864886f7 0d06092a 83ccf930
d434a27c 1d3dce15 529bdc5f 70a2dff1 98975de9 2a97333b 96077966 05a8e9ef
bf320cbd ecec3819 ade20a86 9aeb5bde bd129c7b 29341e4b edf91473 f2bf235d
9aaeae21 a629ccc6 3c79200b b9a89b08 bf38afb6 ea56b957 4430f692 a 4745, 411
34d71fad 588e4e18 2b2d97af b2aae6b9 b6a22350 d031615b 49ea9b9f 2fdd82e6
ebd4dccd df93c17e deceb796 f268abf1 881409b 5 89183841 f484f0e7 bd5f7b69
ebf7481c faf69d3e 9d24df6e 9c2b0791 785019f7 a0d20e95 2ef35799 66ffc819
4a77cdf2 c6fb4380 fe94c13c d4261655 7bf3d6ba 6289dc8b f9aad4e1 bd918fb7
32916fe1 477666ab c2a3d591 a84dd435 51711f6e 93e2bd84 89884c
quit smoking
crypto isakmp identity address
IKEv2 crypto policy 1
aes-256 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 10
aes-192 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 20
aes encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 30
3des encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 40
the Encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
Crypto ikev2 activate outside_mgts port 443 customer service
Crypto ikev2 access remote trustpoint ASDM_TrustPoint0
Crypto ikev1 allow inside
Crypto ikev1 enable outside_mgts
IKEv1 crypto policy 10
authentication crack
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 20
authentication rsa - sig
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 30
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 40
authentication crack
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 50
authentication rsa - sig
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 60
preshared authentication
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 70
authentication crack
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 80
authentication rsa - sig
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 90
preshared authentication
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 100
authentication crack
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 110
authentication rsa - sig
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 120
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 130
authentication crack
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 140
authentication rsa - sig
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 150
preshared authentication
the Encryption
sha hash
Group 2
life 86400
Telnet timeout 5
without ssh stricthostkeycheck
SSH 10.1.72.0 255.255.255.0 inside
SSH timeout 60
SSH group dh-Group1-sha1 key exchange
Console timeout 0
vpnclient Server 91.188.180.X
vpnclient mode network-extension-mode
vpnclient nem-st-autoconnect
VPN - L2L vpnclient vpngroup password *.
vpnclient username aradetskayaL password *.
dhcpd auto_config outside_mgts
!
dhcpd update dns replace all two interface inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
SSL-trust ASDM_TrustPoint0 inside point
SSL-trust ASDM_TrustPoint0 outside_mgts point
WebVPN
Select outside_mgts
internal GroupPolicy_91.188.180.X group strategy
attributes of Group Policy GroupPolicy_91.188.180.X
Ikev1 VPN-tunnel-Protocol
internal group VPN - ST strategy
attributes of group VPN - ST policy
value of 195.34.31.50 DNS Server 8.8.8.8
Ikev1 VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value VPN-ST_splitTunnelAcl
by default no
aradetskayaL encrypted HR3qeva85hzXT6KK privilege 15 password username
tunnel-group 91.188.180.X type ipsec-l2l
attributes global-tunnel-group 91.188.180.X
Group - default policy - GroupPolicy_91.188.180.42
IPSec-attributes tunnel-group 91.188.180.X
IKEv1 pre-shared-key *.
remote control-IKEv2 pre-shared-key authentication *.
remotely IKEv2 authentication certificate
pre-shared-key authentication local IKEv2 *.
remote access to tunnel-group VPN - ST type
VPN-general ST-attributes tunnel-group
address vpnpool pool
Group Policy - by default-VPN-ST
tunnel-group ipsec VPN ST-attributes
IKEv1 pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
inspect the icmp
inspect the icmp error
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:212e4f5035793d1c219fed57751983d8
: enddoor-71 # sh crypto ikev1 hisThere are no SAs IKEv1
door-71 # sh crypto ikev2 hisThere are no SAs IKEv2
door-71 # sh crypto ipsec his
There is no ipsec security associationsdoor-71 # sh crypto isakmpThere are no SAs IKEv1
There are no SAs IKEv2
Global statistics IKEv1
The active Tunnels: 0
Previous Tunnels: 0
In bytes: 0
In the packages: 0
In packs of fall: 0
In Notifys: 0
In the constituencies of P2: 0
In P2 invalid Exchange: 0
In P2 Exchange rejects: 0
Requests for removal in his P2: 0
Bytes: 0
Package: 0
Fall packages: 0
NOTIFYs out: 0
Exchanges of P2: 0
The Invalides Exchange P2: 0
Exchange of P2 rejects: 0
Requests to remove on P2 Sa: 0
Tunnels of the initiator: 0
Initiator fails: 0
Answering machine fails: 0
Ability system breaks down: 0
AUTH failed: 0
Decrypt failed: 0
Valid hash fails: 0
No failure his: 0IKEV1 statistics for Admission appeals
In negotiating SAs Max: 25
In negotiating SAs: 0
In negotiating SAs Highwater: 0
In negotiating SAs rejected: 0Global statistics IKEv2
The active Tunnels: 0
Previous Tunnels: 0
In bytes: 0
In the packages: 0
In packs of fall: 0
In Fragments of fall: 0
In Notifys: 0
In Exchange for the P2: 0
In P2 invalid Exchange: 0
In P2 Exchange rejects: 0
In IPSEC delete: 0
In delete IKE: 0
Bytes: 0
Package: 0
Fall packages: 0
Fragments of fall: 0
NOTIFYs out: 0
Exchange of P2: 0
The Invalides Exchange P2: 0
Exchange of P2 rejects: 0
On IPSEC delete: 0
The IKE Delete: 0
Locally launched sAs: 0
Locally launched sAs failed: 0
SAs remotely initiated: 0
SAs remotely initiated failed: 0
System capacity: 0
Authentication failures: 0
Decrypt failures: 0
Hash failures: 0
Invalid SPI: 0
In the Configs: 0
Configs: 0
In the Configs rejects: 0
Configs rejects: 0
Previous Tunnels: 0
Previous Tunnels wraps: 0
In the DPD Messages: 0
The DPD Messages: 0
The NAT KeepAlive: 0
IKE recomposition launched locally: 0
IKE returned to the remote initiated key: 0
Generate a new key CHILD initiated locally: 0
CHILD given to the remote initiated key: 0IKEV2 statistics for Admission appeals
Max active SAs: no limit
Max in negotiating SAs: 50
Challenge cookie line: never
Active sAs: 0
In negotiating SAs: 0
Incoming requests: 0
Accepted incoming requests: 0
A rejected incoming requests: 0
Out of requests: 0
Out of the applications accepted: 0
The outgoing rejected requests: 0
A rejected queries: 0
Rejected at the SA: 0 Max limit
Rejected low resources: 0
Rejected the current reboot: 0
Challenges of cookie: 0
Cookies transmitted challenges: 0
Challenges of cookie failed: 0IKEv1 global IPSec over TCP statistics
--------------------------------
Embryonic connections: 0
Active connections: 0
Previous connections: 0
Incoming packets: 0
Inbound packets ignored: 0
Outgoing packets: 0
Outbound packets ignored: 0
The RST packets: 0
Heartbeat Recevied ACK packets: 0
Bad headers: 0
Bad trailers: 0
Chess timer: 0
Checksum errors: 0
Internal error: 0door-71 # sh statistical protocol all cryptographic
[Statistics IKEv1]
Encrypt packets of requests: 0
Encapsulate packets of requests: 0
Decrypt packets of requests: 0
Decapsulating requests for package: 0
HMAC calculation queries: 0
ITS creation queries: 0
SA asked to generate a new key: 0
Deletion requests: 0
Next phase of allocation key applications: 0
Number of random generation queries: 0
Failed requests: 0
[Statistics IKEv2]
Encrypt packets of requests: 0
Encapsulate packets of requests: 0
Decrypt packets of requests: 0
Decapsulating requests for package: 0
HMAC calculation queries: 0
ITS creation queries: 0
SA asked to generate a new key: 0
Deletion requests: 0
Next phase of allocation key applications: 0
Number of random generation queries: 0
Failed requests: 0
[IPsec statistics]
Encrypt packets of requests: 0
Encapsulate packets of requests: 0
Decrypt packets of requests: 0
Decapsulating requests for package: 0
HMAC calculation queries: 0
ITS creation queries: 0
SA asked to generate a new key: 0
Deletion requests: 0
Next phase of allocation key applications: 0
Number of random generation queries: 0
Failed requests: 0
[SSL statistics]
Encrypt packets of queries: 19331
Encapsulate packets of queries: 19331
Decrypt packets of queries: 437
Package requests decapsulating: 437
HMAC calculation queries: 19768
ITS creation queries: 178
SA asked to generate a new key: 0
Requests to remove SA: 176
Next phase of allocation key applications: 0
Number of random generation queries: 0
Failed requests: 0
[Statistical SSH are not taken in charge]
[Statistics SRTP]
Encrypt packets of requests: 0
Encapsulate packets of requests: 0
Decrypt packets of requests: 0
Decapsulating requests for package: 0
HMAC calculation queries: 0
ITS creation queries: 0
SA asked to generate a new key: 0
Deletion requests: 0
Next phase of allocation key applications: 0
Number of random generation queries: 0
Failed requests: 0
[Statistics]
Encrypt packets of requests: 0
Encapsulate packets of requests: 0
Decrypt packets of requests: 0
Decapsulating requests for package: 0
HMAC calculation queries: 6238
ITS creation queries: 0
SA asked to generate a new key: 0
Deletion requests: 0
Next phase of allocation key applications: 0
Number of queries random generation: 76
Failure of queries: 9door-71 # sh crypto ca trustpoints
Trustpoint ASDM_TrustPoint0:
Configured for the production of a self-signed certificate.Trustpoint ASDM_TrustPoint1:
Configured for the production of a self-signed certificate.If you need something more, then spread!
Please explain why it is that I don't want to work?Hello
When the IPSEC tunnel does not come to the top, the first thing comes to my mind is to run a tracer of package from the CLI and the phases in it. Please run this command from your firewall side and share the output. I've just compiled this command with the random ip address and ports of your given range.
Packet-trace entry inside tcp 10.1.72.2 1233 10.1.61.2 443 detailed
Best regards
Amandine
-
MGCP FXO does not register with CUCM on VG204XM
I have a VG204XM running MGCP with CUCM 10.5. When the port is changed and reset him CUCM config push down to the VG204XM there is an error (it is identical to the Bug CSCtr78616 reported on a router 28xx in 2011)
In the newspapers, I see that, once the router receives the config it tried to configure AALN/S0 / / 0 (voice-port 0/0)
However, for some reason, it seems that the router is to convert the port to a 65535 instead of 0"cmapp_xml_get_interface_info: slot = 0 vic = 65535 port = 0".
Since the port above does not exist on the router the survey attempt a mistake.
Mar 27 18:07:59.278: % SYS-5-CONFIG_I: configured from console by console
Mar 27 18:07:59.278: cmapp_xml_get_interface_info:
18:07:59.278 Mar 27: =.
Mar 27 18:07:59.278: cmapp_xml_get_interface_info: slot = 0 vic = 65535 port = 0
18:07:59.278 Mar 27: Interface_name: AALN/S0/0
Mar 27 18:07:59.278: controller:
18:07:59.278 Mar 27: addr: 65535/0/0
Mar 27 18:07:59.278: interface:
Mar 27 18:07:59.278: voice_port: voice-port 65535/0/0
Mar 27 18:07:59.278: dial_peer: voice dial-peer 9990655350
Mar 27 18:07:59.278: dial_peer_port: 65535/0/0
Mar 27 18:07:59.278:
Mar 27 18:07:59.278: cmapp_xml_configure_router: verification of the Deleted interfaces
Mar 27 18:07:59.278: cmapp_xml_get_intf: looking for a vdb [65535/0/0]
Mar 27 18:07:59.278: cmapp_xml_configure_router: analog ports are ready
Mar 27 18:07:59.278: cmapp_xml_find_corr_intf_cfg:
Mar 27 18:07:59.278: cmapp_xml_find_corr_intf_cfg: old_cfg is NULL
Mar 27 18:07:59.282: cmapp_xml_intf_cfg_changed:
Mar 27 18:07:59.282: old intf configuration is null
Mar 27 18:07:59.282: cmapp_xml_cfg_analog_intf:
Mar 27 18:07:59.282: cmapp_mgcp_get_card_type_for_analog_intf: looking for a vdb [65535/0/0]
Mar 27 18:07:59.294: cmapp_xml_cfg_router_intf: intf configuration: [voice-port 65535/0/0]
Mar 27 18:07:59.294: cmapp_xml_cfg_router_intf: configuration [echo - cancel enable]
Mar 27 18:07:59.298: % SYS-5-CONFIG_I: configured from console by console
Mar 27 18:07:59.298: cmapp_xml_cfg_router_intf: 395 line router configuration error
Mar 27 18:07:59.298: cmapp_xml_send_msg_to_callmgr: CMBH_MSG_CFG_ERR of sending
Mar 27 18:07:59.298: * info ERROR: the router configuration failed: voice-port 65535/0/0
echo - cancel enable
endI have a VG224 gateways running with MGCP CUCM 10,5 and no error
Everyone knows about this problem on VG204XM?
Hello
Please check
https://Tools.Cisco.com/bugsearch/bug/CSCui83022/?reffering_site=dumpcr
Auto config MGCP fails for VG204XM -
802. 1 x authentication port does not
Pass the info:
SW-ConfB > sho worm
Cisco IOS software, software of C2960C (C2960c405-UNIVERSALK9-M), Version 12.2 (55) EX3, VERSION of the SOFTWARE (fc2)
Port config:
interface FastEthernet0/11
switchport mode access
authentication event failure action allow vlan 900
no response from the authentication event action allow vlan 900
Auto control of the port of authentication
dot1x EAP authenticator
dot1x tx-period 5
The RADIUS server info:
key acct-port 1646 1645 auth-RADIUS-server host 10.0.1.52 port 802.1 x!
A little confused why not package Radius comes even from the switch. Any tips?
According to debug it, it seems that the supplicant connected on the switch port does not support the dot1x and MAB is not configured on the switchport so no method left to try and you got the vlan COMMENTS.
3 Mar 04:37:47.963: % AUTHMGR-7-RESULT: authentication result 'no response' of 'dot1x' for the customer (d4be.d907.9637) on the Interface Fa0/11 AuditSessionID 0A000103000000090B4AD0F6
* 04:37:47.963 3 Mar: % AUTHMGR-7-FAILOVER: failover "dot1x' for the client (d4be.d907.9637) on the Interface Fa0/11 AuditSessionID 0A000103000000090B4AD0F6
* 04:37:47.963 3 Mar: AUTHMGR-7-NOMOREMETHODS %: exhausted all methods of authentication for the clientAt this point, the RADIUS is not even came into the picture. Please make sure that the end customer is configured correctly for the dot1x parameters.
Kind regards
Jatin kone
* Make the rate of useful messages *.
-
Cisco AIR-LAP1041N-E-K9 does not not with WLC 4402 version 7.0.116.0
Hi all
appreciate your support for a problem I started to deal with today. I have a Cisco WLC 4402 running the 7.0.116.0 version and it's great to work with 25 Cisco 1252 access points. We received a new 20 Cisco 1041N APs today and I installed one in our site, but it does not work. He well worked and loaded the flash image and obtained WLC ip through DHCP option address and began to show the below error:
* 00:00:10.021 Mar 1: % SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: crypto IOS FIPS self-test passed
* 00:00:10.033 Mar 1: * CRASH_LOG = YES
* 00:00:10.333 Mar 1: 1 Port is not presentSecurity base.
MAC Ethernet address of base: C8:9 C: 1 D: 53:57:5E
* 00:00:11.373 Mar 1: % SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: crypto RADIO FIPS self-test passed on Dot11Radio interface 0
* 00:00:11.465 Mar 1: % LWAPP-3-CLIENTEVENTLOG: reading and initialized AP event log (contains, 1088 messages)
* 00:00:11.494 Mar 1: State of the voice_diag_test of WLC is false
* 00:00:12.526 Mar 1: % LINK-3-UPDOWN: Interface GigabitEthernet0, changed State to
* 00:00:13.594 Mar 1: % LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed State to
* 00:00:13.647 Mar 1: % SYS-5-RESTART: System restarted.
Cisco IOS software, software C1040 (C1140-K9W8-M), Version 12.4 (23 c) JA2, VERSION of the SOFTWARE (fc3)
Technical support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Updated Thursday, April 13, 11 12:50 by prod_rel_team
* 00:00:13.647 Mar 1: % SNMP-5-start COLD: SNMP agent on host APc89c.1d53.575e knows a cold start
* 00:08:59.062 Mar 1: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY
* 1 Mar 00:08:59.062: bsnInitRcbSlot: slot 1 has NO radio
* 00:08:59.138 Mar 1: % LINK-5-CHANGED: Interface Dot11Radio0, changed State to reset
* 00:08:59.837 Mar 1: % SSH-5-ACTIVATED: SSH 2.0 has been activated
* 00:09:00.145 Mar 1: % LINEPROTO-5-UPDOWN: Line protocol on the Interface Dot11Radio0, state change downstairs
* 00:09:09.136 Mar 1: % ADDRESS_ASSIGN-6-DHCP: Interface GigabitEthernet0 assigned address DHCP 172.16.26.81, mask 255.255.255.0, hostname APc89c.1d53.575e
* 00:09:17.912 Mar 1: % PARSER-4-BADCFG: unexpected end of the configuration file.
* 00:09:17.912 Mar 1: State of the voice_diag_test of WLC is false
* 00:09:17.984 Mar 1: message logging LWAPP to 255.255.255.255.
* 00:09:19.865 Mar 1: % CDP_PD-4-POWER_OK: full power - supply NEGOTIATED online
* 00:09:19.886 Mar 1: % LINK-3-UPDOWN: Interface Dot11Radio0, changed State to
* 00:09:20.873 Mar 1: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed State to
* 00:09:20.874 Mar 1: % SYS-6-LOGGINGHOST_STARTSTOP: logging to host started 255.255.255.255 - initiated CLI
Translate "CISCO-CAPWAP - CONTROLLER.atheertele.com"... the domain server (172.16.40.240)
* 00:09:29.029 Mar 1: % CAPWAP-5-DHCP_OPTION_43: the 172.16.100.102 drive address obtained by DHCP
* 08:27:02.000 may 25: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.16.100.101 peer_port: 5246
* 08:27:02.001 may 25: % CAPWAP-5-CHANGED: CAPWAP changed State to
* 08:27:03.175 may 25: % CAPWAP-5-DTLSREQSUCC: DTLS connection created successfully peer_ip: 172.16.100.101 peer_port: 5246
* 08:27:03.177 may 25: % CAPWAP-5-SENDJOIN: send request to join 172.16.100.101
* 08:27:03.177 may 25: % CAPWAP-5-CHANGED: CAPWAP changed State to ADHERE
* 08:27:03.329 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state CFG
* 08:27:03.333 may 25: % DTLS-5-ALERT: WARNING received: close notify alert from 172.16.100.101
* 25 May 08:27:03.333: % PEER_DISCONNECT-5-DTLS: Peer 172.16.100.101 has closed the connection.
* 08:27:03.333 may 25: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 172.16.100.101:5246
* 08:27:03.378 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY
* 08:27:03.378 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY
* 25 May 08:27:03.378: bsnInitRcbSlot: slot 1 has NO radio
* 25 May 08:27:03.448: State of the voice_diag_test of WLC is false
* 08:27:14.000 may 25: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.16.100.101 peer_port: 5246
* 08:27:14.001 may 25: % CAPWAP-5-CHANGED: CAPWAP changed State to
* 08:27:15.185 may 25: % CAPWAP-5-DTLSREQSUCC: DTLS connection created successfully peer_ip: 172.16.100.101 peer_port: 5246
* 08:27:15.186 may 25: % CAPWAP-5-SENDJOIN: send request to join 172.16.100.101
* 08:27:15.186 may 25: % CAPWAP-5-CHANGED: CAPWAP changed State to ADHERE
* 08:27:15.330 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state CFG
* 08:27:15.333 may 25: % DTLS-5-ALERT: WARNING received: close notify alert from 172.16.100.101
* 25 May 08:27:15.334: % PEER_DISCONNECT-5-DTLS: Peer 172.16.100.101 has closed the connection.
* 08:27:15.334 may 25: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 172.16.100.101:5246
* 08:27:15.379 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY
* 08:27:15.379 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY
* 25 May 08:27:15.379: bsnInitRcbSlot: slot 1 has NO radio
* 25 May 08:27:15.450: State of the voice_diag_test of WLC is false
* 08:27:26.000 may 25: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.16.100.101 peer_port: 5246
* 08:27:26.001 may 25: % CAPWAP-5-CHANGED: CAPWAP changed State to
* 08:27:27.182 may 25: % CAPWAP-5-DTLSREQSUCC: DTLS connection created successfully peer_ip: 172.16.100.101 peer_port: 5246
* 08:27:27.183 may 25: % CAPWAP-5-SENDJOIN: send request to join 172.16.100.101
* 08:27:27.184 may 25: % CAPWAP-5-CHANGED: CAPWAP changed State to ADHERE
* 08:27:27.329 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state CFG
* 08:27:27.333 may 25: % DTLS-5-ALERT: WARNING received: close notify alert from 172.16.100.101
* 25 May 08:27:27.333: % PEER_DISCONNECT-5-DTLS: Peer 172.16.100.101 has closed the connection.
* 08:27:27.333 may 25: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 172.16.100.101:5246
* 08:27:27.377 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY
* 08:27:27.377 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY
* 25 May 08:27:27.377: bsnInitRcbSlot: slot 1 has NO radio
* 08:27:27.433 may 25: % LINK-5-CHANGED: Interface Dot11Radio0, changed state down administratively
* 08:27:27.446 may 25: % PARSER-4-BADCFG: unexpected end of the configuration file.
* 25 May 08:27:27.447: State of the voice_diag_test of WLC is false
* 08:27:27.448 may 25: % LINK-3-UPDOWN: Interface Dot11Radio0, changed State to
* 08:27:27.456 may 25: % LINK-5-CHANGED: Interface Dot11Radio0, changed State to reset
* 08:27:38.000 may 25: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.16.100.101 peer_port: 5246
* 08:27:38.001 may 25: % CAPWAP-5-CHANGED: CAPWAP changed State to
* 08:27:39.183 may 25: % CAPWAP-5-DTLSREQSUCC: DTLS connection created successfully peer_ip: 172.16.100.101 peer_port: 5246
* 08:27:39.184 may 25: % CAPWAP-5-SENDJOIN: send request to join 172.16.100.101
* 08:27:39.184 may 25: % CAPWAP-5-CHANGED: CAPWAP changed State to ADHERE
* 08:27:39.326 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state CFG
* 08:27:39.329 may 25: % DTLS-5-ALERT: WARNING received: close notify alert from 172.16.100.101
* 25 May 08:27:39.329: % PEER_DISCONNECT-5-DTLS: Peer 172.16.100.101 has closed the connection.
* 08:27:39.330 may 25: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 172.16.100.101:5246
* 08:27:39.375 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY
* 08:27:39.375 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY
* 25 May 08:27:39.375: bsnInitRcbSlot: slot 1 has NO radio
* 25 May 08:27:39.446: State of the voice_diag_test of WLC is false
* 08:27:49.000 may 25: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.16.100.101 peer_port: 5246
* 08:27:49.001 may 25: % CAPWAP-5-CHANGED: CAPWAP changed State to
* 08:27:50.179 may 25: % CAPWAP-5-DTLSREQSUCC: DTLS connection created successfully peer_ip: 172.16.100.101 peer_port: 5246
* 08:27:50.180 may 25: % CAPWAP-5-SENDJOIN: send request to join 172.16.100.101
* 08:27:50.180 may 25: % CAPWAP-5-CHANGED: CAPWAP changed State to ADHERE
* 08:27:50.323 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state CFG
* 08:27:50.326 may 25: % DTLS-5-ALERT: WARNING received: close notify alert from 172.16.100.101
* 25 May 08:27:50.326: % PEER_DISCONNECT-5-DTLS: Peer 172.16.100.101 has closed the connection.
* 08:27:50.326 may 25: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 172.16.100.101:5246
* 08:27:50.370 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY
* 08:27:50.370 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY
* 25 May 08:27:50.370: bsnInitRcbSlot: slot 1 has NO radio
* 08:27:50.425 may 25: % LINK-5-CHANGED: Interface Dot11Radio0, changed state down administratively
* 08:27:50.438 may 25: % PARSER-4-BADCFG: unexpected end of the configuration file.
I searched the difference in regulatory areas between AIR-LAP1041N -E- K9 and AIR-LAP1041N -A- K9 and no difference was found which may affect the operation of this access point.to cite our WLC configuration for regulatory areas is:Country set AR codesArea of regulation 802. 11A:-A802.11bg:-aMy question is should I just include my country in the WLC (IQ) add the field of requlatry (-E) to solve this problem? or change the country will affect the operation of all APs workers?Appreciate your kind support,Patrick Q.Try adding a European country to your regulatory domain.
-
Hello
With the help of 11.2.0.3 and have the following code in an attempt to verify the existence of the file.
Directory and file are certainly and user/schema was the allowance all the specfifed directory for them.
Another thing to do?
Wjen, run it says file does not exist - I tried uppare and tiny.
declare
v_file_exists BOOLEAN;
v_file_length NUMBER;
v_block_size NUMBER;
Start
-Create a process to load data to archive
-A process necessary to run on a regular basis to query the datain.txt_finance_gl table. If an error is triggered which shows that the file is not found then it stops and expected to run next time.
-If the data is returned, then the data can be queried and loaded into the table in the archive with the relevant number of sequence and datestamp.
-The txt_load_control will be used to control and verify the transfer.
-The next sequence in the txt_finance_gl_seq number is obtained as well as current datetime object and create a new entry in the control panel (edc_type will be "GL") and give a working state.
-At the end of the load, the flat file will be renamed (pre-fixing on the old name, sequence number) and moved to the processed Finance folder.
-The control panel can then be updated to show the run as it is complete.
-First check to see if the file already exists on the disk in the box provided.
UTL_FILE.fgetattr ('big_tab_data', 'testfile', v_file_exists, v_file_length, v_block_size);
IF v_file_exists THEN
dbms_output.put_line ("'File Exists");
ON THE OTHER
dbms_output.put_line ('file does not exist');
END IF;
end;
user5716448 wrote:
Location was just prove that the oracle schema user can see the directory and database files.
create or replace directory BIP_TAB_DATA
as ' / oracle/finance/export ";
give all the BIP_TAB_DATA of archiving directory;
declare
v_file_exists BOOLEAN;
v_file_length NUMBER;
v_block_size NUMBER;
Start
UTL_FILE.fgetattr ("BIG_TAB_DATA", "samplefile", v_file_exists, v_file_length, v_block_size);
IF v_file_exists THEN
dbms_output.put_line ("'File Exists");
ON THE OTHER
dbms_output.put_line ('file does not exist');
END IF;
end;
[BEEP] / finance/export-oracle $ sqlplus archive / pwd @por.sql
SQL * more: Production release 11.2.0.3.0 the sea Mar 4 16:06:12 2015
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Connected to:
Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production
With partitioning, OLAP, Data Mining and Real Application Testing options
18.
PL/SQL procedure successfully completed.
SQL > set serveroutput on
SQL > /.
File does not exist
PL/SQL procedure successfully completed.
SQL >
[BEEP] / oracle/export/finance $ ls-l
total 1192
-rw-rw-rw-1 orabip s/n 152953 16 Feb 14:42 weekly sales (SAP) .txt
-rw - r - r - 1 orabip s/n 49 Mar 04 13:44 afiedt.buf
-rw-rw-rw-1 orabip s/n 172280 17 February 14:38 new weekly sales (SAP) .txt
-rw - r - r - 1 orabip s/n 374 Mar 04 16:05 por
-rw - r - r - 1 orabip s/n 374 Mar 04 16:07 por.sql
-rw - r - r - 1 orabip s/n 0 Mar 04 16:04 samplefile
-rw-rw-rw-1 orabip s/n 172280 17 February 14:38 sap_weekly_gl_data.txt
-rw - r - r - 1 s/n 55 16 Feb 09:52 testfile.bad orabip
-rw - r - r - 1 orabip s/n 13535 16 Feb 22:00 testfile.log
-rw-rw-rw-1 orabip s/n 42-16 Feb 09:53 testfile.txt
-rw-rw-rw-1 orabip s/n 62908 12 February 16:45 test.txt weekly sales
[BEEP] / oracle/export/finance $
These two are not even!
-
RunInstall does not show the ASM disks
Hello
I googled arleady for so long but I can't find the solution for my problem.
I'm under runInstall of the Oracle Grid Infrastructure installation program. When it comes to "Create the ASM disk groups", the window does not show one of my starts created previously, even if I change the discovery trail to ' / oracleasm/dev/discs / * "Please help!
[dev root@grid1] # / usr/sbin/oracleasm listdisks
DATA01
DATA02
FRA01
FRA02
OCRVOTE01
OCRVOTE02
OCRVOTE03
[dev root@grid1] # / usr/sbin/oracleasm-discover
ASMLib /opt/oracle/extapi/64/asm/orcl/1/libasm.so using
[Library ASM - Generic Linux, version 2.0.4 (KABI_V2)]
Disk discovery: ORCL:DATA01 [31455232 blocks (16105078784 bytes), maxio 512]
Disk discovery: ORCL:DATA02 [31455232 blocks (16105078784 bytes), maxio 512]
Disk discovery: ORCL:FRA01 [20969472 blocks (10736369664 bytes), maxio 512]
Disk discovery: ORCL:FRA02 [20969472 blocks (10736369664 bytes), maxio 512]
Disk discovery: ORCL:OCRVOTE01 [10477194 blocks (5364323328 bytes), maxio 512]
Disk discovery: ORCL:OCRVOTE02 [10483712 blocks (5367660544 bytes), maxio 512]
Disk discovery: ORCL:OCRVOTE03 [10483712 blocks (5367660544 bytes), maxio 512]
[dev root@grid1] # / usr/sbin/oracleasm querydisk DATA01
Disk 'DATA01' is a valid ASM disk
[records root@grid1] # pwd
/ dev/oracleasm/Disks
[records root@grid1] # he's
Total 0
BRW - rw - 1 grid asmadmin 8, 65 4 Mar 11:18 DATA01
BRW - rw - 1 grid asmadmin 8, 81-4 Mar 11:18 DATA02
BRW - rw - 1 grid asmadmin 8, 97-4 Mar 11:18 FRA01
BRW - rw - 1 grid asmadmin 8, 113 4 Mar 11:18 FRA02
BRW - rw - 1 grid asmadmin 8, 17 4 Mar 11:16 OCRVOTE01
BRW - rw - 1 grid asmadmin 8, 33-4 Mar 11:17 OCRVOTE02
BRW - rw - 1 grid asmadmin 8, 49-4 Mar 11:17 OCRVOTE03
[records root@grid1] # rpm - qa | grep oracle
oracleasm-support - 2.1.8 - 1.el6.x86_64
oracleasmlib - 2.0.4 - 1.el6.x86_64
oraclelinux-release-6Server - 6.0.2.x86_64
oraclelinux-release-notes-6Server - 14.x86_64
kmod-oracleasm - 2.0.8 - 4.el6_6.x86_64
Oracle-logos - 60.0.14 - 1.0.2.el6.noarch
to clarify this, please login as user "grid" and run the command
id
This will show you if id is a member of the Group asmadmin.
Martin
-
named pool: ords_al &; ords_rt does not exist
Hello
I'm trying to deploy the new version of Apex listener 2.0.6 now known as Oracle Rest Data Service. Have set up ords.war running
java -jar ords.war
Now, when I run the RESTful in Apex service > SQL Workshop, by clicking on the 'Test' button, the results page fails with a "Not found" error The listener that runs along, displays the message, not found, ords_al & ords_rt.
Mar 26, 2014 3:53:02 PM oracle.dbtools.common.config.db.DatabaseConfig doesNotExist SEVERE: The pool named: ords_al does not exist
As already indicated in the documents of ADR, the three xml files created on top of location for the config folder, apex_al.xml, apex_rt.xml, names will not change with the new ords.war.
So in the meantime, I changed the name of the file apex_al.xml to ords_al.xml & apex_rt.xml to ords.xml.
Kindly help me to find what I may have missed to set up, what is listener looking for 'ADR' named xml files?
Hello Jareeq,
I re configured all steps of setting up of ords.war, but this time, I renamed ords.war in apex.war and followed the same steps. Now the problem is solved, all these three files remain unchanged with apex_rt.xml, apex_al.xml and apex.xml of names.
Thank you
-
Competitor Manager starts but does not work
Hi all
Platform: AIX 5.3
Oracle EBS 11.5.9
9i DB
I have sought a response on this forum and blogs, but he could not understand how to solve this problem.Level APPS, made a backup of tar and restored on another machine (everything is same) but on the new concurrent machine manager does not work but everything else works well.
When you start the application startup script:
applprod@cloapp:/oraapp/prodcomn/Admin/scripts/PROD_cloapp > applications/applications <
You run adcmctl.sh version 115.19
Responsible for simultaneous departure PROD...
Departure PROD_0323@PROD internal competitor Manager
Default printer is noprint
adcmctl.sh: exit with status 0
applprod@cloapp:/oraapp/prodcomn/Admin/scripts/PROD_cloapp >
If I click on the internal log manager, I get the following message:
There is no log file for the process xxxxx. The concurrent Manager may have encountered an error attempting to create the log file
Database alert log watch
Commissioning ORACLE RDBMS Version: 9.2.0.3.0.
Parameters of the system with default values:
_trace_files_public = TRUE
process = 800
sessions = 885
TIMED_STATISTICS = TRUE
shared_pool_size = 301989888
SHARED_POOL_RESERVED_SIZE = 30000000
_shared_pool_reserved_min_alloc = 4100
JAVA_POOL_SIZE = 67108864
enqueue_resources = 32000
nls_language = American
nls_territory = America
nls_sort = binary
NLS_DATE_FORMAT = DD-MON-RR
nls_numeric_characters =.,.
nls_comp = binary
nls_length_semantics = BYTE
control_files = oradata/proddata/cntrl01.dbf, oradata2/data/cntrl02.dbf, /oradata/proddata/cntrl03.dbf
db_block_checksum = TRUE
DB_BLOCK_SIZE = 8192
db_cache_size = 167772160
compatible = 9.2.0
log_buffer = 10485760
log_checkpoint_interval = 100000
log_checkpoint_timeout = 1200
DB_FILES = 512
db_file_multiblock_read_count = 8
log_checkpoints_to_alert = TRUE
dml_locks = 10000
row_locking = always
UNDO_MANAGEMENT = AUTO
undo_tablespace = APPS_UNDOTS1
undo_suppress_errors = FALSE
UNDO_RETENTION = 1800
db_block_checking = FALSE
max_enabled_roles = 100
O7_DICTIONARY_ACCESSIBILITY = TRUE
session_cached_cursors = 200
UTL_FILE_DIR = / usr/tmp, /oratech/proddb/9.2.0/appsutil/outbound/PROD_clodb
JOB_QUEUE_PROCESSES = 2
_system_trig_enabled = TRUE
CURSOR_SHARING = TRUE
parallel_min_servers = 0
PARALLEL_MAX_SERVERS = 8
background_dump_dest = /oratech/proddb/9.2.0/admin/PROD_clodb/bdump
user_dump_dest = /oratech/proddb/9.2.0/admin/PROD_clodb/udump
max_dump_file_size = 20480
core_dump_dest = /oratech/proddb/9.2.0/admin/PROD_clodb/cdump
optimizer_features_enable = 9.2.0
db_name = PROD
open_cursors = 600
iFile = /oratech/proddb/9.2.0/dbs/PROD_clodb_ifile.ora
SQL_Trace = FALSE
_sort_elimination_cost_ratio = 5
_b_tree_bitmap_plans = FALSE
_fast_full_scan_enabled = FALSE
optimizer_max_permutations = 2000
query_rewrite_enabled = true
_index_join_enabled = FALSE
_sqlexec_progression_cost = 2147483647
_like_with_bind_as_equality = TRUE
pga_aggregate_target = 1073741824
workarea_size_policy = AUTO
aq_tm_processes = 1
olap_page_pool_size = 4194304
PMON started with pid = 2
DBW0 started with pid = 3
LGWR started with pid = 4
CKPT started with pid = 5
SMON started with pid = 6
RECCE has started with pid = 7
CJQ0 started with pid = 8
QMN0 started with pid = 9
Sun Mar 23 18:10:09 2014
ALTER DATABASE MOUNT
Sun Mar 23 18:10:13 2014
Mount of redo thread 1, with mount id 254776577.
Sun Mar 23 18:10:13 2014
Database mounted in exclusive Mode.
Completed: ALTER DATABASE MOUNT
Sun Mar 23 18:10:13 2014
ALTER DATABASE OPEN
Sun Mar 23 18:10:15 2014
Thread 1 is open to the sequence of journal 9194
Currently Journal # 2 seq # 9194 mem # 0: /oradata/proddata/log02a.dbf
Currently Journal # 2 seq # 9194 mem # 1: /orada
Where should I start in order to solve this problem.
I don't know why are you fndsm missing entry tns. AutoConfig should have created the tnsnames.ora with this entry.
Assuming that the architecture you have is
clodb - only db level
cloapp - applications (cm, forms, apache)
1. check if you have the correct entry for FNDSM_CLOAPP_PROD tns in tnsnames.ora on the application tier
2. make sure that apps listener is running
If it does not, the cleaner way than it would be to:
1. stop all application services
2. run exec fnd_conc_clone.setup_clean (); only applications
3. run autoconfig on dbtier
4. run autoconfig on level apps
Check fnd_nodes, you should have entries for the nodes and the check tnsnames.ora, should have entered correct tns.
5 start services.
Thank you
Shakti
-
Insertion in the declaration does not work with the DATE
I'm trying to run a script on 11 g express edition, and tables are created very well, but the records are not placed correctly. Any folder with a date in the field of the hire_date is not inserted. The field is of type DATE.
This is the beginning of the script.
Any ideas why it does not work?
-- CREATE THE L_EMPLOYEES TABLE CREATE TABLE L_EMPLOYEES (EMPLOYEE_ID NUMBER(3), FIRST_NAME VARCHAR2(10), LAST_NAME VARCHAR2(20), DEPT_CODE VARCHAR2(3), HIRE_DATE DATE, CREDIT_LIMIT NUMBER(4,2), PHONE_NUMBER VARCHAR2(4), MANAGER_ID NUMBER(3)); ALTER TABLE L_EMPLOYEES ADD CONSTRAINT PK_L_EMPLOYEES PRIMARY KEY (EMPLOYEE_ID); INSERT INTO L_EMPLOYEES VALUES (201, 'SUSAN', 'BROWN', 'EXE', '01-JUN-1998', 30, '3484', NULL); INSERT INTO L_EMPLOYEES VALUES (202, 'JIM', 'KERN', 'SAL', '16-AUG-1999', 25, '8722', 201); INSERT INTO L_EMPLOYEES VALUES (203, 'MARTHA', 'WOODS', 'SHP', '02-FEB-2009', 25, '7591', 201); INSERT INTO L_EMPLOYEES VALUES (204, 'ELLEN', 'OWENS', 'SAL', '01-JUL-2008', 15, '6830', 202); INSERT INTO L_EMPLOYEES VALUES (205, 'HENRY', 'PERKINS', 'SAL', '01-MAR-2006', 25, '5286', 202); INSERT INTO L_EMPLOYEES VALUES (206, 'CAROL', 'ROSE', 'ACT', NULL, NULL, NULL, NULL); INSERT INTO L_EMPLOYEES VALUES (207, 'DAN', 'SMITH', 'SHP', '01-DEC-2008', 25, '2259', 203); INSERT INTO L_EMPLOYEES VALUES (208, 'FRED', 'CAMPBELL', 'SHP', '01-APR-2008', 25, '1752', 203); INSERT INTO L_EMPLOYEES VALUES (209, 'PAULA', 'JACOBS', 'MKT', '17-MAR-1999', 15, '3357', 201); INSERT INTO L_EMPLOYEES VALUES (210, 'NANCY', 'HOFFMAN', 'SAL', '16-FEB-2007', 25, '2974', 203); COMMIT;
(or)
Check the nls_date_format by using the following query
Select the parameter, the value from v$ nls_parameters where parameter = "NLS_DATE_FORMAT.
output:
VALUE OF THE PARAMETER
-----------------------------------------------------
NLS_DATE_FORMAT JJ-LUN-AA
Based on the value above, you have to make a contribution.
Maybe you are looking for
-
Thunderbird hangs when it is looking for a temporary directories on C:
Grateful for your help? I'm migrating from Outlook 2010 to Thunderbird. When I import the Thunderbird emails it crashes when it is looking for a temporary directories on the C: partition. Note the C: partition is limited to 30G and PST file is very w
-
How can I clean my Apple pencil tip is smooth
I have no idea, I want to make mine smooth for painting and drawing that I just ordered some that I wonder if I can perhaps use a cleaning product on the tip replacement on mine is already exhausted. IM do not receive delivery until Monday asked. If
-
USB ports all failure Tecra S1
Hello my old Tecra S1 video card died last week and I managed to find an another identical Tecra S1 very cheap.I swapped my portable hard drive in the new computer and everything works fine apart from any of the USB ports work.Food sent to external d
-
HP Pavilion 15 laptop: The laptop has been shutdown automatically
Hello! I've been using this laptop for almost a year now and it has never happened before with me. While I was working on the laptop, it stopped all of a sudden. Any order of work which includes the display, the light power, HDD witness, all but fan
-
Ive got an acquisition of data USB-6211 (and LabView 2009) and Im trying to get the output (5v) device to run a relay on and outside. IM using a tutorial I found on Internet to make the diagram Labview (http://www.pages.drexel.edu/~pyo22/mem639/lab-u