Solitaire T please help! Update of El Capitan: Bootcamp does not start

Similar Questions

• After updating Windows twitter blackBerry smartphones does not start

  I downloaded the version 2.0.0.11, and the application does not start.
  Could you help me? Thank you
  Rodrigo

  Do a simple reboot on the BlackBerry this way:

  With the BlackBerry powereddevice, remove the battery for a minute and then reinsert the battery to restart. A reboot in this way is prescirbed for most the gltiches and operating system errors, and you will lose any data on the device doing so.

  Now, please try again on Twitter.

  Even if you already have, please try again.

• Satellite L300 - 20 d - after updating the BIOS, that it does not start now

  Hello

  I bought my wife a Toshiba L300 - 20 d (PSLB8E-0CK00YEN). It came with loaded Vista, which it cannot do.

  My grandson offered also to sort. He has installed a new hard drive, loaded with XP and managed to get almost all the drivers working except the WiFi.

  After spending many hours, he decided to update the bios of v1.8 to v1.9. Since it does not start... It happens with the Toshba screen, start windows normally, then it attempts to load windows, flashing and start the cycle al.

  He has tried default settings, tried a XP disk, setting on the disk, nothing. He just does the same thing in safe mode.

  Any suggestions will be appreciated

  Concerning

  Keith

  Hello

  The wireless network card is enabled with the hardware switch on the computer laptop and FN + F8? Check this box!

  Additionally, make sure that the latest driver on the Toshiba site is installed, and check the settings of the wireless network adapter TCP/IP.

  Moreover a description that is more accurate than the WiFi works not would be very appreciated.

  Good bye

• Updated extensions Webcenter and JDev does not start the server... Help, please

  Hi all

  I installed the JDeveloper 11.1.1.6 version on my laptop with windows 7 64-bit OS. It worked very well with applications I've built on ADF. However, when I updated the Webcenter extensions with help-> check the JDeveloper IDE updates, and once the update is finished, I rebooted the JDev. But after restarting of JDev, ADF applications no longer work. Infact, the server does not even start. It gives me the following error:

  java.lang.NoClassDefFoundError: v11, 1, 1, 6\jdeveloper

  Caused by: java.lang.ClassNotFoundException: v11.1.1.6\jdeveloper

  in java.net.URLClassLoader$ 1.run(URLClassLoader.java:202)

  at java.security.AccessController.doPrivileged (Native Method)

  at java.net.URLClassLoader.findClass(URLClassLoader.java:190)

  at java.lang.ClassLoader.loadClass(ClassLoader.java:305)

  to Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (Launcher.java:301)

  at java.lang.ClassLoader.loadClass(ClassLoader.java:246)

  The main class is not found: v11.1.1.6\jdeveloper.  Program ends.

  Exception in thread "main" process is completed.

  Here, I put the whole journal which proved when I tried to start the JDeveloper Server (integrated Weblogic Server).

  [Waiting for the field to complete the construction...]

  [10: 26:44] integrated Weblogic domain Extension...

  [10: 27:26] integrated Weblogic domain completed successfully.

  Using the 7101 port *.

  C:\Users\Mahesh\AppData\Roaming\JDeveloper\system11.1.1.6.38.62.29\DefaultDomain\bin\startWebLogic.cmd

  [waiting for the server to complete its initialization...]

  .

  .

  Arguments of memory in JAVA: - Xms256m-Xmx512m - XX: CompileThreshold = 8000 - XX: PermSize = 128 m - XX: MaxPermSize = 512 m

  .

  Start mode of WLS = development

  .

  CLASSPATH=C:\Oracle\MIDDLE~1.6\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar; C:\Oracle\MIDDLE~1.6\patch_wls1035\profiles\default\sys_manifest_classpath\weblogic_patch.jar; C:\Oracle\MIDDLE~1.6\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar; C:\Oracle\MIDDLE~1.6\JDK160~1\lib\tools.jar; C:\Oracle\MIDDLE~1.6\WLSERV~1.3\server\lib\weblogic_sp.jar; C:\Oracle\MIDDLE~1.6\WLSERV~1.3\server\lib\weblogic.jar; C:\Oracle\MIDDLE~1.6\modules\features\weblogic. Server.modules_10.3.5.0.jar; C:\Oracle\MIDDLE~1.6\WLSERV~1.3\server\lib\webservices.jar; C:\Oracle\MIDDLE~1.6\modules\ORGAPA~1.1/lib/Ant-all.jar; C:\Oracle\MIDDLE~1.6\modules\NETSFA~1.0_1/lib/Ant-contrib.jar; C:\Users\Mahesh\AppData\Roaming\JDEVEL~1\SYSTEM~1.29\DEFAUL~1\wcps-lib\derby-10.6.1.0.jar; C:\Users\Mahesh\AppData\Roaming\JDEVEL~1\SYSTEM~1.29\DEFAUL~1\wcps-lib\derbytools-10.6.1.0.jar; C:\Oracle\Middleware v11.1.1.6\jdeveloper\webcenter\modules\oracle.portlet.server_11.1.1\oracle-portlet-api.jar; C:\Oracle\Middleware v11.1.1.6\jdeveloper\webcenter\modules\wcps_11.1.1.4.0\wcps-connection-mbeans.jar; C:\Oracle\MIDDLE~1.6\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar; C:\Oracle\MIDDLE~1.6\WLSERV~1.3\common\derby\lib\derbyclient.jar; C:\Oracle\MIDDLE~1.6\WLSERV~1.3\server\lib\xqrl.jar

  .

  PATH=C:\Oracle\MIDDLE~1.6\patch_wls1035\profiles\default\native; C:\Oracle\MIDDLE~1.6\patch_jdev1111\profiles\default\native; C:\Oracle\MIDDLE~1.6\WLSERV~1.3\server\native\win\32; C:\Oracle\MIDDLE~1.6\WLSERV~1.3\server\bin; C:\Oracle\MIDDLE~1.6\modules\ORGAPA~1.1\Bin; C:\Oracle\MIDDLE~1.6\JDK160~1\jre\bin; C:\Oracle\MIDDLE~1.6\JDK160~1\Bin; C:\app\Mahesh\product\11.2.0\dbhome_1\bin; C:\oraclexe\app\oracle\product\10.2.0\server\bin; C:\Program Files (x 86) \Intel\iCLS Client\; C:\Program Files\Intel\iCLS Client\. C:\Program Files\Common Files\Microsoft Shared live; C:\Program Files (x 86) \Common Files\Microsoft Shared live; C:\Windows\System32; C:\Windows; C:\Windows\System32\Wbem; C:\Windows\system32\WindowsPowerShell\v1.0\; C:\Program Files (x 86) \Common Files\Roxio Shared\DLLShared\; C:\Program Files (x 86) \Common Files\Roxio Shared\OEM\DLLShared\; C:\Program Files (x 86) \Common Files\Roxio Shared\OEM\DLLShared\; C:\Program Files (x 86) \Common Files\Roxio Shared\OEM\12.0\DLLShared\; C:\Program Files (x 86) \Roxio\OEM\AudioCore\; C:\Program Files (x 86) \Windows Live\Shared; C:\Program Dell Data Protection\Access\Advanced\Wave\Gemalto\Access Client\v5\; C:\Program Files (x 86) \NTRU Cryptosystems\NTRU TCG Software Stack\bin\; C:\Program Files\NTRU Cryptosystems\NTRU TCG Software Stack\bin\; C:\Program Files\Intel\Intel (R) engine management Components\DAL; C:\Program Files\Intel\Intel (R) engine management Components\IPT; C:\Program Files (x 86) \Intel\Intel(R) Components\DAL to engine management; C:\Program Files (x 86) \Intel\Intel (R) management engine Components\IPT; C:\Oracle\MIDDLE~1.6\WLSERV~1.3\server\native\win\32\oci920_8

  .

  ***************************************************

  * To start WebLogic Server, use a username and *.

  * password assigned to an administrator-level user.  For *.

  * server administration, using the WebLogic Server *.

  * the http://hostname:port\console console *.

  ***************************************************

  from weblogic with the Java version:

  Java version "1.6.0_24".

  Java (TM) SE Runtime Environment (build 1.6.0_24 - b50)

  Java Client VM (build 19.1 - b02, mixed mode)

  WLS starting with line:

  C:\Oracle\MIDDLE~1.6\JDK160~1\bin\java-client-Xms256m-Xmx512m - XX : CompileThreshold = 8000 - XX : PermSize = 128m - XX : MaxPermSize = 512m-Dweblogic.Name=DefaultServer-Djava.security.policy=C:\Oracle\MIDDLE~1.6\WLSERV~1.3\server\lib\weblogic.policy «-Djavax.net.ssl.trustStore=C:\Oracle\Middleware v11.1.1.6\wlserver_10.3\server\lib\DemoTrust.jks »-Dweblogic.nodemanager.ServiceEnabled=true - Xverify : aucun-da-Dplatform.home=C:\Oracle\MIDDLE~1.6\WLSERV~1.3-Dwls.home=C:\Oracle\MIDDLE~1.6\WLSERV~1.3\server-Dweblogic.home=C:\Oracle\MIDDLE~1.6\WLSERV~1.3\server-Djps.app.credential.overwrite.allowed=true-Dcommon.components.home=C:\Oracle\MIDDLE~1.6\ORACLE~1-Djrf.version= 11.1.1 - Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger-Ddomain.home=C:\Users\Mahesh\AppData\Roaming\JDEVEL~1\ SYSTEM~1.29\DEFAUL~1-Djrockit.optfile=C:\Oracle\MIDDLE~1.6\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt-Doracle.server.config.dir=C:\Users\Mahesh\AppData\Roaming\JDEVEL~1\SYSTEM~1.29\DEFAUL~1\config\FMWCON~1\servers\DefaultServer-Doracle.domain.config.dir=C:\Users\Mahesh\AppData\Roaming\JDEVEL~1\SYSTEM~1.29\DEFAUL~1\config\FMWCON~1-Digf.arisidbeans.carmlloc=C:\Users\Mahesh\AppData\Roaming\JDEVEL~1\SYSTEM~1.29\DEFAUL~1\config\FMWCON~1\carml-Digf.arisidstack.home=C:\Users\Mahesh\AppData\ Roaming\JDEVEL~1\SYSTEM~1.29\DEFAUL~1\config\FMWCON~1\arisidprovider-Doracle.security.jps.config=C:\Users\Mahesh\ AppData\Roaming\JDEVEL~1\SYSTEM~1.29\DEFAUL~1\config\fmwconfig\jps-config.xml-Doracle.deployed.app.dir=C:\Users\Mahesh\AppData\Roaming\JDEVEL~1\SYSTEM~1.29\DEFAUL~1\servers\DefaultServer\tmp\_WL_user-Doracle.deployed.app.ext=\--Dweblogic.alternateTypesDirectory=C:\Oracle\MIDDLE~1.6\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Oracle\MIDDLE~1.6\ORACLE~1\modules\oracle.oamprovider_11.1.1-Djava.protocol.handler.pkgs=oracle.mds.net.protocol-Dweblogic.jdbc.remoteEnabled=false-Dwsm.repository.path=C:\Users\Mahesh\AppData\Roaming\JDEVEL~1\SYSTEM~1.29\DEFAUL~1\oracle\ store\gmds-DUSE_JAAS = faux - Djps.policystore.hybrid.mode=false-Djps.combiner.optimize.lazyeval=true-Djps.combiner.optimize=true-Djps.auth=ACC-Doracle.core.ojdl.logging.usercontextprovider=oracle.core.ojdl.logging.impl.UserContextImpl - noverify-Doracle.webcenter.analytics.disable-native-partitionnement = faux - Doracle.webcenter.tagging.scopeTags=false - XX : + UseParallelGC - XX : + DisableExplicitGC-Dportlet.oracle.home=C:\Oracle\Middleware v11.1.1.6\jdeveloper-Dwc.oracle.home=C:\Oracle\Middleware v11.1.1.6\jdeveloper-Dweblogic.management.discover=true-Dwlw.iterativeDev=-Dwlw.testConsole=-Dwlw.logErrorsToConsole=-Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1.6\patch_wls1035\profiles\default\sysext_manifest_classpath ; C:\Oracle\MIDDLE~1.6\patch_jdev1111\profiles\default\sysext_manifest_classpath weblogic. Server

  java.lang.NoClassDefFoundError: v11, 1, 1, 6\jdeveloper

  Caused by: java.lang.ClassNotFoundException: v11.1.1.6\jdeveloper

  in java.net.URLClassLoader$ 1.run(URLClassLoader.java:202)

  at java.security.AccessController.doPrivileged (Native Method)

  at java.net.URLClassLoader.findClass(URLClassLoader.java:190)

  at java.lang.ClassLoader.loadClass(ClassLoader.java:305)

  to Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (Launcher.java:301)

  at java.lang.ClassLoader.loadClass(ClassLoader.java:246)

  The main class is not found: v11.1.1.6\jdeveloper.  Program ends.

  Exception in thread "main" process is completed.

  Could someone help me please in this regard. I am stuck and had to reinstall JDev, not being able to solve this problem.

  Sincerely,

  Mahesh.

  Mahesh,

  JDeveloper almost always has problems when the installation folder path contains spaces. For example, your way "C:\Oracle\Middleware v11.1.1.6\".

  I suggest that you reinstall JDeveloper in a path without spaces. You may be able to get away with just rename the folder "Middleware_v11.1.1.6".

• My app store and some other applications not re-downloadable are a question mark and are not in my file programs, Please HELP IVE TRIED EVERYTHING! GarageBand does not open, there was a question mark through the icon, restart comp, all the question marks

  I opened my garageband, but I does not, because there was a question mark hollow garageband icon, then I restarted the computer, it normally restarted (whithout saying I restarted the computer because of a problem), and when it was made of built-in apps were question marks, were not in the program and "it is not found on the computer.

  Please help even the app store is broken and he asked me if I would choose a program from the app store when I tried to re - download from the internet, said yes and it did not work. Help, please

  The? means that the location for the file specified in the Dock cannot be found.

  You said "were not in the programs.

  Did you mean that they are not located in the Applications folder? Windows has a record of programs, not OSX.

  You said "when I tried to re - download from the internet, said yes and it did not work."?

  What happened when you tried?

  The missing applications are in the purchase of the Mac App Store section?

• Please help about the FRM-47023 - parameter does not exist in form

  Dear all,
  
  Best wishes...
  
  I'm currently doing some additions to existing forms.
  
  in fact, I have two forms, form and b. (form A) based on the tables and B form based on table B
  
  Existing scenario.
  
  Formula A-> table A contains the columns as
  
  A1Col1 - Primary key
  A1Col2 - Primary key
  A1Col3 - Primary key
  A1Col4 - Primay key
  A1Col5
  A1Col6
  
  Form B-> table B
  
  B1Col1 = A1Col1
  B1Col2 = A1Col2
  B1Col3 = A1Col3
  B1Col4 = B1Col4 (this is newly added column in TableB and form present I do not have this relationship, so I
  Add an element of text in form B and made it point to databases and give the coloumn name)
  B1Col5
  B1Col6
  
  
  Existing features:
  
  Form A is the main form and there is a button pressed, it will pass (A1Col1 parameters
  A1Col2, A1Col3 to the B shape based on what form B will ask details.
  
  Existing for this push in FormA button code is:
  

  DECLARE
  
    pl_id   ParamList;
  
    pl_name VARCHAR2(15) := 'ls_parm_list';
  
  BEGIN
  
    if :TableA.A1Col1 > ' ' and
  
       :TableA.A1Col2 > ' '   and
  
       :TableA.A1Col3 > ' '    and
  
       :TableA.A1Col4 > ' '     then (-- (newly added line for current requirement)
  
  
  
        pl_id := Get_Parameter_List(pl_name);
  
   
  
        if NOT Id_Null(pl_id) then 
  
            Destroy_Parameter_List(pl_id);
  
        end if;
  
  
  
        pl_id := Create_Parameter_List(pl_name);
  
  
  
        Add_Parameter(pl_id,'A1Col1',TEXT_PARAMETER,:TableA.A1Col1);
  
        Add_Parameter(pl_id,'A1Col2',TEXT_PARAMETER,:TableA.A1Col2);
  
        Add_Parameter(pl_id,'A1Col3',TEXT_PARAMETER,:TableA.A1Col4);
  
        Add_Parameter(pl_id,'A1Col4',TEXT_PARAMETER,:TableA.A1Col3); -- (newly added line for current requirement)
  
        Add_Parameter(pl_id,'A1Col5',TEXT_PARAMETER,:PARAMETER.UID);
  
  
  
        NEW_FORM('FormB',TO_SAVEPOINT,NO_QUERY_ONLY,pl_id);
  
    end if;
  
  END;

  Code for the new instance of the form to FormB:
  

  DECLARE
  
    W_WHERE VARCHAR2(100);
  
  BEGIN
  
    if :PARAMETER.Param1 > ' ' then 
  
        W_WHERE := 'B1col1=''' || :PARAMETER.param1 || ''' AND B1col2=''' || :PARAMETER.param3 || ''' AND B1col3 =''' || :PARAMETER.param4 || ''' AND B1col4=''' || :PARAMETER.Param4 || '''';
  
  
  
        Set_Block_Property('TableB',DEFAULT_WHERE,W_WHERE);
  
  
  
        execute_query;
  
  
  
        Set_Block_Property('TableB',DEFAULT_WHERE,'');
  
    end if;
  
  
  
    :SYSTEM.MESSAGE_LEVEL := 25;
  
  END;

  So now,.
  
  New features:
  
  I need to spend an additional column in TableA (A1Col4) also a parameter to form B so that it will be in the where clause of the form B.
  
  To achieve this requirment,
  
  Step 1:
  
  Step 1: I added B1Col4 to TableB because it did not exist before.
  
  Step 2: I added a text element in FormB, named as "A1Col4" and set its property to iterm Yes to Database and columname to A1Col4.
  
  And then I created a setting called "' A1Col4" to FormB (this iis since I added a new setting FormA pressed button code above)... ".
  
  Now, the real problem I am facing:
  
  I have compiled the forms, and it went well... I ran the FormA... Here are the scenarios:
  
  1. formA is running and when I run the query, it performs gets data, when press the button go form B (to all 4 parameters to formb, I get error. FRM 47023 No. such parameter named A1col4 exists in FormB. even though I have the parameter b form created recently with this name.
  
  2. so I just kept the existing code button pressed (commented on newly added lines, keeping the 3 parameters instead of 4) and removed "' AND B1col4 =" ' | : PARAMETER. Param4 | "' from the whennewform code instance formb, the result is: FormA call FormsB successfully, FormB is to be opened, BUT VERY STRANGE, THAT NEWLY ADDED POINT (COLUMN TABLEB THAT I wanted TO PASS ADDITIONAL PARAMETER FROM FORM 'A') IS MISSING. This text element appears not.
  
  
  3. If I run FormB alone, then it is querying data, the newly added text element is also displayed but if if I have the same call FormA, error FRM-47023.
  
  I sat for hours and hours to find out what exactly the problem... but no clue...
  
  Sorry for the long post... but in hope and who seek the help of our friends from the OTN network...
  
  Hope that I have explained clearly the problem... By the way that the version is 10G forms.
  
  Thanks for the help in advance for everyone...
  
  Kind regards
  Prasanth

  they are in the same folder

  If you're on 10G, being in the same folder does not mean automatically that the forms be made on this issue. In your EPS file, there is a parameter named FORMS_PATH, forms are searched for in directories listed there. To verify your env file. also, you could search the entire disk by issuing a

  dir formb.fmx /s
  

  from the root directory of your disks.

• Update to the current Version does not start.

  I just bought today CC and im only able to install older Versions of the CC Applications Photoshop, Illustrator, bridge base.

  With the exception of InDesign, it worked.

  When I hit the button "Update", I get an error message indicating that installation could not be completed. "

  If I click on 'Further information', I get the following message:

  Exit code: 105

  -------------------------------------- Summary --------------------------------------

  -1 fatal Error (s), 0 error (s), 0 warning (s)

  FATAL error: Could not open the PIM database.

  -------------------------------------------------------------------------------------

  I'm working on a 27 "Mac, end 2012, El Capitan OS

  Please help me!

  Hi Ulrichf66892407,

  My apologies for the delay in response, in reference to your post in the thread: Re: cannot download Photoshop - error 105 I just wanted to confirm if you have already performed the steps in troubleshooting as mentioned in this thread as well as basic troubleshooting steps that you mentioned above.

  Waiting for your response.

• After the updates of Windows 7 computer does not start

  I received a notice from the system Windows 7 updates have been downloaded and available for installation. I selected the installation of updates. After the updates when installed I was in charge to restart. The computer will not start at the top. It tries but stops at a blue screen with a cursor. I tried to boot into "safe mode" and get the same. I booted from my original Windows 7 disc and I went back to my restore point before the update. It appeared to restore successfully but I still get a blue screen.
  What is my next course of action? I certainly DON'T want to format the drive and start again.

  The only thing I can say is that I know that you will not like to hear.

  It is to re - install Windows 7 (do not enter the product key and uncheck the 'Activation').

  Then immediately turn off automatic updates.

  Then, go to the Microsoft Update site and only install one update at a time (make a note of the number KBXXXXXX), restart and check that you do not get the blue screen. Then download the next update and repeat the process until you either find to have installed the offending update or updates without any problem. If all goes well and the problem did not repeat, then you can activate Windows.

  If you find yourself always with the blue screen after a given Update call Microsoft and tell them. If they won't listen, then create a new post on this forum, making reference to the question of the blue screen AND the number associated with the update. Also post the number here if I can do some research on the problem.

  JS
  http://www.PAGESTART.com
  Never be afraid to ask. This forum has some of the best people in the world to help.

• Windows 8 for Windows xp update fails at 90% and does not start.

  I read the below and see if there are solutions.

  I paid for 1 hour to help Microsoft Tech to take on my desktop computer and at the end

  He said there are so many chat lines, he could not follow after clicking on install.

  He beat anything, antivirus, I disconnected all devices except the mouse and keyboard.

  Of course the update, which I downloaded and confirmed with their diagnosis that the

  computer has been updated failed 90% and would not restart.

  When I went to system logs, I even tried to disable restore.

  Nothing helps.

  I think there must be something which is not allow restarting after installation.

  The message just says: failed to install. No diagnosis or whatever it is.

  If a Microsoft technology, which grabbed my computer couldn't do work I'm close to trying to get

  my money back and stopped a complete package. I don't have to Microsoft backup disk, which
  I'll try again.

  Once again: problem is installation of Windows 8 reaches 90% and then only will fail.

  ... Install only Windows 8 reaches 90% and then fails.

  Windows Update has nothing to do with the upgrade a Windows XP-based computer or install Windows 8 (.1).

  Please post future questions about the installation of Windows 8 in this forum-online http://answers.microsoft.com/en-us/windows/forum/windows_8-windows_install

  If you try to install Windows 8.1, post your questions in this forum-online http://answers.microsoft.com/en-us/windows/forum/windows8_1-windows_install

  Good luck!

• Updated vCenter, now SRM service does not start.

  We have put SRM implementation.  We have vcenter, SRM servers on separate boxes.  We have updated our vcenter since version 4.0 to 4 Update 1 servers.  Somewhere in there the VMwarevCenter Site Recovery Manager Server service has stopped.  Now, when we try to start it, it starts and stops again.  Any help would be greatly appreciated.

  In the face of problems always get your eyes on the newspapers.  I just go to the start menu for 'generate the site recovery manager newspaper bundle' or something like that...  Try to start your service, newspapers will turn, generate a bundle and after the last log.  The most common cause for this problem is a lack of database connectivity, but it could really be a lot of things.  Let's see these newspapers!

  Tim Oudin

• Dv6105us upgraded to windows 7. Win7 all updates installed. Wireless button does not start wireless

  Hi all.  Looks like I'm not the first with the upgrade of OS wireless doesn't work do not. I think I'm the first in this forum w houpgraded to Windows 7.

  Is there a workaround procedural?  I couldn't networking controls for wireless at all the options.

  I'm OK replace networking if it is an option.  Thank you.  Lucette

  Ok. I'll give you upwards.  Thank you very much for your advice.  Without it, I probably keep home and lose even more time.

  I have no ability to mark my closed issue.  Can we "heavies" brand it closed for me?

• recently I formatted my windows XP PC. after update to show that it does not allow the genuine.but when I brought it was authentic. I have the product key with me.Please,help help find the solution

  recently I formatted my windows XP PC. after update to show that it does not allow the genuine.but when I brought it was authentic. I have the product key with me.Please,help help find the solution

  Please visit http://www.microsoft.com/genuine/ and click the Validate Windows button, then restart your computer.

  If you were not able to validate, follow these steps:

  1. Download this diagnostic tool, save it to your desktop: http://go.microsoft.com/fwlink/?linkid=56062

  1B. double-click the executable file to run the tool.

  2. after running the tool, click the Windows tab, and then click copy in the Clipboard.

  NB: You can open a new file in Notepad, paste the contents of the Clipboard in it & keep for future reference.

  3 start a new thread in the following forum and paste the results of the WGA diagnostic data in a post detailing the problem: http://social.microsoft.com/Forums/en-US/genuinewindowsxp/threads

  4 Troubleshooting specialist will analyze the data and recommend an appropriate solution.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Impossible says windows error 80070641 please help update

  Impossible says windows error 80070641 please help update

  I suggest you follow the steps in the link below and check if it helps:

  How to resolve problems connecting to Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/818018/en-us>

  04/21 / 1110:44: 23 pm

• MacBook does not start without warning, please help I'm losing my mind

  MacBook pro froze performs a simple operation. Got the wheel turns and could not enter the finder, etc. Did a hard reboot. Now the computer does not start. I get the apple journal and the bar for a minute or two and then a zero symbol IE forbidden - a circle with a line through it.

  Surprisingly, it is less than two months after a similar disaster where the computer would not suddenly start. In this case, I was able to get repaired the program apple logic board (the problem was compatible with the congenital fail GPU result).

  Incredibly this time the macbook seems to be in even worse shape. I don't get anything useful from the startup keys.

  cmd R - take me in a gray screen no symbol

  D - no symbol grey screen

  option D - it took a while but eventually I got to choose the network, then it seemed to freeze on the globe

  option - strangely this brings me to a screen asking me to choose the wireless network, but it does not all networks in the box. weird - this happens even with a simple bootable usb key

  option cmd R - annoys me to the world, but the world does not revolve

  T - puts me the screen of the target disk, but the disk is unreadable from another computer

  cmd S / cmd V - gives me a code screen and then freezes

  Shift - takes me to zero cross again

  C - think for awhile, but let me on an undefined gray screen

  (I need some advice on the start-up of the thumb. Pressing C should force the startup of the thumb. I did an inch bootable with el capitan. However, I am not convinced that my thumb works on a functional mac either - I just can't get a macbook functional 2009 to start the boost by pressing C, although it starts from the thumb if I press option and go through the menu. Weird.)

  Help, please. Urgent need to use the computer and access the data on it.

  Even if you have just a few ideas that would be useful.

  Can I assume that you have a 2009 MBP?

  You have your data backed up?

  Have you tried SMC and NVRAM resets?

  https://support.Apple.com/en-us/HT201295

  https://support.Apple.com/en-us/HT204063

  Have you tried a secure boot?

  https://support.Apple.com/en-us/HT201262

  Take our installation disc and use the one with the Apple Hardware Test instructions on it and run the original test.

  Note that an error free AHT is inconclusive.

  Ciao

• iMovie does not start! Please help me...

  Hello

  iMovie 10 does not start when I run the application it!

  iMovie start for a few seconds, trying to backup previous library and then crash...

  Please help me because I don't want to lose all my projects!

  Thank you for the support.

  Cheers to the Italy.

  Here's the message log:

  25/07/16 20:38:19, iMovie 957 [4230]: warning: the selector Gestalt gestaltSystemVersion returns 10.9.6 instead of 10.11.6. This isn't a bug in Gestalt - it is a documented restriction. The NSProcessInfo operatingSystemVersion property to get the correct version number of system.

  Location of the call:

  25/07/16 20:38:19, iMovie 958 [4230]: 0 0x00007fff938d76df ___Gestalt_SystemVersion_block_invoke + 113 CarbonCore

  25/07/16 20:38:19, iMovie 958 [4230]: 1 libdispatch.dylib 0x00007fff892a140b _dispatch_client_callout + 8

  25/07/16 20:38:19, iMovie 958 [4230]: 2 libdispatch.dylib 0x00007fff892a1303 dispatch_once_f + 67

  25/07/16 20:38:19, iMovie 958 [4230]: 3 0x00007fff93863fbc _Gestalt_SystemVersion + 987 CarbonCore

  25/07/16 20:38:19, iMovie 958 [4230]: 4 CarbonCore 0x00007fff938637d0 Gestalt + 139

  25/07/16 20:38:19, iMovie 958 [4230]: AVCHD 5 0x000000012ca6402d _ZN13FDVDProcessor12FCDVDManagerC2Ev + 141

  25/07/16 20:38:19, iMovie 958 [4230]: AVCHD 6 0x000000012ca69ab7 _ZN13FDVDProcessor12FCDVDManager13GetDVDManagerEhhPFvvE + 87

  25/07/16 20:38:36, iMovie 015 [4230]: ERROR: could not allocate class object (null) - return nil (file: /Library/Caches/com.apple.xbs/Sources/DeepSkyLite/DeepSkyLite-28072.7.78/Framew ork/DSBridge.mm, line: 7612)

  25/07/16 20:38:36, 078 diagnosticd [127]: error assessment process info - pid: 4230, puniqueid: 4230

  25/07/16 20:38:36, 080 InternalFiltersXPC [4231]: host connection < NSXPCConnection: 0x7f85b350f2a0 > invalidated connection from pid 4230

  25/07/16 20:38:36, com.apple.xpc.launchd [1 114]: (com.apple.iMovieApp.64352 [4230]) Service was released due to the signal: Abort trap: 6

  25/07/16 20:38:36, com.apple.xpc.launchd [1 143]: (com.apple.ReportCrash [4236]) endpoint has been activated through legacy launch (3) API. Please go to XPC or bootstrap_check_in(): com.apple.ReportCrash

  25/07/16 20:38:38, ReportCrash 831 [4236]: report of incidents recorded for iMovie [4230] version 10.1.2 (283259) to Users/iMaclittlegiop/Library/Logs/DiagnosticReports/iMovie_2016-07-25-203838_i Mac-Littlegiop - Home.crash

  25/07/16 20:38:38, 889 ReportCrash [4236]: AutoSubmitPreference is 0

  25/07/16 20:38:39, UserNotificationCenter 012 [4238]: * ATTENTION: the method in the class userSpaceScaleFactor NSWindow is discouraged on 10.7 and later versions. It should not be used in new applications. Use convertRectToBacking: instead.

  Launch iMovie by holding down the option key and see if you can create a new library. If Yes, then add clips to the timeline and see if iMovie works ok.