CS3 FTP Issues in XPSP2

Similar Questions

• DW CS3 FTP Upload glitch

  I tried to find a solution to this particular problem, but don't see anything in the archives, and the problem I'm running into is this: I work at a client site (today), and Dreamweaver CS3 is to launch the "an FTP error occurred - cannot put ___.html.» Access denied. The file exists may not, or there could be a permission problem. Make sure you have permission on the server and the server is properly configured. "error.
  I was able to download files from all week, and I can always get / download files, as well as see what is on the server in remote mode. I can delete files via the remote display and test connection in the settings of the site works very well. I've tried turning on and toggleing 'use passive FTP mode' and that did not help. The server still accepts the downloads FTP site webcam, so I'm sure it's a problem in Dreamweaver.
  Any advice would be most useful.

  I ended up using the command-line FTP, and it worked.
  I am in contact with the hosting company, there was a problem with the account of the customer that solved, everything works now. Turned out not be a problem with Dreamweaver at all.

• FTP of DW MX 2004 DW CS3 ftp vs

  I upgraded from DW MX 2004 to CS3. In MX, the ftp workes fine. However, in CS3, I get an error that says it cannot connet to host host cannot be found. I still have installed MX, and it always connects fine. But, not CS3. All the settings are the same. I have to edit in CS3, close, open MX and ftp. Quite the pain. Any ideas?

  Don't use no passive unless you absolutely must.
  Add dreamweaver to your list of application you would like to communicate through the firewall.

• Linksys EA9500: FTP issues

  I recently bought and installed a Linksys EA9500 V1.1 running the latest version of the software package (1.1.6.173418).  Overall, the router performs as advertised with almost an improvement of the order of magnitude of speed on my previous router network.  However, it has some quirks that I can't work around.  With a bit of luck, I'm too stupid to configure the settings of the router correctly, but I suspect they are limits in firmware.

  Question No. 1: the FTP server cannot use TLS or SFTP; Passwords are sent in clear text over the internet

  When I try to connect to my router, either from the local network or remotely from the WAN IP address I am unable to connect with active TLS.  Therefore, the user name and password is sent by plain text that could be easily intercepted by someone using a packet sniffer.  This is not a big problem on the local network, but is a serious risk to security connecting from the internet.  At least with TLS, the communication should be encrypted, but it does not appear to be supported by the firmware. am I missing a setting somewhere?  In turn SFTP would work, but it doesn't seem to be an option to activate the SFTP, just a power switch for the FTP setting.  Is there a way to change the default 21 FTP server port to another arbitrary port?  This would at least make it a little less obvious to the casual observer.

  Question #2: FTP server cannot be restricted to the single LAN traffic

  It would bypass the first question I have a unix machine on the internal network that supports SSH and SFTP, and can get in the car to the routher via samba.  Port forwarding can redirect ports to that machine.  I have 4 network security cameras which internal download motion events via FTP on the network.  Through the firmware of the router I can only turn ftp 'on' or 'off' without additional control.  Is there a way to restrict FTP to only the LAN and preventing access over the WAN?

  Alternatively, is there any support for the DD - WRT firmware as with the WRT1900?

  Thank you

  Mike

  mcurtis wrote:

  I recently bought and installed a Linksys EA9500 V1.1 running the latest version of the software package (1.1.6.173418).  Overall, the router performs as advertised with almost an improvement of the order of magnitude of speed on my previous router network.  However, it has some quirks that I can't work around.  With a bit of luck, I'm too stupid to configure the settings of the router correctly, but I suspect they are limits in firmware.

  Question No. 1: the FTP server cannot use TLS or SFTP; Passwords are sent in clear text over the internet

  When I try to connect to my router, either from the local network or remotely from the WAN IP address I am unable to connect with active TLS.  Therefore, the user name and password is sent by plain text that could be easily intercepted by someone using a packet sniffer.  This is not a big problem on the local network, but is a serious risk to security connecting from the internet.  At least with TLS, the communication should be encrypted, but it does not appear to be supported by the firmware. am I missing a setting somewhere?  In turn SFTP would work, but it doesn't seem to be an option to activate the SFTP, just a power switch for the FTP setting.  Is there a way to change the default 21 FTP server port to another arbitrary port?  This would at least make it a little less obvious to the casual observer.

  Question #2: FTP server cannot be restricted to the single LAN traffic

  It would bypass the first question I have a unix machine on the internal network that supports SSH and SFTP, and can get in the car to the routher via samba.  Port forwarding can redirect ports to that machine.  I have 4 network security cameras which internal download motion events via FTP on the network.  Through the firmware of the router I can only turn ftp 'on' or 'off' without additional control.  Is there a way to restrict FTP to only the LAN and preventing access over the WAN?

  Alternatively, is there any support for the DD - WRT firmware as with the WRT1900?

  Thank you

  Mike

  Don't you did everything correctly. The points you mention are not part of the design of the Wifi chip. Without encryption of FTP or the Restriction on the ability of LAN.

  I have this will forward to the genius of Linksys as a feature request.

• CUE 2.3.1 backup FTP issues

  Receive the following error message when you attempt a backup through the GUI of CUE, "failed to connect to the backup server: 550 failed to create directory.". Permission denied. »

  CUE is to achieve the correct backup FTP directory because the file history.log was placed in this directory. Not sure if it has something to do with the FTP software we use - FileZilla.

  Normally, we require that it be able to create directories in the pathname specified as the backup location. I think very little, it will create a directories Configuration_1 and donnees_1 (the number may be incremented until however in many cases of backup configured; default 5, I think). The best thing to do would be to check the filezilla logs to see what he tried to do when it was denied and then create these directories.

• CS3 license issue.

  I have CS3 and all products are saying that my license has expired and I need to reinstall the software, I have now done 3 times, but always saying that he is not licensesd so I need to contact someone from Adobe. I can't even open PDF files on my computer now, which is crazy frustrating.

  What version of Mac OS X are you running? This problem is usually caused by a damaged the upgrade of the OS user account or use the Migration Wizard.

  https://helpx.Adobe.com/x-productkb/global/error-licensing-stopped-Mac-OS.html

  That installing from a new implementing user account?

• Dreamweaver CS5.5 and GoDaddy FTP issues

  Problem: Dreamweaver displays a good connection when the connection test, the FTP log shows a connection, but when I look in the directory of the file to the remote server, it only shows the folder for one of my subdomains with .bash files listed. All the other files in this subdomain are there, but never updated, even when I manually upload files to GoDaddy with their web-based file manager. Until 2014, 1 Sep settings worked very well. the directory of the remote server should display the root, not just the folder for the subdomain folder.

  Here is the FTP log:

  <---220 welcome to Pure-FTPd [privsep] [TLS].

  < 220 - you're number 41 500 user license.

  < 220 - local time now is 08:57. Server port: 21.

  < 220 - this is a private system - no anonymous connection

  < 220 you will be disconnected after 3 minutes of inactivity.

  > Abbd6888 USER

  < 331 user abbd6888 OK. Password required

  > PASS

  < 230 OK. A small current directory is /.

  > PWD

  < 257 "/" is your current location

  > QUIT

  < 221 - goodbye. You have downloaded 0 and downloaded 0 KB.

  221 < Logout.

  

  It is important to note that .bash files are not on the current server. It * must * be too many more files in the folder root that do not appear now, so I wonder what you looking for the FTP client? It seems to focus on the right server, but of course, this isn't * see * right.

  DLG.

  < 250 OK. Current directory is /.

  > CWD/apps/hmote

  < 250 OK. Current directory is/apps/hmote

  > PWD

  < 257 "/ apps/hmote" is your current location

  > PASV

  227 < entry Passive Mode (50,62,230,158,198,143)

  > LIST

  < 150 accepted data connection

  < drwx - r - x 7 abbd6888 inetuser 4096 1 Sep 17:16.

  < drwx - r - x 3 abbd6888 inetuser 4096 1 Sep 13:13...

  < drwx - r - x 2 abbd6888 4096 1 Sep 17:13 img inetuser

  <-rw - r-1 abbd6888 4533 1 Sep 13:47 index.php inetuser

  < drwx - r - x 3 abbd6888 4096 1 Sep 17:14 js inetuser

  < drwx - r - x 2 abbd6888 4096 1 Sep 17:15 scripts inetuser

  < drwx - r - x 2 abbd6888 inetuser 4096 1 Sep 17:15 styles

  < drwx - r - x 3 abbd6888 inetuser 4096 1 Sep 17:16 users

  < 226 - options:-a-l

  total of 8 games < 226

  Spoke with tech support, and the problem was that I had a dedicated from this day there IP address, so I need to point my FTP client to this IP address instead of the 'normal' FTP address

• CS3 save issue

  I have CS3 loaded, but it is not allowing me to register.  He repeats to me "there is a problem when sending information over the internet".  It does give me an option to enter my serial number or fill out a new form.  When I say I want to 'try to submit the online check-in again' it gives me the above statement.

  1What do?

  There is no need to save anything, and these pages are long in offline mode. Activation must be otherwise no problem and is not linked to the record.

  Mylenium

• Muse 2014 fix ftp

  I read there was a patch file and instructions to resolve FTP issues with Muse 2014 CC was last updated. Where can I find more information on that?

  Hello

  Release notes can be found here: http://helpx.adobe.com/muse/release-note/adobe-muse-release-notes.html

  With Muse version 2012.2.1, no special instructions are needed. If you run FTP issues with this version, please report them here.

  Thank you
  Abhishek

• Illustrator CS4 - Performance issues

  I'm about to reinstall AICS2 again. It seems that CS4 has the same performance as CS3 had issues when I create a complex illustration. I have 12 GB of memory on my Quad G5 with OS 10.4.11. I attributed to 200 GB on a separate disk from Scratch. It is almost impossible to use once my file size reaches a certain point.

  Does anyone know how to speed things up? I was wondering if I start deleting plug-ins?

  Linda,

  Did you do a save as and more writing the file? Given that I went to PDF it has the bad habit of PDF to keep the history in a separate part of the file and is not clear, until you do save as. If you have placed and replaced a lot of images, and save the file (Cmd-S) several times with different images, copies of previews are saved in this story. A few times I can get the files to drop half as much as the size of the file by Save as.

• problems loading swf to a remote server

  Hi all

  I have problems loading SWF to my remote server of Mr. There is no problem loading all my other SWF files just straight up. I get a message telling me that Dreamweaver is having a problem connecting to the remote server and it times out. I can load up the swf using cpanel. Does anyone have advice helping, what happens if something can be done to address the problem

  Concerning

  Paul

  Hi Paul,.

  Use to troubleshoot Adobe: http://helpx.adobe.com/dreamweaver/kb/troubleshoot-ftp-issues-dreamweaver-cs5.html. (cs5 is similar I think).

  BUT in any case I'm not a friend of a detailed diagnosis. This is one of the reasons why I prefer an external FTP program. The difficulties with which we must fight encourage me in this opinion, especially because we are always looking for experts, we charge a 'jack of all trades '.

  For this reason, for example, manage multiple Web sites or download my files and sometimes the reverse, for a necessary download from my server or use a "sync a whole site", I use FileZilla (cpanel I don't even know). It just seems easy for me to keep track of all transactions accurately and generate or easily reflect the desired tree structure.
  First and foremost, FileZilla has a function (translation of my German FileZilla), called 'compare the list of files. Here it is possible to use the time of size or change file as a criterion. There is also the possibility of 'hide identical files', while only those files that you want to redact remain visible.

  And even if it means that you need to install a new program, I am convinced that there is an advantage. Here is the link to get it and where you can read information on how it works:

  http://FileZilla-project.org/ and http://wiki.filezilla-project.org/Tutorial#Using_the_site_manager

  Mac: Mac OS X
  http://FileZilla-project.org/download.php

  Of course, you should also access data to reach your server.

  Good luck
  Hans-Günter

• Text engine problems

  Anyone else having this problem?  I just installed extended CS5.5 disc that I just got today and that's what I get when I try to use the text in layers or new projects... After uninstalling the trial version and the installation of the drive.

  Hi Candid228,

  I found a link through Google that could probably help (http://besidethecursor.integr-8.com/2009/07/adobe-cs3-font-issue-resolved-something.html). Let us know if it worked for you.

  Thank you

  Preran

• FTP error access denied permission issue permission to the server folder may not exist

  I've been using mx2004 then passed to cs3 and errors of publication I upgraded to cs4 thinking that might be the problem.

  I have 2 separate sites with 2 separate logins/passwords ftp.

  Only on 1 of the sites (including one with php and a site of big file that my provider has told me) I can't 'put' publish my site.

  My provider says that has nothing to do with their side.

  When I try and download the KB on the web range from 1 KB to 0kb and wipe the info.

  Each week, I use to update one of my sites.

  I added to the server a coral share Photo Album 2 weeks.

  That's when I could not been / publish my info up-to-date on my pages. But only on 1 site. The other with different site

  login/password allows me to change/to update the pages and put / post them.  It is the site of the coraldraw on.

  I took it off the coast of thinking maybe that was the issue...

  my ftp access is correct.

  my tests of connections to the sites is good.

  When turning on the remote server, it gives the following error:

  THE ERROR I GET:

  Start date: 17/07/2009 19:05

  Connected to "the name of my company."

  testzz.HTML - error - FTP is an error - can not put testzz.html. Access denied.

  The file exists may not, or there could be a permission problem.  Make sure that you have the appropriate permissions

  the server and the server is properly confirgured.

  Activity of the incomplete file. 1 file (s) or folder (s) have not been filled.

  Files with errors: 1

  testzz.html

  Completed the: 17/07/2009 19:05

  When I go to the remote site, the name of the file is showing but no content. zero KB

  I'm working on a pc. Windows xp

  I deleted the files, folders and all the ftp commands. I started on and also updated cs4.

  I removed the web album of corel draw.

  I upgraded to IE 8

  My provider has done a test page.html. I could see with 6kb. When I access the page and put some info on this subject and then put/post it goes to a blank page with 0 kb.

  Help, please... Thank you!

  Have you tried to use a distinct and 3rd party FTP client? If you can successfully connect and download to aid what he would suggest process FTP of Dreamweaver is messed up. And unfortunately, this is not surprising as it may seem, it is a part of Dreamweaver, I can meet quite regularly problems with. You can try to play with the site settings by using the Advanced Options tab, which will provide you with some additional settings for the FTP and see if that helps. Otherwise, you will have to just work around it with another FTP client.

• Portege 3940ct OS upgrade to function disabling Lan of XPSP2-Driver issues

  I have canvassed all discussions on this forum (and others) and have not found a solution to my problem. But, its obvious that major thinkers on Toshiba laptop configuration problems are here. So, if there is a solution to my problem, my best shot is in this forum.

  I'm pretty advanced in troubleshooting on this issue and the only thing that makes me think that there is a solution, it is it seems that others have installed XP on this unit.

  I have a ct of 3940; I upgraded from W2kPro to XPSP2;
  I downloaded and installed the bios, drivers and toshiba utils for unity on the Toshiba site.

  I have confirmed that all components of the system are operational. This includes a cdrom pcmcia, a network port replicator

  Everything is beautiful... EXCEPT:

  I have no network function.

  Indeed, I have basically no internet communication that it works either - even through the modem. The modem composed and as soon as the provider of the Internet service provider sends a handshake of communications, Windows XP Home edition do not recognize and disconnects. (I have not tried to fax a document - but I don't think that is relevant to the problem).

  Indeed, any type of network connection device, I try to install on the device, the device driver is not installed. This includes the network cards pcmcia (Wi - Fi 10/100 and base a - g) and usb based of a to g wireless adapters.

  Initially, after the installation of Windows XP Home edition, I found that I could not get a connection to the local network through network port replicator.

  To power on, loads WXP b/f, the network port replicator connection LEDs indicate a connection. Once expenses WXP, the port is disabled. [All other functions on the Port Replicator is operational under WXP].

  After logging in to Windows XP Home edition, Windows XP Home edition detects "new hardware" and produced through the driver install process. He then began to try to install an "unknown device". Ithen reports thatit can not locate a driver, then prompt for the user at the end of the routine of material to add.

  Device Manager reports several devices with yellow warning flags indicating that the device driver could not be installed.
  A look at the Details tab on the "unknown device" (the tab 'network device') indicates that the driver who has a problem is 'rasirda.sys '. Device Manager will not allow the device to uninstall.

  Other devices that have the yellow flag are:
  1 Toshiba FIR Port Type-D0
  2 IrDA Protocol (hidden feature)
  3 TCPIP (hidden feature)
  and a network card, I try to install.

  Facilities of device driver for network adapters, including the network port replicator controller (Intel 8255 x based pci Ethernet adapt (10/100) and his sister pilot), does not install (and will not uninstall until the device is removed).

  A glance at the window of the administrator system "Services" shows that essentially all the services necessary to support network/internetrleated services are disabled. Dependencies show that all these services depend, directly or indirectly, on "services.exe". This service will not run, and when the service is to begin, WXP reports that the service.exe does not start the program described.

  Topic 'Information System', a glance at the 'network' tab indicates that there is an adapter called "RAS Async card" disabled.

  My first approach to this problem was to reinstall the update of the Toshiba driver for the controller Toshiba FIR. Nothing helps.

  The next thought was simply to disable the function of TREE, but that cannot be done at the level of the bios... and well, as ambitious as I am, I didn't venture into the machine to determine if the IR controller could be disconnected or removed from the system board. [But if it is a possible solution, then I'll go...]

  As noted above, the only reason for which I hope is it seems that others have run successfully of XP on the 3xxx series porteges, who, to my knowledge all have this same IR port. Also, Toshiba has even written an XP driver for the device.

  What I find curious, among other things, is that Device Manager reports the Rasirda.sys device on the network adapter tab. I would have thought it would have been reported under the 'no plug and play' or the tabs 'system device. Whatever it is, it seems that Toshiba has implemented the infrared device such as a network adapter, or at least that's how WXP is grateful.

  I searched the internet, on the site of Toshiba, microsoft XP, knowledge databases, Web pages etc. and did not meet all the remarkable solutions se... Although I enjoyed some of the protocols troubleshooting - not my real ambition.

  Bottom line, is that I have this computer connected to the internet. With all protocols, and internet communications services disabled, even through the modem... Well, its ridiculous. I can't yet register WXP! Absurd is that! Well well its been late.

  I hope someone will have a solution/workaround solution that will solve this problem.

  In the meantime, I think that the next step is to start over and reinstall XP and try... again.

  I'd appreciate any help that anyone can gather.

  Hello Andrew

  It's always interesting that a lot of users are trying to install WXP on older models. Respect! The problem is that 3xxx Portege is not supported for Windows XP Home edition and I wonder that you have found the drivers and tools for this device. On Toshiba Europe don't here are some drivers for Windows XP Home edition and I assume you found the download of some of them on Toshiba U.S. page.
  Am I wrong?

  Sorry but I have no concrete solution to your problem

• Dreamweaver CS3 - problem with FTP.

  Dreamweaver CS3 problem (version 9.0 build 53)-with FTP. I took my host FTP connection settings and try to put them in Dreamweaver - it download my site only partially. If I use the same settings on FileZilla FTP - it download the site as intended. What is the problem with my Dreamweaver FTP?

  Sorry for my English.

  Thank you for your attention.

  Nikolai

  Dreamweaver CS3 is a very old program. 8 full behind versions. It is likely that the DW FTP is obsolete and does not support connections to the host.