Linksys EA9500: FTP issues

Similar Questions

• Linksys wrt1900ac - FTP address changing constanty - it drives me crazy!

  Hello!

  I enabled the FTP server. Everything works fine, BUT:

  How can I stop the router from its address of the FTP server constantly evolving? This is the first 79.222.11.35:21, then after a few days 79.222.18.68:21 and so on.

  Every day is different, which means that it is difficult to work with. This behavior is costing me a lot of nerves and brings a lot of trouble. I have stock for customers on the hard disk that is attached to the wrt1900 and I myself can not access data when I need it. The irony is - I bought the router due to its internal functioning of the FTP server, but now - it is unusable.

  No idea how can I stop this?

  concerning

  PS: I do not know if this is relevant: the hard drive is powered by USB and goes into standby mode if you do not - I like this behavior.

  kosmoface wrote:

  "The latest version of the firmware does not open the FTP server side WAN (Internet) of the router." The previous firmware was a security issue where when was activate the FTP all the files are available in the side Internet without security. »

  Please help me out here: This means that I can't basically give someone a direct link to its share on the FTP Server internal wrt1900ac? Which means I need a ftp server or NAS extra homemade for that?

  And I found this:

  Linksys WRT1900AC supports the DynDNS.orgproviders, TZO.com and NO - IP.com .

  Which means that I have TO use these providers and nothing else?

  Answers to your questions:

  1. This means that I can't basically give someone a direct link to its share on the FTP Server internal wrt1900ac?

  Yes all I KNOW with the Linksys Firmware Ver.1.1.8.161917 the FTP server does not allow access to the WAN (Internet)

  2. which means I need a ftp server or NAS extra homemade for that?

  You can flash OpenWRT McWRT and have access to the server FTP WAN on the WRT1900AC

  3. the Linksys WRT1900AC supports the DynDNS.org, TZO.com suppliers and NO - IP.com . Which means that I have TO use these providers and nothing else?

  Yes, but with OpenWRT McWRT you can use any provider.

  -----------------------------------------------------------------------------------------

  Read the Wiki home page if you decide to go forward with OpenWRT.

  https://github.com/Chadster766/McWRT

  https://github.com/Chadster766/McWRT/releases

  https://github.com/Chadster766/McWRT/wiki

  https://github.com/Chadster766/McWRT/issues

  Use the well known to start default settings. I recommend only change the SSID and passwords of wireless security until you become more familiar with it.

  Wireless information is not provided in the router, the user interface, but you can get that from the connected devices.

  If you need assistance with configurations of OpenWRT thanks for posting in the OpenWRT thread at the top of the forum.

• Linksys EA9500 LED problem - a solid blue line

  I had the EA9500 for a little more than a month without problems and the strong performance.

  Just yesterday, I noticed that the extreme left LED is a solid blue line on the top and the bottom of the white LED.  So the white LED is there (al that strong white LEDS is there), and above and below the left LED is a solid blue line.  It has been published.

  I restarted the router, it just comes back.

  I checked the router diagnostics and everything seems OK.  My son says that he has wireless connectivity problems, but I don't know if the two are related.

  I can't find a source to tell me what it means to the blue line.

  Any ideas?

  Thank you.

  The blue LED when the EA9500 is running indicate a device connected to MU-MIMO which is very cool and high technology.

• CUE 2.3.1 backup FTP issues

  Receive the following error message when you attempt a backup through the GUI of CUE, "failed to connect to the backup server: 550 failed to create directory.". Permission denied. »

  CUE is to achieve the correct backup FTP directory because the file history.log was placed in this directory. Not sure if it has something to do with the FTP software we use - FileZilla.

  Normally, we require that it be able to create directories in the pathname specified as the backup location. I think very little, it will create a directories Configuration_1 and donnees_1 (the number may be incremented until however in many cases of backup configured; default 5, I think). The best thing to do would be to check the filezilla logs to see what he tried to do when it was denied and then create these directories.

• Dreamweaver CS5.5 and GoDaddy FTP issues

  Problem: Dreamweaver displays a good connection when the connection test, the FTP log shows a connection, but when I look in the directory of the file to the remote server, it only shows the folder for one of my subdomains with .bash files listed. All the other files in this subdomain are there, but never updated, even when I manually upload files to GoDaddy with their web-based file manager. Until 2014, 1 Sep settings worked very well. the directory of the remote server should display the root, not just the folder for the subdomain folder.

  Here is the FTP log:

  <---220 welcome to Pure-FTPd [privsep] [TLS].

  < 220 - you're number 41 500 user license.

  < 220 - local time now is 08:57. Server port: 21.

  < 220 - this is a private system - no anonymous connection

  < 220 you will be disconnected after 3 minutes of inactivity.

  > Abbd6888 USER

  < 331 user abbd6888 OK. Password required

  > PASS

  < 230 OK. A small current directory is /.

  > PWD

  < 257 "/" is your current location

  > QUIT

  < 221 - goodbye. You have downloaded 0 and downloaded 0 KB.

  221 < Logout.

  

  It is important to note that .bash files are not on the current server. It * must * be too many more files in the folder root that do not appear now, so I wonder what you looking for the FTP client? It seems to focus on the right server, but of course, this isn't * see * right.

  DLG.

  < 250 OK. Current directory is /.

  > CWD/apps/hmote

  < 250 OK. Current directory is/apps/hmote

  > PWD

  < 257 "/ apps/hmote" is your current location

  > PASV

  227 < entry Passive Mode (50,62,230,158,198,143)

  > LIST

  < 150 accepted data connection

  < drwx - r - x 7 abbd6888 inetuser 4096 1 Sep 17:16.

  < drwx - r - x 3 abbd6888 inetuser 4096 1 Sep 13:13...

  < drwx - r - x 2 abbd6888 4096 1 Sep 17:13 img inetuser

  <-rw - r-1 abbd6888 4533 1 Sep 13:47 index.php inetuser

  < drwx - r - x 3 abbd6888 4096 1 Sep 17:14 js inetuser

  < drwx - r - x 2 abbd6888 4096 1 Sep 17:15 scripts inetuser

  < drwx - r - x 2 abbd6888 inetuser 4096 1 Sep 17:15 styles

  < drwx - r - x 3 abbd6888 inetuser 4096 1 Sep 17:16 users

  < 226 - options:-a-l

  total of 8 games < 226

  Spoke with tech support, and the problem was that I had a dedicated from this day there IP address, so I need to point my FTP client to this IP address instead of the 'normal' FTP address

• CS3 FTP Issues in XPSP2

  Recently upgraded to DW CS3 on my laptop and desktop, running DW MX2004. Both machines are XP SP2. I have a problem (in all the hosting companies I use, 1 & 1, Omnis, etc.) where my FTP puts will be excessively timeout. I have to click the X in the background file activity window to cancel... and then disconnect the component files... then cancel this operation as well. I wait for 20 seconds, reconnect, and then I can put it--after he tells me on a synchronization problem where I have to click Yes to. This happens 60 percent of the time on the desktop computer, but only 3 to 5% of the time on the laptop.
  
  Also, when I have to cancel the set, my web server displays only a blank page until I can complete a put option. This includes pages that were correctly loaded before... they 'disappear.' I waited to see a Dreamweaver via Adobe Updater update...

  He works with passive FTP mode... but once I close DW, then reopened, he was back to the same old, same old. I failed it and set it to Secure FTP - now, not only works, but it's three times faster.

  Thanks for all the help - made me try the right stuff!

• Material EA9500 v1.1

  Device (EA9500) new quite surprised to see a material v1.1 released.

  It means something interesting? Maybe just a factory where components have been changed leila?

  I assumed that Linksys will not say that v1.1 fix something broken in v1. :-)

  Hi, nsfw. Linksys EA9500 V1.1 is only to conform to the new rule, FCC (transmission power level) effective in June 2016.

• Muse 2014 fix ftp

  I read there was a patch file and instructions to resolve FTP issues with Muse 2014 CC was last updated. Where can I find more information on that?

  Hello

  Release notes can be found here: http://helpx.adobe.com/muse/release-note/adobe-muse-release-notes.html

  With Muse version 2012.2.1, no special instructions are needed. If you run FTP issues with this version, please report them here.

  Thank you
  Abhishek

• problems loading swf to a remote server

  Hi all

  I have problems loading SWF to my remote server of Mr. There is no problem loading all my other SWF files just straight up. I get a message telling me that Dreamweaver is having a problem connecting to the remote server and it times out. I can load up the swf using cpanel. Does anyone have advice helping, what happens if something can be done to address the problem

  Concerning

  Paul

  Hi Paul,.

  Use to troubleshoot Adobe: http://helpx.adobe.com/dreamweaver/kb/troubleshoot-ftp-issues-dreamweaver-cs5.html. (cs5 is similar I think).

  BUT in any case I'm not a friend of a detailed diagnosis. This is one of the reasons why I prefer an external FTP program. The difficulties with which we must fight encourage me in this opinion, especially because we are always looking for experts, we charge a 'jack of all trades '.

  For this reason, for example, manage multiple Web sites or download my files and sometimes the reverse, for a necessary download from my server or use a "sync a whole site", I use FileZilla (cpanel I don't even know). It just seems easy for me to keep track of all transactions accurately and generate or easily reflect the desired tree structure.
  First and foremost, FileZilla has a function (translation of my German FileZilla), called 'compare the list of files. Here it is possible to use the time of size or change file as a criterion. There is also the possibility of 'hide identical files', while only those files that you want to redact remain visible.

  And even if it means that you need to install a new program, I am convinced that there is an advantage. Here is the link to get it and where you can read information on how it works:

  http://FileZilla-project.org/ and http://wiki.filezilla-project.org/Tutorial#Using_the_site_manager

  Mac: Mac OS X
  http://FileZilla-project.org/download.php

  Of course, you should also access data to reach your server.

  Good luck
  Hans-Günter

• WCV54G &amp; new firmware &amp; FTP from Linksys

  Hello

  just got a WCV54G and thought I would check this forum for any word experience. I had a good idea here, but I can't seem to find answer to what firmware V510 intamac is and if its best to install this on the 2.11 firmware?

  Also, I can't on the linksys ftp server, it's down? (although it could be blocked at work).

  If the FTP server is down, anyone know where I can download 2.12, 2.15 and intamac V510 firmwrare?

  Thanks in advance.

  additional - found a site where you can get the firmware from.

  http://download.modem-help.co.UK/MFCS-L/Linksys/Web-cams/firmware/

  

• FTP error access denied permission issue permission to the server folder may not exist

  I've been using mx2004 then passed to cs3 and errors of publication I upgraded to cs4 thinking that might be the problem.

  I have 2 separate sites with 2 separate logins/passwords ftp.

  Only on 1 of the sites (including one with php and a site of big file that my provider has told me) I can't 'put' publish my site.

  My provider says that has nothing to do with their side.

  When I try and download the KB on the web range from 1 KB to 0kb and wipe the info.

  Each week, I use to update one of my sites.

  I added to the server a coral share Photo Album 2 weeks.

  That's when I could not been / publish my info up-to-date on my pages. But only on 1 site. The other with different site

  login/password allows me to change/to update the pages and put / post them.  It is the site of the coraldraw on.

  I took it off the coast of thinking maybe that was the issue...

  my ftp access is correct.

  my tests of connections to the sites is good.

  When turning on the remote server, it gives the following error:

  THE ERROR I GET:

  Start date: 17/07/2009 19:05

  Connected to "the name of my company."

  testzz.HTML - error - FTP is an error - can not put testzz.html. Access denied.

  The file exists may not, or there could be a permission problem.  Make sure that you have the appropriate permissions

  the server and the server is properly confirgured.

  Activity of the incomplete file. 1 file (s) or folder (s) have not been filled.

  Files with errors: 1

  testzz.html

  Completed the: 17/07/2009 19:05

  When I go to the remote site, the name of the file is showing but no content. zero KB

  I'm working on a pc. Windows xp

  I deleted the files, folders and all the ftp commands. I started on and also updated cs4.

  I removed the web album of corel draw.

  I upgraded to IE 8

  My provider has done a test page.html. I could see with 6kb. When I access the page and put some info on this subject and then put/post it goes to a blank page with 0 kb.

  Help, please... Thank you!

  Have you tried to use a distinct and 3rd party FTP client? If you can successfully connect and download to aid what he would suggest process FTP of Dreamweaver is messed up. And unfortunately, this is not surprising as it may seem, it is a part of Dreamweaver, I can meet quite regularly problems with. You can try to play with the site settings by using the Advanced Options tab, which will provide you with some additional settings for the FTP and see if that helps. Otherwise, you will have to just work around it with another FTP client.

• Download issues of FTP files using safari 9.1

  Using other browsers (chrome and firefox) I can click on a link that will download a file FTP on my macbook pro. In safari 9.1 however I get an "unknown error" (NSURLErrorDomain: - 1). The link that I use is ftp://ftp.ebi.ac.uk/pub/databases/genenames/new/tsv/locus_groups/other_alt_loci. txt. I tested this link on other former Mac (safari 6) and the download of the works. I also emptied the history, the web of data, wiped the plists in ~/Library/Preferences associate with safari (IE "com.apple.Safari.plist", "com.apple.internetconfigpriv.plist" and "com.apple.internetconfig.plist") and deleted all the files under ~/Library/Safari but still no joy.

  I left wondering if there is a bug in some other situations somewhere or wether 9.1 safari just may not download files ftp more.

  Kris

  I think you'll have problems trying to do it on Safari. Please see this discussion > can not download files via FTP

  Try it on Firefox or Chrome.

• more a bug than a firefox issue report No 10 mangages https with linksys routers

  Linksys cannot eat Conect via https to a router
  That is to say athentacates fine firefox worked with version 9

  I followed the instructions in the link of SafeBrowser concerning support for MS ( http://support.microsoft.com/kb/2643584 ) newsletter and applied FixIt 50824.

  IE9 now works correctly. Firefox and Chrome are not.

• Cal issue when you run the FTP server

  My organization has recently purchased Enterprise Cloud Suite (ECS) and as such in Core Cal went (included in the ECS).

  I have a section that needs to be 'entrepreneurs' access a FTP server that will be used to upload and download files only.  No application will run.

  How are they managing Cal licenses?  Contract users need client access licenses to access the FTP server?

  It was suggested that all I could need is to have a Windows external connector... ??

  Is there a better way to store and transfer these files?  Azure storage?

  Hello

  Please post your question here:

  https://social.technet.Microsoft.com/forums/en-us/home?searchTerm=default%20Ftp%20server

• Linksys E4200 - range WUSB600N V2 / signal issues

  Router Linksys E4200 dualband and Win7 64 bit Linksys WUSB600N v2.
  Both in the same room, the distance is about 10 meters.
  I compare the results on 5 GHz btw the stick of Linksys and btw another laptop with Intel Advanced-N 6200 AGN wifi chip.
  Running a wifi 5 GHz N on the stick of Linksys, leading to the signal strength low and reduced its speed.
  Practically, I can't improve the signal than the Intel + 15 to 20 dB...

  Negligible:

  distance / Intel / Linksys:
  <1 m ="" -26db="">

  5 m /-50 dB /-65dB

  While Intel radio affects 300 MB/s, the Linksys is somewhere around 200 MB/s only. in the same room
  Anyone else knows a bad signal with the WUSB600N v2, as well? I bought the stick to stream HD media, but with - 65dB is not much of an improvement to what I had on 2. 4 Ghz, 802.11 g (())

  Sorry, but how is this releated response must keep the problem I described?
  disable the firewall on the router spi?
  I checked the possibility of automatic channel selection and channel 20-40 establishments width (automatic channel selection does NOT work correctly from either). I still have the experience that the stick has lower than intel one signal. regardless of the setting of the router firewall