Similar Questions

• Help. Very stupid problem with the placement of word files.

  As you can see I am a beginner total to Indesign. I don't know how but I can't place any text imported from Word into my project. Weird thing that if I create a new document it works. However, in this project I've done a lot of styles and other things so I don't want to start from scratch, so the question is:

  Is there some option "I accidentally the entire project" and is anyway to fix it. [Or maybe export styles and master pages to another document?]

  The problem with the placement of text word said that the text is too big (Red Cross).

  InDesign CS6 30 day trial.

  Post edited by: Niebieski_Mak

  Ok.

  There are a number of possibilities for what are the causes of the text immediately became excessive. Is usually only a problem with a youove of added restrictions that makes a too wide to fit in the frame line (but it can also occur if you have a set of "keep the option" which requires the text to stay together and there is inusfficient space to hold all the lines, or requiring that the text starts on an odd page / hand and the one you have is wrong).

  The most common cause is probably the wrong application of the No. Break attribute. New users sometimes confuse this to how to disable hyphenation, but in fact it prevents any text to which it is applied to break even between words. Next most common, I think, is a long text string with nonbreaking spaces between the words (I see a lot of this in Word documents), and not allowing not standard, yet once, there are no place to get out.

  I've also seen cases where the format for the text calls for a font size of very large size, which makes it impossible to fit the text, or when the dashes from left or right, in the paragraph style, override local formatting or text block options, are too large to allow the text to fit.

  The best way to find out, in my opinion, is to choose the frame then go to Edition > edit in story editor, you can see and select the text and check these things.

• DW CS3 problem with images PNG-8 in design mode?

  DW CS3 (build 3481) XP seems to have problems with PNG-8 images, specifically trying to in Design view.

  I had a very simple image that could be exported by Fireworks CS4 as PNG - 8 using 4 colors (no transparency) for a file size tiny less 250 bytes.

  Impossible DW display at all, or even recognize it, reports that it was 0 x 0 in size. I published the page anyway, and he seemed fine in the browser.

  I upped the number of colors to 32, and DW could then view it in Design view in the page, I was working on that.

  I always have problems with the other PNG-8 images. The attached file "temp.jpg" is a screenshot showing the part of the design view in DW.

  The small picture to the left of the banner is "58_certificate_of_discharge.png" (attached), and the largest image below is used as the background of the DIV containing the form, (also enclosed) "compassbk.png".

  These pictures all look well in the browser, but terrible in DW.

  I'm puzzled as to why.

  Thanks in advance.

  I think I can say that if this is a problem with the CS3 version, you're stuck with it.  I have never known Adobe/Macromedia to patch a version, once a newer version has been released.  I saw no problem with the PNG 8-bit, 4 colors seen in CS4, I created, and I guess that would apply also to the other variations of your.

• Problems with the placement of PDFs in CS4

  I recently upgraded to CS4. I'm having a problem when I place a pdf in indesign CS4. When I place the PDF changes the size of the pdf file. For example, I'm trying to put a pdf file which is in 3.5 by 4.75 in. When I place it in CS3 it keeps the same size. When I put in CS4, it changes the size of 4.515 in by in 6,125. I looked at the preferences options import. I have searched for it and I can't understand how to solve this problem.

  Image by placing the behavior has undergone a radical change between CS3 and CS4. In CS4 when you click and drag a slider to place the image will evolve to adapt to the resulting image. If you click on and release, it will be set to 100%. If you put in an existing framework, it will come in according to the options of adjustment applied to the frame.

• Hello I have problem with my site, and mozilla. Google chrome, safari, explorer, opera work ok. Mozilla Heve problem with images?

  Hello I have problem with my site, and mozilla. Google chrome, safari, explorer, opera work ok. I have Sobipro for both the company and the logos and images without work!
  When I try to open the url is this:http://www.athens-dayandnight.gr/images/sobipro/entries/288/587_img.jpg

  whith mozilla is the following: /images/sobipro/entries\288\587_img.jpg when ichange it------with this / work.

  any idea?

  Thank you

  Hello, the URLS that contain-in their path are not valid. Firefox is less tolerant to errors in this respect than other browsers.
  Correct the path to http://www.athens-dayandnight.gr/images/sobipro/entries/288/587_img.jpg in the source code of this site or if you don't control the contact of the site their webadmin to do...

• Inspiron 1525 - problems with image restore factory (need help!)

  Hi all
   
  I have a problem with my Dell Inspiron 1525, I can not solve... so please help me!
   
  My Windows Vista Home Edition crashed while installing an update and now could not start more (I always get this bad blue screen during startup), so I would like to repair my laptop using the Dell factory image.
   
  I'm doing... .with related problems
   
  1. I press F8 during startup, but there is no entry "Dell factory image restore" or something like that (I even tried each one entry but nothing factory imagine restoration).
   
  2. by starting with a Ubuntu live cd, I can see that there is a partition that contains (among other files and folders) that image (:\dell\image\factory.wim) and a Tools folder where there are files imagex.exe and pcrestore.exe
   
  3 one... Using a pen drive usb bootable containing a bootable back version, I Prime the system. I also put in the usb pen, ntfspro.exe in order to read the ntfs partition
  b. I went in D:\Tools and run this command:
  > PCRestore.exe --> but I received an error message indicating that this program cannot be run in dos mode
  c. so I tried this other person (I've read here in the Forum):

  > imagex/apply c:\dell\image\factory.wim 1 c:\ --> but I got the same error as above, it is impossible to run this program in dos mode

   

  4. in addition (and I think it's weird), I tried to boot with the dvd operating system shipped by Dell with the laptop: loading at startup of Windows, but just after the progress bar (green) appears at the bottom of the screen, it blocks showing again this bad blue screen!

   

   

  Now I don't know what I can do!

   

   

  .. .Please help me!

   

  Is there a way to restore the laptop with the Dell factory image?

   

  Thank you

  Orlando

  orlando1,

  Thank you for using the Dell Community Forum.

  When you press F8 and the menu, choose the option which reads 'Repair your computer' and follow the menu to restore the system.
  

  This utility formats the partition of hard drive to the operating system before you restore the original image. This means data on that partition is deleted and cannot be retrieved.

  If you create a second partition with a third-party utility, Dell Factory Image Restore remains unchanged until the partition of the image is not deleted.

• 2015.3 version of first having problems with images DJI OSMO k 4

  The latest version of first Pro CC (2015.3) is to have huge problems with 4 K of my DJI OSMO Zenmuse X 3 images. It meets generic errors when you import the footage in the project, by accepting some clips, but not other apparently at random. It gives my custom built Windows 10 PC errors on low ram and also gives me the same issues on my laptop MSI Ghost Pro. I went down first to the previous version, and there is no problem. I don't know if it's just a problem with the Osmo or 4K in general. Please fix this.

  It is just a forum for users.  You should notify Adobe on the questions below.

  Feature request/Bug Report Form

• You have a problem with 6th place with the CAP in ythe filter in photoshop CC2015?

  
  Hi

  I have a problem with the number of places 6 on my Mac 2 in photoshop CC 2015: the number 6 plug won't run right... I ask a question about Adobe helpdesq phone, the creators of witch plugin work not... but no answer!

  and Digital Anarchy give tme he good answer (a big thanks to them) 6 places are sometimes a "dead spot", you need to install a trial version of antoher Plug and after cursed instead number 6 is busy and all the other plugsin run right: according to the response of Digital Anarchy

  "Ah, we've seen this bug before. We do not know why this is happening, this happens on all applications Adobe CC I think, but when some plugins are listed as the 6th plugin in the filters dropdown you get the error you see. This is purely something on side of things Adobe. It's annoying, but the only way around is to remove some plugins, so that the 6th plugin is changed it's order in the list of 5 or lower OR install another plugin (trial version would work fine) which would fall our plugins up to 7 or higher. Sorry, there is no way to change the order of the plugins either. »

  
  

  Samsam
  

  
  

  Hi samar.

  This is a bug experienced with Photoshop CC2015 and the engineering team working on it.

• Problems with images after the subclips

  Hey there

  Today I woke up to see all subelements, I made my most recent project. Just today, footage looked more pixelated and blurry.

  What might of happened? When I stop the image the quality is exactly as it was before. But when played his more pixelated.

  Some of the images was shot at a lower resolution, but when I put the size of the screen to the appropriate resolution quality always looks bad.

  Would this have something to do with the manufacture of the subitems? Even go back and see the clips that came the subclips: the film is even more 'pixely '.

  Any help appreciated

  @

  Hi pavalanche11,

  Sorry for the problem. If it is fixed?

  Please consider these points for this problem:

  1. it looks in any case related to subitems.

  2 as you mentioned after a break the clips, they look very good, but not the same case playing; It could be linked to the resolution Pause and play in the monitor Panel.

  You can get these settings, either by clicking the exit button in the lower right of the monitor Panel or by right clicking on the items in the monitor Panel.

  3. you also said that you pulled these clips at a lower resolution. By changing the values in the resolution of reading as suggested above, they may work properly.

  Here is the text of pdf help Prelude:

  Some formats are difficult to display in full motion by reason of their high compression or broadband playback. A lower resolution playback faster but at the expense of the quality of the image. This compromise is particularly visible when you view the other H.264 and AVCHD-based codec of the media. Less than full resolution these formats have turned off error correction, and artifacts are common during playback. These artifacts, however, do not appear in the exported media.

  Use separate reading and resolutions of break to better control the monitoring experience. With images high resolution, resolution of the reading to a lower value (for example, 1/4) for smooth playback and the resolution of the break in full. These settings allow you to check the quality of the details of development or the edge when you stop playing. Cleaning put the monitor resolution of reading, stop no resolution.

  

  I hope it helps. Customer feedback is important to us. Continue to write in the case of any confusion.

  Thank you

  Mayjain

• Problems with images in Muse

  We have at any given time 2 or 3 photos on our website that half is cutting.  Go Daddy, we use for our accommodation.  The lower half of the space allocated for the image is gray or white.  We have removed the images several times, that she replaced, re added the same photo, troquee the spaced which image goes where and whenever we have repeat the site 2-3 images are cut.

  Our Muse and BC are perfect, the question is considered only in line on the published site.  It is not always the same place or the affected image, but as soon as we fix one, another Cup.  I am unable to put screenshots here but would be happy to send an email to someone who can help.

  Portfolio

  The link above is to the portfolio page on our site where we had the question.  At that time, upward, stainless steel countertops is cut, 2-3 of the way down the page, the image of cable railings and planter boxes is cut and further down is so the footrest bar. It is meaningless, as soon as fix us an image that another task is assigned.  Once we have removed the pictures and re added, we had images in different places, we used different images - at any given time, there are 2-3 pictures with the bottom half cut.

  Go Daddy told me that our text has been added as an image with brightfield, and our images have been added as a backdrop, background display 'options' not 'image options.  This is not correct, our test is added as text, and we can change it.  Our images are added in the form of images, with "image options.  I'm on the phone with Go Daddy right now (one representing different of course) and they tell me that he could not have told me that they do not have a way to see the 'options' we would.  So I'm really pleading just for anyone who thinks they can help give a shot - please and thank you!

  Cutting on the website photos

  Here is a link when we have asked this question previously but ceased to answers

  As mentioned in the previous post and you mentioned that it works in British Colombia, please provide the url of the BC site too which might help in the investigation.

  Thank you

  Sanjit

• Problem with the placement of layer 3D Ray Trace

  I have problems with this ORB. I want it revolve around the ferret, as it seems to be made up display on the right, but when it is in the camera activates, it remains before the ferret. If I place the ORB layer below the layer of ferret, so everything is behind the ferret. I can't surround around well. Any ideas on how to get this to work? I work in Raytraced 3D.

  I am running After Effects on mac osx 10.7.4 11.0.1.12 CS6.

  

  Edit: To give more information, the orb is a CC Particle World with a glow effect.

  So here is what I found that worked. I took the extruded ferret and the movement of the camera and pre-comp had, he fell into a new comp, he made a 3D layer, then put my particle effect in and using the obstructing layer as you suggest, I could successfully create the scene that I was going to. He also spead to the top the overview and updates LiveUpdate considerably.  I also used a mask to make smaller ferret model, although I don't know if that actually does something.

  Thanks ShiftHorizon for suggesting particular and thanks Mylenium for obfuscation layer!

• Problems with images in offline mode

  Hello, I'm coming back in video editing and I run into some roadblocks frustrating with Adobe Premiere Pro CS4.  I use one, what I discovered for cheap camera, Samsung SMX - F40. IM shooting resolution 'Fine TV', which I believe is 720 x 480.  By trial and error, I think I have a Preset of correct when creating my project sequence, because I successfully under the leadership and downloaded the video on YouTube that was my goal for this project. But he had problems all the time with the video going on offline so I had to re - change a lot.  Revisit the project final file only days laters, it is once more unusable because some clips are again in offline mode.  I try to re - link them, but the files are "format unsupported or damaged."  These are the same files with the same name in the same place that I used to create the video and he suddenly doesn't like them now.
  
  The files are .mp4, I read that this first seems to have problems with.  I used Bigasoft Total Video converter to change my .mp4 in .mp4 I read first would like better. But I still have the same issues. He's not either.
  
  I'm a bit lost and I was wondering if anyone has advice or solutions that could solve my problem.

  Welcome to the forum.

  This ARTICLE is about a bit of Offline media, but with this error message, it looks more like your fully-paid version of CS4 has been bitten with him back to Bug Trail. This has happened to multiple users and is mostly the result of the update of PrPro. A quick check, create a new sequence and see if you still all Presets of HD. It is likely that you do not have. This affects what it is MPEG, so HD or SD and it's just to quickly see what you have available.

  The "fix" is an operation of several stage and in this order:

  1. Disable, if possible (probably not, as the trial is not activated)
  2. Uninstall PrPro
  3. Download and run the Adobe CS5 of Tool Cleaner (latest version) several times, rebooting between each series.
  4. Install PrPro
  5. Immediately upgrade to the latest version before embarking
  6. Launch and test

  Good luck

  Hunt

• A problem with Images of great CSS background

  I have two images of great background, placed at the bottom of the page. The problem with the help of the bottom property to position a picture is that browsers that don't have much height will cut upper part of the image (in my case, Santa). Here is the link:

  http://www.holidaymarket2010.com/

  By reducing the height of your browser, you can see what I mean. The image starts at the bottom of the page, so if the screen is not high enough the upper part of the image will be cut off.

  The image must be position at the bottom because the Christmas tree (piled up like a Christmas tree bulbs) is cut down. The background looks fine in most browsers, but there are many portable large screen that have less height than most of the other screens.

  Ideally, I'd like the image to start at the top of the page, as if I had used the top property position my images. So, there's the dilemma. I wonder if anyone knows of the tips of how I could pull this off. In other words, I want to position the image at the bottom of the page, but I want the lower part to be cut, not from the top, if the screen does not have enough height to display the entire image. Any ideas?

  How about you decide your BG image in two separate images, configure a container for each, and you can then position Santa on top.

• [JS] [CS3] Selection menu with images

  I have no idea it is possible, but I wrote this code at the beginning of a script to select a function in the script:

  myDialog = app.dialogs.add ({name: 'Selector of Catalogue'});

  with (MyDialog)

       {

  with (dialogColumns.Add ())

            {

  with (dialogRows.add ())

                 {

  staticTexts.add ({staticLabel: "select the catalogue required :"});})

  myOptionButtons = radiobuttonGroups.add ();

  with (myOptionButtons)

                      {

  radiobuttonControls.add({staticLabel:"VW"});)

  radiobuttonControls.add({staticLabel:"Peugeot"});)

  radiobuttonControls.add ({staticLabel: "MG Rover"});

  radiobuttonControls.add ({staticLabel: "Special BMW"});

  radiobuttonControls.add ({staticLabel: "Nissan HTML"});

  radiobuttonControls.add ({staticLabel: "Nissan XLS"});

  radiobuttonControls.add ({staticLabel: "BMW (GB)" "});

  radiobuttonControls.add({staticLabel:"SEAT"});)

  radiobuttonControls.add({staticLabel:"Citroen"});)

  radiobuttonControls.add({staticLabel:"Vauxhall"});)

  radiobuttonControls.add ({staticLabel: "SAAB 1st column"});

  radiobuttonControls.add ({staticLabel: "SAAB column 2"});

  radiobuttonControls.add({staticLabel:"Audi"});)

  radiobuttonControls.add({staticLabel:"Fiat"});)

  radiobuttonControls.add({staticLabel:"Ford"});)

  radiobuttonControls.add ({staticLabel: "Ford LCV"});

  radiobuttonControls.add({staticLabel:"Honda"});)

  radiobuttonControls.add ({staticLabel: "SIZE FUNNY Vauxhall"});

  radiobuttonControls.add({staticLabel:"Hyundai"});)

                      }

                 }

            }

       }

  Ditto = myDialog.show ();

  and I want to be able to do is to add an image to each option.
  Is this possible?

  I'm looking to work with CS3 only for the moment.

  See you soon

  Roy

  Sir Roy Marshall

  Copy the code below:

  var myDialog = new window ("of dialogue ',' taste ');

  Adding buttons

  myButton1 = myPanel.add ('button', [380,13,75,25], 'Choose', {name: 'button1'});

  myButton2 = myPanel.add ('button', [380,53,75,25], 'Choose', {name: 'button2'});

  myButton3 = myPanel.add ('button', [380,93,75,25], 'Choose', {name: 'button3'});

  myCancel = myDialog.add ('button', [500,120,100,25], 'Cancel', {name: "Cancel"});

  myImage = myDialog.add ('image', [487,16,588,100],'/ Macintosh HD/Applications/Adobe InDesign CS3/Scripts/Scripts Panel/Images/xxx.png']);

  myCopyright = myDialog.add ("statictext', [15,153,400,172],"© xxxxxxx Ltd 2009'");

  myButton1.onClick = function()

  {

  Alert ("this is the first");

  }

  myButton2.onClick = function()

  {

  Alert ("this is the second button");

  }

  myButton3.onClick = function()

  {

  Alert ("this is the third button");

  }

  function myCancel.onClick =)

  {

  Alert ("close the Menu");

  myDialog.close ();

  }

  myDialog.show ();

  Use this Code!

  Concerning

  Thierry T.R.Harihara

• Problem with images and text of Kaleidoscope

  Dear reader
  I'm having a problem with the Kaleidoscope of the content in the left column of my Web page. It will align correctly in internet explorer, but I would like it to also align correctly in Opera and Firefox as many people use browsers thise also. Here are links to the screenshots to show you what I mean. The problem is selected in orange.
  http://www.iggpog22.com/mystuff/gap.png - there is a gap between my star logo and the header image 'links '.
  http://www.iggpog22.com/mystuff/nogap.png - there is no difference between my star logo and the 'Links' header image in dreamweaver so that is how I like to view.
  
  If someone could offer some advice, I would be very grateful. I generally try to develop things for me, but this problem has left me speechless. I can also provide the html code is that need you. Thanks again for any response.
  . Sam
  
  Edit
  This is a link to a .rtf file of the code for the Web page
  http://www.iggpog22.com/Mystuff/ig2code.RTF
  You can also visit my Web page at the www.iggpog22.com (I include www. otherwise, it shows the wrong website)
  I hope that's enough to be more useful

  Monday, July 16, 2007 15:42:53 + 0000 (UTC), "02cspearson".
  wrote:

  > http://www.iggpog22.com/mystuff/gap.png - there is a gap between my star
  > logo and the image header 'links '.
  > http://www.iggpog22.com/mystuff/nogap.png - there is no difference between my
  > star logo and the image header 'Links' in dreamweaver, but that is how
  > I would like it to appear.

  Problems of this kind always requires that we look at the code of the page. There
  easier to diagnose if you post a link to the actual page. Fortunately, I
  has been able to find the URL of the screenshot. What you see is the
  top margin on the paragraph around the links.jpg image. You can fix it
  by changing this:

  <>
  SRC="images/Iggpog22Index/headers/links.jpg".

  To do this:

  <>
  SRC="images/Iggpog22Index/headers/links.jpg".

  Gary