Similar Questions

• DW CS3 problem with images PNG-8 in design mode?

  DW CS3 (build 3481) XP seems to have problems with PNG-8 images, specifically trying to in Design view.

  I had a very simple image that could be exported by Fireworks CS4 as PNG - 8 using 4 colors (no transparency) for a file size tiny less 250 bytes.

  Impossible DW display at all, or even recognize it, reports that it was 0 x 0 in size. I published the page anyway, and he seemed fine in the browser.

  I upped the number of colors to 32, and DW could then view it in Design view in the page, I was working on that.

  I always have problems with the other PNG-8 images. The attached file "temp.jpg" is a screenshot showing the part of the design view in DW.

  The small picture to the left of the banner is "58_certificate_of_discharge.png" (attached), and the largest image below is used as the background of the DIV containing the form, (also enclosed) "compassbk.png".

  These pictures all look well in the browser, but terrible in DW.

  I'm puzzled as to why.

  Thanks in advance.

  I think I can say that if this is a problem with the CS3 version, you're stuck with it.  I have never known Adobe/Macromedia to patch a version, once a newer version has been released.  I saw no problem with the PNG 8-bit, 4 colors seen in CS4, I created, and I guess that would apply also to the other variations of your.

• Inspiron 1525 - problems with image restore factory (need help!)

  Hi all
   
  I have a problem with my Dell Inspiron 1525, I can not solve... so please help me!
   
  My Windows Vista Home Edition crashed while installing an update and now could not start more (I always get this bad blue screen during startup), so I would like to repair my laptop using the Dell factory image.
   
  I'm doing... .with related problems
   
  1. I press F8 during startup, but there is no entry "Dell factory image restore" or something like that (I even tried each one entry but nothing factory imagine restoration).
   
  2. by starting with a Ubuntu live cd, I can see that there is a partition that contains (among other files and folders) that image (:\dell\image\factory.wim) and a Tools folder where there are files imagex.exe and pcrestore.exe
   
  3 one... Using a pen drive usb bootable containing a bootable back version, I Prime the system. I also put in the usb pen, ntfspro.exe in order to read the ntfs partition
  b. I went in D:\Tools and run this command:
  > PCRestore.exe --> but I received an error message indicating that this program cannot be run in dos mode
  c. so I tried this other person (I've read here in the Forum):

  > imagex/apply c:\dell\image\factory.wim 1 c:\ --> but I got the same error as above, it is impossible to run this program in dos mode

   

  4. in addition (and I think it's weird), I tried to boot with the dvd operating system shipped by Dell with the laptop: loading at startup of Windows, but just after the progress bar (green) appears at the bottom of the screen, it blocks showing again this bad blue screen!

   

   

  Now I don't know what I can do!

   

   

  .. .Please help me!

   

  Is there a way to restore the laptop with the Dell factory image?

   

  Thank you

  Orlando

  orlando1,

  Thank you for using the Dell Community Forum.

  When you press F8 and the menu, choose the option which reads 'Repair your computer' and follow the menu to restore the system.
  

  This utility formats the partition of hard drive to the operating system before you restore the original image. This means data on that partition is deleted and cannot be retrieved.

  If you create a second partition with a third-party utility, Dell Factory Image Restore remains unchanged until the partition of the image is not deleted.

• Hello I have problem with my site, and mozilla. Google chrome, safari, explorer, opera work ok. Mozilla Heve problem with images?

  Hello I have problem with my site, and mozilla. Google chrome, safari, explorer, opera work ok. I have Sobipro for both the company and the logos and images without work!
  When I try to open the url is this:http://www.athens-dayandnight.gr/images/sobipro/entries/288/587_img.jpg

  whith mozilla is the following: /images/sobipro/entries\288\587_img.jpg when ichange it------with this / work.

  any idea?

  Thank you

  Hello, the URLS that contain-in their path are not valid. Firefox is less tolerant to errors in this respect than other browsers.
  Correct the path to http://www.athens-dayandnight.gr/images/sobipro/entries/288/587_img.jpg in the source code of this site or if you don't control the contact of the site their webadmin to do...

• Mozilla is aware of the problem with protected in Flash Mode?

  Today I started to have problems to view integrated in Firefox 12 Flash content. I tried all the usual steps (for example to clear cache, disable extensions, update the plugin and then finally of this update to Firefox 13) but nothing worked.

  Then I found an Adobe forum which some contributors have experienced the same thing in the last days, and it seems to have had a problem with the Protected Mode in the latest version of the Flash player. I disabled this mode and everything now works perfectly again - so I thought I would bring it to your attention in case others have the same problem.

  The Adobe support article is here: http://forums.adobe.com/thread/1018071?tstart=0

  Hope you find it useful...

  Thank you, cor - el. Hope there is a fix before long, otherwise it doesn't seem to be that much interest in the application Adobe mode protected in the first place!

• M30X: Problem with standby and hibernation modes

  Hello

  In my M30x, I configured my laptop to Hibernate when near the lid. However, when I turn on the computer after this hibernation, there is a problem with the sound settings - I cannot play any music or cannot use a microphone outside, unless I reboot. If reboot is required, then there is no sense to use this feature of hibernation. Also, sometimes after these Awakenings (turn on after hibernation) my mouse (touchpad) spontaneously turns off. This happens when I plug my pc on TV, then come back and close the cover. There someone experiencing similar problems and can help me? Thanks in advance

  [Edited by: admin on 8 May 05 08:02]

  Hello

  It is not easy to say what can be the cause of this problem. I very often use the hibernation mode and there is no problem that even several applications are open. You have this problem only if the device is connected to the TV or every time after hibernation mode?

  It will also be interesting to know if this occurs after each process of awakening or first several modes of hibernation.

• Pavilion 15 laptop: problems with stop and "standby" mode.

  I upgraded from windows 8.1 for windows 64 bit home 10. I had problems with stop and goes into sleep mode and cannot be resolved, then I reinstalled windows 10. Everything worked fine for a few moments, and then the same problem reappeared. I can't stop or put my PC into sleep mode, unless I have first of all to make a restart. After a reboot, I am able to stop or go to sleep mode without problem. If I try to do either without a restart, the screen goes black and the indicator light remains lit. The only way I can get it to start then press on and hold the power button and force a shutdown down, then press the power button to restart the upward. I have another PC, a wafer think that Lenovox has been upgraded to windows Windows 7 10. This PC work fine with windows 10, no problem at all. It's just the HP Pavilion 15 who has these questions. It makes me crazy.

  Look through the tool of troubleshooting possible solutions here:

  http://support.HP.com/us-en/document/c03383935

• 2015.3 version of first having problems with images DJI OSMO k 4

  The latest version of first Pro CC (2015.3) is to have huge problems with 4 K of my DJI OSMO Zenmuse X 3 images. It meets generic errors when you import the footage in the project, by accepting some clips, but not other apparently at random. It gives my custom built Windows 10 PC errors on low ram and also gives me the same issues on my laptop MSI Ghost Pro. I went down first to the previous version, and there is no problem. I don't know if it's just a problem with the Osmo or 4K in general. Please fix this.

  It is just a forum for users.  You should notify Adobe on the questions below.

  Feature request/Bug Report Form

• Problems with images after the subclips

  Hey there

  Today I woke up to see all subelements, I made my most recent project. Just today, footage looked more pixelated and blurry.

  What might of happened? When I stop the image the quality is exactly as it was before. But when played his more pixelated.

  Some of the images was shot at a lower resolution, but when I put the size of the screen to the appropriate resolution quality always looks bad.

  Would this have something to do with the manufacture of the subitems? Even go back and see the clips that came the subclips: the film is even more 'pixely '.

  Any help appreciated

  @

  Hi pavalanche11,

  Sorry for the problem. If it is fixed?

  Please consider these points for this problem:

  1. it looks in any case related to subitems.

  2 as you mentioned after a break the clips, they look very good, but not the same case playing; It could be linked to the resolution Pause and play in the monitor Panel.

  You can get these settings, either by clicking the exit button in the lower right of the monitor Panel or by right clicking on the items in the monitor Panel.

  3. you also said that you pulled these clips at a lower resolution. By changing the values in the resolution of reading as suggested above, they may work properly.

  Here is the text of pdf help Prelude:

  Some formats are difficult to display in full motion by reason of their high compression or broadband playback. A lower resolution playback faster but at the expense of the quality of the image. This compromise is particularly visible when you view the other H.264 and AVCHD-based codec of the media. Less than full resolution these formats have turned off error correction, and artifacts are common during playback. These artifacts, however, do not appear in the exported media.

  Use separate reading and resolutions of break to better control the monitoring experience. With images high resolution, resolution of the reading to a lower value (for example, 1/4) for smooth playback and the resolution of the break in full. These settings allow you to check the quality of the details of development or the edge when you stop playing. Cleaning put the monitor resolution of reading, stop no resolution.

  

  I hope it helps. Customer feedback is important to us. Continue to write in the case of any confusion.

  Thank you

  Mayjain

• Problem with the input query mode. FRM 41009, 40301

  Hi all
  
  I have a problem with the mode of input query. What can I say, I'm in the mode of input query, and I click on a button. I get the error THAT FRM-41009 displayed.
  
  Now, I've wanted handled. So I created a trigger of error in order to handle the error.
  
  IF ERR_CODE = 41009 THEN
  NULL;
  END IF;
  
  A problem is that when you use the null value, it will not terminate the mode of input query, and then I get frm-40301 error.
  
  Second, it's that I can't use exit_form in a trigger of the error.
  
  I am aware that I can press F4 to exit this mode, but I don't want to do whenever I'm sure I'll get the user complaints.
  
  Another solution would be to put the following code in the trigger when key pressed for each button in the form:
  
  If: system.mode = "ENTER-QUERY" then
  exit_form;
  end if;
  
  But I don't want to reproduce this code in my form.
  
  Please can you give me an idea how to handle this correctly?
  
  Thank you
  Michael
  
  PS: Version of the form = > ORACLE FORMS 10g (Forms [32 bit] Version 10.1.2.3.0)

  I have a problem with the mode of input query. What can I say, I'm in the mode of input query, and I click on a button. I get the error THAT FRM-41009 displayed.

  What is the code in the trigger of your button When-Button-Pressed (WBP)? Maybe you should check to see if the form is in the Mode query in your WBP rather than try and remove the error? In other words, eliminate error - do not delete it. :)

  If you want instead to remove the error, there is a technique to built-ins call restricted to a trigger that does not allow them. Do this by the use of a millisecond zero Timer. For example:

  /* Sample On-Error Trigger */
  DECLARE
    n_err_cd   NUMBER := ERROR_CODE;
    t_on_error TIMER;
    ZERO  NUMBER := 0;
  BEGIN
    IF ( n_err_cd = 41009 ) THEN
      /* Create Timer to execute Exit_Form() */
      /* to Cancel Query-Mode. */
      t_timer := Create_Timer('ON_ERROR', ZERO, NO_REPEAT);
    ELSE
      /* Handle all other errors here... */
    END IF;
  END;
  

  /* Sample When-Timer-Expired Trigger */
  DECLARE
    v_Timer  VARCHAR2(30);
  BEGIN
    v_timer := Get_Application_Property(TIMER_NAME);
  
    IF ( v_timer = 'ON_ERROR' ) THEN
      /* Notice, the timer name is case sensative! */
      Exit_Form;
    END IF;
  END; 
  

  I am aware that I can press F4 to exit this mode, but I don't want to do whenever I'm sure I'll get the user complaints.

  Well, it's just standard features of Oracle Forms. If you switch the Mode request form - you must run a query or cancel the query Mode! This is how it works. Your users need to understand that and accept it - just as they accept the functional also for other programs. ;) Another option would be to add a "Cancel request" button to your form and make it so it is enabled only when the form is placed in Query Mode. Just a thought...

  I personally prefer to prevent the occurrence of an error rather than remove the error. :)
  I hope this helps.
  Craig...

• A problem with Images of great CSS background

  I have two images of great background, placed at the bottom of the page. The problem with the help of the bottom property to position a picture is that browsers that don't have much height will cut upper part of the image (in my case, Santa). Here is the link:

  http://www.holidaymarket2010.com/

  By reducing the height of your browser, you can see what I mean. The image starts at the bottom of the page, so if the screen is not high enough the upper part of the image will be cut off.

  The image must be position at the bottom because the Christmas tree (piled up like a Christmas tree bulbs) is cut down. The background looks fine in most browsers, but there are many portable large screen that have less height than most of the other screens.

  Ideally, I'd like the image to start at the top of the page, as if I had used the top property position my images. So, there's the dilemma. I wonder if anyone knows of the tips of how I could pull this off. In other words, I want to position the image at the bottom of the page, but I want the lower part to be cut, not from the top, if the screen does not have enough height to display the entire image. Any ideas?

  How about you decide your BG image in two separate images, configure a container for each, and you can then position Santa on top.

• Problem with images and text of Kaleidoscope

  Dear reader
  I'm having a problem with the Kaleidoscope of the content in the left column of my Web page. It will align correctly in internet explorer, but I would like it to also align correctly in Opera and Firefox as many people use browsers thise also. Here are links to the screenshots to show you what I mean. The problem is selected in orange.
  http://www.iggpog22.com/mystuff/gap.png - there is a gap between my star logo and the header image 'links '.
  http://www.iggpog22.com/mystuff/nogap.png - there is no difference between my star logo and the 'Links' header image in dreamweaver so that is how I like to view.
  
  If someone could offer some advice, I would be very grateful. I generally try to develop things for me, but this problem has left me speechless. I can also provide the html code is that need you. Thanks again for any response.
  . Sam
  
  Edit
  This is a link to a .rtf file of the code for the Web page
  http://www.iggpog22.com/Mystuff/ig2code.RTF
  You can also visit my Web page at the www.iggpog22.com (I include www. otherwise, it shows the wrong website)
  I hope that's enough to be more useful

  Monday, July 16, 2007 15:42:53 + 0000 (UTC), "02cspearson".
  wrote:

  > http://www.iggpog22.com/mystuff/gap.png - there is a gap between my star
  > logo and the image header 'links '.
  > http://www.iggpog22.com/mystuff/nogap.png - there is no difference between my
  > star logo and the image header 'Links' in dreamweaver, but that is how
  > I would like it to appear.

  Problems of this kind always requires that we look at the code of the page. There
  easier to diagnose if you post a link to the actual page. Fortunately, I
  has been able to find the URL of the screenshot. What you see is the
  top margin on the paragraph around the links.jpg image. You can fix it
  by changing this:

  <>
  SRC="images/Iggpog22Index/headers/links.jpg".

  To do this:

  <>
  SRC="images/Iggpog22Index/headers/links.jpg".

  Gary

• Problems with images in Muse

  We have at any given time 2 or 3 photos on our website that half is cutting.  Go Daddy, we use for our accommodation.  The lower half of the space allocated for the image is gray or white.  We have removed the images several times, that she replaced, re added the same photo, troquee the spaced which image goes where and whenever we have repeat the site 2-3 images are cut.

  Our Muse and BC are perfect, the question is considered only in line on the published site.  It is not always the same place or the affected image, but as soon as we fix one, another Cup.  I am unable to put screenshots here but would be happy to send an email to someone who can help.

  Portfolio

  The link above is to the portfolio page on our site where we had the question.  At that time, upward, stainless steel countertops is cut, 2-3 of the way down the page, the image of cable railings and planter boxes is cut and further down is so the footrest bar. It is meaningless, as soon as fix us an image that another task is assigned.  Once we have removed the pictures and re added, we had images in different places, we used different images - at any given time, there are 2-3 pictures with the bottom half cut.

  Go Daddy told me that our text has been added as an image with brightfield, and our images have been added as a backdrop, background display 'options' not 'image options.  This is not correct, our test is added as text, and we can change it.  Our images are added in the form of images, with "image options.  I'm on the phone with Go Daddy right now (one representing different of course) and they tell me that he could not have told me that they do not have a way to see the 'options' we would.  So I'm really pleading just for anyone who thinks they can help give a shot - please and thank you!

  Cutting on the website photos

  Here is a link when we have asked this question previously but ceased to answers

  As mentioned in the previous post and you mentioned that it works in British Colombia, please provide the url of the BC site too which might help in the investigation.

  Thank you

  Sanjit

• Problems with images and files.

  After a computer no serious crash a few 6 months or so there are certain details applicable to each image below the icons of my photos turned the black normal script in blue and it is only in a few cases, although it doesn't bother me too much and they can be used, can it be reversed as it is annoying? recently, another point when I load more new photos to a new folder, if some require clock or anticlockwise, I sometimes get this notice of refusal, "cannot rotate this image that this file can be used or opened in another program or file or the file may be read-only." but none of this can be good as I just placed it new pictures in this folder. How to correct these problems?

  Hi J MVP, volunteer

  Thank you very much for the information that informed me of the files compressed, I asked several people about what it could be, but nobody seemed to know, your solution worked a treat, I've heard of file compression but has never had the need to use this method at all for a reason, and it was only caused initially by the computer crash.

  To answer your question above, the source of the images are directly from the camera, a Sony DSLR 550, via a USB cable, they are loaded into the computer, directly in a set end folder, there is reason for the type or the date at which the photos were taken, which is located in the folder "my pictures."

  Then I get to work with it on Photoshop, after I saw what I want to keep or discard, it's when I have a few photos activate in order to view properly, this problem only comes to occur for the first time as yesterday.

  At the same time I could turn several photos at once 3 or 4 + at a time, but it will now allow me only to make an at once it does not account for the rest, too, sometimes in the past when I turned a picture turned it the image on the screen but the icon remained impassive (this can happen sometimes at 3 or 4 in a row) When I then performed the same maneuver to the next image in the sequence, the previous icon also then becomes his main image returns to its initial position, but this happens only rarely.

  Only when I turn it dose it then right and eventually become stable, these odd little blips, I put in place with for some time, but this last problem, the fact that I can now have a soft image to look at, but can not turn as the computer says 'No', I must confess a again becomes quite painful.

  I've never confessed to be a computer buff, I want only to work on the photos for me and my pleasure to families and our web site, but when things like this crop up I admit that I have no idea where to start and so the reason I am looking for assistance.

  Thanks much again for all your help.

  Best regards

  Mahoganyoak

  ====================================
  Nice camera...

  OK... with regard to the question of the rotation... I don't know exactly
  answer, but will provide some info that may help you solve
  the question. I'm sorry that the message is so long but here
  is a lot of things that could be involved. I'm sure you
  know your system well enough to forget useless
  steps: o)

  Since you're using Photoshop to rotate your images...
  It is possible that the solution might be found in Photoshop
  Supported.

  Adobe PhotoShop help and Support
  http://www.Adobe.com/support/Photoshop/

  Personally I do not download photos via a USB cable...
  on the one hand, it irrigates the batteries from the camera. But the
  main reason is that corruption can develop in the photos
  If the batteries are low when the download is triggered.
  An example of how this happens download photos
  immediately after a session of photos long when batteries
  are low. I suggest to use an internal or external
  Media Player.

  Given that the question of the rotation recently developed... make one
  Restoration of the system Mode without failure for a time before the
  problem began could be worth a try.

  See the following articles:

  (306084) how to restore Windows XP to a
  previous state
  http://support.Microsoft.com/?kbid=306084

  How to restore a Windows XP system to a previous state using system restore
  http://bertk.MVPs.org/

  (315222) a Description of the Safe Mode
  Boot into Windows XP options
  http://support.Microsoft.com/?kbid=315222

  How to start safe mode in Windows XP
  http://bertk.MVPs.org/html/SafeMode.html

  Also... the regular system maintenance can improve
  some of the issues. Maintenance of sufficient free space on your
  hard drive is also useful. I keep my free to at least 50%.

  Empty your temporary Internet files folder.

  (260897) how to remove the content of the
  Folder Temporary Internet Files
  http://support.Microsoft.com/?kbid=260897

  Run Disk Cleanup, error checking and
  It is a good idea to defragment regularly schedule.

  (310312) description of the disk cleanup
  Tool in Windows XP
  http://support.Microsoft.com/?kbid=310312

  (315265) how to perform disk error checking
  in Windows XP
  http://support.Microsoft.com/?kbid=315265
  (check two boxes... "automatically repair the file.
  System errors' and ' search and try to.
  recovery of bad sectors"), the utility will run
  the next time you restart your computer.
  (run check several times until it finds errors
  no error)

  (314848) how to defragment your drive
  Volumes of disk in Windows XP
  http://support.Microsoft.com/?kbid=314848

  Sometimes Thumbs.db files can be damaged...
  personally, I have remove and disable their creation.

  What is thumbs.db, and can I delete it?
  http://ask-Leo.com/what_is_thumbsdb_and_can_i_delete_it.html

  Shut down Windows to save the cache of thumbnails (THUMBS. DB)
  http://www.annoyances.org/exec/show/article03-204

  What is the thumbs.db file and how it remove?
  http://www.pchell.com/support/thumbsdb.shtml

  Next... it can be interesting to try to run the following command:

  Open an image in Windows Picture and Fax Viewer...

  Hold your Ctrl key and close the Viewer... (X on the title bar)

  You should see a dialog box stating:

  "Any rotation warnings that you have deleted."
  zero prior and can reappear when you
  Rotate an image. »

  Now, you may need to run the following command:

  Reach... Start / run and type
  (or copy and paste):

  regsvr32 /i shimgvw.dll

  (Yes, the space after the 2 and the)
  After the i is necessary)

  Press on... Come in...

  You should see a dialog box stating:
  DllRegisterServer and DllInstall in successful shimgvw.dll
  Try to turn your photos...

  To reset the rotation dialog box... try the following...

  Open an image in Windows Picture and Fax Viewer...

  Hold your Ctrl key and close the Viewer... (X on the title bar)

  You should see a dialog box stating:

  "Any rotation warnings that you have deleted."
  zero prior and can reappear when you
  Rotate an image. »

  Now, you may need to run the following command:

  Reach... Start / run and type
  (or copy and paste):

  "" REGSVR32 SHIMGVW. "." DLL.
  (without the quotes) (Yes, it is)
  a space between 2 and S)

  Click on... Ok.

  A dialog box should include the following:

  "DllRegisterServer in SHIMGVW. DLL succeeded.

  Try to turn your photos...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• problems with images in dreamweaver

  If dreamweaver cc

  - I can ' drag my image of local files on screen, which is funny because because I could do without problem 30 minutes ago just suddenly I can't do more

  -Second, now I have to I do with the Insert menu, but I can't chance size you with my mouse, and insert the number of W & H is not the same thing.

  -also, everyone figured out an easy way to center an image?

  thanx

  You are in Live View mode by accident?

  Switch to the Design mode. The editor in Live mode, while better than it was when it was introduced, not still not all the functions of the Design view. In your toolbar, click the triangle next to Live and choose Design. This will give you the ability to change size by dragging the corners of selected images...