CS4/5 installation on the new laptop without disc?

Similar Questions

• CS4 programs transferred to the new laptop

  The laptop on that initially charged Suite CS4 dead. Bought a new laptop at Micro Center. They transferred programs and data in the new laptop. I tried to use Photoshop and DreamWeaver, but get the error code 147,20.

  Micro Center told to contact Adobe.

  I bought CS4 Suite while studying at JCCC 5 years. What do need me to get the program to work on my laptop replacement?

  You must install the software, transfer does not work well.  You will need the serial number of your purchase to activate the software after installation.  You need floppies installation of your purchase, in order to install, and if you don't have the disks, then you can download the trial through the page linked below.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS3 and CS4:

  http://prodesigntools.com/download-Adobe-CS4-and-CS3-free-trials-here.html

  You may have disabled original activation, especially the case if you had it installed on more than one machine.  To do that you must contact Adobe technical support directly through chat or by phone.

  Here is a link to a page with options to help make contact:

  http://www.Adobe.com/support/download-install/supportinfo/

• Bought a new laptop without disc drive - how to install Photoshop Elements 6?

  I bought a new HP laptop without a hard drive.  I have Photoshop Elements 6 - How do I install it or I have to buy a newer version of the software to install?

  These are the only available via adobe installation files.
  

  
  

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | 9,8 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6.1.1 . 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14 | 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14 | 13 | 12 | 11, 10 |8 mac | 7 mac

    Download and installation help links Adobe

    Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  • Why can my new installation on the new laptop I register not correctly on my account?

    I downloaded and installed Photoshop on my new pc.  I have connected to my Adobe account and - of course - disconnected all previous installation on both old 2 PC, but every time I start using PS a window pops up saying that the trial period is over and ask me to access and connect to my account.

    What is the problem? (my annual subscription is of course still running...)

    Check your account indicates the subscriptions that you expect (and that the adobe, used in the next step id is correct) by logging in here and checking the status of your subscription, https://www.adobe.com/account.html

    then, if it's current, disconnect and then back to your client application using the adobe with the link above in cc id: http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  • New CS6 on the new IMAC without disc

    New IMAC doesn't have a CD player. Ordered CS6 new but cannot load it, I can support from Adobe using the key (SN) in the CD box?

    All the CS 6 downloads are available as trial downloads on the Adobe.com site.

    Depending on the product you purchased, you can download the trial version on the Adobe site and then can install and serialize the same using the serial number that you received.

  • How can I configure outlook express electronic mail on the new laptop, even as this computer

    I tried to implement the same e-mail I have on this computer, on the new laptop without success

    See here: http://www.insideoe.com/backup/clone.htm and www.oehelp.com/backup.aspx

    You have to reenter your password, but if not, it should be the same.

    Steve

  • Problem with CS6 installing on the new laptop - 'SN is ok, but your software is probably illegal.

    I have an urgent problem with the Suite Design Standard CS6 installation on the new laptop - comment: "SN is ok, but your software is probably illegal". Software has been disabled on the old laptop. Help, please. Thank you. Marek

    We cannot help with this type of problem on the forums. Serila number questions should be handled by the customer service: Customer Contact

  • Try to install InDesign CS5.5 on a new laptop without a CD ROM installation wants a drive only; does not recognize a flash drive. What should I do?

    Try to install InDesign CS5.5 on a new laptop without a CD ROM installation wants a drive only; does not recognize a flash drive. What should I do?

    I didn't come across this link, so I tried to copy the desktop flash player and installed it from there. Thank you, in any case.

    Sent from my Verizon Wireless 4 G LTE smartphone

  • I want to install my office small business 2003 on my new laptop but can't find the installation cd. I have all the license information. Can Microsoft help me to make it work on the new laptop? Thank you.

    I want to install my office small business 2003 on my new laptop but can't find the installation cd.  I have all the license information.  Can Microsoft help me to make it work on the new laptop?  Thank you.

    http://support.Microsoft.com/default.aspx/KB/326246

    'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

    See you soon. Mick Murphy - Microsoft partner

  • Installation upgrade memory in the new laptop (E8730w)

    I just got my new laptop and was dismayed to see that I obviously have to install the 2 GB memory upgrade that I ordered.  When I'm ready to install it, I will contact HP technical support.  I'm interested in the big picture right now.  The laptop has installed Windows Xp and Vista, stored on the hard drive.  No matter if I use the new laptop for, say, from the user's manual before as I have added additional memory, or is it better not to use the laptop until I have all of the memory (2 GB original and 2 GB upgrade) in place.  I hope that this process will be no more complicated than to install an ethernet card in a years office 5 or 6.  Where can I get good screwdriver to open the module compartment memory?  From my experience, it is easy band, the head of a screw phillips, especially a small head, if there is no appropriate screwdriver.  I'd appreciate any idea on these issues.

    I don't think that no matter how long you use it before you install the memory. Regarding the screwdriver, I use a 41678 artisan to work on laptops with screws Phillips. It could cost $ 1.69 at any Sears and any tech tools for perhaps $15 will be a very similar small Phillips. You will know if you are stripping it, so stop everything. Memory installation is much easier than to put a PCI on a desk. Relax its all good.

  • Installation of the elements on the new laptop 10

    Already had 10 items on old laptop which is dead - still have the serial number, but how do I install it on the new laptop to Windows 8?

    Hi Michael,

    You can download 10 items of direct download links available at: http://prodesigntools.com/photoshop-elements-10-direct-download-links-pse-premiere-pre.htm l

    But make sure you follow the steps mentioned on the page before you start the download.

  • Working Group stopped after the installation of the new wireless router

    My working group stopped working after the installation of the new wireless router.  Router was switched were to move from DSL to fiber optic.

    I have a very simple home with two laptops working group, the two are connected with a wireless router.  A PC is running XP with the updates and service packs; the other PC is Windows 7 Home premium.  This working group was running without problems for a few years.  The Working Group has been used to share files between two laptops.  Internet access was through the DSL wireless router and print was with a wireless printer, without going through the working group.

    I had my DSL set out to free fiber optic last week, which meant that a new wireless router has been installed by my local phone company.  Internet works fine; wireless printer works.  The working group no longer works.  When I try to connect from XP to Win7 and I click on mode workgroup computers, I get this message:

    WorkGroupName is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.

    The network path was not found.

    I tried to create a new working group, the new name for the same workgroup on both machines, but this did not help.  Working groups are supposed to be simple; This seems to be a problem on the new router - telco tech support says that nothing is stuck on the router. I don't believe them.

    What version of XP you use (Home or Pro)?

    Can you access the Win 7 a XP computer?

    You have identical accounts, passwords on both computers?

    If all that was done was to change routers without making any changes on the computers, the most likely cause of the problem is a third party (other than Windows) firewall on at least one of the computers.  Being by default, a router automatically assigns IP addresses to computers on your local network.  Different brands of routers, but use different address ranges.  For example, Cisco/Linksys routers typically use the 192.168 form addresses. 1.1 with 192.168. 1. 254, while the D-Link routers typically use 192.168.1 to 192.168.0.0. 254.  A firewall configured to allow only the first IP range blocks communication to the scope of the latter.

    So... What is the name and version of your anti-virus program?
    What other security software is installed?

    On every laptop computer, open a command prompt window
    for XP: start > run > cmd > OK
    for Win 7: type cmd.exe in the search box and press enter
    In the black command prompt window, type the following command and press enter
    ipconfig

    Please provide the values for the following for the adapter wireless of each computer
    IP (XP)
    IPv4 address (Win 7)
    Default gateway

  • Had to install XP Pro in one folder other than the Windows folder. Can I delete the new folder without causing problems?

    I was cleaning some ad/bad/spyware on the computer of a friend. It runs XP Media Center 2005. When I restarted it, it wanted a password. He put never, ever. The only work around was to reinstall XP without deleting any of his files (more than 8000 music files) because it is not anything save. I put the new XP in a different folder, I named. After searching around, all of his stuff is there and I can access, but this new folder is take a LOT of resources/mem. There is almost nothing in this record, I can delete the new folder without compromising each other, installation? I think I would need to get rid of mode safe mode with command prompt. I did it so many times, but it's never happened to me. Help!

    Once you get the drive installed, simply use xcopy or Robocopy to copy the files, with a fairly large music 8000 drop these command-line utility will be faster than to try to copy them through the Windows Explorer GUI.  Xcopy is integrated with Windows XP, Robocopy is available for download from Microsoft.

    John

  • Cursor not moving/working after the installation of the new keyboard

    I just finished replacing the keyboard on my HP G72 due to spill water on the keyboard a few days ago & some keys no longer work after laptop parched. However, I find that things are not as they should because I can't get the cursor to move. I do not use a mouse & rely on the touchpad. I tried to remove the keyboard & reinstall several times but all about no. avail & wonder if anyone can give me some advice, even if it is the keyboard itself may be defective & I need to buy a new one. I don't want to just assume there is a problem with this new keyboard only to discover that the problem is somewhere else & that there is other things I should be doing or trying.

    I had to install a new keyboard on this computer laptop sometimes last year afer having a similar accident with the flow of the water, but the installation of the new time was pretty much a piece of cake, I followed the guides on the screen, I have been looking & everything was perfect, once I had installed the new keyboard.

    Thank you if you can advise.

    Hello

    If possible, try a USB mouse for awhile. This way if the slider works, you can try reinstalling the drivers for the touchpad that could solve the problem. If the cursor does not work with an external mouse also then the problem could be hardware related.

    Sometimes to repeat the installation process of the keyboard all over again also helps.

  • never had a disc of windows vista with the new laptop and no option to make a recovery disk, and I need to format my laptop to factory / clean, help!

    never had a disc of windows vista with the new laptop and no option to make a recovery disk, and I need to format my laptop to factory / clean, help!

    How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

    There is no Vista free download legal available.

    Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

    Normally, they do this for a cost of $ small.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

    See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

    Normally, you have to press F10 or F11 at startup to start the recovery process...

    Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

    They will tell you how to do this.

    Every computer manufacturer has their way of doing recovery disk/s.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
    A good Vista DVD contains all versions of Vista.
    The product key determines which version of Vista is installed.

    There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

    If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

    http://support.Microsoft.com/default.aspx/KB/918884

    MS advice on the conduct of clean install.

    http://www.theeldergeekvista.com/vista_clean_installation.htm

    A tutorial on the use of a clean install

    http://www.winsupersite.com/showcase/winvista_install_03.asp

    Super Guide Windows Vista Installation

    After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

    Save all data, because it will be lost during a clean installation.

    See you soon.

    Mick Murphy - Microsoft partner