Similar Questions

• Dreamweaver CC 2015, model update fails after several attempts

  Hello

  I've read similar posts in the forum but could not seem to find a definitive answer.

  Here's what's happening.

  When I try to update the TPL, it works very well for the first time several. It will update all files on the site.

  However it stops working after several attempts to update. The Update window crashes after update the first bit of html files and the rest never gets updated.

  I tried the "recreating Cache of the Site" but not luck.

  My solution is to stop DW and restart again, and then it works again, but only for the first several times as I explained.

  It is such a pain in the * when I need to update the site frequently.

  BTW, this happens not only for a particular site, but for all the sites that I created on DW.

  I'm using DreamweaverCC2015 on Mac OSX 10.10.5

  Thanks in advance.

  Have you tried to clear the cache of program?

  It is not identical to the function of the site cache recreate and tends to clear up many weird questions "just started to happen."

  Turn on your operating systems hidden files and try this: removing a corrupt cache file

• After updating my OS to iPad 2 to the last iOS 9 on March 22, 2016, I get the message below after several attempts to turn on my iPad: "your iPad could not be activated because the activation server is temporaril."

  After updating my OS to iPad 2 to the last iOS 9 on March 22, 2016, I get the message below after several attempts to turn on my iPad:

  "Your iPad could not be activated because the activation server is temporarily unavailable. Try to connect your iPad to iTunes to activate it, or try again in a few minutes. If the problem persists, contact Apple Support at apple.com/support. »

  I am based in Lagos in Nigeria and can't seem to find any Support from Apple for my country on the web. Please urgent help because I can not access my iPad. Thank you.

  How did you get the update? via iTunes or ios

• After several years, all of a sudden my Photoshop CS wants to reactivate, otherwise the product is worthless.  All right, I got the activation code, but nowhere to put it!  Help!

  After several years, all of a sudden my Photoshop CS wants to reactivate, otherwise the product is worthless.  All right, I got the activation code, but nowhere to put it!  Help!

  I guess you run Photoshop CS2 or more?

• Windows Activation failed after years of work

  Hello.

  I bought my laptop 3 years ago. There were license version installed Windows (all stickers have been in their place). Over the years I did the regular system updates. I did re-install Windows. Has no repair of the laptop. ' ' But 23.12.12 after the regular update of the system told me that my version of Windows is not allowed - my product key "is used on another laptop or has been blocked by Microsoft. When I tried to enter the key again (as suggested by web page), he said that the key was not for Windows 7 Max.

  Sorry for the quotes - Windows is in Russian.

  This seems to be the code for Win 7 Pro, as expected - that explains why the system does not accept the key.

  The probability is that the vondor deliberately obfuscated Version/edition data, knowing that they would be missing for a long time until the system has shown as non-authentique, and that they would get a higher price for a ultimate a Pro machine.

  Or maybe someone has tried to apply an Express upgrade to ultimate using the stolen key.

  In both cases, the necessary of Loader fails after an update (possibly SP1) removed some of its changes.

  You will either need to reformat and reinstall Pro, or purchase a license full for Windows7 and exchange the key in (I could not recommend trying a direct upgrade to Win8 without knowing a lot more on the system)

• Problem CS4 activation - activation server is down

  We have a key to upgrade to CS4 and a wedge of CS2, when we install CS4 and trying to turn it on, it recognizes not the CS2 key more because according to an Adobe employee on the live chat, the activation server is down and they are not willing to offer alternatives to activate the software. The only suggestion of an Adobe employee had had to go on the forums and someone will be able to provide a work around for CS4 activation, please advise.

  I don't know if it will work, but you could go get the special serial number for your product CS2 and enter that... but since it's a special number, it may not work

  Error: "Activation Server is not available. CS2, Acrobat 7, pass a hearing 3

• Computer Acer laptop failed after Vista SP1 update

  original title: computer Acer laptop failed after Vista SP1 update - help!

  I accepted an update from Microsoft for Vista SP1 on my Acer 5920 laptop. After re-boot to complete the update, the Acer is no longer wakes up. What happened and how I can fix itplease?

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Bootcamp update fails after El capitan (please help me alone!)

  Hello

  I think I have the same problem postedBootcamp update fails after Yosemite (please help me alone!)

  But like the other user, I'm a little scared, and I don't want to lose my Bootcamp partition.

  That's why I ask you to help for solitaire (thank you much in advance).

  I upgraded my MacBook Pro 13 "(mi-2010) at El Capitan 10.11.5."

  Then I noticed that I could not find Bootcamp.

  Regarding the other question, the score was still there, but now under the name "disk0s4".

  I used Testdisk, following the advice, and I discovered the missing partion and data (I could make a copy)

  Now, I would be sure to make the right steps to retrieve the situation.

  Here is the output of Testdisk

  

  

  The partition does highlight is the right one, here's where I found my data.

  

  Now, what I'm supposed to do is follow the same steps that I read in the old post with 508484288 to step 7 and + 468284272 in step 8, in this way:

  GPT4 to rebuild using start/end offsets

  1. Sudo gdisk/dev/rdisk0
  2. P (print the complete list of parts)
  3. D (delete)
  4. 4 (part 4)
  5. N (new part)
  6. 4 (part 4)
  7. 508484288 (-start offset in the sectors or the starting point for the Bootcamp part)
  8. + 468284272 (-size offset, rather than the end offset)
  9. 0700 (part of Windows type)
  10. P (list of all parties just to see what changes will be)
  11. W (Write the new GPT)
  12. Y (Yes! really write the new GPT)

  And then I need to rebuild the MBR (as the old post)

  1. Sudo gdisk/dev/rdisk0
  2. P (print from parts list)
  3. R (Recover)
  4. O (current MBR hybrid in block letters)
  5. H (chooses hybrid)
  6. Partitioning numbers be hybridized: 2 3 4
  7. Y (good for the GRUB question)
  8. (Indicator boot part 2) N
  9. N (part 3-flag of boot)
  10. Y (boot indicator part 4 make the bootable NTFS partition)
  11. O (current MBR hybrid in block letters)
  12. W (Write new MBR)
  13. Y (yes! write the new MBR)
  14. Reset

  I'm sure I'm in the right direction, but...

  Many thanks for any help

  Excellent work. The two sets of Gdisk steps are correct. If you are on El Capitan, these two sets of measures Gdisk will fail because of the Protection of the integrity of system being activated. Please disable SIP.

  1. boot in local restoration (command-R).

  2. start utility-> Terminal.

  3. type csrutil disable in the Terminal, and then press enter/return.

  4. type csrutil State.

  5 start normally, then type csrutil status to confirm that all of the individual entries are still disabled.

• Word is no longer in my programs after several reboot this morning

  original title: Word is no longer listed in my programs after several reboot this morning - SEE Add ' l COMMENT ADDED at the END of

  I typed in the search box and the open program winword, but now how do I add it to my startup (and to see it reported once more as an active program)?

  My PC is Windows XP - I think that it's the home edition.  Word 2003.   I started my computer this morning after having been turned off during the weekend and it was very slow.  Safely, I rebooted twice but no difference - then did two tough stops.  Norton 360 (no problem popped up) and restarted the computer.  Everything worked fine until I went to start a new Word document.

  I tried to do a system restore but it says that no changes have been made to my computer.  But I know that's not true!

  Help!

  MORE: I have now called Microsoft Word Viewer, I've never seen before.  Thanks again.

  Word Viewer is (probably) the application from Microsoft which allows you to view documents created with newer versions of Word (Word 2007 and Word 2010).  In general, they are saved as files instead of.doc, *.docx files.

  You can create a shortcut on the desktop to the Word as follows:

  • Right click on a box empty the desktop and select new > shortcut
  • Click the Browse button and locate winword.exe, which for Word 2003, should be in
  • C:\Program Files\Microsoft Office\OFFICE11
  • Click next
  • In the 'Name' box, replace Winword.exe with Word (or whatever you like)
  • Click on finish

  If you also want an entry in the start menu > all programs list.

  • Click the Start button, and then select open all users
  • Double-click the "Programs" folder
  • Right-click and drag the shortcut on the desktop that you created in the folder open ' programs' and select 'Copy here' in the context menu

• CD/DVD on Satellite U500 drive failed after installing Windows 10

  My CARPET * drive dvd DVD - RAM UJ862AS failed after W10.

  I told myself I need Toshiba ' * 86 device ACPI Compliant added logic and general use "BEFORE I can install the driver for the DVD drive.
  I tried Microsoft idea to remove the pilot of regedit and restart the laptop that should logically result in reinstalling the driver... with no luck.

  I'm about to give up the laptop but am wondering if anyone can help me?

  I am extremely reluctant to lose a lot of money on several unnecessary drivers (generally unreliable) providers!

  U500 is old piece of hardware and not supported for Win10, right?

  In any case, what is the status in Device Manager? Is ODD listed here or you just entered with device "unknown"?

• FireSight/User Agent Error: [2201] - login information from IP to IP report failed after TIME [a call to SSPI failed, see inner exception.]

  We have a system of FireSight with a version 5.4.0.5 Virtual Data Center and several ASA devices. We have set some user Agents for the session and closing of session servers MS AD user logon information and met 2 problems:

  (1) all servers user agent (Windows server 2008R2/64/SP1 and Windows server 2012R2) report error 2201. They can pull the AD server logon information correctly and export the correct user card, can communicate with the virtual data center, but just cannot send data to it. Meanwhile, a user on the Windows 2008 STD/SP2 Server Agent works perfectly. Have you tried 3 other servers, 2 versions of the User Agent, en - us locale and 2 versions of .net. Nothing has changed.

  (2) we prefer to have only 1 User Agent but 1 User Agent supports 5 servers DC Max. We set up a central AD server to register the security logs of all servers of ads with success to his 'Reported events' event log file and set the User Agent to extract data from this central AD server. User Agent shoots the opening session, but only events folder "Windows Logs - security", never "reported events." The User Agent is designed from "Windows Logs - Security" read-only?

  2201.gif

  

  [2201] - report of the login information of the USER-AGENT-SERVER to 10.xx.xx.xx failed after the 14/07/2016 09:08:55. [A call to the SSPI failed, see inner exception.].

  This problem is known.

  Please uninstall the update from Microsoft

  KB3161606 and KB3161608

  After inspection, the question seems to be a specific change to the default Cipher Suites:

  https://support.Microsoft.com/en-us/KB/3161639

  There is created for this bug.

  https://BST.cloudapps.Cisco.com/bugsearch/bug/CSCva32331

  Rate if helps.

  Yogesh

• Navigation fails after validation

  Hello
  
  I built a form in which I have several tabs (Web tab).
  Different tabs referring to different blocks.
  I use trigger when-tab-page-changed to navigate from one tab to another using go_item('Block.item').
  It works very well.
  
  However, even navigation fails after the update on one of the block or after saving changes to one of the tab.
  Is it possible to find out why go_item() is a failure?
  
  Thank you

  Is your default go_item, or it goes to an element on a page of tabs that is not the topmost_tab_page?

• I forgot my password and got my iphone disabled after several attempts. its display to connect to itunes, but I am unable to connect to itunes too. How can I unlock my phone without losing any data? Help, please

  I forgot my password and got my iphone disabled after several attempts. its display to connect to itunes, but I am unable to connect to itunes too. How can I unlock my phone without losing any data? Help, please

  In short - you can't

  IF you have a computer with iTunes on which you did a prior backup - the phone will be recognized and iTunes offer todo backup before it clears your device - that - except if you know the access code the content cannot be saved

• Toshiba 40L7335D will turn off by itself after several hours of use

  My Toshiba 40L7335D TV periodically turns off by itself!
  Bought a few days, everything else works perfectly during the day, but after several hours of use of the TV is off!

  Is a problem that someone else has or knows?

  Please see the user manual * page 74 *.
  http://www.Toshiba-OM.NET/LCD/PDF/English/L7335-4050-English.PDF

  _Energy saving Settings_
  + The TV automatically turns off (standby) after 4 hours, if you do not use not the TV, either from the remote or the TV Control Panel. +

  and

  _No signal Power Down_
  + TV turns off automatically after 15 minutes when no signal is detected.

• Satellite A10 won't begin until after several removals of battery

  I have a Satellite A10 I bought in 2003. Since I have it, sometimes just does not start. I press the Start button and nothing happens. So, I have to remove the battery and put it back in, then try again. I have to repeat this step up to 6 times before it starts. Sometimes it starts right away, but in most cases I have to go through this procedure. If I ever get the battery completely, same thing. He will start only after trying it several times.

  I figured out that if she had been closed only a few hours ago, it has no problem starting. But in the morning, after having been turned off for 12 hours or more, that's the problem.

  So far it has always started after several tests, but I'm afraid someday he will stay dead. If someone had the same problem and knows if there is help?

  Hello

  In my opinion, there is definitely hardware problem and this behavior is probably defective electronic power responsible. Because of this, I put t believe you can do something to make it better. I recommend you contact the partner of service allowed in your country and explain the situation.

  If you need addresses you will find under http://eu.computers.toshiba-europe.com/ - Support & downloads search for an ASP.

  Good bye