Computer Acer laptop failed after Vista SP1 update

Similar Questions

• Activate vista after failure of computer acer laptop (acer would not out of warranty)

  If anyone can help with this, we would be greatfull. (acer would not out of warranty) installed the hard drive in my office so that we don't lose our data and now vista needs wake-up, but we have not all labels on the laptop with this subject activation key.
  We have received for the purchase of the laptop but how do we get a new key for her.

  Computers/computer, Acer laptop are Vista OEM licenses.

  If Vista was preinstalled on your computer/Laptop(which it did), it is classified as an OEM license and is not transferable.

  The license of Vista OEM is related laptop computer/computer originally installed on and dies with the computer/laptop.
  You cannot transfer it to another computer/laptop.

  See you soon.

  Mick Murphy - Microsoft partner

• I have windows 8 in my computer toshiba laptop. After you set up windows for the updates it says «restoration of the changes...» Impossible to install the important updates'... What do I do?

  I have windows 8 in my computer toshiba laptop. After you set up windows for the updates it says «restoration of the changes...» Impossible to install the important updates'... What do I do?

  Hello

  Please, try the suggestions mentioned here and see if they help you:

  http://www.thewindowsclub.com/failure-configuring-Windows-updates

  Hope this helps, good luck :)

• My computer acer laptop keeps closing after about 5 minutes in standby mode. Is it possible to fix this?

  My computer acer laptop keeps closing after about 5 minutes in standby mode.  Is it possible to fix this.

  Original title: power shutdpwn

  Hello

  Have you checked your power options?

  http://www.thewindowsclub.com/configure-power-plan-Windows-8

• How to format computer acer laptop?

  How to format computer acer laptop? Had only "backup" acer erecovery discs and no original cd of vista when I bought my laptop.

  My phone is updated with all microsoft updates before that. Problem occurs when I got the blue screen. I rebooted and then I had a black screen with blinking cursor after the "PRESS F2 TO enter SETUP". Downloaded the neosmart vista recovery disk but no help. Startup Repair does not work and I also tried "restore from a good starting point" to end up having the same screen with the cursor. "

  Recovery disc neosmart vista I tried to spend in the command prompt and run a virus cleaner and it detected TDSSMBR. SM as a virus in the partition c: and cleaned. After that I tried restarted and after the "PRESS F2 TO enter SETUP" had a black screen then "missing operating system".

  I tried using "neosmart vista recovery disc" and execute "Startup Repair" and it detected problems and that fixed it. Then restarted and even a black screen with "missing operating system".

  Then I got my "acer e-recovery of a disk" and reinstall to factory settings. I noticed that it is installed in 2 disc/directory partition.  Once this was done, I rebooted and got the same black screen "missing operating system".

  Then you can someone pls let me know how I format my computer acer laptop (detailed instructions please) as I am not very irritable of mind.  All I have is the "acer erecovery discs. Once I have the format that I can use the "acer erecovery discs' reinstall to factory setting? By the way, my laptop has 2 hard drives, or at least I think that it doesn't. C: and the other e: is there a way to check wherether I have 2 hard drives or only one. Vista has been on the c:
  Thank you

  How to format computer acer laptop? Had only "backup" acer erecovery discs and no original cd of vista when I bought my laptop.

  My phone is updated with all microsoft updates before that. Problem occurs when I got the blue screen. I rebooted and then I had a black screen with blinking cursor after the "PRESS F2 TO enter SETUP". Downloaded the neosmart vista recovery disk but no help. Startup Repair does not work and I also tried "restore from a good starting point" to end up having the same screen with the cursor. "

  Recovery disc neosmart vista I tried to spend in the command prompt and run a virus cleaner and it detected TDSSMBR. SM as a virus in the partition c: and cleaned. After that I tried restarted and after the "PRESS F2 TO enter SETUP" had a black screen then "missing operating system".

  I tried using "neosmart vista recovery disc" and execute "Startup Repair" and it detected problems and that fixed it. Then restarted and even a black screen with "missing operating system".

  Then I got my "acer e-recovery of a disk" and reinstall to factory settings. I noticed that it is installed in 2 disc/directory partition.  Once this was done, I rebooted and got the same black screen "missing operating system".

  Then you can someone pls let me know how I format my computer acer laptop (detailed instructions please) as I am not very irritable of mind.  All I have is the "acer erecovery discs. Once I have the format that I can use the "acer erecovery discs' reinstall to factory setting? By the way, my laptop has 2 hard drives, or at least I think that it doesn't. C: and the other e: is there a way to check wherether I have 2 hard drives or only one. Vista has been on the c:
  Thank you

  Hé neww

  NeoSmart disk is to startup etc repair not reinstall

  the process of acer administers the process of full recovery to the standards of the factory

  you start from the acer recovery disk to start a reinstallation of vista, back to factory standards and follow the prompts

  problem with the acer recovery process, you will need to contact acer

  It's their recovery process

  http://www.Acer.com/worldwide/support/index.htm

  Walter, the time zone traveller

• I have windows7 64 bit on a computer acer laptop, but I want to change my OS to 32-bit. Is it possible with the same product key?

  Windows 7 64 bit to 32 bit

  I have windows7 64-bit with the computer acer laptop, but I want to change to 32 bit can it is possible with the same product key?

  If you have a retail version of Windows 7, then it is more than likely came with discs both 64-bit and 32-bit. In this case, boot from the 32-bit disk and do a clean install.

  If the 64-bit version has been pre-installed, then you need to contact Acer to see if they have a 32-bit recovery disc.

• I recently gave a computer acer laptop and you want to change the property

  I recently had a computer acer laptop and the old name of the owner is always on it, how do I change it without losing anything please?

  If I had been given or bought a second system of the user, the first thing I would do is a destructive restore as long as the plant, that way you have a clean box system

• I bought my computer acer laptop 2 months there is the approval to upgrade? (United Kingdom)

  I bought my computer acer laptop 2 months there is the approval to upgrade? (United Kingdom)

  http://Windows.Microsoft.com/en-GB/Windows/upgrade-offer

• My computer will not download windows vista sp1

  I tried the update of windows vista sp1, and it continues to fail. I even tried manually upgrade and still nothing. I recently bought an external hard drive and I thought that I formatted it to my pc and mac. Well my pc does not recognize it because sp1 is not installed. I can't yet do a clean restore and download windows vista because I don't have the CD. Is there anything I can do to receive sp1. I see that many people have had this problem.

  Hello

  How have you tried to manually install SP1?

  SP1, SP2, and then should be installed years ago

  ___________________________________________________________

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you which SP you have installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  @@@@@@@@@@@@@@@@@@@@@@@@@@

  To reinstall Vista.

  You can contact your computer manufacturer and ask them to send you a set of recovery discs, IF it is still available.

  They should do this for a small fee.

  ___________________________________

  And if you have never received a recovery disk when you bought your computer, there should be a recovery on the drive Partition hard reinstall Windows how much you bought your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Them or us ask the right sequence of key.

  ___________________________________

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  ___________________________________

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Acer laptop comes with Vista and upgraded to Windows 7 now does not

  My daughter has an Acer laptop and her boyfriend spoke to him in switching to Windows 7, but we are not sure if it was legitimate. He worked for a year or so, but now she cannot access the start menu, you cannot start in safe mode and may have a virus. She has no backup discs. Any help would be greatly appreciated, thank you.

  Well, if she worked for a year, then it is probably quite legitimate. Whatever this is not activated within 30 days is usually made in an unusable state, or limited. The most likely problem is a virus. She is able to run programs? Some useful malware removal tools are:

  Kaspersky Virus Removal Tool
  Malwarebytes
  SUPERAntiSpyware
  Spybot Search and Destroy
  Microsoft safety scanner

  And it's not the Windows 7 installation disc that used her boyfriend? If you cannot use these tools or the computer is too slow and does not respond then you can use a Live CD. What you do is start you on a CD or a flash drive in a separate operating system in order to perform analyses of virus on the hard drive. You will need to use another computer with a blank CD burner and imgburn program. Write these two files .iso with imgburn.

  BitDefender Rescue CD
  Kaspersky Rescue Disk

  Turn on the computer. Insert the CD of bitdefender inside her computer. Turn off and turn on and watch directly downstairs or upstairs for command to enter the Boot Manager (usually F12) or BIOS Setup (usually F2). Is there is a Boot Manager button and then you must press the key once in a relationship at the time wherever you turn on the computer. Select this option to boot from CD/DVD.

  Is there is only one button for BIOS, then you will need to manually rearrange the order of boot devices so that the CD/DVD drive is at the top which makes the first boot device.

  When the operating system loads up, make sure that you connected to the internet and update the latest virus definitions. You can then run the scan on the hard drive. After that all viruses are removed, then do you the same thing with the Kaspersky CD. It's just to make sure that all viruses are removed.

  I hope that my explanation was not too difficult to follow.

• Computer screen laptop black after changing user or shutdown.

  I am running Windows Vista Home Premium Service Pack 2 on an Acer Extensa 4420.  I had problems with my laptop screen.  Whenever we try to change user or shut down the computer, the laptop screen does not illuminate.  I tried something I read on the internet, where you remove the battery and unplug the unit and then put the back and reboot and it worked for awhile but is less consistent.

  I am currently using the computer with an external monitor connected.  I downloaded the latest driver for my graphics card and that didn't make a difference.

  Hello

  ·         Since when are you facing the issue?

  ·         Black screen that occurs after that use the button change user, is what happens when the applications for the user you are currently logged as long as.

  ·         Was it all (hardware or software) changes made to the computer until the problem started to occur?

  ·         Does it happen on any user where you spend one?

  ·         Using a VPN connection?

  ·         What type of internet connection you have?

  ·         Who is the manufacturer of the graphics card?

  You can check if the third-party application is causing the problem. To identify which application can be the question originally, to perform a clean boot on your computer. To configure the boot of the computer follow the link below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite x 200 SLi: I lost sound after Vista SP1 installation

  Hello
  I have a Toshiba Satellite x 200 SLi

  After I installed the SP1 of Vista, I just lost sound and even update the audio drivers... I still have several problems such as: sometimes the sound stops, errors, try to display movies... etc...

  Vista tells me that I have Norman for update my drivers but I already have the last avaiable driver on TOSHIBA page.

  Anyone with the same problem?
  No idea how to solve this problem?

  Thank you

  The problem is that Microsoft's Vista SP1 makes trouble. The problem is that not all drivers are compatible and fully supported by SP1.

  I think you have a Realtek audio chip. Perhaps have you check the site Web of Realtek s the latest HD audio driver

  If this doesn't help, then you will have to wait until the new update is available (or you will remove him SP1)

• Code error 1058 and 80070422 in Windows Vista SP1 update

  I use Vista Home premium SP1 and now for a long time, that I was not able to use windows update. Im not sure when or how it started, but when I try to update, it gives the message: 'windows not can find new updates' Code 80070422.  In the Services under administrative tools for windows update description is: and when I try to start the service, it comes with a: Error 1058

  I also tried a few fix by doing a repair.bat I've read here, but when I run the application it (it disappears quickly) it says something about error 1058 so...

  I really hope someone here can help me!

  Best regards...

  Hi DonJazz,

  The most common cause is a computer virus that has disabled the automatic update of Windows, or another service on your computer that is required by Windows Update. If your computer is infected with a virus, you will need to analyze and clean first and then restart these services. While your computer may not be infected with a virus, it is recommended that you follow the steps to search for viruses and then turn on the services.

  To restart in Mode safe and search for possible viruses

  If a virus infects a computer, it often blocks the ability of the computer to run antivirus programs or causes these ineffective programs. Follow these steps to control and eradicate any viruses:

  1. reboot your computer in safe mode. For more information, see start your computer in safe mode .

  2. scan your computer for viruses.

  3. Please see How to get rid of malware for more information on removing the virus programs and malware from your computer

  4. Once you've scanned and removed any viruses, restart your computer.

  For more information about restarting the services required by windows update, please see the link below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070422-80244019-or-8DDD0018

  Hope this information helped you.

  Concerning

  Arona - Microsoft technical support engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Toshiba laptop problem after Gaming/Windows Update.__No solution on the web.

  Hello! I use a Toshiba laptop.

  I was playing a game and windows update popped up!

  He has not yet finished, and my computer turns off. It was late in the night, so I decided to start the computer the next day.

  He will appear with the options
  'Safe Mode '.
  "Safe mode with network.
  "Safe mode with command prompt.
  "Last good known Configuration".
  "Start Windows normally".

  Whichever one I choose Windows XP logo appears, then crashes immediately, restart.

  So I tried to use "do not restart in case of shutdown"

  And the blue screen appears

  "stop: 0x0000007e (0x905c49b8, 0xf792b2b4, 0 x 80000003, 0xf792afb0).

  What is this error? I can't enter safe mode by the way!

  Thanks for your help.

  It's http://support.microsoft.com/kb/330182

  Advanced Troubleshooting use the following methods in the order in which they are presented. Method 1: Make sure that you have enough hard drive firstly space, make sure you have enough hard disk space. The Stop error message can be caused by insufficient disk space.

  If you use safe mode or the Recovery Console to start the computer, delete any unnecessary temporary files, Internet cache files, backup files of stored-program files that contain fragments of disk analysis files (.chk files). Alternatively, you can install Windows XP on another hard drive that has more free space.

  If you cannot start the computer, go to the next method to update the BIOS of the computer.

  For more information on safe mode or the Recovery Console click on the numbers below to view the articles in the Microsoft Knowledge Base:

  315222 (http://support.microsoft.com/kb/315222/) a description of the options to start Windows XP in Safe Mode
  314058 (http://support.Microsoft.com/kb/314058/fr/) Description of the Windows XP Recovery Console

  Method 2: Update the computer BIOS if freeing space on your hard drive has not solved the problem, the BIOS might have to be updated. Use hardware and software vendor contact information items that are listed in the "Références" section to contact the computer manufacturer to obtain the most recent update of the BIOS.

  Note When you update the BIOS, you may have to disable the memory the BIOS options, such as caching or shadowing him, temporarily. Method 3: Disable or update device drivers if you have successfully updated the BIOS and the problem persists, on the computer video card drivers may have to be updated or disabled. Follow these steps to troubleshoot video card drivers:

  1. If a driver is listed by name in the Stop error message, disable or remove that driver.
     • If the error occurs during the startup sequence and the system partition is using the NTFS file system, you may be able to use safe mode to rename or to delete the faulty driver.
     • If the driver is used as part of the procedure of starting the system in safe mode, you must use the Recovery Console to start the computer.
  2. If the Stop error message does not indicate a specific driver, update the video card for the latest drivers.
  3. Disable or remove drivers or services that you recently added.
  4. Check the list of Microsoft hardware compatibility (HCL) to determine if the computer's PCI devices are compatible with Windows XP. For more information about the HCL, see the Microsoft Web site at the following address:
     http://www.Microsoft.com/whdc/hcl/default.mspx (http://www.microsoft.com/whdc/hcl/default.mspx)

  Method 4: Remove unsigned drivers if you have updated the video card drivers and the problem persists, or if you cannot start Windows in safe mode, the problem may be caused by a different driver, not signed. Remove all drivers that are not digitally signed by Microsoft. For more information on how to do this, click on the number below to view the article in the Microsoft Knowledge Base:

  316434 (http://support.microsoft.com/kb/316434/) how to perform advanced clean boot troubleshooting in Windows XP

  Method 5: Remove all third-party drivers, you may be unable to determine which third-party driver causes the error. If removing unsigned drivers does not resolve the problem, try to move all third-party driver to the %Windir%\System32\Drivers folder files to another location. Follow these steps to move the third-party driver files:

  1. Use the Recovery Console to start the computer, or start the computer from a different installation of Windows if you have performed a parallel Windows installation.
  2. Create a temporary folder for the driver files. For example, you can create a c:\DriverTemp .
  3. Move all files that do not have a creation date for Windows XP of the 13/08/2001 to the %Windir%\System32\Drivers folder to the temporary folder you created in step 2.

     Warning If the computer relies on pilots third-party IDE or SCSI controller for correct operation, you must identify those driver files and leave them in the %Windir%\System32\Drivers folder.

  4. Restart the computer.
  5. Continue Windows Setup. You can add the files of the driver to the computer, one at a time to identify the faulty driver.

  Method 6: Remove third-party remote control services if you still have the problem after you use the previous methods and the Stop error message contains the name of the file Win32k.sys instead of a file name of the driver, the problem may be caused by a control program to third distance. To remove the service, use the Recovery Console to start the computer, and then delete the file of control service third-party remote.

  -----------------------------------------------------------------
  You can also try running Windows XP disk you and try the repair utility. Please rate me upward if you find my post helpful. Thank you!

• I can't reinstall my acer built in webcam on my computer acer laptop. can't find it! How can I reinstall?

  I have an acer laptop with windows 7 in there and I tried to get the built in cam sex to work and I uninstalled it and I can't find any and is not in the Recycle Bin. How can I get that back? Is there a site I can go to install it in my programs? my laptop did not come with a disc and the cam was preinstalled. don't know what that I'am do at this point. I presume that Skype will not work without it! =/

  This has been answered in your other thread. It is best to ask in one place, but here is the answer again.

  Go here and find your computer model and download the proper driver...

  http://support.Acer.com/us/en/default.aspx