Word is no longer in my programs after several reboot this morning

Similar Questions

• 4 updates keep the facility several times, but do not appear in Add/Remove programs after a reboot

  Original title: 28/03/14 Windows XP updates wants to keep same installation 4 updated updated on logoff. BUT do not show in Add/Remove programs after a reboot? Thanks.Help please.

  Hi, I know this question is a chopped dead horse more again and again. And thank you for your help. Preparation for April 8, the best I can. You want to change this mess first. Very tight schedule. Don't know if these updates are important. Has been published about 5-7 days ago.

  There are 4 Windows XP updates on my 2004 Sony Vaio wish to logoff (on the stop icon) install. And say sucessfully installed it when I do this on the Windows Update page. But after the restart, the updates below do not appear in the Add/Remove Programs folder. That's why when I logoff, he wants to install on the stop icon again, eating my C drive that has now fallen to 15%... Just enough to defragment. I don't know where to install these files. Need to trash and cleaning of the space. Your help is more appeiciated. Thank you very much.

  

  Security Update for Microsoft .NET Framework 3.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2832411)

  Download size: 0 KB 0 minutes (downloaded; ready to install)
  A security issue has been identified in a Microsoft software product that could affect your system. You can protect your system by installing this update from Microsoft. For a complete list of issues included in this update, see Microsoft Knowledge Base article associated. After you install this update, you may have to restart your system.  Details...

  

  Security Update for Microsoft .NET Framework 3.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2756918)

  Download size: 0 KB 0 minutes (downloaded; ready to install)
  A security issue has been identified that could allow an unauthenticated remote attacker to compromise your system and take control. You can protect your system by installing this update from Microsoft. After you install this update, you may have to restart your system.  Details...

  

  Microsoft .NET Framework 3.5 SP1 and .NET Framework 2.0 SP2 update for Windows Server 2003 and Windows XP x 86 (KB982524)

  Download size: 0 KB 0 minutes (downloaded; ready to install)
  This update solves a set of known issues in Microsoft .NET Framework 3.5 Service Pack 1. After you install this item, you may have to restart your computer.  Details...

  

  Microsoft .NET Framework 3.5 Family Update (KB959209) x 86

  Use them as a guide to repair the problems of .net framework:

  Error code '0x8007066A' when you use the Windows Update Web site or Microsoft Update to install the .net Framework update:
  http://support.Microsoft.com/kb/2507641/

  When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".
  http://support.Microsoft.com/kb/923100

  More information

  http://taurarian.MVPs.org/framework/Net_Framework.htm

• Kuler has disappeared after the update this morning

  Hello

  I use Illustrator CC French vesion. After the update this morning (10/06/2014), I can't find my Kuler platte more... However, I still have access to the web site.

  Thanks for your help!

  Issouf

  Hi Ben,

  Check the Panel "Color Themes". Kuler has been renamed.

  Thank you best regards &,.

  Rambour

• Short cut Thunderbird disappeared after an update this morning after a windiw stated that this shortcut is not found. I can't find where is the executable file. It

  This morning Thunderbird updated itself and a window pops up saying shortcut to thunderbird does not exist. After that I can't find where it is so that I can run.

  Thank you very much. Yes, the problem was exactly the same. Thunderbird executable disappeared after an update. I reinstalled it simply by downloading the configuration file. All my configurations and emails and folders, etc were in place. A great feeling to not lose everything. Again, thank you for your kind reply.

• uninstalled applications, received message: Please wait until the current program has finished uninstalling or one. After several reboots, still same message.

  Original title: 2 numbers do not know if they are related

  I have 2 questions and I don't know if they are related. Several days ago I was doing some cleaning and uninstalling programs to free up space. I don't know what I started with, but it seemed to go ok. However, after all that I've tried to uninstall gave me the message: Please wait until the current program has finished uninstalling or one. I rebooted the computer more than once during this period, but it still says that.

  Then my internet explore has stopped working just for 2 or 3 days. I've been using google chrome to access things, but it is rather slow.
  I ran repeated virus and malware scans my norton security and the microsoft Web site, and all said I am clean.

  Yes, it's windows 7 I appreciate the suggestions, but the problem was that he wouldn't LET me not uninstall anything. He gave me the waiting message please do anything, and he's not missing if I stopped and restarted. Finally, I gave up. I saved my files to my external hardrive and just do a full recovery of the computer. He solved the problem of installed programs and the internet problem explore both, although I hoped it would avoid going that drastic.

• Can not reinstall the CC program after uninstalling (in this case, bridge)

  I uninstalled bridge CC on the advice of a cat Adobe tech support person. (I have a screen shot of the cat).

  Now, I can't reinstall bridge CC. Adobe Application Manager says he is installed and does not offer the ability to reinstall. Grrr.

  Another that wishing for a box where I have complete control, what can I do?

  ~ Jane

  Hi Jeff,

  After 3-4 days, the other apps has had an update. After the update, all of a sudden I could install bridge CC. Go figure. But it's working now.

  Uninstall and reinstall is not obvious or easy with Creative cloud, and I was hoping for the boxed version where I had control over things like this unstead of spending hours doing Google searches and chatting with technical support. I had not activated the software or even he launched before uninstalling.

  As I said, it works now. But it must be an easier process!

• With the help of v22.0 cannot apply update - will not even after several reboots - advice?

  bold text

  Hello

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

  Thank you.

• Brand new EA4500 - no strip of 5 GHz after several reboots?

  Hello

  I set up my new EA4500 last night and set up the bands 5 GHz and 2.4 Ghz with separate SSID (as recommended). While I can see the 2.4 Ghz band with all my devices, I don't see the band 5 GHz with any of them.

  I followed the advice given (including the display settings) on the EA4500 FAQ:

  Title: Customization and connection to the 5 GHz band wireless on a Linksys Wireless-N Router
  Article ID: 21466

  The references to the article that "If your wireless 5 GHz network is not listed, try to unplug the power cord from your router and then reconnect it after 10 seconds."

  Do that * many * times and still nothing. I have a capable dual-band adapter Netgear RangeMax WNDA3100 Dual Band Wireless-N adapter, I know works on 5 GHz (because I had to work on my old WDNR3700v1 dual-band). Similarly, I have PC seated less than 20 feet away who have previously been able to see the band 5 GHz on my old router, but are now unable to see it on the EA4500.

  Is this a known issue? There is no update available firmware, so I am at a loss. Hate to have to return after a day...

  Thank you
  -Bn

  Try to configure a unique SSID on the 5 GHz, without wire - only band. no security, choose a lower channel (36-48). Make sure that the SSID broadcast is turned on.

  If you still don't see not the band 5 GHz SSID on any of your devices Band 5 GHz, I would say that the EA4500 is faulty...

• After logging on this morning, everything on my screen is in very small print. How to make everything bigger.

  This includes the userpage, the bureau and all programs and documents.

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not fix it:

  Go to the Web site of the manufacturer of your laptop computer-graphics/computer card > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  Then:

  http://Windows.Microsoft.com/en-AU/Windows-Vista/change-screen-resolution

  Change the screen resolution

  Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges.

  See you soon.

  Mick Murphy - Microsoft partner

• Creative cloud update installation crashes at 5%, then displays error code 1001. Running Mac OS x 10.10. Occurs after several reboots.

  Someone at - it a fix for this problem?

  Hi Jay,.

  If you have deleted and renamed all the files mentioned above must install, if there are any file will not run the full installer and the installation program will give up to halfway.

  However if is not install I would suggest that you contact our support teams CHAT/PHONE as they can remotely in you machine and check the root cause of the problem.

  Contact the customer service

  *Remember to stay signed with your Adobe ID ( email id used to purchase the subscription ) before accessing the link above*.

  Select the exact options listed below for support options:

  

  Let us know if that helps.

  Kind regards

  BANI

• I somehow got my home page in full screen mode and not may not return even after several reboots. Help!

  How to make my homepage of mode full-screen in order to access my toolbar and use my computer.

  It is very good. Press f11 and it works. I had this problem and the reveiwed this Exact one and you press f11 and it restored the toolbar.

• Screenshots no longer record on El Capitan Office - worked this morning

  I'm on an iMac end of 2013, running El Capitan, using a Magic Mouse (wireless) and a wireless Apple keyboard. Until this morning, I could take a screenshot, and it is automatically saved to my DESKTOP.

  However, I just had to take a few screenshots, and they weren't on my desk.

  I open "finder" and found them in the "All My Files. Not sure why this is happening.

  Nothing has changed on my computer, (has not changed any terminal commands or anything like that).

  Could someone please tell me how to get my screenshots to save again in my office, and why they have suddenly stopped making this morning

  Thank you.

  Screenshots - change of location

• HP eprint unavailable after Chromebook updated this morning?

  Is this a general problem with the HP Server. Also message to the eprint Google that HP does not communicate? Message reads could not get information about the HP printer.

  DeskJet 3050 has

  Samsung Chromebook

  Problem solved by turning eprint works once again to the printer

• Satellite A500 - missing programs after the upgrade to Windows 7

  Hello

  I have the Satellite A500 - 134.
  When I was upgrading from Windows Vista to Windows 7, I had to remove some programs as Advisor on upgrade mentioned.
  Now I'm bored of these programs after installing Windows 7:
  # Toshiba Tempro
  # Toshiba ConfigFree
  # Toshiba Disc Creator

  In addition, the 'FN' key no longer (it worked on Vista), so I can't activate a feature when I press FN + (some F # buttons as F2).

  So, what can I do about it?

  Hello

  Have you used the kit to upgrade from Windows 7 home Toshiba? This kit also contains a utility that should be used to reason the installation process and mentioned in manual.

  Anyway, you can get tools on the Toshiba page now:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  The FN keys to install Toshiba Value added Package.

• OpenOffice org - DUPLICATED PROGRAMS after HAVING updated... THE OLD VERSION CAN BE DELETED?

  Original title: a COPY of the PROGRAMS AFTER UPDATE... THE OLD VERSION CAN BE DELETED?

  THE INTERNET WILL NOT OPEN THE PAGES OF THE SAME BROWSER CONNECTED TO THE INTERNET, SOMETIMES?

  AFTER THE UPDATE OF SOME PROGRAMS DISPLAYS COMPLETE (2) DIFFERENT VERSIONS INSTALLED ON THE COMPUTER... THE TWO MUST BE KEPT OR CAN I DELETE THE OLDER VERSION WITHOUT CAUSING PROBLEMS WITH THE NEW VERSION?

  OOo_3.2.1_Win_x86_install_en - US.exe:

  I USE THIS PROGRAM TO READ AND OPEN THE FILES DOC WORD, CAUSE MY WORD IS MESSED UP IN LAW AND IT DOES THE JOB BUT I THINK HE COULD START TO CAUSE CONFLICTS AND PROBLEMS... IF I COULD GET ANY INFO ON THIS PROGRAM, I WOULD BE VERY GREATFUL

  Hello

  
  What browser do you use?
  
  If you use internet explore then try optimizing and check for the issue.
  Reference: http://support.microsoft.com/kb/936213
  Usually we recommend that you use the latest version because it would include all later versions and patches for it. Uninstall the old version would not cause any problem.
  Uninstall the old version refer section below.
  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program
  You can also try to contact the manufacturer for assistance.
  http://support.OpenOffice.org/
  http://www.OpenOffice.org/contact.html

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]