CD/DVD on Satellite U500 drive failed after installing Windows 10

Similar Questions

• Re: Satellite L30D - low screen after installing Windows 7 resolution

  I installed Windows 7 on my L30D satellite. Since this installation, I can't have a better resolkuton that 1024x768.*It was much better with Windows Vista.

  I downloaded the latest ATI driver. No effect. I can't find the Catalyst Control Center as well. What can I do?

  Hello

  The Satellite L30D isn t I known...
  Do you mean Satellite L30 or Satellite L300D?

  Normally, you will need to install the display driver when you use higher screen resolutions, but first check the specifications of your internal display. Native perhaps screen resolution is 1024 x 768 and you can use higher t.

  You can download all the drivers for your laptop on the Toshiba site! Don t use the drivers from ATI directly, they are not designed for mobile chips.

• Satellite Z930 - Low Memory After installing Windows 10

  Hello

  I have a Satellite Z930, which works perfectly for years. I recently downloaded and installed Windows 10 and as soon as I did, I get low-memory computer warnings, the laptop works slowly and I need to stop it and restart it. I installed all the updates and I still have windows mail and web browser (a) open, but the problem persists. I used 75 103 GB of storage, not of course the relevance that is.

  Any help would be appreciated, I'm tired.

  Chris

  Dear Chris,
  I bet that for Toshiba support being able to help you, it would be necessary to know the exact version of the Z930 (e.g. Z930 - 16K) you have, including how (live RAM) is currently installed.

  Concerning
  Flow

• Satellite U300 - no sound after installing Windows XP Home edition

  First of all sorry for my bad English; P
  I installed Windows XP Pro on my computer and all the drivers with installation instructions, but I have no sound, there is no audio device. I downloaded the drivers from the Toshiba site and the Realtek site. Both do not work.

  Thank you.

  Hello

  Check this thread http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=99567 please

  There is some discussion on the similar problem. Maybe it will help you with your Satellite U300.

  Bye and good luck!

• Each installation of the PATCH fails after installing Windows updates

  Hello

  I would like to report a problem, I think it's a bug of Windows introduced by one of the Windows updates (unfortunately I could not know who of them).

  Here's the test scenario:
  1. install a fresh copy of Windows on a test computer
  2. install all the Windows updates available (so the system is up-to-date)
  3. create a sample MSI installer that installs only some dummy files (let's say Product Version 1.0.0) and host on a web server

  4. install the MSI from the online location using a command line like this:

  msiexec /i http://server/share/package.msi

  5. create a. Patch MSP (e.g. v1.0.1) which only adds a new file to v1.0.0
  6 install the patch v1.0.1

  RESULT: the installation of the patch fails with the following error message: "the file name, directory name or volume label syntax is incorrect."

  NOTES:
  1. the question has replicated to Windows 7 and 8 machines updated
  2. the question is not replicated on a new install of Windows without updates applied

  Is anyone aware of what may cause this error? Once again the patch installation fails only on Windows computers with the latest updates installed.

  THX,

  Daniel

  Hello Daniel,.

  Thanks for posting in the Microsoft Community.

  I suggest you post your question in the MSDN forums:

  Check out the link:

  https://social.msdn.Microsoft.com/forums/en-us/home

  Hope this information is useful. Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.

• Satellite Pro L40 - sound after installing Windows XP SP3 driver

  Hello

  I bought the Satellite Pro L40 about 6 months ago and the speed of the laptop is too slow with windows Vista. So I decided to install an old copy of windows XP that I had purchased earlier. I updated the windows SP3 installation before installing the drivers.

  Now, all the drivers have been installed correctly except the audio driver. I downloaded the XP version of the driver on the toshiba site, but it did not work. So I though that maybe the vista version would work, so I downloaded that. But that no longer works.

  Can someone suggest a solution where I can get the audio driver to work? Preferably without having to get the reinstalled windows again.

  Please help me...!

  Thank you

  Hello

  Try to reinstall the driver for sound card for XP; Just go here-> [fo Realtek card its Driver XP | http://support1.toshiba-tro.de/tedd-files2/0/sound-20071120150900.zip]

  Hope this helps :)

  Post edited by: iSkO

• Satellite Pro L40-15 a - Sound Driver default after installing Windows XP

  Satellite Pro L40-15 has

  Just installed XP Professional 32, merged with drivers installation disk. Everything works bar the sound. When you run the Realtek driver, downloaded from the Toshiba site, runs almost to the end gives error install Realtek HD Audio Driver failure!

  Clues?

  Hi sail_free,

  Please use the forum search before starting a question. You can find a great number of discussions such as this one:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=58026

  He therefore remove the audio driver, install Service Pack 3, and then reinstall the audio driver.

  Check this box!

• start failing after installing Windows XP firefox 12.0: error message: "the configuration is incorrect."

  After clicking on the icon of Firefox, I get the error message "this application has failed to start because the application configuration is incorrect".

  I uninstalled Firefox and deleted all the Mozilla files in my user account in the Documents and Settings folder. I installed the latest version of Java. Then I installed Firefox 12.0.

  I had this same problem when I updated my Firefox 11 to a later version of Firefox 11. I hadn't saved the old version of Firefox 11, and I couldn't find on the web, so I went back to Firefox 3.6. I am currently in Firefox 3.6.28.

  I'd like suggestions on how I could get over this stumbling block.

  Details of the configuration of my system:

  Version Java 6 32

  Name of the operating system Microsoft Windows XP Professional

  Version 5.1.2600 Service Pack 3 Build 2600

  System Type X 86-based PC

  Processor x 86 Family 6 Model 15 Stepping 6 GenuineIntel ~ 1867 Mhz

  Total physical memory 048,00 MB 2

  1.38 GB available physical memory

  Total virtual memory 2.00 GB

  Available virtual memory 1.96 GB

  Page file space 3.84 GB

  You can try to uninstall all entries of "Microsoft Visual C++" from the windows control panel and see if the error message disappears.

  (where another program on your pc depends on execution, it will display a dialog box when you start this program and offers you to reinstall once again)

• Satellite Pro U200 - no sound after installing Windows 7

  Hello

  I have a problem with sound after installing Windows 7 on a (PLUA1E) satellite Pro U200. No Win7 audio driver available on the Nordic pilot site. Help, please.

  G.Magnason

  Hey Buddy,

  Have you already checked the site Web of Toshiba itself?
  http://EU.computers.Toshiba-Europe.com

  I found a driver for Vista 32 bit and Vista drivers most also work on Windows 7 so it s worth a try! :)

• Satellite A300 - need driver SATA to install Windows XP

  I changed my OS winXP SP3.

  After reading a lot of posts, I finally installed my new operating system but with SATA compatibility mode. I tried to change again in AHCI mode, but every time I tried Windows hangs at loading. I also tried to install Storage Manager after installation of the OS, but it fails. So I decided to change the XP disk, including the SATA driver, but after downloading all the drivers on my computer I can't find the SATA driver.

  Can someone tell me where is the .inf file?

  Thank you to

  Hello

  Firstly it is not possible to change the compatibility mode to AHCI after installing Windows. You can only do before installing XP, otherwise you get a BSOD.

  However, if you have downloaded the Storage Manager you must extract the files from the .exe file. Open a command line and type the following command:
  ' - A - a - PC:------'

  After that, you can copy the inf for external floppy drive files or integrate it into the new XP installation disc.

• Device CD/DVD Toshiba HD DVD (not Bluray) does not work after installing Vista Service Pact 2

  Computer computer = laptop Acer Aspire AS9810-6829
  S/N = LXAF 15 707 0065 023 00 60V0
  Operating system = Windows Vista Ultimate... Service Pack 2
  Problem = DVD player does not work!
  DVD model = TOSHIBA DVGW/HD TS-L802A ATA Device

  Measures taken by the owner to correct the problem.
  1. check the Device Manager and records the following information:

  Windows cannot start this hardware device because its
  information of configuration (in the registry) is incomplete or damaged.
  (Code 19)

  Click on 'Search for solutions' to send data about this device to
  Microsoft and see if there is a solution available.

  2. Replace hard drive with a backup hard drive for 8 monthe ago.
  The DVD worked correctly with the old disk installed hard & Vista Service Pact 1.

  3. has concluded that the information in the registry for the DVD has been damaged.

  4. do you have a complete 'Clean Install' of the operating system and all applications.

  5. the problem seems to be resolved.  The DVD worked.

  6 Windows began its update procedure.  Several updates have been installed as well as
  Service Pack 1.  After each installation of the DVD worked fine.

  03:07 days of windows update, Windows Service Pack 2 has been installed.

  8. immediately after installing Windows Service Pact 2 DVD has stopped working
  Device Manager displays the same message that appears at the point 1 above.

  9. Please help!

  Ken Lewis
  E-mail address is removed from the privacy *.

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until February 26, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite P300-1This - Microphone does not work after installing Windows 7

  Hello world.

  At first, I'm sorry for my bad English, so I will say in no time.

  A few days ago, I removed a few programs, and I installed the new Windows 7 operating system. Everywhere I had to download the new drivers for the camera because they do not work. After you download the drivers of the camera, the camera become operative (YES!), but later worked for me, a built-in microphone was out of use. What may be of it with the cause and this driver to download and why the microphone not working?

  I can't talk with friends on Skype ;( Help me. I hope you know what I'm saying.

  Hello

  Do you really install any drivers after installing Windows 7? Maybe you have forgotten something and so it doesn t work.
  Micro is a part of webcam so be sure that driver webcam is properly installed and driver sound, you need to as well.

  After that, check the sound settings. Make sure that the Microphone is enabled and test it again with amp active microphone.

• Satellite 2210CDT: two problems after installing Win XP

  Hello! Maby it sounds funny but I found Toshiba Satellite 2210CDT inside my closet, installed Windows XP (oem supplied with the mouse, I bought some time ago) and it works!
  The only problems I have are:
  * When the system is in hibernation, it is impossible to 'wake up' (I remmember in Win98 in this laptop there is problem);
  * I don't really have the tools provided with Win98 came with the laptop (ie.battery status and so...)

  Appreciate the help, Mike

  PS sorry if I post in a bad place in the forum, but this is my first post (I hope you can understend...)

  Hello

  Satellite 2210CDT is an ancient and you should be lucky that Windows XP runs on you laptop.
  But this unit has been designed and delivered before the era Windows XP started.
  I checked the page of the Toshiba driver and there is no drivers for Windows XP. I found drivers only for W2k and Win98.
  Unfortunately, if you use the Win XP on your laptop you must do without drivers Toshiba, tools and utilities.

  I found a utility to do Hibernation for Win98 on the Toshiba site. I think that this is a utility that is important to use the hibernation mode. But as I said, it is available for Win98.

• New hard drive try to install Windows vista but it keep suspended after 60% and collapsed them

  New hard drive try to install Windows vista, but it keep suspended after 60% collapsed I tried a few time every time I had to wait for 5 hours, but the same thing happen again and again can help you pleaaaaaaaaaaaaase

  Monastir,

  What happens when it stops it is have a Sata driver. It is on the drivers cd you received with your computer. You can also start the computer and press F2 to enter the bios. From there down to Configuration system - SATA Operation and change this to ATA. It is located to AHCI. Save the changes and restart the installation. Once you have loaded Windows and drivers installed, you will need to go back to AHCI.

  Dell-Jesse

• communication manager fails after installing vista 64 sp1__

  communication manager fails after installing the vista 64 sp1. If I try to uninstall the sp that the entire system crashes

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner