CS4 and performance with the Radeon HD 4670 problems

Similar Questions

• The screen flickers when playing game. With XFX Radeon HD 4670 1 GB _ Windows7

  I have Windows 7 64 bit with XFX Radeon HD 4670 1 GB SDDR3 card, my current resolution is 1920 x 1080 with 60 htz, whenever I have to play the game and use a lower resolution for the game then my graphic resolution, the screen flickers (it sparkles in any resolution), it goes black and back. and when I leave the game that I find my real resolution changed the resolution which has been put into play.

  My Windows is updated, and I have the latest version of the driver installed on the system from ATI.

  It is very annoying. Any help is appreciated.

  Narayan

  It seems that the problem was with card... maybe it was not set up correctly, wat I did was I removed the card and I cleaned the card with gum and put it back again once... its fantastic work right now... Thank you all for you answers. Narayan

• What happened to the feature to get around on the artboard by pressing the space bar and dragging with the mouse?

  What happened to the feature to get around on the artboard by pressing the space bar and dragging with the mouse?

  cwalker,

  If it does not, it may be time for the list:

  Sometimes, (some) things may fail or stop working for no apparent reason. When (other) possible reasons/remedies do not work, it is perhaps a kind corruption (temporary or permanent), or even preference settings which disturbs, which can be cured with something on the following list put in place in order to provide a catch-all solution for otherwise intractable cases. It starts with a few easy suggestions and safe) 1 and 2) for cases less serious and goes two ways 3) and 4) to reset the default preferences (easily but irreversibly and more laboriously but more completely and also reversible), then follows a list 5) various other possibilities, and it ends with a complete reinstallation 6). If no other suggestion doesn't work, or if no other suggestion appears, you can start on the list and decide how to go or who can apply.

  The following is a general list of things, try when

  (A) the question is not in a specific file,

  (B) you have a printer installed, connected and turned on if it's a physical printer (you can use Adobe PDF/Acrobat Distiller as a printer by default without the need to have a printer on, of course you will need to specify when you really need print on paper), and

  (C) It is not caused by problems with opening a file from external media (see below).

  You tried/made some of them already; 1 and 2) are easier for temporary strangenesses and 3) and 4) specifically may be corrupted/inconvenient preferences); ((5) is a list in itself and 6) is the last resort.

  If possible / there is, you must record a current work first, of course.

  (1) close Illy and open again.

  (2) restart the computer (you can make up at least 5 times);

  (3) close Illy and press Ctrl + Alt + Shift / Cmd + Option + shift during startup (easy, but irreversible);

  4) move the folder (follow the link with this name) with closed Illy (more tedious but also more thorough and reversible), for CS3 - CC you can find the file here:

  https://helpx.Adobe.com/Illustrator/KB/preference-file-location-Illustrator.html

  5 look through and try the relevant among the other options (click on the link with that name, item 7) is a list of the usual suspects among other applications which can disturb and confuse Illy, point 15) applies to the maybe CS5, CS6 and CC);

  Even worse, you can:

  6 (A) uninstall (check the box to delete the preferences, if any), B) run the cleanup tool (if you have CS3/CS4/CS5/CS6/CC) and C) reinstall. It is important to use this step three way: otherwise, things may persist.

  http://www.Adobe.com/support/contact/cscleanertool.html

• Satellite A100-225 keeps freezing and crashing with the new HARD drive

  Hi all

  I have a Satellite A100-225 with a 100 GB SATA Hitachi drive I int it that recently started showing bad sectors. Then I bought a Hitachi 320 GB SATA II drive to replace it. I tried the drive and it was recognized right away, so I didn't need to change the SATA speed. I ran the restore a disk installed newest. The problem I have is that the computer keeps freezing and crashing with the new drive. It takes a lot of time to load up when turned on and there is a noticeable to untermittant delay when you drag the cards around solo.

  I tried to run the Hitachi drive test and it comes back fine. I also tried to turn the SATA speed of the drive down from 300 to 150 via the firmware, and although I saw a slight improvement, it is still not right.

  I talked to Hitachi and they say that he could not be 100% compatible, so the problems. Someone at - it else sucessfully set up a replacement for this notebook drive and if so what make and model. Has anyone else had simular problems?

  Thank you

  Years ago, I've updated yet more former Satellite M70 with SATA HDD (270 GB if I m remembering well) and everything was fine.
  In my view upgrade with SATA HDD normal shouldn't be a problem. Do not SATA II because it will not work faster.

  I can't say for sure, but there must be a compatibility problem.

  Let's see if someone else had better luck with the upgrade of the disk on the Satellite A100.

  Have you checked this forum with advanced search option? Maybe you can find some old NET on upgrade the HDD on A100.

• I've updated VIA / S3G UniChrome IGP plug-and-play reverse, but the update still no resolution 1600 x 1200 with the exception and others with the same ratio of 4 x 3.

  I've updated VIA / S3G UniChrome IGP plug-and-play reverse, but the update still no resolution 1600 x 1200 with the exception and others with the same ratio of 4 x 3. That did not help.

  Hello

  1. What version of Windows are you using?
  2. What is the brand and model of the computer?

  I suggest to run the patch from the following link and check the status of the issue.

  Hardware devices do not work or are not detected in Windows.

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  If the problem persists, I suggest you to send us more information to help you better.

• Files and folders with the same name

  I am trying to unzip some files and folders and it works fine on my computer with Windows XP. However, when you use Windows Vista I can't because there are folders and files with the same name. After an internet search, it seems that the only suggestion is to extract the files in separate folders which then would allow them to keep the same name. The problem is I want what they in the same folder and they need to have the names they have.

  NOTE: I do have two files with the same name in the same folder, I have a folder and a file with the same name. I would have thought that this would be acceptable because they are two things separate, and given that it's great under XP.

  All solutions?

  You are right, if I make a file and a text file with the same name, it works fine. However, when I try to extract the files I need it tells me that there is already a file with the same name as the folder. He goes to tell me to choose a new name but my only options are 'try again', 'jump' or 'Cancel '.

  I think I can understand what the problem is. For some reason when you download the zip file, the computer seems to have added a few files side with any format other than "file." It is those who have the same name as the folders as if they were, and they could not be uncompressed because of this. I have no idea whence they came as they appear from nowhere (compared to my XP). I'm trying now unzip the files separately and exclude the strange s 'file '.

  Thanks for your help though!

• Service Pack does not have changes to restore it then shuts off and restarts with the same message over and over again.

  Help!  I have an apple mac with windows alongside mac system.  I the have not used for a while and when I logged in the windows system advised me to update to IE 9.  To do this, I had to install Service Pack 2 I did.  He then restarted but cannot install and came up with the following: Service Pack does not have changes to restore it then shuts off and restarts with the same message over and over again.  I don't know what to do to reopen and to reinstall the Service Pack.

  Hello

  This article explains how to troubleshoot problems when you install a service pack for Windows Vista or Windows Server 2008.

  http://support.Microsoft.com/kb/947366

  Use this forum link for all questions related to Windows Vista SP1, Windows Vista SP2 and Windows Server 2008 SP2 below.

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  or repost in the Windows Update forum link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• I'm administrator, but do messages telling me that what I want to do is forbidden by the administrator and verify with the system administrator

  original title: administrator problem

  I am the administrator with a password (in fact the only user of my computor) but continue to receive messages telling me that what I want to do is forbidden by the administrator and verify with the system administrator. How to work around this problem? My os is Vista Home Premium.This happens more frequently when I try to remove a program

  According to what "program", you tried to 'delete '.

  If one of these programs to the system, you will get the message.

  If it's one of those programs that you have installed from the web, try one of these programs to "Uninstall" part 3:

  Revo Uninstaller 1.91
  http://download.CNET.com/Revo-Uninstaller/3000-2096_4-10687648.HTML?tag=mncol

  IObit Uninstaller 1.1
  http://download.CNET.com/advanced-uninstaller-free/3000-2096_4-75157230.HTML?tag=mncol

  Advanced Uninstaller Free 10.1.1
  http://download.CNET.com/Revo-Uninstaller/3000-2096_4-10687648.HTML?tag=mncol

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Copy and scan with the Officejet Pro 8100

  Can I scan and copy with the Officejet pro 8100?   If Yes, how, is not in the manual.

  LON

  The Officejet Pro 8100 is a printer only, it is not a multifunction device.

  You can find the specifications below:

  http://WWW8.HP.com/us/en/products/printers/product-detail.html?OID=4323241&JumpID=oc_r1002_usen_c-001_r0002

• I need to reload of Photoshop CS4 and I get the error: "License has stopped working" error message 6. -What this means and how can I solve this problem?

  I need to reload of Photoshop CS4 and I get the error: "License has stopped working" error message 6. -What this means and how can I solve this problem?

  Hello

  Please see error: "License has stopped working". Windows or error: "License has stopped working". Mac OS depending on the operating system you have.

  Hope that helps!

  Kind regards

  Sheena

• I bought a trial 30 Adobe BC and then enabled so I could have the product.  An email is sent with the serial number.  Problem is that I don't have the previous version and computer scientist was here, where he suggested I ask fo

  I bought a trial 30 Adobe BC and then enabled so I could have the product.  An email is sent with the serial number.  Problem is that I don't have the previous version and computer scientist was here, where he suggested I ask you to please provide me with the version complete.

  Did you buy the full version or an upgrade?

• Files created with Illustrator CS2 12.0.0 version will be compatible and works with the latest version of Illustrator.  The files are registered as *.ai------.

  I have an older version of Illustrator and you want to upgrade.  My question is: files created with Illustrator CS2 12.0.0 version will be compatible and works with the latest version of Illustrator.  The files are recorded as * .ai?

  That should be no problem.

  Text will be redistributed without doubt if you want to change it.

• I've uninstalled and reinstalled the drive several times with the same result, my problem is when I download the drive icons for my browsers and above all my desktop icons change adobe logo, so when I click on them Adobe tries to open them.

  I've uninstalled and reinstalled the drive several times with the same result, my problem is when I download the drive icons for my browsers and changing most of my the desktop icons for the adobe logo, so when I click on them Adobe tries to open them, of course, he does not format because it's not an adobe application , so I tried to restore the computer to an earlier date and it wont let me as long as Adobe reader is installed, so I need to uninstall and now I have nothing to open files and downloads of Adobe, someone had this problem and if so, did you get it resolved? Thank you Tommy...

  This may help: Application, file icons change in Acrobat/Reader icon

• How can I change the color of the cloth? I tried right click changed to black, gray and even blue but it is still white and mixes with the artboard

  How can I change the color of the cloth? I tried right click changed to black, gray and even blue but it is still white and mixes with the artboard

  It should be present.

  

• How do monitors vecteurscopes and waveform with the new update in first Pro CC?

  How do monitors vecteurscopes and waveform with the new update in first Pro CC?

  Press the COLOR at the top of the interface or go to the window workspace and select Lumetri Scopes.

  If you are a reverence for the old spans: there have been removed in favor of the Lumetri Scopes.