CS4 Application Hang error in Windows

Similar Questions

• I get a dll error message that says: "the application or DLL C:\WINDOWS\system32\kizinone.dll is not a valid Windows image. Please check this against your installation diskette.

  I get a dll error message that says: "the application or DLL C:\WINDOWS\system32\kizinone.dll is not a valid Windows image.  Please check this against your installation diskette.

  I went to the system registry to find the file it refers and is not a he.  I ran a norton registry cleanup and a virus scan.  I did find something online that made reference to this dll file.  The message appears at any time that I start a new program.  How to fix this, or find the virus that is the cause.

  A Google search for "[insert the name of the file]" grown up nothing. When you get no hits for a filename on Google, chances are high that it is a malicious program file. You did not when you get the message. If it's only at startup, either you have uninstalled the malware program or your antivirus/antispyware program did. In all cases, a reference has been left in the boot file. You can remove the reference by managing your startup. If you get the message during regular time on the computer and not not only at startup, your computer is still infected.

  Norton will do the job of cleaning and registry cleaners are garbage who at best will not do anything and the worst risk damage to your Windows installation.

  First of all, make sure that the computer is really free of virus/malware through these systematically - General malware removal steps http://www.elephantboycomputers.com/page2.html#Removing_Malware . Then, if the computer is really clean and you still receive the message, manage your Startup to remove the reference to the malware:

  Start > run > msconfig [Enter]

  This will open the System Configuration utility. Look under the Startup tab and find the likely culprit. Uncheck the box next to its name, apply and OK out. You don't need to restart immediately, but next time you do, you will get a dialog box saying that you have used the utility. Just check the box that says in effect, "don't mind to this subject again".

  How to troubleshoot by using the Msconfig in Windows XP utility - http://support.microsoft.com/?id=310560

  The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspx
  MS - MVP - Elephant Boy computers - don't panic!

• "The Application or DLL C:\Windows\System32\dwmapi.dll is not a valid Windows Image" Windows Live Mail - Error Message

  When you use Windows Live Mail, whenever I try to open an e-mail that I receive the following error message: the Application or DLL C:\Windows\System32\dwmapi.dll is not a valid Windows Image.  What can I do about it?

  View all Windows Live and Hotmail questions in the appropriate forum found here:
  http://windowslivehelp.com/

• Error "the application or DLL C;|WINDOWS\system32\NCObjAPI.DLL is not a valid Windows image. "Please check this against your installation diskette."

  Original title: lockout

  I get a black screen with the message from the application or DLL C;|WINDOWS\system32\NCObjAPI.DLL is not a valid Windows image. Please check this against your installation diskette.

  Hey Todd-Cindy-MorganBurris,

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. You have security software installed on the computer?
  4. You are able to boot into Windows after the error message?

  Method 1

  If you are unable to boot into Windows then check if the problem persists in safe mode.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Method 2

  If the problem does not persist in safe mode, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  Method 3

  If you can boot into safe mode and clean boot procedure don't help then I would suggest that scan you SFC on the computer that will search the corrupted system files and check if that helps.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows XP installation CD.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

• EXE Error "the application or DLL C:\WINDOWS\system32\WINHTTP.dll is not a valid Windows image

  When I try to download & install programs, the following error message "[program] .exe" is displayed: "the application or DLL C:\WINDOWS\system32\WINHTTP.dll is not a valid Windows image.  Please check this against your installation diskette. "All the solutions out there?

  Hi pixietra,

  1. did you of recent changes on the computer?

  2. what browser you use to download programs on the computer?

  3. it happens with any download and installation of the program?

  4. do you have security software installed on the computer?

  I suggest that scan you SFC on the computer that would be a system file corrupt on the computer search and replace.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows XP installation CD.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

• Error when you click icon: the application or DLL C:\Windows\System32\ccfgnt32.dll is not a valid Windows image.

  Not a Windows image is valid. Help!

  At the start of my PC, and whenever I click on any icon I get the error message:
  The application or DLL C:\Windows\System32\ccfgnt32.dll is not a valid Windows image. Please check the Setup disk.
  At the start there are several, each with a file name of a program in the blue bar, i.e. "firefy.exe - bad Image" followed by the above statement. After you click the only option, 'OK', the system works well, but the message will continue to re appear after clicking on any icon on the desktop or the start menu.

  I need help with the removal of this question. I have not installed or run new programme before the start of last week. Thank you.

  3/15 - installed, updated and ran Ccleaner and Malwarebytes. Restart the pc after a successful run of each. Same question:
  The application or DLL C:\Windows\System32\ccfgnt32.dll is not a valid Windows image. Please check the Setup disk.
  Help please. Thanks in advance.

  CRR
  E-mail address is removed from the privacy *.

  Hello RRC633,

  I suggest that see you if you have corrupted system files.

  Click Start
  At the command prompt, type: sfc/scannow

  This will check for any violation of the integrity and repair any damaged operating system files. It may take some time to run.

  Reboot your system.

  The KB Article ID: 310747 - Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
  http://support.Microsoft.com/kb/310747

  If that comes back without any problems of integrity, then I would check the event viewer for errors in the application or system event logs.

  The KB Article ID: 308427 - how to view and manage the event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

  Please answer back with an update.

  Marilyn

• I can't reinstall or uninstall CS4 on Windows 7. I get a message indicating one or more CS4 applications are running and neet being closed, which is not.

  How can I reinstall or uninstall CS4 on Windows 7. I get a message indicating one or more CS4 applications are running and neet being closed, which is not.

  Hello

  Please close the process below the monitor activity/task manager and try again:

  

  Kind regards

  Sheena

• During the installation of Windows, shows that an internal error occurred in the initialization stage. The application could not be loaded. Please contact the vendor of the application. Error n ° 302

  An error internal occureed in the initialization stage. The application could not be loaded. Please contact the vendor of the application. Error n ° 302

  original title: an internal error occurred in the initialization stage. The application could not be loaded. Please contact the vendor of the application. Error n ° 302

  Hello Stephen,
  try to run the "Startup Repair" utility located on your installation DVD.
  hope this helps
  Eddie B.

• Error Windows Live Mail: Windows Live Mail could not be started. The application could not open Windows Live Mail, mailbox messages.

  original title: Windows Live Mail

  I am trying to send messages on my own page of email, but windows live mail does not accept my emails.

  The message I get is as follows:
  Windows Live Mail could not be started. The application could not open Windows Live Mail, mailbox messages. My Windows Live Mail mailbox data is currently used by another program, such as a virus scanner.

  I need to close the program or wait for it to complete its operation and then reopen Windows Live Mail. Are the numbers that I get this message: (0x800c0455, 997) then I ok this message and receive another message.

  Windows Live Mail could not be started because. MSmail.dll could not be initialized.
  Windows Live Mail may not be installed correctly.

  Can you please help me settle this question, as I have a lot of mail to be sent to my e-mail address?

  Hello Annie,.

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• Why open links in Firefox causes a "Server error in ' / ' Application Runtime Error" but not in "Internet Explorer"?

  When I click on certain links in an e-mail message (and Firefox is the default browser), I get the following error:

  In the Application Server error ' / '.

  Runtime error
  Description: An exception occurred while processing your request. In addition, another exception occurred during the execution of the custom for the first exception error page. The request was interrupted.

  If, however, I follow the same links (and Internet Explorer is the default browser), I get no error and the good content of the link is displayed.

  What is causing this error? As I prefer Firefox, how can this problem be fixed?

  Windows 7 Service Pack 1 operating system
  Firefox Version 32.0.1
  Internet Explorer Version 11.0.9600.17280

  Thank you for your help.

  First

  When you look at the address in the address bar, it seems to coincide with the e-mail?

  It seems that Firefox has sent the server something it was not expected. Sometimes this can be caused by obsolete or damaged cookies - assuming that you have visited the site before. It could also result in changes of standard information sent to servers such as the string 'user agent' that specifies your version of browser and operating system.

  To clear cookies for a site, while displaying a page on the site, either:

  • Right click and select View Page Info > Security > "View Cookies".
  • (menu bar) Tools > Page Info > Security > 'view the Cookies '.

  Then try to reload the page. Who help me?

• Error code Windows Update 800700 B & System Restore 0x80071A91 error

  Cannot install critical system updates.  Download the update error 800700B.  Manually and through MS FixIt ran the command fsutil resource setautoreset to clear/clean line newspapers.  Has not fixed the problem.  Through research found related error on the system restore.  Am unable to create a restore point and 0x80071a91 error.  A run the command-line recommended by MS to address, cd /d %SystemRoot%\System32\SMI\Store\Machine
  attrib s h *.
  del *.blf
  del * .regtrans-ms

  and get an access error:
  C:\windows\system32\smi\store\machine\schema.dat{d3e605ee-4C71-11de-be3f-001d609310af}. TM.blf
  The process cannot access the file because it is being used by another process

  Any ideas?

  Currently no anit-virus software, but recently (within 2 months) not uninstalled Mcfee... I'll try to get more details from the owner about the software was previously installed Antivirus

  You don't have to bother. This is not good. :(

  See...

  Help: I got hacked. Now what should I do?
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Backup of personal data (which none should be considered 100% reliable at this point) then do a format and clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "of http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista#section_3

  After the new installation, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network and before using a USB (flash drive) or the SD card that is not brand new, or has not been freshly formattedotherwise:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application. [1]

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  ==============
  [1] I recommend Avira AntiVir & Microsoft Security Essentials (both free) and NOD32 & Kaspersky Anti-virus (not the "suites").

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Code800F900 'unknown error in windows update' trying to download windows vista service pack 2

  try to download windows vista service pack 2. Last update was on May 21, 2010. For a few weeks or months, the computer can be terribly slow. Often a hard drive rattle sound. For this, I tried anti-spyware, last week I installed and ran AdAware from lavasoft. It found nothing except two small cookies. A few weeks earlier, I had done the same thing using windows Defender. Also nothing. Along with a check disk hard I did not find much either. What end of the lifecycle for this computer, now about 3 years? He was one of the first available vista computers. Thank you for your help, Peter

  * Original title * Code800F900 'unknown error in windows update', try to download windows vista service pack 2__I have an oem version purchased with HP model s7720.nl

  Why did you delete your post where you said that Norton application has been installed at some point in the past?

  There is nothing wrong with the guarantee of these forums, but I'd be willing to bet that there is something VERY wrong with the security of your computer!

  Let's cut to the Chase. See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "ofhttp://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Tip: After getting the computer fully patched, download/install KB971029 manually:http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application.

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If you need help, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/vistarepair/threads

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• How do I know what software is causing the error to Windows Installer: lack of program

  original title: How do I know what software is causing the error to Windows Installer

  Windows XP

  When you get this message that keeps popping up every two hours-

  The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded

  may be missing or the upgrade patch may update a different bersion of the program.   Make sure that the program

  to be upgraded exists on your computer and that you have the good patch upgrade. ."

  How do find you the application or software, or the program is causing the problem.  ?

  It is a simple solution.

  Go in run, type: msiexec /Unregister 'press the ok button.

  Back to run, enter: msiexec/regserver "press ok.

  Youre thru. Restart the pc

• Rstrui.exe - bad Image of the application or DLL C:\Windows\System32\Wbem\Framedyn.dll is not a valid windows image. AND the exe task manager. -Bad guess. The application or DLL C:\Windows\System32\VDMDBG. DLL is not a valid windows image.

  I use WIndows XP.  After that THINKPOINT is presented on my system, I have not been able to access my task manager or restore my system to an earlier date.

  I have checked Kellys Korner and various other suggestions on the internet, but have had no luck with anything.

  It shows that the HKEY value for the Task Manager is set to 0.  Don't know if that helps.

  I BELIEVE I have the THINK POINT removed from my system.  I use Microsoft Security, Ad-Ware and Malwarebytes Anti - Malware.  Between the 3, it seems I have everything.

  But now I can not restore my system, or use my TASK MANAGER.

  Help would be GREATLY appreciated.

  Thank you!

  Bindifer

  Think like a malicious software...
  It infects your system and is not to be found and removed.
  What are you most likely to use to find and remove malware?
  Internet, Google, Task Manager, regedit, restore the system command prompt, etc...
  The malware is often afflicts one or more of these components to try to trick into thinking you need to perform a system restore, a repair facility, or even to reinstall your XP from scratch.  None of these things are necessary since you can usually just to thwart malware.
  If the referenced files are completely absent from your system, you will see messages like this when you try to run the applications:
  Taskmgr.exe - Unable to locate component
  This application has failed to start because VDMDBG.dll is not found.  Reinstalling the application may fix this problem.
  Rstrui.exe - Unable to locate component
  This application has failed to start because framedyn.dll was not found.  Reinstalling the application may fix this problem.
  Sometimes you can click through the OK messages to access the System Restore screen, but the restoration of the system is still broken.
  If the referenced files are present on the system, but somehow corrupted, you will see messages like this when you try to run the applications:
  Taskmgr.exe - bad Image
  The application or DLL C:\WINDOWS\system32\VDMDBG.dll is not a valid Windows image.  Please check this against your installation diskette.
  Rstrui.exe - bad Image
  The application or DLL C:\WINDOWS\system32\wbem\framedyn.dll is not a valid Windows image.  Please check this against your installation diskette.
  Sometimes you can click through the OK messages to access the System Restore screen, but the restoration of the system is still broken.
  These files are part of the file 3498 who cares about Windows File Protection, so unless the WFP is also broken it is likely that files are missing completely (you get a different error message).  What is more likely is that the files are somehow corrupt or have been replaced by incorrect files.
  Assuming that XP is installed on your C drive and in the windows folder, XP keeps copies of 3498 files that he cares about this issue:
  c:\Windows\System32\dllcache
  On a health care system, Windows File Protection keeps track of 3498 protected files and quickly and quietly replaces all the files in the list that appears missing from the backup folder.  File protection Windows will not replace the files if they are somehow corrupted or replaced by bad files.
  You can simply copy the backup files in the dllcache folder in the folder where are the suspects or missing files.
  Using Explorer, navigate to the folder c:\windows\system32\dllcache and individually to copy the backup files in there and then navigate the folders where the suspect or incorrect files are and paste in the copied files.
  Depending on your installation, you can also find copies of the files in this folder:
  c:\windows\ServicePackFiles\i386
  Answer Yes, if you are prompted to replace existing files.
  Test your functions now and then to reboot your system to make sure the changes 'stick', and then fix any problems.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• application or the C:\windows\system32\odbcint.dll dll is not a valid windows image

  Hi everyone, my fathers laptop crashed yesterday and since then he was able to start and the following message appears

  application or the C:\windows\system32\odbcint.dll dll is not a valid windows image

  something appears then it restarts. I did some occasional checking of this problem, as believe that he may be able to replace the file with its installation in recovery mode disc, although neither nor I did before can someone provide some support on what to do, ideally if we can get into windows and get the docs off the laptop computer he is happy the new facility because I think that it maybe Basic virus/malware issue.

  Thank you for your time and help in advance

  If the c:\windows\system32\odbcint.dll file is missing, you see a message like this:

  User Interface failure
  The logon User Interface DLL msgina.dll failed to load.
  Contact your system administrator to replace the DLL or restore the original DLL.

  There is a button to click to restart, which when clicked, takes a while to reboot the system.

  If the c:\windows\system32\odbcint.dll file is corrupted, you will see a message like this:

  Winlogon.exe - bad Image
  The application or DLL C:\WINDOWS\system32\odbcint.dll is not a valid Windows image.  Please check this against your installation diskette.

  By clicking OK twice, you will see the message above about the failure of User Interface.

  There will be events in the case where the viewing Application log that look like this:

  Event type: error
  Event source: ODBC
  Event category: no
  Event ID: 0
  Description:
  Cannot find the description for event ID (0) in Source (ODBC). The local computer may not have the information necessary registry or message DLL files to display messages from a remote computer. You may be able to use the option/auxsource = flag to retrieve this description; For more information, see Help and Support. The following information is part of the event: unable to load the resource DLL odbcint.dll.

  You should figure out what happened to get into this situation and respond to the following questions, then decide which is the best plan:

  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  Fill in the blank: my system worked well until: _.

  Did the problem to the top after show installed new software and if so, what software?

  You have recently installed any type of remote control software?

  Now to fix it depends on how you are fixed to the boot media, since you'll have to start on something.

  We know that XP likes to keep the backup copies of critical system files in this folder:

  c:\Windows\System32\dllcache

  Knowing this, start in Recovery Console XP using your genuine XP bootable installation CD or if you have a genuine XP bootable installation CD, you can make one (no XP media required).  If you don't know what type of bootable media, you, do a CD of bootable XP Recovery Console and do not forget.

  If Yes, you want and are not in possession of a genuine XP bootable installation CD or a CD from Recovery Console XP bootable, the instructions to create a bootable XP Recovery CD of Console can / will be provided before any questioning begins.

  You can replace the missing file or suspect the XP Recovery Console by entering the following command:

  Copy c:\windows\system32\dllcache\odbcint.dll c:\windows\system32

  Answered in the affirmative if invited to replace the existing file and then you should see a message that 1 file (s) has been copied.

  If you get some type of a file not found message, the file is easily replaced using other methods.

  Remove the CD and type "exit" at the Recovery Console prompt to restart the system.

  Do, or do not. There is no test.

  I decided to implement the points for a new puppy instead of a pony!