CS4 - no video, just audio

Similar Questions

• CS4 Pro video and audio recording separate...

  I need to have the video and audio together... not two separate folders, my project is due in two days, and I have no idea how to get them both together... I use cs4 master collection!

  How did you need the project? Will it be a DVD-video, a data DVD, another Portage system?

  If you make a DVD-video, you will want to use again the author who and she will have Audio & video encapsulated in the VIDEO_TS folder structure and resident in VOB (basically MPEG-2 files) in this structure.

  If you make a data DVD, where you'll have a single file (multiplex or multiplex), it is a simple export. If you do not get the Audio & video multiplexed into one file, there are the wrong settings in your export. First of all, you will want to check the export Audio and video export, and then you have to go to the tab of multiplexing (on most Export dialog screens) and choose "DVD" and NOT "nil." This is probably one of these two parameters which gives you separate Audio and video.

  If you need something, tell us what it is and make sure you have chosen the export Audio and video export AND chose the correct setting in the tab of multiplexing - basically nothing, but nothing.

  Good luck

  Hunt

• No video just audio when you place them on my time line

  I've been editing with adobe pro CC for awhile first and only today, after upgrading my CC from 9.0 to 10 I had a problem where I have the audio when you put video clips on my time line. For some reason any its not bringing don't not the full file in. I played video clips on another program and they work and its fine and when you drag them in the first pro library, they have the preview and I am able to do scroll the video ok it's just when you place on the time line its not bringing don't not the video with her.

  In looking at some of the clips in the project Panel, they are not showing the icon that indicates there is an audio file on the clip.

  On this line at the top of the page, the miniature of a clip from gopro, central element has no icon in the lower right corner. This is just the video as much as PrPro can see.

  The good article, the tile with two icons below on the right... these icons are first that it is used on a sequence (hovering above him and he'll even tell you how much time it is used) and the second icon, it's that it has linked audio.

  So... is not audio clips, or the way in which it has been imported to the PrPro is not 'see' the audio file linked... or the database/cache is screwed upward. I think that these are the three main options.

  So... using MediaInfo to "see what is inside your media" or play them elsewhere, did sound?

  If so, how do import you them into PrPro?

  Can you make a new project, import the clips and have his "appear" with the clip?

  Neil

• Windows Media Player shows no video just Audio

  Hi all

  I have the Satellite A110-275, Windows XP HOME Edition. I installed all types of codecs like K-Lite, all THE Codecs pack, Divx, filter AC and all the others, but my problem has not been resolved. My problem is that when I watch a movie online / new online running on Windows media player. I can hear the sound but no video is displayed. I have all the steps to see the video, but fails.

  Can someone tell me please the solution of this problem? Any type of live streaming codec, etc.

  Thank you
  Thémans

  Hello

  Your suggestions might be. I think you need a codex or right and compatible for Win Media Player or you will need to install another player.

  Sites Web de Microsoft provides own codex for Windows media player. I ve installed the beyond and I'm able to watch all the movies and short clips on the sides of the internet as youtube for example. No problem at all...

  Check this sites from Microsoft and plug-ins available:
  http://www.Microsoft.com/windows/windowsmedia/player/plugins.aspx

  But I noticed that many Web sites provide movies that can be opened with flash player.
  I would recommend so also install this player. As far as I know you can find it on the Adobe site.

  Good luck and best regards ;)

• Import video mp4 on CS4, but appear as audio file?

  I just installed Premiere Pro Cs4 4.0.0

  First, I imported a file mp4 video:

  Video: MPEG4 VIDEO (H264) 1280 x 720 29.97 fps [video]

  Audio: AAC 48000 Hz stereo 1536 Kbps [Audio]

  And it appears correctly in the first

  But next time, I always imported this Mp4 file, but now it appears only as an audio file

  What is the problem? Please help me

  First update to 4.2.1 and then try again.

• Movie Maker import my. MPG video with Audio only

  My OS: Vista Business 32-bit
  My Movie Maker: Version 6.0

  I have a video file of 4.4 GB of a recent trip.  It's on my Motion LE1700 Tablet PC to the .mpg format.  If I click on the file, the video and audio both appear.

  My problem: when I import into Movie Maker (by clicking on 'Videos' under 'Import' to the left of the screen) if I can edit and publish later, the properties end up the show as an audio file under 'source '.  It only allows me to drop - drag the file into the audio part of the timeline, and I can't see the video when I play (I can hear the audio).

  What I am doing wrong?

  Thanks for any help.

  Movie Maker has problems of compatibility with the MPEG files...
  It may be interesting to try to convert the MPEG for the WMV file
  format before you import into Movie Maker.

  There are many programs that can do conversions...
  The following freeware is an example...:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup260.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)

  First, you will need to decompress the file or just open the
  Drag FFSetup260.exe out of the folder
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

• Error when you try to open a video or audio file using Windows Media Player-operation abandoned

  WINDOWS MEDIA NOT OPEN FOR ME!

  I recently bought a new jvc hd everio hd camera, I put the videos I recorded there from the other day that the files were .mts and he says, replace these files with .avi and it will play so I played 1 and he played really agitated then WMP just stopped working and I got the error

  C:/folder...  Abandoned operation!

  Continues to appear when I try to open any type of video or audio file now, I want to uninstall and reinstall the wmp player, but I need to know is there a way to fix this to play as it was before, I went on the net tryin to google it and search for it but im leaves loop holes saying changing the programs by default and other things but nothing worked , I need to find the right way to get this working... help me...

  Hi DragLee,

   
  Windows Media Player is the default or integrated drive in Windows Vista. It can't be uninstalled or reinstalled. However, if a system file is missing or damaged, we can run sfc (System File Checker) scan to find and fix system files corrupted.
   
  Try these steps and check the result.
  Step 1: Scan of the sfc
  1. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  2. type the following command and press ENTER: sfc/scannow
  3 restart the computer once the analysis is complete.
  4. check if the problem persists.
   
  For more information, see http://support.microsoft.com/kb/929833
   
  Step 2: If the problem persists, perform the system restore to a date where the media player was working fine
  1. Click Start, type system restore in the search box, and then click System Restore in the list programs.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  2. in the System Restore dialog box, click on choose a different restore point and then click Next.
  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next.
  4. click on finish.
   
  See which is the system restore?
  I hope this helps.

   

  Kind regards
  Syed - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Video and Audio not connected

  Somehow, I'm away PP CC 2015 in a State where I drag a video clip in the project and then to the timeline, the video and audio are not related?  Below, he thinks they are, but in the timeline I can drag video and audio around as they are not?  This just started happening.  Normally when I drag a video clip on the timeline, the audio and video are linked, and when I drag a he drags both unless I'm going to Clip and separate the.  What I did wrong and how to do go back to the way it worked by default?

  Thank you

  
  Dave

  Try clicking on this button:

  

• PSE video and audio go out of sync on finished product

  A very strange problem has developed.  I have a PRE project that plays perfectly into the program itself, but when I exit the project start audio and video in sync but go not synced to the first place where the audio and video clips are spliced.  To be precise, I have a file mp4 audio (.m4a) synchronized with a .mov file.  At the first break, where I spliced m4a, m4a and .mov to .mov, the project is in phase when I play in the video window of PRE.  But when I have the project output, video and audio go out of sync at the first break.  Other facts:

  • PC, 8 GB of RAM, W7, all installed updates.
  • By using the same file .prel about a month ago, it worked well.  (I tried to do a DVD extra of this project, when the problem came.) The only thing related to the video that changed on my machine was a new version of Studio of GoPro.  Just in case, I uninstalled from my computer and the problem of PRE is still there.  Could GoPro have left something it's messing things up?
  • In this case independent of the output - DVD, mp4 format, etc.
  • If I insert an empty picture at the junction stay video/audio synchronized until the next splice point, when he goes back out of sync.
  • It happened first in PRE9, but I also PRE13 (who reads the PRE9 files) and the problem happening there too, in the same way.

  I am completely puzzled, especially because this same project file perfectly synchronized DVD in the past produced.  Any suggestions will be appreciated.

  R.H.L.

  Thanks for the clarification of your question.

  Complexion all the case is if this problem is limited to a single specific project file.

  Here's what I read since you wrote...

  You say that your audio synchronized to export this file in a project is present for Premiere Elements 9.0/9.0.1 and elements 13/13.1 first.

  These programs do not seem to share/use the same built in programming of the export. And, further, you say that there is this audio desynchronization if burn disk or export the file to one of these versions at this time. Is this correct?

  Even if the problem is not manifest prior to export, which has been described above point to the project file. Have you changed anything in the project settings or export settings in this file of project for good time / wrong time - courses of transitions, component files software plug-in, flow? And you say that look very detailed to the timeline, the content of this one project has revealed no change before and now after? You write

  Would such a program have changed or are damaged?

  From what I just wrote, could the project file has been corrupted, but...

  If you want to look at this as a corruption of program, then you will need to take uninstall, cleaning, reinstall to 9.0/9.0.1 and 13 to dismiss this idea and replace any missing files of exporting program. But, once again, we are dealing with a single project or all your projects with this problem.

  Please consider.

  Thank you.

  RTA

• VIDEO and AUDIO CLIPS not COUPLED in TIMELINE

  I just noticed something in recent weeks, that my audio and video clips become couples in the timeline. But if I press alt + click selects audio and video clips. But a single click selects just the video or audio. I understand that alt + click was chosen, either video or audio to a linked file, it seems now vice versa.

  Can someone explain where I am mistaken here? Is this something to do with track targeting which I am not understand?

  Hi Srukweza,

  Shadreck Rukweza wrote:

  I just noticed something in recent weeks, that my audio and video clips become couples in the timeline. But if I press alt + click selects audio and video clips. But a single click selects just the video or audio. I understand that alt + click was chosen, either video or audio to a linked file, it seems now vice versa.

  Can someone explain where I am mistaken here? Is this something to do with track targeting which I am not understand?

  Looks like you have deselected the selection bound function. Click on the button of the timeline show the screenshot and see if the selection bound has returned.

  

  Thank you

  Kevin

• You can link Audio to any video online of time so it works as if you imported a video with audio?

  Hello...

  I have the video and I recorded also outwardly audio to synchronize with it. Now, I understand that you can drag the video (remove audio sound if there a) then drag an audio clip in the timeline and place it under neath it. I can get it in sync and all this very well.

  The problem I have is that it is cumbersome to change like that. When you import a video with audio integrated if you make a cut, she cut the video AND the audio attached to it at once. If you do it the way I do now you must add additional discounts on the audio file as well. If you double the clicks needed to edit. Also when you are deleting clips and dragging the things about you must be very careful to make sure that the audio and video remains synchronized.

  What I hope is a way to "join" the audio to video with over the addition of a long and tedious process of rendering out to embed a video file with it.

  Solutions, I tried and failed.

  GROUP: That seams like the obvious to make thing... If I consolidate them, I can select them as one, move them as one... but if I select the cutting tool it cut more than video or audio... not both.

  SEQUENCE: The other option I've tried is once it is synchronized, I do a new sequence and add the sequence with the video and sync audo and then change on it. I'm not modify a sequence not the raw audio and video. The problem here is that, while now the cutting tool cuts both video AND audio at the same time and I can also move and edit easily... the problem is that now the dose of waveform appears not in the audio when extend you. It's just a big box of green white (even if there is no audio in the original sequence)

  Any ideas?

  Thank you

  In the timeline panel, select the audio clip and video clip. Go to the menu video > link.

  MtD

• I interrupt my video and audio continues... If I'm still playing once it causes a headache. Help?

  This could be an easy answer, but I do my second video, so I'm not too well informed. Anyway, I imported my video with audio and it plays well back. So I play the video and put paused to try to synchronize the audio. The video stops, but the sound continues to play, and he will not stop until it has played. If I try to start from the beginning again to play the audio for the sort of ignore it, it overlaps just with original sound and noise resulting gives me a headache. I don't know if somehow, I can stop the audio part of the path, but if I can, that would be great. It would be much easier to sync. Thank you!

  You can add keyframes to layer with audio or it restarts the audio.

  Also, when you import audio in a layer, you must click somewhere in the layer (where you see the audio spectrum), glance at your properties panel, hit the sync menu drop-down and select workflow.

• Why did my video clip goes into a video and audio in 5

  Hello

  Adobe CS4, my first video I'm working and my video goes into a video and audio drops to 5 audio, why and how can I fix it. Also, I've added an audio clip and it will onlt go in 5 and will not let me place where I want to. Thanks in advance for your help.

  Eric

  ALT-click

• Premiere Pro 2.0 compatible video and audio formats

  I'm working on a project that uses old clips newreel vintage and such of the 1950s and 60's, they are available for download in different formats.

  I downloaded many of them, but when I import into my calendar, there is no audio for these clips. They work when I play them just out of first. What are the supported formats for first pro 2 in video and audio?

  I did several films but did not come about this before.

  Welcome to the forums.

  The following links will help:

  FAQ: How to import files to the format xyz?

  Can FAQ:how I convert my files?

  FAQ:why are there no sound in my imported MPEG file?

  See you soon
  Eddie

• What is a module secure to download youtube video and audio, something, virus and malware free?

  What is a module secure to download youtube video and audio, something, virus and malware free?

  We are not really discussing comparisons add-on here, but note all formally welcomed the module extensions hosted on addons.mozilla.org and available from the will of the User Interface of Firefox were considered and be safe, secure and virus-free.

  • Use the Menu button-> Add-ons-> [search all add-ons]
    (Or key in the address bar Subject: addons)
  • Search example (you can do a targeted search the better your own machine)
    • With > 5 M high to the users of the list is Video DownloadHelper

  NB. There may be legal as possible & /or copyright with downloading some documents issues, but this is out of scope of this support forum discussion.