CS4 primary & secondary browser

Similar Questions

• Can I add Firefox as a secondary browser?

  I have installed I.E.9 browser and operating system Windows Vista. I said I can install Firefox as a secondary browser & keep I.E.9 as your primary browser.
  I want to know if it's possible and how do I install and switch between browsers?

  Try the full installer and try the install again.

  • http://www.Mozilla.org/en-us/Firefox/all

• Archiving content without defining a primary/secondary file

  Hello!
  
  We use UCM 10 g.
  
  Our customers demand a solution on how to consignment of new without defining a primary file or secondary. He wants only to define metadata, when it is to check in content.
  
  I know that the main file is mandatory. That is why I ask you, if there is a work around for this problem.
  
  Thank you
  Tobi

  Hello

  It's absolutely possible consignment of content without specifying file primary / secondary. Put these config 2 entries in config.cfg, restart UCM and then you can use metadata Checkin only option:

  AllowPrimaryMetaFile = true
  createPrimaryMetaFile = true

  Let me know how it goes.

  Thank you
  Srinath

• Primary/secondary RADIUS server

  Hey all,.

  I tried to find out for awhile how primary and secondary RADIUS servers work about WLC 4400 s. If the primary RADIUS server goes down, and the secondary image is used, when the controller will return to the primary once it is up? He waits until the secondary breaks down, or done immediately switch back to the primary when it becomes available?

  Thanks in advance!

  The f

  On versions 4.2 and earlier, if the principal fails, then the secondary image is used until the secondary level is not available. So if you want the main for the radius server to use purpose, restart the secondary image. Then the tertiary then back to the primary. 5.0 has a feature in which you can define a Dungeon alive so that when the primary comes back upward, the primary will be used again. 5.0 code not a version of good code, however.

• Primary/secondary host

  If two hosts are present in a cluster, how to know if it is primary or secondary?

  Thank you

  Prashant

  Just to make sure, you use vSphere 4.x?

  In vSphere 5, this concept has changed.

• Shortcut to add primary / secondary layer?

  Hello

  I wonder, if there is a shortcut to add a layer of primary or secondary layers stack?  Can't believe that you would need to click on the little + P or + buttons all the time of S.

  I read the PDF shortcuts, but found nothing.

  Am I missing something?

  Thank you.

  I'm afraid, is not a shortcut to create any layer. It is possible with a ranking panel color well.

• New image two servers (primary & secondary) ACS from v5.3 to v5.5?

  Hi, is it possible successfully recreate the image on two ACS servers to v5.3 v5.5, but also successfully restoring backups, licenses and local certificates of v5.3. The Log Collector current is set to primary. I read a lot of documentation that refers only to upgrade railways.

  Recommend making a new image or by using the upgrade method?

  The Upgrade method mentioned that I should spend my primary class in high school, re-point the server logs to the former primary school, etc, etc... Seems a lot of work when a recreate the image might be easier?

  If you could advise on the best possible route, it would be most appreciated... Thank you very much...

  The procedure you mentioned perfect id.

  Rate if useful :)

  Knowledge sharing makes you immortal.

  Kind regards

  Ed

• Why my cron for primary/secondary server does not work, but worked at the prompt of

  I have redhat linux version 5, oracle servers 11 GR 2.
  
  I have cronjobs to monitor the use of tablespace and alert logs.
  
  However they do not work to the task, but if I execute them at the command prompt, it worked.
  
  What could be the problem?
  example cron script:
  Head of the script:
  
  #! / bin/bash
  . / u01/app/Oracle/bin/hydev_env
  MAILTO = "DBA.com"
  LOG=/U01/app/Oracle/dba_cron/out/tablespace_90_full.html
  echo $ORACLE_SID
  sqlplus-s < <-EOF > > / dev/null
  / as sysdba
  
  
  Cron job set is like this:
  
  
  #------------------------TABLESPACES Check------------------------------------------------------------------------
  0.35 * /u01/app/oracle/dba_cron/scripts/tablespaces_over_90%.sh > /u01/app/oracle/dba_cron/out/tablespaces_over_90%.log > 2 > & 1
  
  
  VI/var/spool/mail/oracle:
  
  At the error like this:
  / bin/sh:-c: line 0: about syntax error unexpected token '2'
  / bin/sh:-c: line 0: ' /u01/app/oracle/dba_cron/scripts/chk_ora_alert_all.sh > /u01/app/oracle/dba_cron/out/chk_oracle_alert_all.log > 2 > & 1'
  
  
  Any help guru?

  Hello;

  Usually it is a question of the environment.

  The script works in command prompt, because when you signed on your chosen username environment of a profile settings, for example .bash_profile.

  A crontab task presents no environment. That's why you call hydev_env at the beginning of the script. If something things are missing in your env file especially likely.

  What I do is keep a file for each database in the environment to a place like this:

  / u01/app/Oracle/dba_tool/env (/ u01/app/oracle/dba_tool/env/PRIMARY.env)

  The PRIMARY.env file is .env

  What I keep in there, that's all I need a job like crontab background would need:

  ORACLE_BASE=/u01/app/oracle
  
  ULIMIT=unlimited
  
  ORACLE_SID=PRIMARY
  
  ORACLE_HOME=$ORACLE_BASE/product/11.2.0.2
  
  ORA_NLS33=$ORACLE_HOME/ocommon/nls/admin/data
  
  LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib
  
  LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/lib
  
  LIBPATH=$LD_LIBRARY_PATH:/usr/lib
  
  TNS_ADMIN=$ORACLE_HOME/network/admin
  
  PATH=$ORACLE_HOME/bin:$ORACLE_BASE/dba_tool/bin:/bin:/usr/bin:/usr/ccs/bin:/etc:/usr/sbin:/usr/ucb:$HOME/bin:/usr/bin/X11:/sbin:/usr/lbin:/GNU/bin/make:/u01/app/oracle/dba_tool/bin:/home/oracle/utils/SCRIPTS:/usr/local/bin:.
  
  export TERM=vt100
  
  export ORACLE_BASE ORACLE_SID ORACLE_TERM ULIMIT
  
  export ORACLE_HOME
  
  export LIBPATH LD_LIBRARY_PATH ORA_NLS33
  
  export TNS_ADMIN
  
  export PATH
  
  export MAILTO=
  

  Important If you are not sure, a setting on your system type "env" at a Linux prompt, when you are logged in as user where the script works. Change as needed in your file .env.

  I have here a script call in crontab to check the tablespaces

  #!/bin/bash
  ####################################################################
  #
  
  if [ "$1" ]
  then DBNAME=$1
  else
  echo "basename $0 : Syntax error : use . quickcheck  "
  exit 1
  fi
  
  #
  # Set the Environmental variable for the instance
  #
  . /u01/app/oracle/dba_tool/env/${DBNAME}.env
  #
  #
  
  $ORACLE_HOME/bin/sqlplus /nolog <
  

  Note how I passes the name of the comic as a parameter to the script if I can use the script with several database without changing.

  /U01/app/Oracle/dba_tool/bin/quickCheck.sh primary SCHOOL

  Is the crontab to run every day at 05:12:

  12 05 * /u01/app/oracle/dba_tool/bin/quickcheck.sh PRIMARY > /tmp/quickcheck.out

  Best regards

  mseberg

• need to reorganize primary/secondary servers

  Our QA environment has two NŒUDS RAC as primary (say in Chicago) and two RAC nodes as standby (in Boston).
  
  Now during the test procedures, find the application in primary Chicago too slow connection, so they want to use sleep BOSTON as primary.
  
  How do I reverse them? It is an environment have not yet implemented.
  
  Do I have to use dbca create db on the BOston site standby, and then create the day before the primary site of Chicago?
  
  What is the best way?
  
  Thank you in advance.

  In addition, this new qa environment is not yet put into use. It is my new implementation of AIX for LInux.

  My concern is: team app wants to use Boston as permanent primary. If so, is it better for me to recreate this permanent way that uses Bosoton as main and standby Chicago?

  If its reimplementation, you can create a new database (DBCA), or
  You can perform failover on Boston so that the standby converted as primary, either you can use this new primary or create the database using DBCA.

• Added log file for primary/secondary

  HI: I'm on 10.2.0.3.
  
  I got my first physiacl standby. Now to the reason for the performance, I add a few redo log groups (and increase in size of each) elementary school.
  
  For as far as I understand:
  
  -J' I need to add a log file waiting on the primary for each log online (Group), I would add.
  -J' need to add online log and log sleep on the eve of each primary online journal that I add.
  
  Question: since the addition of balls must be made in the open mode, read would be good for sleep? Or I need to do something else?
  TIA.

  GregX,

  You can add the logfile previous state as well, no need to open read-only mount.

  Concerning

• default gateway, primary/secondary dns subnet mask.

  Were invited to provide the above information, where can I find in the system.

  Hello

  In search prompt press enter type

  now type ipconfig/all hit enter

  You should now have all the information you need to answer the question.

  Please keep in mind that my answer is based on the information in your message. More the better I can answer, Slan go foill, Paul

• Problem of drop-DW CS4 - perhaps the browser problem?

  http://prosol1.com/employment2.html

  Hi - I put this thing drop down together using JS and DW.  The development of the training and the collapse seems to work for me in Chrome and IE but 2 other people tell me that it does not work for them.

  Does anyone have an idea what could be the problem?

  Thank you.

  I can see the problem in IE8 (works fine in IE9).

  Suggest that you post the code before posting again.

• Differences in exchange rates between primary and secondary school in general ledger

  We have a little problem on our hands... we are implementing two great books with display dynamic, primary secondary and Canadian Dollar in USD.
  
  Exchange rate variances occur if for example, we consider significant operations at different points in time. We have no problem at the primary level. However, CAD to USD exchange rates are updated on a monthly basis and most likely, rates change in the month. Therefore, exchange rate differentials would happen frequently in the secondary accounts.
  
  We were asked by senior management, how these gaps would be treated by the EBS. I was wondering if you have any ideas that we are looking at events from accounting to ALS.
  
  Thank you
  
  Sanjib

  If the need was for the balance of the Canada and US dollar, you can use the option of Reporting currency instead of secondary accountant.

  Kind regards
  Chirag

• ISE 1.1 error displaying the home page when looking on the secondary node

  Hello

  I made an ISE installation with a primary and a secondary node - basically, it works very well.

  My problem is when looking on the secondary node e I get a certificate error which pointing to this page looking for the browser gets information from the primary node that makes the browser do not to display info. On the primary, it works fine.

  First I used self-sign certificates, subsequently I installed certificates frm the local certification authority - the problem remained the same.

  I tried with IE, Firefox and Chrome.

  When you change the primary/secondary role, the problem always moved to the real secondary node.

  Anyone an idea what to do here?

  Andreas

  If you use self CERT signed, you must connect to the node seconeary, once you trust cert, you'll be able to see everything on the head node.

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• ISE nodes both become primary

  Hello

  We deploy devices ISE 2 x 3415 for a customer as a cluster of admin primary/secondary. We took the 1.2.0.899 - 5-93975 Version. Everything was going to plan for the deployment and when we manually promote the secondary everything worked fine. Then, we tried a few tests before going into production. We have simulated a failure of the switch port isolated into force our primary ISE. We have promoted our secondary ISE and so we had to then both as primary Admins of the ISE has solved the problem of the switch. At this point it would be good for simply "downgrade" back to secondary school, but this isn't an option. We tried to break the cluster to cancel registration of primary school education. Then, we walked into a situation where we could not completely break the cluster and the end result is that the secondary image shows an internal error 500 (see attachment) and we are unable to browse to the GUI. I think I need to recreate the secondary image now and re - join on the cluster.

  Is it whatever it is documented as to how to recover a situation when the two devices will be primary? Looks like it should be simple enough. Anyone also met the 500 internal error when you attempt to log into the device and if so, how you resolve. CLI all services are running.

  Any help/advice would be appreciated.

  Dean

  I have the same scenario as yours: ise1 Admin/MNT primary and ise2 secondary is Admin/MNT.  ise1 IP is 192.168.1.1/24 and ise2 192.168.1.2/24.  They are both on the same subnet.

  simulate a disaster: stop the switchport ise1 is connected to.

  1. manually promote ise to primary Admin/MNT.  After that, make a bunch of changes to ise2.

  2 bring back ise1.  At this point, the ise1 and the ise2 are indicated as the main administrator

  3 - from the Web UI in ise2, select ise, then press 'sync-up '.  That will force ise1 to become secondary Admin

  4 - once everything is Sync, connect to the ise1 Web interface and manually promote ise1 to become primary Admin/MNT.

  Who is?