Primary/secondary host

Similar Questions

• Archiving content without defining a primary/secondary file

  Hello!
  
  We use UCM 10 g.
  
  Our customers demand a solution on how to consignment of new without defining a primary file or secondary. He wants only to define metadata, when it is to check in content.
  
  I know that the main file is mandatory. That is why I ask you, if there is a work around for this problem.
  
  Thank you
  Tobi

  Hello

  It's absolutely possible consignment of content without specifying file primary / secondary. Put these config 2 entries in config.cfg, restart UCM and then you can use metadata Checkin only option:

  AllowPrimaryMetaFile = true
  createPrimaryMetaFile = true

  Let me know how it goes.

  Thank you
  Srinath

• Primary/secondary RADIUS server

  Hey all,.

  I tried to find out for awhile how primary and secondary RADIUS servers work about WLC 4400 s. If the primary RADIUS server goes down, and the secondary image is used, when the controller will return to the primary once it is up? He waits until the secondary breaks down, or done immediately switch back to the primary when it becomes available?

  Thanks in advance!

  The f

  On versions 4.2 and earlier, if the principal fails, then the secondary image is used until the secondary level is not available. So if you want the main for the radius server to use purpose, restart the secondary image. Then the tertiary then back to the primary. 5.0 has a feature in which you can define a Dungeon alive so that when the primary comes back upward, the primary will be used again. 5.0 code not a version of good code, however.

• CS4 primary & secondary browser

  I have a fresh install of CS4 on a new PC from Win10.

  Dreamweaver browsers primary and secondary are defined but the two (F12, Ctrl F12) same browser (Firefox) go!

  Path locations are:
  Primary: Edge - C:\Windows\explorer.exe

  Secondary: Firefox - C:\Program Files (x 86) \Mozilla Firefox\firefox.exe

  I tried their switching autour (Edge - secondary, Firefox - primary)... did not help.

  2015.2 CC Dreamweaver now recognizes Microsoft Edge, even if it is not registered as the default browser.

  I know this isn't any help at linkot, that is using CS4, but the problem disappeared for creative cloud subscribers.

• Shortcut to add primary / secondary layer?

  Hello

  I wonder, if there is a shortcut to add a layer of primary or secondary layers stack?  Can't believe that you would need to click on the little + P or + buttons all the time of S.

  I read the PDF shortcuts, but found nothing.

  Am I missing something?

  Thank you.

  I'm afraid, is not a shortcut to create any layer. It is possible with a ranking panel color well.

• New image two servers (primary & secondary) ACS from v5.3 to v5.5?

  Hi, is it possible successfully recreate the image on two ACS servers to v5.3 v5.5, but also successfully restoring backups, licenses and local certificates of v5.3. The Log Collector current is set to primary. I read a lot of documentation that refers only to upgrade railways.

  Recommend making a new image or by using the upgrade method?

  The Upgrade method mentioned that I should spend my primary class in high school, re-point the server logs to the former primary school, etc, etc... Seems a lot of work when a recreate the image might be easier?

  If you could advise on the best possible route, it would be most appreciated... Thank you very much...

  The procedure you mentioned perfect id.

  Rate if useful :)

  Knowledge sharing makes you immortal.

  Kind regards

  Ed

• Why my cron for primary/secondary server does not work, but worked at the prompt of

  I have redhat linux version 5, oracle servers 11 GR 2.
  
  I have cronjobs to monitor the use of tablespace and alert logs.
  
  However they do not work to the task, but if I execute them at the command prompt, it worked.
  
  What could be the problem?
  example cron script:
  Head of the script:
  
  #! / bin/bash
  . / u01/app/Oracle/bin/hydev_env
  MAILTO = "DBA.com"
  LOG=/U01/app/Oracle/dba_cron/out/tablespace_90_full.html
  echo $ORACLE_SID
  sqlplus-s < <-EOF > > / dev/null
  / as sysdba
  
  
  Cron job set is like this:
  
  
  #------------------------TABLESPACES Check------------------------------------------------------------------------
  0.35 * /u01/app/oracle/dba_cron/scripts/tablespaces_over_90%.sh > /u01/app/oracle/dba_cron/out/tablespaces_over_90%.log > 2 > & 1
  
  
  VI/var/spool/mail/oracle:
  
  At the error like this:
  / bin/sh:-c: line 0: about syntax error unexpected token '2'
  / bin/sh:-c: line 0: ' /u01/app/oracle/dba_cron/scripts/chk_ora_alert_all.sh > /u01/app/oracle/dba_cron/out/chk_oracle_alert_all.log > 2 > & 1'
  
  
  Any help guru?

  Hello;

  Usually it is a question of the environment.

  The script works in command prompt, because when you signed on your chosen username environment of a profile settings, for example .bash_profile.

  A crontab task presents no environment. That's why you call hydev_env at the beginning of the script. If something things are missing in your env file especially likely.

  What I do is keep a file for each database in the environment to a place like this:

  / u01/app/Oracle/dba_tool/env (/ u01/app/oracle/dba_tool/env/PRIMARY.env)

  The PRIMARY.env file is .env

  What I keep in there, that's all I need a job like crontab background would need:

  ORACLE_BASE=/u01/app/oracle
  
  ULIMIT=unlimited
  
  ORACLE_SID=PRIMARY
  
  ORACLE_HOME=$ORACLE_BASE/product/11.2.0.2
  
  ORA_NLS33=$ORACLE_HOME/ocommon/nls/admin/data
  
  LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib
  
  LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/lib
  
  LIBPATH=$LD_LIBRARY_PATH:/usr/lib
  
  TNS_ADMIN=$ORACLE_HOME/network/admin
  
  PATH=$ORACLE_HOME/bin:$ORACLE_BASE/dba_tool/bin:/bin:/usr/bin:/usr/ccs/bin:/etc:/usr/sbin:/usr/ucb:$HOME/bin:/usr/bin/X11:/sbin:/usr/lbin:/GNU/bin/make:/u01/app/oracle/dba_tool/bin:/home/oracle/utils/SCRIPTS:/usr/local/bin:.
  
  export TERM=vt100
  
  export ORACLE_BASE ORACLE_SID ORACLE_TERM ULIMIT
  
  export ORACLE_HOME
  
  export LIBPATH LD_LIBRARY_PATH ORA_NLS33
  
  export TNS_ADMIN
  
  export PATH
  
  export MAILTO=
  

  Important If you are not sure, a setting on your system type "env" at a Linux prompt, when you are logged in as user where the script works. Change as needed in your file .env.

  I have here a script call in crontab to check the tablespaces

  #!/bin/bash
  ####################################################################
  #
  
  if [ "$1" ]
  then DBNAME=$1
  else
  echo "basename $0 : Syntax error : use . quickcheck  "
  exit 1
  fi
  
  #
  # Set the Environmental variable for the instance
  #
  . /u01/app/oracle/dba_tool/env/${DBNAME}.env
  #
  #
  
  $ORACLE_HOME/bin/sqlplus /nolog <
  

  Note how I passes the name of the comic as a parameter to the script if I can use the script with several database without changing.

  /U01/app/Oracle/dba_tool/bin/quickCheck.sh primary SCHOOL

  Is the crontab to run every day at 05:12:

  12 05 * /u01/app/oracle/dba_tool/bin/quickcheck.sh PRIMARY > /tmp/quickcheck.out

  Best regards

  mseberg

• need to reorganize primary/secondary servers

  Our QA environment has two NŒUDS RAC as primary (say in Chicago) and two RAC nodes as standby (in Boston).
  
  Now during the test procedures, find the application in primary Chicago too slow connection, so they want to use sleep BOSTON as primary.
  
  How do I reverse them? It is an environment have not yet implemented.
  
  Do I have to use dbca create db on the BOston site standby, and then create the day before the primary site of Chicago?
  
  What is the best way?
  
  Thank you in advance.

  In addition, this new qa environment is not yet put into use. It is my new implementation of AIX for LInux.

  My concern is: team app wants to use Boston as permanent primary. If so, is it better for me to recreate this permanent way that uses Bosoton as main and standby Chicago?

  If its reimplementation, you can create a new database (DBCA), or
  You can perform failover on Boston so that the standby converted as primary, either you can use this new primary or create the database using DBCA.

• Added log file for primary/secondary

  HI: I'm on 10.2.0.3.
  
  I got my first physiacl standby. Now to the reason for the performance, I add a few redo log groups (and increase in size of each) elementary school.
  
  For as far as I understand:
  
  -J' I need to add a log file waiting on the primary for each log online (Group), I would add.
  -J' need to add online log and log sleep on the eve of each primary online journal that I add.
  
  Question: since the addition of balls must be made in the open mode, read would be good for sleep? Or I need to do something else?
  TIA.

  GregX,

  You can add the logfile previous state as well, no need to open read-only mount.

  Concerning

• default gateway, primary/secondary dns subnet mask.

  Were invited to provide the above information, where can I find in the system.

  Hello

  In search prompt press enter type

  now type ipconfig/all hit enter

  You should now have all the information you need to answer the question.

  Please keep in mind that my answer is based on the information in your message. More the better I can answer, Slan go foill, Paul

• What happens if all primary hosts die?

  So if all my primary hosts fail, what happens to all the remaining secondary hosts?

  -I assume that they continue to run isolated?

  -Do I need to do anything to recover?  Or just get a primary backup and working again?

  Other hosts will continue to operate, but VMs will not longer protected by HA.

  Here's a detailed how works HA: http://www.yellow-bricks.com/vmware-high-availability-deepdiv/

  ---

  MCSA, MCTS, VCP, VMware vExpert 2009

  http://blog.vadmin.ru

• Differences in exchange rates between primary and secondary school in general ledger

  We have a little problem on our hands... we are implementing two great books with display dynamic, primary secondary and Canadian Dollar in USD.
  
  Exchange rate variances occur if for example, we consider significant operations at different points in time. We have no problem at the primary level. However, CAD to USD exchange rates are updated on a monthly basis and most likely, rates change in the month. Therefore, exchange rate differentials would happen frequently in the secondary accounts.
  
  We were asked by senior management, how these gaps would be treated by the EBS. I was wondering if you have any ideas that we are looking at events from accounting to ALS.
  
  Thank you
  
  Sanjib

  If the need was for the balance of the Canada and US dollar, you can use the option of Reporting currency instead of secondary accountant.

  Kind regards
  Chirag

• Secondary ISE cannot join the head node with error message

  Hello

  I just installed the secondary ISE and made the following points, but when I try to reach the head node, I received the cannot authenticate the primary ISE, please check the server or the certificate and try again.

  -promote the secondary image of autonomous primary

  -export the seconary cert self

  -import the cert in primary school

  -try to add not on the used secondary IP and host with super admin user name

  I noticed one thing that instruction on the ISE 1.1.1 import cert on mentioned primary section:

  1. Choose Administration > system > certificates.
  2. In operations of certificate on the left navigation pane, click certificate authority certificates.

  but there is no certificate authority certificates in the left pane. I chose to store the certificates instead

  

  any suggestions?

  Hello

  Did you put the primary secondary node? You tried to save the node in the wrong direction. To register with the primary node of a node, the application for registration must be initiated from the primary node.

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• VSphere hosts high availability 2

  Hi all

  I am trying to achieve the following by using the essential plus the package. I had 2 identical machines with 2 TB of storage. The two are running ESXI and I want to configure high availability and load the pendulum. From what I've read on for them is that vmware needs shared storage so kind of san if I want to use high availability. But I don't have this machine, what I want to achieve is the following: Vmware reflects the discs on both machines (network raid 1) and if a hardware failure occurred on one of them, the other machine will start all the vm remaining. In the same way vmware should do load balancing. From what I've read on the internet vmware had VSA, but this has been discontinued. VSAN is not an option, because I don't have 3 machines. One possible option would be for example starwind but I would have preferred an option of vmware itself.

  So in short it is a way to configure high availability and load with 2 hosts balancing and not shared storage? Preferably without third party software.

  Kind regards

  Sebastian Wehkamp

  Technically, you can use DRBD and Linux (or FreeBSD and POLE if you're on the dark side of the Moon) to create a device block tolerant replication between a pair of virtual machines running on a hypervisor nodes. Throw in

  failover NFSv4 point mounting on top and you have a nice VMware VM data store. Tons of a defined software storage vendors have exactly this ideology within their virtual storage devices if you do not go to the difference

  However as StarWind Virtual SAN is FREE for the installation of 2 knots in the scenario of VMware (Hyper-V licensing is different if you care) and can be run on a free Hyper-V Server (no need to pay for licenses of Windows), you CAN end up with a faster

  back from road StarWind. Depends on what you want from a set of functionality (iSCSI? NFS? SMB3? Online dedupe? Cache?) and what forum do you prefer for public support to ask questions

  --

  Thank you for your response. I thought that since preparations are exactly the same secondary machine would be able to easily start the vm of lost. For synchronization, I thought it would be something like drbd, when unable to connect with the other secondary hosts will become primary. This works in the case of a hardware failure, and network failure half a brain will take place that must be resolved manually. I play with it replicaton and reconsider the starwind software.

• Impossible to get "to Host FTP Upload" to work.

  I have been searching for this problem literally overnight, tried combinations as much as now, I think that there is so much mess downloaded on my site with accidentally creating folder after folder after folder that I have no idea what to do.

  I bought a domain on GoDaddy last year and have just signed up for DreamHost for hosting. The domain is still registered at GoDaddy, and it's a potential issue cause because I'm not sure I entered the name primary, secondary, tertiary of DreamHost server information, in the right place with GoDaddy.

  

  However, for a moment there when I went to my area, (amandaasher.com), there are a placeholder there to DreamHost so that must be a good sign.

  I guess my first question should be how the hell can I erase all the B.S. that I downloaded on my host in the last 12 hours of sitting here trying to understand? I've been using FileZilla and tried to delete everything, but there was a file that would not remove and I feel like I need to start over at this stage.

  Second question is how to actually use this "Upload FTP host."

  And please, if someone directs me to this article:

  Adobe help Muse | Download a Site from Muse Adobe on a third-party hosting service

  I'll scream. I go back to this thing like 294832 times in the last 12 hours and he a. not. helped.

  

  The first page is going well. I am able to connect very well, and remove the credentials.

  The second page is where sh * hit the fan. Site URL seems pretty obvious, but I have no idea of what to enter in the box "Folder on the server".

  

  To be clear, in time, I tried to understand this point, I tried a lot of things both of these boxes. I tried the URL of the Site, with and without www amandaasher.com area.

  And for the record on the server. At first, I took this quote from the article mentioned above literally "folder is the web directory provided by the hosting provider. This field may be pre-populated; If it does not match the information of your hosting provider, be sure to update. »

  Well, it was not filled prior to me. So I looked on my host site and saw this:

  

  Literally, it says "web directory" and look folder-ish, so I went that in. However, I'm unclear if they intend for me to replace it by "username" to my current username, or leave the word username? So I tried both ways. I also tried as well the top of the page "web directory" (with my user name and the user name Word) and the directory "logs" (still no idea what I'm doing)

  None of them worked, so I tried some examples I could find online. It seemed the thing most common people used 'public_html', but also 'www' and 'httpdocs '.

  I tried all of these things in combination with all these other things.

  As you can imagine, I was several prompted several times by Adobe Muse that these records did not exist, did so I want to create? I said yes. There are many many files at the time wherever I am and still nothing shown on my Web page.

  All these exported completely, but they give me a warning at the end that he had "unexpected response to the query php html" or something like that (I didn't make a screenshot of this, and I get is this message). -What it means and how to fix it?

  I'm not getting that error, but now (since I went with FileZilla and tried to remove a bunch of stuff), I'm stuck in a loop when I try to send the download to your FTP host, it is said:

  

  Seriously, I really think that I messed up. I really just want to start again, but I need to know how to do properly, of course. How can I give me a clean slate to work with?

  Sorry, I'm completely new to this and am fexperienced in.

  Finished figure out but don't know how to delete this.

  For anyone else having this problem, the file on the server for DreamHost was my URL without www and with a / after: amandaasher.com.

  Problem solved.