[CS4 Server Win]: Plugin does not work on Windows Server 2003?

Similar Questions

• Lync 2013 VDI Plugin does not work in Windows 8 with view Horizon 5.4

  Hi all

  I start this new thread as it appears by getting the Lync 2013 VDI Plugin works in Windows 8 is going to be different from that of Windows 7 SP1 and Windows 2008 R2.   The original on Windows 7 and Lync thread is posted here: http://communities.vmware.com/thread/446960?tstart=0

  Here's what I tested and I can determine:

  PC/computer laptop/point of customer #1 endpoint (Client light 10Zig):

  Windows 7 SP1 32-bit

  No installed Office

  Lync VDI 32-bit plugin

  View of the horizon 5.4

  PC/computer laptop/point of customer #2 endpoint (desktop PC):

  64-bit Windows 8

  2013 32-bit Office installed, but the Lync 2013 desktop client is NOT installed

  Lync VDI 32-bit plugin

  View of the horizon 5.4

  VM:

  64-bit Windows 8

  Office 2013 32 bit installed

  Horizon Feature Pack 2 is installed

  Audio redirection works, but the web camera does not have to be picked up.  Its a HD LifeCam Microsoft and is supported by Lync 2010/2013.  I checked the VDI connects to the virtual computer and it seems the plugin Lync VDI successfully syncs.  However, I'm never invited to re - enter my credentials of Lync as I do Windows 7/2008 R2.  In addition, I don't see the 'two PC with the green check mark' in the lower right corner of Lync.  Who should be present after a successful synchronization of Lync VDI.  In fact, there no icons in the lower right corner at all.

  After some further reading, I decided to download and install Skype through shop Windows.  Also, it does not recognize my camera.  In my opinion, the Feature Pack is perhaps the issue here, but I don't know how to dig one more away.  TonyHuynh201110141, any ideas?

  I had a co-worker for his Mac with the new client View 3 trial and Lync VDI works as expected.  I tried again on my side and noticed that it takes exactly 5 minutes to make me a successful pairing.  I remove the Lync VDI plugin, then reinstall to see if that makes a difference.  At least I know that two important data points:

  1 Lync VDI still works

  2. the issue was on only my endpoint device.

  I will update the thread once I know more.

• After clean install of Windows 7, Netflix and Internet TV plugin does not work on Windows Media Center.

  Original title: problem with Windows 7 Media center

  Is there anyway that I can replace the whole C:\Windows\ehome? There is a permissions issue, and I can't find a way to change the permissions...

  The only reason I want to do is I did a clean install of windows 7 and the plugin TV Pluzz.fr and the internet do not work on this computer and it seems to be no work around. But I have a PC where WMC works fine and I can replace the entire record of WMC and it should work like the other PC (I think).

  I could do if I ran linux or something, but I'm looking for something simple or a fix to this problem with WMC.

  Hello

  Thanks for the reply.

  It is too bad to know the steps in my previous post did not help to solve the problem.

  I would like to inform you that starting from September 20, 2012, the experience of Internet TV is no longer available. You can consult the following Microsoft article that has the same information:

  Cannot open Internet TV in Windows Media Center

  http://support.Microsoft.com/kb/2801382/en-us

  For problems with Netflix, I suggest you follow the steps in the Microsoft article and check following:

  http://support.Microsoft.com/kb/972496/en-us

  Also applies to Windows 7.

  Please answer us on the State of the question to help you further.

• My bd dvd win does not work with windows 8.1

  My bd dvd win does not work with windows 8.1

  Hi johnny_k_01, sorry for the confusion, I just need to clarify. What is victory dvd software? or are you talking about the player view dvd itself? It will also be very appreciated if you can provide the name of the model of your device.

• Plugins does not work in After Effects CC15.3

  Everything worked perfectly yesterday. A project of client using some of my favorite plugins like Trapcode Form and particular.

  After update today, would continue my project where I left.

  However, the majority of my plugins disappeared, leaving me unable to progress, short on time.

  I had to completely start over, with a new idea and the standard after effects plugins.

  I tried to reinstall them, but they may not appear.

  Did anyone facing this problem too?

  Can you please help.

  Like HippieBoy, but on Windows 10, I tried to copy the plugins trapcode manually from the

  "C:\Program Files\Adobe\Adobe after effects CC 2015\Support Files\Plug-ins\Trapcode.

  TO

  "C:\Program Files\Adobe\Adobe after effects CC 2015.3\Support Files\Plug-ins\Trapcode."

  and my trapcode plugins where backward. The amazing thing is that I have installed the Plugin Trapcode after having updated to 2015.3 CC. The reason was probably that the Trapcode plugins trial version installed to AE CC 2015 and that the folder was still here the licensed version of Trapcode installed in the old folder.

  Re: Plugins does not work in After Effects CC15.3

  Hope this will help

• Raw plugin does not work

  I just upgraded with Photoshop CC 2015 and the raw plugin does not work.  I get a blank yellow image when I try to access and edit a raw photo.  What can be done to fix this?

  Photoshop and Camera Raw preferences, uncheck the option to use the graphics processor.

• Premiere Pro 5.5 Master Collection does not webM and OGG video files. Even the fnord plugin does not work. What can I do?

  Premiere Pro 5.5 Master Collection does not webM and OGG video files. Even the fnord plugin does not work. What can I do? Furthermore, this is called customer service?

  The simple solution. The file WebM.prm must be left the 6 CS for CS 5.5 folder.

• Google Nik Software plugin does not work

  I just installed your Photoshop CS6 (64-bit) upgrades. Now my Google Nik Software plugin does not work. They give the following dialog box message:

  The 'Silver Efex Pro 2' command is not currently available.

  (use any name plug-in is selected to start in double quotes)

  I use a 64 bit Windows Vista computer. I rebooted and still get the same problem. The elements of the software are always in the Photoshop plugins directory and I get Google Nik software windown open when you start Photoshop. This software was working before I did the upgrade.

  What can I do?

  George Thomas

  Hello! Welcome to the forusm!

  Perhaps, what is happening is that you have only the 32-bit version of the plug-ins.

  Check on the Web of NIK site for 64-bit versions.

• Air Navigator: djvu plugin does not work

  Hello

  I'm building an air Navigator for my business using the component HTML.

  It works very well in general but my company made extensive use of the technology of djvu for viewing of images online.

  Problem: the djvu plugin does not work on the air Navigator. After you have installed the latest version of the plugin (6.1.4) repeat me that it is necessary to install the plugin. (it works well with other browsers, also with google chrome).

  All the world has already met a similar problem?

  Thanks in advance

  Marco

  Hi Marco,.

  unless something has changed between the versions documented limits include:

  -support for the plugin (version 8.1) or later version PDF - with api to check the availability of DURATION if it is available on the machine

  -support for the version of the Flash plugin (without external dependencies)

  So that other plugins are not supported:

  http://livedocs.Adobe.com/Flex/3/HTML/Help.HTML?content=AboutHTMLEnvironment_2.html

  Kind regards

  Peter

• UNC paths does not work in Windows 7 command prompt of the Samba server to a Linux server

  The following command works fine in Windows XP, Windows 2003, etc., but does not work in Windows 7:

  dir \\myhist\myshare

  In Windows 7, it fails with "the system cannot find the file specified."

  Is this a bug or is it a 'work-around '?

  Windows 7 has a different layout of Windows Explorer, then Windows XP and Windows 2003...

  1. go to Windows Explorer and look for the folder

  2. at the top, copy the path, and then try again.

  --
  Gina Whipp
  Microsoft MVP (access)

  Please post all responses on the forum where everyone can enjoy.

• Satellite A505-s6970: Toshiba Service Station does not work on Windows 7

  Hey guys I need your help,

  I installed windows 7 ultimate on my toshiba Satellite A505 s6970 and I downloaded all the drivers from http://www.csd.toshiba.com/ and I installed all.

  When I open the Device Manager, 3 devices are not installed (Base-2 system device / / 1-Unknown device).
  Then I installed toshiba service station (Windows Vista / 7 32-64 bit because my windows is 64) it will search for and automatically download all necessary devices, but it does not work on windows 7, it worked perfectly in windows vista.

  Also the eco utility does not work, and the media touch buttons work just fine, but without giving that voice tone.

  Thanks for your help

  Hello

  To be honest I have no experience with this tool.
  I m using Tempro.

  However, I guess that Toshiba service station was not tested and not designed for Win 7 at the moment.
  You may need to wait for the next update that works correctly with Windows 7.

  You must understand that the Windows 7 drivers have been released in Beta version, it would mean that the final version would be released in the near future
  In my opinion, you should take a look from time to time on the Toshiba page we.
  I noticed that each new day pilot is released and released.

• 1670 CDS satellite - modem does not work on Windows 2000

  Hi-

  I removed the Toshiba W98SE and installed Win 2000 (new installation). I managed to put it on the audio driver using downloads on your website (and it works).

  I do a test on the dial installation upward and that you have installed the modem also since your website (Conexant Soft K56 Data, Fax PCI Modem). This is intended for W98SE but microsoft message is

  The port looks ok. Please advise - is it the right driver?

  Thank you.

  A Windows 98 driver does not work on Windows 2000. Therefore, you need a new driver for Windows 2000.

  I have checked the Toshiba site but your model no available Windows 2000 driver exists.
  I think you have to search the site of the factory of the modem. Maybe you can find a driver or another portable model that has the same modem.

  Good luck!

• Bluetooth does not work on Windows in Satellite C660-A047

  Hello everyone,

  I have a problem with my laptop (satellite c660-A047) Bluetooth does not work on windows (7 and 8), but it works very well under Linux (Ubuntu, Fedora, Backtrack).

  I have an outgoing method :) to do run on windows, start Linux Live then set the Bluetooth adapter to the off State, and then reboot (do not stop, restart only), and then start windows this time this Bluetooth adapter works great and updated automatically in the Device Manager.

  To use Bluetooth on windows I have to do the same steps: (.)

  If someone wants to know all the details to help me solve these curious case, I will be grateful.

  Thanks, looking forward to hearing from you soon.

  The laptop supports Wlan Atheros / module combo BT.
  This means that a single module shares WiFi and BT connectivity.

  Using Win 7 you must add the additional drivers called filter for driver Atheros BT package.
  So first the Atheros WLan driver must be installed, secondly Atheros BT filter after battery Toshiba BT.

  To help to win 8, you must install two components of driver manually to enable the Bluetooth feature: System Toshiba + Atheros Bluetooth driver driver filter
  [Turn on the Bluetooth feature after a clean install of Windows 8 | http://aps2.toshiba-tro.de/kb0/TSB2C03FI0001R04.htm]

• Rich Textbox example does not work in Windows 7

  In the past, I use the example of the Rich Textbox (\samples\userint\activex\richTextxbox.prj) in Windows XP (CVI 2010 SP1).

  Now, I noticed that this example does not work in Windows 7 64 bit because the ActiveX is not registered on the system (see error.jpg).

  This control is not installed by CVI IDE itself?

  How can I get this example to work on my Win 7 64 bit machine?

  Hey Vix

  It seems that the Rich Textbox control component provided by one of the VB Runtime is more included by default with Windows 7.

  I was able to manually record using Regsvr32 ActiveX control as described in the following Microsoft KB.

  I managed to download the ActiveX control needed here and there, you must copy the .ocx for the ActiveX control in your C:\Windows\SysWOW64 directory. Open an administrator command prompt and run "REGSVR32 RICHTX32. OCX'.

  SysWOW64 is the "Windows on Windows" emulation directory which is used for the execution of 32-bit controls in a 64-bit environment.

  I realize this isn't the best solution by making the deployment of applications a little more complicated, another solution would be to use another control ActiveX RTF like the one here: http://www.lebans.com/richtext.htm.

  Thank you

• My on-screen keyboard does not work on Windows 7-32 bit...

  My on-screen keyboard does not work on Windows 7-32 bit...

  It displays error "could not start on-screen keyboard.

  Please help me and tell what to do...

  Hello

  • It worked before?

  I suggest you follow the methods that can help you reslove the problem below.

  Method 1:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2: You can also try to disable and enable the on-screen keyboard and check if it works well or not. So follow the steps:

  1. Press the Win + U keys together to launch the accessibility.
  2. Then click on "Use the computer without a mouse or keyboard" (probably the 3rd option in the list).
  3. Then on the next page, uncheck the box that says "use on-screen keyboard.
  Method 3:

  If this does not work, create a new user account and check. If it works in a new user account, then probably your user account have been damaged and would need a fix.

  Create a user profile

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  Now search for the question.

  Follow the link provided below to fix the damaged user profile.

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  It will be useful. Let us know for help.

  Kind regards

  Ramata Thakur.