CS6 MPG import issues with TMPGEnc Smart Renderer

Similar Questions

• Lightroom Import issues with update

  I'm trying to import into LR.  He began the process but never finished.  Import gets about a quarter of the way through then never complete.  It has been sitting in the same place for several hours.  I tried 4 times.  A few times I had to "Force quit" Lightroom.

  I did the last update CC and done all the usual troubleshooting.  Computer restarted etc...

  I use a Mac more old which is not compatible with the update of the Sierra.  I'm afraid that's the question that nothing has changed since my last import.

  Starting from which you import the files? Camera? Card? Disc? HARD DRIVE?

  Are you able to try another method? Card reader cable

  Are you able to transfer the images to your hard drive via drag and drop in the Finder?

  If so, what happens when you try to import from there?

• Importing issues with Leica SL (type 601)

  Hi, I searched some and did not have much success in debugging a problem that I am having with LR CC (2015,6 release, camera raw 9.6).  When you try to import from an SD card, I get the following error message:

  'The following files were not imported because they could not be read. (1)

  L1000001. DNG»

  screenshot:

  

  This occurs when you are trying to simply 'copy' and also trying to "copy as DNG.  Any ideas would be greatly appreciated.

  I'm working on an iMac running El Cap 10.11.5 with plenty of memory and storage...

  

  Thanks in advance!

  Hi richardault.

  Please ensure that the Panel of destination in the Lightroom Import window is set to a valid location and you have read/write permissions to the location

  Also, make sure the Destination panel is expanded when you click Import.

  

  Kind regards

  Assani

• Using smart rendering under Windows with DNxHD intermediate format.

  I am trying to use effectively the smart rendering on Windows 10 w/latest first. The media entry comes from a Canon EOS 70 d, video shot at 24 fps ALL I have 1920 x 1080.

  My understanding is that I can maximize time encoding by matching the media entry for the output format. By example, if I transcode my Canon is ALL I have footage of DNxHD, I can then put to use sequences found that satisfy the DNxHD, and makes export/encoding of DNxHD super fast, especially if previews exist in DNxHD. I also understand that H.264 is not supported for previews, because it is not reasonable for first and previews format and how they would need be used as output format.

  OK, so I've created which but the usefulness of the workflow in certain circumstances is unclear to me... my goal is to speed up the encoding of video files that I can look at to evaluate where I am in my project, perhaps throughout the day or especially at the end of an important part of the editing work. I used always to create a version of test coded of my project using Ctrl-M or File/Export/output for typical mp4 H.264 files Media. As I understand it, maybe it's not desirable for rapid assessments of the project because the coding may take much more time. My understanding is that in defining the format of sequence overview to match my intermediate format, and using File/Export/Media (CTRL-M) to encode in DNxHD format even, I can greatly speed up the encoding.

  In short, it seems that I am to convert my Canon all THE-I of DNxHD since DNxHD is supported by Adobe sequences in an overview format... This aligns my "edit mode" sequence for DNxHD, where I maintain previews in the same format. I can then CTRL-M encode with "Match sequence settings" to maximize the throughput where two cutscenes DNxHD or preview images DNxHD, emitting the same... the same output format DNxHD...

  That seems to work, things are going faster, but we don't know what I'm supposed to do with the .mxf resulting in some cases that limit the flexibility I had in broadcasting in mp4...

  I mean, is that mxf is a container, I can not play easily on my cell phone or similar, so for the assessment of a project, it seems not usable as a flexible way as an mp4. Even on my desktop, without having to install any other software not Adobe, I can't see a mxf without import in first and viewing in the monitor. It's not horrible, but in this case, I'm just using first as a Media Player for the mxf, he created and which leaves me thinking that I could just pre-made and play the main sequence directly, what is the difference?

  While I'm working on a project, I sometimes, as code it where I can play back a coding of all the days of my project on my phone, laptop or desktop, independent of the first. I guess that made smart will only help insofar as it speeds up encoding in h.264 mp4 etc.

  I feel that I can miss a strategy, I can take here...

  My goal: speed up encoding, but have the ability to create every day mp4 assessments or DNxHD output that I can take with me and discovered on my tablet or mobile phone as you want throughout the day (i.e., as I went out and I have a moment to see what my eyes think where I am with my latest edition which I coded the previous day for example).

  Any thoughts on what I could be missing here, or how I can improve how that I consult the best way for me to use smart rendering?

  Thank you.

  I could just go and play the main sequence directly, what is the difference?

  None, so do it.

  My goal: speed up encoding

  Buy faster hardware.

• Are there known issues with the help of Dreamweaver CS6 on Yosemite?

  Are there known issues with the help of Dreamweaver CS6 on Yosemite? I am considering an upgrade of the Mavericks.

  I don't think so I am still using DWCS4 on Yosemite and it runs like a dream, so I think that DWCS6 would be.

• InDesign cs6 still not compatible with the iMac 5K, his frustration that adobe is not fixing this issue! Perhaps a strategy to move to Adobe CC? I have urgent need to know how can I run the application correctly.

  InDesign cs6 still not compatible with the iMac 5K, his frustration that adobe is not fixing this issue! Perhaps a strategy to move to Adobe CC? I have urgent need to know how can I run the application correctly.

  It will never be updated for InDesign CS6. This has been discussed to death. Adobe updated the CS6 applications that she could update. Illustrator and Photoshop come to mind, so your conspiracy theory is incorrect.

  InDesign should be re-written from scratch due to the difference in the way it was designed.

  Your choice is to live with it or move to creative cloud.

• Are there known issues with the decommissioning of a folio to v20 v24 in CS6?

  Are there known issues with the decommissioning of an app to v20 in CS6?

  our application is v20, we have created the folio initially as v24 but could not get the corresponding app approved by apple, so we rebuilt the folio as a v20 but it errors on the download, ideas?

  You will need to completely recreate the folio.

  Bob

• Since I upgraded to CS6, I had problems with the permissions being changed on my files!

  Since I upgraded to CS6 I had problems with the permissions being changed on my files after that I have download on my server. I don't know how to fix this. My webhosting service says this is an issue on my end and it seems that CS6 has a CS5.5 with no glitch. How can I fix this to happen?

  Have you installed the 12.03 CS6 update yet?

  Adobe - Dreamweaver Support Center: Updaters

  12/12/12 The last update for Adobe Dreamweaver CS6 includes optimizations for the HiDPI screens, improves performance in Code view, rendering Live View and permissions of the FTP transfer problems addresses.

  Don't forget to restart your computer after installing the updates.

  Nancy O.

• Still won't import markers with exit vid first through Media Encoder bluray

  I have a significant video project, just completed, that needs to be taken out DVD and BluRay.  DVDs are made, no problem - three deadlines are each exported queues them in Media Encoder was created. .Xmp sidecar files are produced containing chapter markers and all this matter again without problem, are there chapter markers, DVD burning properly, works on a DVD player, all is good.

  Now for the Blurays... Same process that before, queue the same timelines in Media Encoder, this time only export using the BluRay H264 HD1080i 25, export preset works great, no issues or error messages, but mporting in again (using import as asset, Import Timeline, etc.), I get the error:

  «The metadata. MPEG file parse error» Delete or rename 'E:\YourVid\test.m4v.xmpses' will allow you to import, but markers will be lost. »

  In other words, the markers file is either lack of export crrectly Media Encoder, or the absence of import correctly, or both.

  I've never had this problem before, but this is the first export that I did with the latest versions of first and Media Encoder, IE versions:

  First CC: build a 20141 8.1.0 (81)

  Media Encoder CC: 20141 build 8.1.0.122

  Still, CS6: Version 6.0.2.004

  ... on Win 7 Pro 64-bit

  Can anyone help?  Other people have this problem?  Is this a bug with the latest version of Media Encoder and/or first, or is it just a coincidence and something else is the problem?  And most importantly, is there a reasonable solution (IE other than simply re-do all Chapter markers in Encore?) Can I export first chapter markers in yet another way?

  Help, please!

  As SOUL 8.1.0 submitted bug report.

  Export of H.264 - bluray TEA (and PR 8.1.0) creates a xmpses file that contains an xml error. This translates to an import failed in yet.

  The error is after the marker section in the xmpses file:
  Length > 0

  The tag must be , and the rest of the production which I assume must be in the file is missing.

  One solution is to edit the xml code in the file xmpses. be sure to use Notepad or similar and not words to make changes.

  The affected code is at the end of the file. (It should not be the end, the output to the file is obviously truncated compared to the output of the previous versions.)

  The code ends with this, where, I guess, the number of streamsize is specific for the exported file:

  Length > 0
  94971497

  Remove "length > 0".

  It therefore appears as:

  94971497

  This allows the import still with intact chapter markers.

  I don't know if this will create other problems.

• Flash Pro CS6 - export the Sprite with EaselJS JSON Data sheet

  Hello

  I have imported a png sequence into Flash Pro and tried to get the new generation of spreadsheet sprite functionality to export JSON data in EaselJS format, but when I choose the option EaselJS in the drop-down menu, I only get a window function:

  
  

  (function (window) {}

  (} (window));

  However, when I export to JSON format, I get the appropriate JSON data.  Is this a known issue with the support of EaselJS in CS6, or should I do something differently?  I prefer not to use Zoe, the SWF file to the usefulness of the AIR EaselJS, because the png is large enough and Zoe seems to have a cap of maximum dimension for the export of sprite sheets, I get 12 of them while Flash Pro is able to automatically detect dimensions, export a sprite sheet, which is great, I just need to generate the data EaselJS with her.  Thanks in advance!

  try to use a movieclip with some symbols on the timeline?

• Problems with the Smart keyboard (iPad 9.7 Pro)

  I recently bought the iPad Pro 9.7 inches, gray space, Wifi, 128 GB. IOS 9.3.1 of the operating system.

  A few questions that I met in my four days of using the iPad with the Smart keyboard:

  NOTE: the following problems persist despite a technical support call which lasted, I did 2 hours and 30 minutes. I had to restore my iPad settings by connecting to iTunes via my PC to reinstall the last iOS.

  (i) switching applications: if I want to pass, say, from safari to adobe, it is quite easy to do with the keyboard. However, there is an intermittent problem when the apps. When I try to open Adobe when I use safari, the screen of the iPad shows apps that are open as soon as I press the command and tab key.

  What is supposed to happen - I choose to open Adobe, Adobe opens.

  What happens to the contrary - Adobe does not open. Another "X" application that is currently running, opens. It is quite frustrating, because there is no pattern to this. If I use once more the keyboard shortcut to open Adobe, another application 'Y' which is running, open it now.

  In this case, I pointed out, often when the App Store is running.

  (II) command key: sometimes, shortly after I use the shortcut keys to turn on screen shortcut area (pop-up shortcut) - apps, this is supposed to happen if and only if you press and hold down the command key.

  This often happens when I switch to Safari.

  (III) keyboard not responding: a problem that I met today for the first time. My keyboard will not just respond. I had to disconnect and reconnect the keyboard for this function.

  (IV) on which the space key: to wake up the iPad, pressing the SPACEBAR is enough. You don't have to press the home button. Yet, sometimes the space key does not respond and you must use the home button.

  v) Quick app - keyboard shortcut crash switch function causes: if I want to switch from app to app 'X' 'Y', but mistakenly switch to 'Z' app, I immediately want to spend to 'Y '. However, I can't do this in quick succession. I have to wait a second or two before I can switch from 'Y' 'Z' app, otherwise the automatic switching app crashes and you have to wait once more for a second or two before moving on.

  My diagnosis:

  (I) it could be a problem with the smart connector on my iPad. A hardware problem. But it does not explain why the automatic switching app appears and passes correctly but eventually open the wrong applications. Also, it does not explain why the problem is intermittent.

  (II) a software problem. However, that would make me a face 5 questions at once. Sort of. I was surprised that, apart from the question of #3 and #4, there was almost no mention of other issues.

  To restart the iPad or to disconnect and reconnect the keyboard. But I don't think that anyone would be willing to do this 4 - 5 times on a daily basis.

  Update:

  So I used my keyboard all day yesterday without opening the App Store. And guess what? It has been working perfectly. All the above problems I mentioned were not available yesterday. I'll use the App Store today and let it run in the background to see how does my iPad.

• Tried to password - protect folders (VERY important issues) and now cannot find/access them at all!

  That's what I had to do what I did:

  http://www.AddictiveTips.com/Windows-Tips/how-to-lock-and-password-protect-folder-in-Vista/

  Clearly, I clicked too much / the wrong thing, because these very important issues (for my work) are now completely inaccessible for me. This is not correct. I need them to work. Can someone help me please? (I feel like such a fool!)

  I tried restoring the system (twice) and nothing has changed. I have google and google to try to find a way to fix this, but so far have gotten nowhere! I'm a sort of panic... hoping someone can help me!

  So what (s) you refuse permissions on this folder? If deny you permissions to everyone, then of course your own username has been included in this group. Out of this is to start the computer with a Linux Live CD or USB key and the copy of the data in the files to external media such as a disk external hard USB or USB key. Linux will not honor Windows permissions. Then delete the files while in Linux. If all goes well, they are not system folders but are only folders you have created yourself. Then start in Windows, create new folders, copy your data to them. If you explain what and where are the files and what restrictions you want to give, we can help you to do this properly.

  http://Lifehacker.com/5504531/the-complete-guide-to-saving-your-Windows-system-with-a-thumb-drive
  http://www.howtogeek.com/HOWTO/17044/move-files-from-a-failing-PC-with-an-Ubuntu-Live-CD/
  https://help.Ubuntu.com/community/LiveCD
  http://www.Knoppix.NET

  MS - MVP - Elephant Boy computers - don't panic!

• Cannot save the new DA with Cisco Smart Net Total Care

  I get the following error when configuring a Director of several browsers. I also cleared my browser cache.  Any ideas to go beyond this issue?

  "We encountered an error while processing your request. Please refresh this page or try again. »

  It was first recording attempt of DA, but group account has been used and we got after the support response:

  Thank you for your request to become a Managing Director for Smart Net Total Care. Unfortunately, this application using what appears to be a shared account. Cisco access policy requires that each account is associated with a single person, and this policy must be strictly applied when this account is used to manage access to other accounts. Smart Net Total Care registration must be performed by a competent person, using their individual Cisco.com account that clearly identifies them by name. Please re - submit a new registration request online by using your individual Cisco.com user ID. Once this request is received, we will proceed with your Smart NET Care total integration.

  Maybe there's some cleaning must be performed in the database before the client can retry to register?

  Best regards

  Resad

• Smart rendering m2v tried, but had full encode

  For a production of DVD, I have a m2v + wav file-pair, generated from first. I put in a new project, created a new sequence for the m2v file (by dragging the m2v to new button file).  Also, I checked the audio format is the WAV file.  Then I added (by right ' cut' on the timeline) a notice of copyright in the same (m2v + WAV) formats.

  When I then file > export to generate the same kind of m2v + pair of WAV file (be it in 'match sequence settings' or by selecting same presets as I had used it earlier), I was expecting a 'smart render"i.e. renovation, but on the contrary had plenty-coding (e.g. 80% CPU).  I checked this by forcing the full coding by adding a video effect, after which the export took the same duration.

  Is it possible to activate m2v-m2v made smart >?

  First version 7.2.1.  Not wanting to update I'm mid-project.

  First does not have smart render to mpeg2.

  Can read this:
  Smart Rendering in Premiere Pro CS6 (6.0.1 and later), & first Pro CC

• project import/export with child components

  We are at ODI 10.1.3.5. We exported again project with children DEV instance components and wanted to import the XML file that was exported in the TEST instance using the synonym INSERT mode. We have some of the interfaces whose names are identical in the different old project instances DEV and TEST. If import us the new XML project file in the TEST instance with synonym INSERT, it causes a problem? What is the best approach to deal with import/export between different instances when the object names are the same between projects? I would be grateful if someone responds with suggestions.
  
  Thanks in advance
  VK

  It is not really important that the names are the same. Each object in ODI is assigned a unique object ID and this is what is used when an import is performed in order to determine the measures taken in the repsitory of the target. As long as this ID does not match an ID that already exists in your target repository, then you will be ok if you use synonym insert, although I suggest using synonym Insert/Update. Part of the object ID is the ID of the repository that being exported from the origin, so as long as you repsitory unique ID across your environments (basic good practices), you should not type any important issue-based.