Smart rendering m2v tried, but had full encode

Similar Questions

• Can someone help me? I am trying to download iMovie which normally should be free with other Apple applications, but for full reason he always says that I have to pay for it. And I Shen a brand-new iPhone updated to IOS 9 5s. Can someone give me advice on

  Can someone help me? I am trying to download iMovie which normally should be free with other Apple applications, but for full reason he always says that I have to pay for it. And I Shen a brand-new iPhone updated to IOS 9 5s. Can someone give me advice on what to do?

  iMovie and iLife and iworks Apps are free with the purchase of a new device.

  Since Apple is no longer selling the iPhone 5 s, she cannot be considered more for free apps.

  However, just to be safe, disconnect you from the iTunes and App Stores-> Apple ID in the settings on the new iPhone 5 s, then reset the iPhone in now the home and power buttons together for 10 to 15 seconds. Let the iPhone reboot and then sign in with your Apple ID in iTunes and the App Store and try to get the Apps again.

• had two versions of the program, uninstalled oldest, tried to use the one installed but had windows message reconfiguration.

  had two versions of the program, uninstalled oldest, tried to use the one installed but had windows message reconfiguration. nothing seems to be the case so I cancelled the operation. Now, I can not reinstall or uninstall for the program is open. Help!

  Looks like you may have a virus or other malware. Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

  Microsoft has suggestions and offerings to

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  Moderator Forum Keith has a few suggestions along this line to

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.  Good luck.

• Some time ago I bought ADOBE production Premium Windows CS6. At the time where I actually responsible programs without any problems. Since then I have loaded windows 10 and lost the programs but had already saved the ZIP files.  I tried to load programs

  Some time ago I bought ADOBE production Premium Windows CS6.

  At the time where I actually responsible programs without any problems.

  Since then I have loaded Windows 10 and lost the programs but had already

  Saved files from the ZIP.

  I tried to load the programs today, but I get the following message

  Please insert Adobe Production Premium Disc UM6 - MUL

  Because it was a download, it is not a loading disk.

  Make a new download

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

  -Cloud desktop http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html

  -Cloud Getting Started https://helpx.adobe.com/creative-cloud.html

  -you will need to enter your original serial number during the installation for non-Cloud programs

  - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

• Download a pdf file, but had to rotate the view to read... But wouldn't stay in rotation seen after I saved and tried to reopen

  Download a pdf file, but had to rotate the view to read... But wouldn't stay in rotation seen after I saved and tried to reopen

  Hi anthea11,

  You will need Acrobat free trial download Adobe Acrobat application | Acrobat Pro DC to rotate the PDF rotate, move, delete and renumber pages in Adobe Acrobat PDF or you can also subscribe to the Adobe PDF package using Adobe OrganizePages service https://cloud.acrobat.com/organizepages

  Kind regards
  Nicos

• I tried to update my Lightroom CC to get the menu effects and fog. Once I did nothing worked! No Lightroom or Photoshop I chatted with adobe online assistance and she finally got both working again but had to wipe everything and reinstall.

  I tried to update my Lightroom CC to get the menu effects and fog. Once I did nothing worked! No Lightroom or Photoshop I chatted with adobe online assistance and she finally got both working again but had to wipe everything and reinstall.  Now I sometimes have a 'demo' of Photoshop and the same version of Lightroom CC without de-haze. In addition, I can't use these programs in offline mode - I have to keep signed in Creative cloud - I don't have this problem before.  Any ideas before once more involved with a cat onlaine?  Thank you...

  Raeburn, if you get the trial version, make sure that you are connected to creative cloud. Here's what you can try.

  • Sign in to creative cloud.
  • Disconnect from the Internet.
  • Try to use Lightroom and check if you get a trial version.

  Note: Please make sure that you are not disconnected from the creative clouds.

  You can check: why I am forced to connect to CC, when I bought a stand-alone license for Lightroom 6?

• I'm trying to open Media Encoder - but without success

  I'm trying to open Media Encoder - but without success. He use to work perfect

  When I start it up, he tells me he's going clouse downwards. What can I do to restore the program?

  Media Encoder is CS6

  Windows 7

  Can you try to keep Alt + Ctrl (Win) cmd (Mac) + SHIFT while launching the SOUL?  This clears the application preferences and can help.

• Using smart rendering under Windows with DNxHD intermediate format.

  I am trying to use effectively the smart rendering on Windows 10 w/latest first. The media entry comes from a Canon EOS 70 d, video shot at 24 fps ALL I have 1920 x 1080.

  My understanding is that I can maximize time encoding by matching the media entry for the output format. By example, if I transcode my Canon is ALL I have footage of DNxHD, I can then put to use sequences found that satisfy the DNxHD, and makes export/encoding of DNxHD super fast, especially if previews exist in DNxHD. I also understand that H.264 is not supported for previews, because it is not reasonable for first and previews format and how they would need be used as output format.

  OK, so I've created which but the usefulness of the workflow in certain circumstances is unclear to me... my goal is to speed up the encoding of video files that I can look at to evaluate where I am in my project, perhaps throughout the day or especially at the end of an important part of the editing work. I used always to create a version of test coded of my project using Ctrl-M or File/Export/output for typical mp4 H.264 files Media. As I understand it, maybe it's not desirable for rapid assessments of the project because the coding may take much more time. My understanding is that in defining the format of sequence overview to match my intermediate format, and using File/Export/Media (CTRL-M) to encode in DNxHD format even, I can greatly speed up the encoding.

  In short, it seems that I am to convert my Canon all THE-I of DNxHD since DNxHD is supported by Adobe sequences in an overview format... This aligns my "edit mode" sequence for DNxHD, where I maintain previews in the same format. I can then CTRL-M encode with "Match sequence settings" to maximize the throughput where two cutscenes DNxHD or preview images DNxHD, emitting the same... the same output format DNxHD...

  That seems to work, things are going faster, but we don't know what I'm supposed to do with the .mxf resulting in some cases that limit the flexibility I had in broadcasting in mp4...

  I mean, is that mxf is a container, I can not play easily on my cell phone or similar, so for the assessment of a project, it seems not usable as a flexible way as an mp4. Even on my desktop, without having to install any other software not Adobe, I can't see a mxf without import in first and viewing in the monitor. It's not horrible, but in this case, I'm just using first as a Media Player for the mxf, he created and which leaves me thinking that I could just pre-made and play the main sequence directly, what is the difference?

  While I'm working on a project, I sometimes, as code it where I can play back a coding of all the days of my project on my phone, laptop or desktop, independent of the first. I guess that made smart will only help insofar as it speeds up encoding in h.264 mp4 etc.

  I feel that I can miss a strategy, I can take here...

  My goal: speed up encoding, but have the ability to create every day mp4 assessments or DNxHD output that I can take with me and discovered on my tablet or mobile phone as you want throughout the day (i.e., as I went out and I have a moment to see what my eyes think where I am with my latest edition which I coded the previous day for example).

  Any thoughts on what I could be missing here, or how I can improve how that I consult the best way for me to use smart rendering?

  Thank you.

  I could just go and play the main sequence directly, what is the difference?

  None, so do it.

  My goal: speed up encoding

  Buy faster hardware.

• CS6 MPG import issues with TMPGEnc Smart Renderer

  I was wondering if anyone else has experienced this problem and has a solution.

  TMPGEnc Smart Renderer 4.1.5 is a tool that allows the cutting of level framework of MPEG2 stream while performing a minimum of coding. I use this tool to cut scenes of the DVD source material. A cut scene is important in Premiere Pro CS6 with no error message. When I see it in the source monitor, the 3 first seconds playing very well but after that the image is deformed and loses audio synchronization. I will attach a few pictures to show the beginning and deformed.

  This happens regardless of what source DVD is used. The clip source plays well in any player I have (windows, VLC media player).

  

  

  Media information

  

  I tried your sample in CS6 and get a picture blurry even after a few seconds. And its out of sync.

• I'm unable to access my Linksys router using Firefox browser version 9.0.1, but had no problem with knowledge is this normal or is there compatibility with Firefox problems?

  I am new to the Firefox browser and just tried to configure my Linksys router using Firefox and could not access my router, but had no problem with Internet Explorer. I was wondering is - this normal or there at - it set I can are wrong to use Firefox to fix my router?

  If you have the NoScript extension or other blocking JavaScript extensions (addons > Extensions), you must allow (or temporarily allow) the IP address of your router. Any particular setting should be held in Firefox itself.

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• Please PLEASE help - I have Genuine Windows but had 2 re - install it n now I can't validate cuz this - > unfinished Validation: ActiveX error with error code [0 x 80080296] .__What can do? Thank you n God bless.

  Please PLEASE help - I have Genuine Windows but had 2 re - install it n now I can't validate cuz this---> Validation incomplete: ActiveX error with error code [0 x 80080296].
  What can I do? Thank you n God bless.

  Quote your full version of Windows (for example, WinXP SP3;) Vista SP1; Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup. Please do it in your next reply.

  What problems do you think that reinstalling Windows can solve?

  Did you do a repair installation, or you format and do a clean install?

  =================================

  Please go to http://www.microsoft.com/genuine/ and click on the button to validate Windows, and then restart your computer.

  If you were not able to validate, follow these steps:

  1. Download this diagnostic tool, save it to your desktop: http://go.microsoft.com/fwlink/?linkid=56062

  -Online Windows XP: double-click the executable file to run the tool.

  -Online Vista & Win7: right-click on the executable and select run as administrator to run the tool.

  2. after running the tool, click the Windows tab, and then click the copy button (on the Clipboard).

  NB: You can open a new file in Notepad, paste the contents of the Clipboard in it & keep for future reference.

  3 start a new post in the appropriate forum of Microsoft Genuine Advantage and paste the results of the WGA diagnostic data in a detailed post: http://social.microsoft.com/Forums/en-US/category/genuine

  4 Troubleshooting specialist will analyze the data and recommend an appropriate solution.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Can Windows Media Player XP play MTS file type? I tried, but the video does not play smoothly. Is this fix really?

  I tried, but the video does not play smoothly.  Is this fix really?

  There is a possibility that Windows Media Player could
  read the file if you rename the MTS to MPG or AVI.

  And/or...the suite of freeware Media Player can be
  worth a try.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Media Player Classic Home Cinema
  http://MajorGeeks.com/Media_Player_Classic_Home_Cinema_d6213.html
  (works on XP/Vista/7)
  (The name of the file to download is: "MPC - HomeCinema.1.5.2.3456.x 86 .exe ')

  If this fails, it may be worth trying to convert the MTS file
  WMV format:

  There are many converters available on the net... some
  free... some detail.

  The following freeware converters are a few examples:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  (1) Sothink Free Video Converter
  http://www.Sothinkmedia.com/video-converter/
  (Windows XP / Vista / 7)

  You will need to unzip the file... or you could just drag
  the Setup.exe from the file out of the folder and drop it on your
  desktop and install from there.

  Once installed... Open Sothink and go to... Add the files button...
  Find and select the clips you want to convert.

  Next... in the encoding settings... Choose... Video credits.
  WMV - Windows Media Video (*.wmv).

  Choose an output folder and on the left, click on the button convert.

  You can experiment with other settings later but
  This should help you get started.

  (2) format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup270.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag FFSetup270.exe out of the folder
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

• What deletion XMLSchema received the error ORA-04022 no waiting asked, but had to wait to lock the dictionary objects

  I recorded a XMLschem in the Oracle XDB repository to load the XML file into the oracle tables using storage relational object. In this process, I'm trying to remove the xmlschema to sign up again with a few changes in the XSD file, but I'm not able to remove it and I get the error ORA 04022 no waiting asked, but had to wait to lock the dictionary objects... Before that, I deleted the xmlschem 2 - 3 times and it worked fine. But now I have this error.

  I tried to remove it with "DELETE_CASCADE" and also tried "DELETE_CASCADE_FORCE" and in both cases, I get the same error.

  I've waited 2-3 days and then retried still had the same error.

  Could you please help me to solve this problem.

  Here is the screenshot of the error

  

  I also tried to purge the schema, as shown below, but I get the error access denied. I'm stuck here, could not move before working on it.

  Select * from dba_xml_schemas, where qual_schema_url like '% HPO484% '; -1B01B74F95BE1C91E0540021287E70DC

  BEGIN

  DBMS_XMLSCHEMA. PURGESCHEMA (schema_id = > '1B01B74F95BE1C91E0540021287E70DC');

  END;

  It throws below error

  ORA-31050: access denied

  ORA-06512: at "XDB". DBMS_XMLSCHEMA", line 109

  ORA-06512: at line 1

  Could you please help me with this.

  Thank you

  Reva

  Is it possible to reproduce the problem?

  You have a table that references the schema?

  Check with your DBA if there is no locking assets library.

• I have been a member of the CC, but had to leave for financial reasons. I have re installed my old version of CS6, but I get a pop up blocking my access to the program and telling me to renew my membership. What can I do?

  I have been a member of the CC, but had to leave for financial reasons. I have re installed my old version of CS6, but I get a pop up blocking my access to the program and telling me to renew my membership. What can I do?

  You are right!

  Try to uninstall the full CS6 using Adobe - Adobe CS5 Clean Tool and then install it via applications download Creative Suite 6

  Hope that helps!

• I want to change my MacBook, but I can not connect at all to my account. It won't even show the mask connection on page of adobes, safari keeps trying but fails.

  I want to change my MacBook, but I can not connect at all to my account. it won't even show the mask connection on page of adobes, safari keeps trying but it keeps research fail.: https://IMS-NA1.adobelogin.com/IMS/authorize/ ... but nothing happens. Not on my computer, not on the mobile phone. the same problem. Cookies are okay and I never had this problem before.

  Hi Rahel,

  Please see Creative Coud connection errors

  Hope that helps!

  Kind regards

  Sheena