CSA issues

Similar Questions

• "THIS APPLICATION CAN RUN ON YOUR PC.

  THIS APPLICATION CAN RUN ON YOUR PC

  
  

  To find a version of your PC, check with the software publisher

  I was looking to solve this problem. Don't even dare to send me to the b.s troubleshooter. I can't install it. I tried not to read the forums no good answer. So now what.

  It is impossible to download itunes? If this is not the case, how can I do?

  Come on nerds. It is a challenge for you all. You're smart nerds nerds or dummy?
  

  Write effective CSA issues (prepared by John Galt)

  https://discussions.Apple.com/docs/doc-5931

• I can't get my App store

  I can't get my App store

  I can.

  Write effective CSA issues (prepared by John Galt)

  https://discussions.Apple.com/docs/doc-5931

• What happened to this known issue with the AIR 18?  Is it fixed? (CSA 2.0, type coercion: 3578605)

  In the recent past, the three ads documented SDK 18 AIR outlet some known problem:

  • ASC2.0 update app reports an error of Type with MovieClips CFC constraint (3578605)

  (For reference: 09/06/2015 - news release - 18 AIR Runtime and SDK |) 08/07/2015 - shared - AIR 18 Runtime and SDK | ( 11/08/2015 - shared - AIR 18 Runtime and SDK )

  Last week, the announcement of the AIR SDK 19 (21/09/2015 - release - 19 AIR Runtime and SDK) there is no mention of whether this is still a known issue or a fixed.  It's a hard problem to test, and it would be good to know if Adobe believes that this issue has now been addressed. (Or... If someone else in the community has evidence suggesting that this problem has been fixed, which would be also good to know!)

  In addition, it would be useful if someone could tell me if this internal bug in question (3578605), corresponds to this public one: Bug #3562040-2.0 app compiled CSA Type coercion report crashes with MovieClips in CFC

  Thank you

  Russell

  Hi Russell,

  This is still a known issue and that I plead.  We had security of mitigation (in other areas) which had priority over that in our press releases press.  He put open/tofix in our database bug with a priority 4/4 and (higher) gravity and I hope we can come back soon.

  Thank you

  Chris

• Y510p Trackpad driver issues on Windows 7

  I recently bought a Lenovo Y510p. Soon after receiving it, I wiped Windows 8 and installed Windows 7. I downloaded all the Windows 7 required drivers on the Lenovo support site and install without any problems. The problem I have is that most of the time the driver for the trackpad momentum seems to have issues. Device Manager acknowledges the mouse as a generic PS/2 mouse and the options of the momentum, under control panel > mouse is not CSA listed at all.

  I found a temporary solution to the problem. Uninstalling the drivers through the Device Manager, reboot, then install drivers the momentum of the Lenovo site, then reboot, I was able to get the mouse appears in the momentum Control Panel, where I could finally set my parameters. However, after my next reboot, the mouse was absent from the Panel momentum once more, and now I'm at square. I tried the solution that had previously worked, but I got no results.

  Anyone has any ideas or similar problems that they resolved?

  JacobT14 wrote:
  Altogether. First of all, I used http://mobilesupport.lenovo.com/us/en/downloads/ds035849 , this one, but noticed that also contained the Synaptics driver. So I downloaded this a http://www.station-drivers.com/index.php/downloads/Drivers/Elan/Elan-TouchPad-Drivers-Version-11.10... on the recommendation of a thread, I found somewhere (could be Lenovo forums, but I do not quite remember). You use the latter driver, I was able to recognize the trackpad once, but then, as I said, after I rebooted, it was gone.

  When you install the driver of Lenovo, you uncheck "install Synaptics... » ? Then install the expanded driver located in the C:\drivers\ folder...?

• Finder - content issue not presented

  I had a problem with the finder long even with the Mavericks and now with v10.11.1 El Capitan

  I don't know what's happening that this occurs, but I am sure it starts happening after a while that my Mac is started (I restart not often, but every time I do that bug fix this issue, also restart the Finder).

  The problem is that I'm not able to see the content in the Finder, unless I have switch to another tab and return to the previous tab.

  

  1. the present proceedings is a diagnostic test. It doesn't change anything for the better or worse and therefore, by itself, will not solve the problem. But with the help of the results of the tests, the solution may take a few minutes, instead of hours or days.

  The test works on OS X 10.7 ("Lion") and later versions. I do not recommend running it on older versions of Mac OS X. It will do no harm, but it will not do not much good.

  Do not be put off by the complexity of these instructions. The process is much less complicated than the description. You make the tasks more complicated with the computer all the time.

  2. If you have already a current backup backup all data before doing anything else. The backup is needed on the general principle, not because of what anyone in the test procedure. Backup is always a must, and when you encounter any kind of problems with the computer, you can be more than the usual loss of data, if you follow these instructions or risk not.

  There are ways to back up a computer that is not fully functional. Ask if you need advice.

  3 here is instructions to run a UNIX shell script, a type of program. As I wrote above, it doesn't change anything. It does not send or receive data over the network. There is no to generate a report on the State of the computer human readable. This report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents for me or someone else.

  You should ask yourself if you can believe me, and if it is safe to run a program at the request of a foreign national. In general, no, he's not sure, and I encourage it.

  In this case, however, there are ways for you to decide if the program is safe without having to trust me. First of all, you can read it. Unlike an application that download you and click to start, it is transparent, so any person with the required competence can check what it does.

  You may not be able to understand the script yourself. But variations of it have been posted on this site of thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. One of the million registered users to have read the script and set off the alarm if it was dangerous. Then I wouldn't be here now, and you would not be reading this message. See, e.g., this discussion.

  Another indication that the test is safe in this threadand this onecan be found, for example, where the comment in which I suggested it was recommended by one of the specialists of the communityApple, as explained here.

  However, if you cannot satisfy yourself that these instructions are safe, do not follow them. Ask other solutions.

  4. here is a general summary of what you need to do, if you decide to go forward:

  ☞ Copy a particular line of text to the Clipboard.

  ☞ Paste into the window to another application.

  ☞ Wait for the test to run. It usually takes a few minutes.

  ☞ Stick the results, which will be copied automatically, in a response on this page.

  These are not specific instructions; just a glimpse. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait and paste it again. You don't need to copy a second time.

  5. try to test in conditions that replicate the problem, to the extent possible. For example, if the computer is slow intermittently, run the test during a downturn.

  You may have started up in safe mode. If the system is now in safe mode and works pretty well in normal mode to test run, restart as usual before running it. If you can test only in safe mode, this.

  6. If you have more than one user and a user is affected by the problem, and the user is not an administrator, and then run the test twice: once under the affected user and one administrator. The results can be different. The user that is created automatically on a new computer, when you start it for the first time is an administrator. If you are unable to log in as an administrator, verify that the user concerned. More personal Mac have only one user, and in this case this section does not apply. Don't log in as root.

  7 load the linked web page (the site "Pastebin.") The title of the page is 'Diagnostic Test'. Under the title is a text box, headed by three small icons. The right one represents a Clipboard. Click on this icon to select the text, then copy to the Clipboard of your computer by pressing Control-C key combination.

  If the text is not highlighted when you click the icon, select it in triple - click anywhere inside the box. Do not select the whole page, just the text in the box.

  8. start the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing Command + V, then press return. The text that you pasted should disappear immediately.

  9. If you see an error message in the Terminal as "Syntax error" or "Event not found", enter

  exec bash

  and press return. Then paste the script again.

  10. If you logged in as an administrator, you will be prompted for your login password. Nothing displayed when you type. You won't see the usual points instead of the characters typed. Make sure that caps lock is turned off. Type carefully, and then press return. You can get a warning to be careful. If you make three unsuccessful attempts to enter the password, the test is still running, but it will produce less information. If you do not know the password, or if you prefer not to enter, just press back three times at the password prompt. Yet once again, the script will run.

  If the test takes much longer that usual to run because the computer is very slow, you can be prompted for your password a second time. The permission you grant by entering it will expire automatically after five minutes.

  If you are not logged as an administrator, you will be prompted for a password. The test will run. It just will not do anything that requires administrator privileges.

  11. the test may take a few minutes to run, depending on the number of files you have and the speed of the computer. A computer that is abnormally slow may take more time to run the test. During execution, a series of lines is displayed in the Terminal window like this:

  [Process started]

          Part 1 of 4 done at … sec        …        Part 4 of 4 done at … sec

          The test results are on the Clipboard.

          Please close this window.

  [Process completed]

  The intervals between the parties will not be exactly the same, but they give an approximate indication of progress.

  Wait for the final "Process complete" message. If you don't see it in about 15 minutes, the test probably won't be all within a reasonable time. In this case, press the Ctrl + C key combination or the point command to stop it. Then go to the next step. You will have incomplete results, but still something. If you close the window of the Terminal, while the test is still running, the partial results will not be saved and you have to start over.

  12. when the test is finished, or if you have stopped it because it was taking too long, leaving the Terminal. The results have been saved to the Clipboard automatically. They do not appear in the Terminal window. Please do not copy from there. All you have to do is start a response to this comment and then paste it again by pressing Command-V.

  At the top of the results, there will be a line that begins with the words «Start time.» If you do not see, but rather to see a mass of gibberish, you don't expect the "Completed" message is displayed in the Terminal window. Please wait and try again.

  If personal information, such as your name or e-mail address, appear in the results, make anonymous before posting. Usually it will be not necessary.

  13. in the validation of the results, you see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the software which manages this website. Thanks for posting the results of the tests on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  14. This is a public forum and others can give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but what're told you to do maybe not. For others who choose to run it, I do not recommend that you view the results of test on this Web site unless I ask.

  ______________________________________________________________

  Copyright © 2014, 2015 by Linc Davis. As the sole author of this work (including the "Test of diagnosis" referenced), I reserve all rights except as provided in the terms of use agreement for the site of Apple support communities ("CSA"). ASC readers can copy for their personal use. The whole nor any part can be redistributed.

• Extension mobility / CAD issue: "You cannot connect because the phone is compatible IPV6"... help please.

  Hi all

  I'm having a problem with the mobility of the extension and CAD.

  UCCX 8.0.2.10000 - 41

  8.0.2.40000 - 1 CUCM

  CAD 8.0 (2)

  Phone: 7945G (configured according to other phones no 'contact center' of society, but not 'line' unaffected - want them purely for Contact Center users to connect to their posts)

  When the user logs in the phone itself, there is no question at this point.

  When the user goes to sign in CAD, they are presented with the following error:

  "You cannot connect because the phone is IPV6. IPv6 compatible phones are not compatible with CAD. »

  Workaround is to unlock (settings > * #) Network Configuration on the config of IPV6 phone and physical removal.

  Settings > * # > 2 (Network Configuration) > 2 (Configuration IPv6) > button 'more' > 'Clear' button > it presents 'clear IPv6 network settings '.

  The user can then successfully connect to the CSA.

  The problem is that, after his shift, the user logs on to the phone, then when they log in again, the question is again presented and the 'workaround' to manually remove the IPv6 configuration out of the phone must be done all over again (and each time after that too). Arrrrg.

  I also noticed that in CUCM > devices > Device Settings > Commond Device Configuration > find > my CDC > the IP address Mode IS set to "IPV4 and IPV6.

  A test, I've changed that to "IPV4" only

  User logged off phone, phone rebooted, logged in user, has attempted to connect to CAD, same problem. No change! Ahh some more!

  Finally, I discovered an alternative (to avoid the issue and the previous workaround)... CUCM, I put devices > phone > find > select > sub-heading ("phone Configuration') 'Extension Information' >"Logout profile"profile of mobility of users and then we do NOT have the issue. Phone restarted, connected, do not connect you, tried all the different States - everything works fine now.

  I also found that by setting up a 'line' on the device - the problem is also solved.

  HOWEVER, I don't really want to specify a line configured to the individual if possible phones or mobility of the specific user profile.

  Is it possible to avoid this? What Miss me to avoid specifying a line or a profile on your phone?

  See you soon,.

  Brett

  Post edited by: Brett Hanson (in the message original, I've specified only the version 8.0.2 as version - to make this discussion more relevant, I just put in the details of the full versions we ran when the issue was present.) CAD, except that I don't remember what version it was then).

  Hi Brett,

  I saw something similar once I installed UCCX 8.x to a customer.

  Workaround there had to be a SU installed on the UCCX.

  If it helps,

  Kind regards

  Juan

• Updated VM of ACS 5.4 a space issue warnings

  Updated to 5.4 last night and ran into several caveats regarding the storage space.  Here are the specific message:

  Warning: [acsDiskSizeCheckUtil.sh] Patch of 1079 M size exceeds the quota allowed 1000 M. it will not prohibit hotfix installation process as long as there's enough disk space. Please note that this indicates that you should consider moving ACS to a superior machine of disk space

  I note also that records 5.5 upgrade to do you have 500GB or more available for the upgrade.

  The virtual machine was thin supplied with 512 GB drive and shows only 84 GB actually used, so a few questions.

  1. Is the underlying operating system used by ACS smart enough for me to simply increase the underlying capacity of the virtual disk and do recognizes this new capacity?
  2. Are there of the CLI commands in ACS that will allow me to see/manage the underlying disk capacity?
  3. The documentation says to increase the ability to be either "redefining" the virtual machine or install a completely new instance and restore the backup of the original.  What exactly does Cisco means "re-Imaging"?  They refer to storage vMotion, where can I change the disk during a migration?

  Thank you for all time.

  My comments:

   Is the underlying OS used by ACS smart enough for me to simply expand the capacity of the underlying virtual disk and have it recognize this new larger capacity

  -Unfortunately, the answer is 'No' I tried to increase the capacity of a disc in ISE and ACS with root privileges and both times have been a complete failure. Now maybe it was because of my low Linux skills but... in any case, the answer is really 'no' If you want that more disk space you must re-create the VM of the CSA and then restore/re-build your config

   Are there any CLI commands in ACS that will let me view/manage the underlying disk capacity?

  -Have you tried to display the records

   The documentation says to increase the capacity be either "re-imaging" the vm or installing a totally new instance and restoring the backup from the original. What exactly does Cisco mean by "re-imaging" ? Are they referring to storage vMotion where I can change the disk during a migration?

  -Related to the #1 issue. Basically, you blow the current VM and build a new one. Then you restore your configs.

  Thank you for evaluating useful messages!

• Issue of operability of the ACS as RADIUS with ASA 5.0?

  Hello

  I'm trying my VPN to get authenticated user with RADIUS (ACS 5.0). and VPN users database is created in AD. Now when I am trying to connect through the Cisco VPN client, I am unable to do so. Infact, I get an error message (through debugging at the level of the SAA for aaa and isakmp) my RADIUS server is DOWN.

  Please let me know is there any compatibility issue with ACS 5.0 on it because everything was working fine on my version 4.2 of the ACS.

  Concerning

  Ritesh

  Ritesh,

  Yes, there is a lack of ACS 5.0 with vpn authentication.

  When you try to connect with the VPN client. you will not see any hits in the follow-up and the views.
  The ASDM logs: you'll see radius server is not accessible.
  Debugs you show RADIUS period.
  This will work with Ganymede.

  Access policy rule was does not. Also, could not use RADIUS as hit CSCsy17858

  http://cdetsweb-PRD.Cisco.com/apps/goto?identifier=CSCsy17858>; Used Ganymede + instead of RADIUS.

  If you want to use the RADIUS then you need to upgrade your version of acs to 5.1

  You can down load patch 9 (5-0-0-21 - 9.tar.gpg) and ADE-OS (ACS_5.0.0.21_ADE_OS_1.2_upgrade.tar.gpg) from the below path:

  Go to Cisco.com > support > download software > Security > Cisco Secure Access Control System 5.0 > Secure Access Control System Software 5.0.0.21 >

  Reference: update of the CSA since version 5.0 to 5.1:
  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_system/5.1/installation/guide/csacs_upg.html

  HTH

  Kind regards

  JK

  The rate of useful messages-

• Appeal iPhone issues 7 more

  I recently bought the new iPhone 7 more.  Not only am I having problems with the LTE service, bounce back between 3 G and no service I am now having problems with call connectivity.  When you try to make an outgoing call, I get an automatic response from my carrier (Verizon) "it's Verizon, we are unable to complete your call at this time, please turn off your phone and back and try again."

  It is a known issue with the iPhone 7 and Verizon. Supposed to be Apple and Verizon are seeking him. It has been a problem since the phone was released. Do a Google search or search here on the forums for a temporary solution but not a cure.  But basically to stop the LTE oice and data into data only in the settings.

• iPhone 6 more hang freeze issues

  My iPhone 6 more guard suspended (gel) for the past 6 months, I have to reset the whole phone sometimes up to 2 times just to get it to work again. Been a loyal (including my entire family) custome since gen 1 iPhone, iPad, mac book. Am really disappointed with the quality now. Did not bring to the service center since the first day of the problem because I thought that was just a few bugs & was sure that apple will fix it, but after many update of iOS so far, the pesisit still problem.

  iPhone is more quality I've known, hope apple can fix this problem before finally losing the most loyal customers

  Hello BennyFoo,

  Thank you for bringing your iPhone freeze questions here for Apple Support communities. I understand how it is important to have a reliable phone. I'm happy to check this with you.

  The first thing we want to make sure that all of your data on your device is safe. You can perform a backup in iCloud or iTunes using this article: backing up your iPhone, iPad, and iPod touch.

  Once your data is safe, try to turn off your device, then again on the March. Sometimes, that's all that is needed for connections reset and everything working properly again. This article help from Apple will help you to do: restart your iPad, iPhone or iPod touch. If you are still having issues, try force reset then. It is designed to be used when the iPhone does not respond, and it looks to be the exact symptoms that you are experiencing right now.

  If you still experience the same problems after reboot, please try to restore your device from a backup by using this article help: restore your iPhone, iPad or iPod touch from a backup. If you don't have a current backup, please try this help article: If you can not update or restore your iPhone, iPad, or iPod touch. Please pay close attention when you get to step 4 who said "when you see the option restore or put to update, choose update. iTunes will try to reinstall iOS without erasing your data. "to get your iOS reinstalled. Test if the issue is still ongoing.

  Thanks again and have a great rest of your day.

• Pages on issues of formatting to iCloud

  Hey everybody,

  I created a document Pages using the Pages application on my macbook pro I downloaded then to iCloud Pages so that I can access it from any computer. The issue I'm having is that I formatted some of the text to have a black background and the text to yellow color. For the life of me I can't understand how to change the background color of text on the Pages of iCloud. I beginning to think that changing the background color of text just is not possible on the platform of iCloud, but wanted to put this out there just to make sure.

  I appreciate any help or clarification on this issue.

  Thank you!

  Background (highlight) text color controls are absent in the Pages for iCloud, because it is a subset of Pages for Mac.

  This has been discussed in a previous post here, not so long ago.

• External hard drive mounting issues on MacOS Sierra

  After upgrading to OS Sierra, I found that my USB3 drives, directly connected to my iMac end of 2012, turn off at startup. USB 2 disks are unaffected and connect properly. The only way to access my USB3 disks is to disconnect and reconnect every time I start the computer, then they are ok. I tried to reset the NVRAM, but it did not work. I found Os El Capitan until this issue is resolved.

  Do not mount or actually turns out always the system start? It was not clear in your subject line and content later, what was going on.

  Are they NTFS formatted drives? See the solutions frequently asked and answered forum if they are.

• TVos 10 - Apple TV 4 (Wifi issues)

  My apple TV was working until it was upgraded to the new update 10 TVos great. I reset my router and modem, reset the apple tv itself and it has restarted several times, all with the same mistake of not being able to connect to the wifi network. My iPhone and computer are connected properly, get about 40mbps is normal, and the router is in the same room. Everyone knows these issues? No luck, anyone know a fix?

  have you tried to restore the appletv? Restore your Apple TV via iTunes - Apple Support

• I can't reach some websites with any browser. I get the message ERR_CONNECTION_REFUSED. If I boot in safe mode I don't have the issue. I tried the reset and repair of everything. Help, please

  I can't reach some websites with any browser. I get the message ERR_CONNECTION_REFUSED. If I boot in safe mode I don't have the issue. I tried the reset and repair of everything. Help, please

  Try to run this program in your usual account, then copy and paste the result in a response. The program was created by Etresoft, a regular contributor.  Use please copy and paste the screenshots can be difficult to read. On the screen with the Options, please open Options and tick the boxes in the bottom 2 before the race. Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste into a response. This will show what is running on your computer. No personal information is shown.

  Etrecheck - Information System