CSA - log file copy

Hi all!

I have a question.

We want to protect business data and I put the CSA - MC connect when someone try to copy the private data on a removable device, USB key...

and the CSA send me a mail regarding this event.

But this isn't a sufficient protection. If the user changes the name file (.mp3) I don't know what is the file, in fact it's really a 'mp3' or private data.

What can you suggest me?

Can I save the file somewhere to check later?

or create a better rule, to catch if anyone tries to steal data.

(I don't want to refuse the recording, connect the flight)

I hope you understand what I want.

Thank you, br, Gabor

Hey Gabor,

You can use these data classes, and I recommend it as a good starting point. The idea is that you must set the data (i.e. from your sensitive application) and preset policies will monitor and control the data. In addition, you will be able to report on the data labels and see how data are used in your environment.

Hope that helps!

Josh

Tags: Cisco Security

Similar Questions

Is there a log file for the copy of the errors

Often, when I copy a lot of files, there are a few errors... which usually appears at the end of the copy function. These errors appear in a dialog box that is too small to read the path/file names. And I need not only to take a decision to continue with the copy or to jump. There is also a checkbox that drives me to do the same with the other similar problem files x.

My problem is that I would like to know the names of file/full path of all files by mistake. Is there some log file I can inspect to review the list of files by mistake? I looked in the case log, but could not see that anything that is related to file copy errors.

Hello

No, there are no newspaper or file to list the error files.

Mail creation of massive log files and stop the synchronization with the server

Since the upgrade to El Capitan (10.11.1), Mail presents two problems persist:

(1) it generates massive log files, e.g. 2015-12 - 03_IMAPSyncActivity.log these files regularly exceed 10 GB and block Mail and freeze the Mac. Mail can be over 8 GB of RAM. Once removed, Mail recreates the file and fills again, ends up doing more massive files that must also delete.

(2) mail stop sync with my different IMAP e-mail servers. The only solution I've found that it completely delete the or the e-mail accounts and reinstalls the account. It works for a day (or even a few hours) before it just stops the synchronization, even if a connection test shows he connects with the server. This problem seems to occur on two e-mail accounts separately on two different servers / hosting companies, but not on my Gmail accounts.

These two problems occur on both my iMac (21.5 ", mid-2011, 2.5 GHz Intel Core i5, 8 GB RAM) and MacBookPro (13', mid-2011, 2.5 GHz Intel core i5, 4 GB RAM).

Full of ideas gratefully received!

Thank you!

Please take these steps to remove the mail folders 'sandbox '.

Step 1

Back up all data.

Triple-click anywhere in the line below on this page to select this option:
```
~/Library/Containers/com.apple.mail
```
Right-click or Ctrl-click on the highlighted line and select

Services ▹ Reveal

the contextual menu.* A Finder window should open up with a folder named "com.apple.mail" selected. If this is the case, move the selected folder - not only its content - on the desktop. Open the window Finder for now.

Restart the computer. Launch Mail and test. If the problem is resolved, you may have to re-create some of your e-mail settings. Any writing paper custom that you created may be lost. Ask for instructions if you want to keep these data. You can then delete the folder that you moved and close Finder.

CAUTION: If you change the content of the sandbox, but leave the folder itself in place, Mail may hang or starts any. Remove the tray to sand everything will be rebuilt automatically.

Step 2

If step 1 does not resolve the problem, repeat with this line:
```
~/Library/Containers/com.apple.MailServiceAgent
```
* If you do not see the item context menu copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select

Go ▹ go to the folder...

from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

Is it possible to edit the ultiboard log file (v10.1.1)?

I made the mistake of removing parts of a design Ultiboard and will then mark them up a very different conception of Multisim. Now when I try to renumber all reference indicators and annotate back to Multisim, he wants to remove all items first and then make him renumber. It is with the version 10.1.1. Is it possible to edit the log file if it doesn't do the renumbering of part?

Since this drawing took me 3 days to deliver, she really sucks if I start more can renumber parts.

I thought that the answer would be no because I think they address this version 11. But I found a way to 'cleansing' of the log file. I created another design, just copied and pasted in the new design. At that time, I had the same exact design, with the same reference indicators and all traces of tact, but none of the nets. I've annotated front of Multisim and introduced all the nets without error. Now I have renumbered all parts and retro-annotation. He wanted to stick all over again but this time that Multisim just said "not supported - add part xxxx" which meant that there nothing done. But she made the reference of all changes of the indicator. Yay. Even if she was in trouble with multi-sectioned parts. He would get a right door, but the rest would be something different with "xx" in the reference indicator. As "Uxx6A". So all I had to do by clicking on the parties and select 'replace the component' and it will show the indicator just with a single gate used and I just had to select the same door.

So problem solved.

I have can´t of the cbs.log file

Hello world

It seems that never ends, now it s the file cbs.log that says access denied.

OK, after you have installed successfully (and finally) sp1 of vista, I ran once more the chkdsk and sfc/verifyonly to verify if everything was ok, as if it was before I ve installed sp1, which was: no no violation of the integrity of the errors found, files damaged, everything seemed just fine for me, but now After installing sp1, the sfc/verifyonly said that Windows found violations of integrity resources Protection and the details are in the cbs.log file, which I was able to access so far, but now, when I try to open it, it says "access denied" - what happened between that made the system go like that and can it be resolved?

Anyway, desperate, I tried a sfc/scanow in the hope that it would solve this problem, this 'thing', well actually he pointed out that the Protection of Windows resources found and managed to repair damaged files and details could be found at c:\windows\logs\cbs\cbs.log, but as I said before when I try to open this file it says access denied.

So I rebooted my pc and hope that everything would be ok, given that the sfc/scannow said that the files when repaired, so I thought. Unfortunately, that s not the way it is, after the reboot, I ran sfc/verifyonly, just to confirm that everything was actually ok, well it still signals once Windows Resource Protection found violations of integrity and the details can be found in the cbs.log file.

Right now my computer seems to work very well, besides that of course, the problem is I m feling completely lost here with this 'thing', it just doesn't feel good and probably it's just me, maybe I m too picky about this stuff, everything must be running ok so I can be at rest with myself, please can someone help me with this , can someone explain me what is happenning, so I can understand it?

I think that worst of all, at least for me, is not to know what is happening, it s as I have, I would even say obcessive, need to understand not only the solution but most of all the cause of it, the mechanism of it s, I need to understand the process, don't´t you all?

Pleeaase helps.

Well be Pedro Borba

Pedro Borba,
You must copy the CBS and paste it on your desktop or Documents folder. Then, open the copied version of the file. Here is an article which also gives instructions on reading and research the CBS log file.

Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think.

Access denied to the CBS.log file

Hello

I found the cbs.log file but when I tried to open it I get access denied. Found a similar question in another post, but was unable to find a solution. Running Vista Home Premium SP2 64 bit on a HP Pavillion dv9700 Windows 7 or IE8. Also tried to copy the documents as suggested in another post and ran as administrator on the command line without a bit of luck. Other simple suggestions are appreciated.

Hello talefeather,

Thank you for visiting the Microsoft answers community.

Try this:

·          Click on Start Orb > type cmd in the search box

·          Right click on cmd in the results above > click on run as administrator

·          At the prompt, type notepad c:\windows\logs\cbs\cbs.log press entry

Then follow the step in which Mick provided.

Hope this helps

Chris.H
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.

Can someone help me interpret the results of a log cbs.log file?

My laptop worked little strange - gel sometimes and only excessively slow. I ran chkdsk /f checks and / r. Both went well. I then ran sfc/scannow. The results of this analysis are displayed below. I'm not a pc expert, so I don't know if I'm all together or if there is something else, I have to do. Specifically, the last line of the cbs.log file says, "Verify and Repair Transaction completed. All of the files and registry keys listed in the framework of this operation were properly repaired".

Any help would be appreciated! Sorry for the text copy/pasted for a long time. I cut about 99% of the out and about 1% of the folder (due to a limit of 60 000 characters) just left. I couldn't find a way to attach a file.

Thank you!

POQ 64 ends.

2012-10-09 22:06:25, Info CSI 00000171 [SR] check complete

2012-10-09 22:06:26, info CSI 00000172 [SR] components check 100 (0 x 0000000000000064)

2012-10-09 22:06:26, transaction Info CSI 00000173 [SR] beginning verify and repair

2012-10-09 22:06:37, info CSI 00000174 Member \SystemRoot\WinSxS\amd64_microsoft-windows-sidebar_31bf3856ad364e35_6.0.6002.18005_none_2ce6c04cdc275758\settings.ini file hashes are not actual file [l:24 {12}] "settings.ini": "

Found: {l:32 b:sKFy6962 + 2YBWdYMZ6Z/UOVMGpEOdEczYmmYd2o9CE4 =} expected: {l:32 = b:v6OQf2AJO5FVbRBJuIwXxkdkCoOaSk3y0ol6uTH491o}

2012-10-09 22:06:37, info CSI 00000175 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), the Culture neutral, VersionScope is 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

2012-10-09 22:06:40, info CSI 00000176 Member \SystemRoot\WinSxS\amd64_microsoft-windows-sidebar_31bf3856ad364e35_6.0.6002.18005_none_2ce6c04cdc275758\settings.ini file hashes are not actual file [l:24 {12}] "settings.ini": "

Found: {l:32 b:sKFy6962 + 2YBWdYMZ6Z/UOVMGpEOdEczYmmYd2o9CE4 =} expected: {l:32 = b:v6OQf2AJO5FVbRBJuIwXxkdkCoOaSk3y0ol6uTH491o}

2012-10-09 22:06:40, info CSI 00000177 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), the Culture neutral, VersionScope is 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

2012-10-09 22:06:40, info CSI 00000178 [SR] this element is referenced by [l:162 {81}] "' Package_17_for_KB948465 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.0.1.18005.948465 - 60_neutral_GDR" "

2012-10-09 22:06:41, Info CSI 00000179 repair results created:

POQ 65 begins:

2012-10-09 22:17:24, info CSI 00000301 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), the Culture neutral, VersionScope is 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

2012-10-09 22:17:24, info CSI 00000302 Member \SystemRoot\WinSxS\amd64_microsoft-windows-sidebar_31bf3856ad364e35_6.0.6002.18005_none_2ce6c04cdc275758\settings.ini file hashes are not actual file [l:24 {12}] "settings.ini": "

Found: {l:32 b:sKFy6962 + 2YBWdYMZ6Z/UOVMGpEOdEczYmmYd2o9CE4 =} expected: {l:32 = b:v6OQf2AJO5FVbRBJuIwXxkdkCoOaSk3y0ol6uTH491o}

2012-10-09 22:17:24, info CSI 00000303 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), the Culture neutral, VersionScope is 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

2012-10-09 22:17:24, Info CSI 00000304 [SR] this element is referenced by [l:162 {81}] "' Package_17_for_KB948465 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.0.1.18005.948465 - 60_neutral_GDR" "

2012-10-09 22:17:24, info CSI 00000305 hashes for Member file? \C:\Windows\PolicyDefinitions\inetres.ADMX are not real file [l:24 {12}] "inetres.admx": "

Found: {l:32 b:DjclSPQ + c3ju7E53XXW47eR94SH7ICruHSUKg8YAkO0 =} expected: {l:32 b:3 T / Xc + 0 k/wBxJ4k/vlPd86jLOYtWOjRsHrz0hHH9H8s =}

2012-10-09 22:13:42, CSI 0000027e Info [SR] repair corrupted file [ml:520 {260}, l:64 {32}] '------? \C:\windows\policydefinitions"\[l:24{12}]"Inetres.ADMX' of the store

2012-10-09 22:13:42, CSI Info 0000027f WARNING: file [l:24 {12}] "inetres.admx" in [l:64 {32}] '-? ' "" \C:\windows\policydefinitions' switching property

Old: Microsoft-Windows-InetRes-Adm, Version = 9.1.8112.16421, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral

New: Microsoft-Windows-InetRes-Adm, Version = 8.0.6001.18702, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral

2012-10-09 22:13:44, info CSI 00000280 hashes for Member file? \C:\Windows\PolicyDefinitions\en-US\InetRes.adml are not real file [l:24 {12}] "InetRes.adml": "

Found: {l:32 b:8uqfOni5TmKQ2 + wymJKX9uLDOmUV2H1RKpYV3gacaRw =} expected: {l:32 = b:f2Ca02GHu2Yr3ccXiLvfpdfLkfeeDX2UExmZb6pQm2U}

2012-10-09 22:13:44, info CSI 00000281 [SR] repair file corrupted [ml:520 {260}, l:76 {38}] '------? \C:\Windows\PolicyDefinitions\en-us"\[l:24{12}]"InetRes.adml' of the store

2012-10-09 22:13:44, info CSI 00000282 WARNING: file [l:24 {12}] "InetRes.adml" in [l:76 {38}] '-? ' "" \C:\Windows\PolicyDefinitions\en-us' switching property

Old: Microsoft-Windows-InetRes - Adm.Resources, Version = 9.1.8112.16421, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture = [l:10 {5}] 'en-US', VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral

New: Microsoft-Windows-InetRes - Adm.Resources, Version = 8.0.6001.18702, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture = [l:10 {5}] 'en-US', VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral

2012-10-09 22:17:25, 00000306 CSI info [SR] repair corrupted file [ml:520 {260}, l:64 {32}] '------? \C:\windows\policydefinitions"\[l:24{12}]"Inetres.ADMX' of the store

2012-10-09 22:17:25, info CSI 00000307 WARNING: file [l:24 {12}] "inetres.admx" in [l:64 {32}] '-? ' "" \C:\windows\policydefinitions' switching property

Old: Microsoft-Windows-InetRes-Adm, Version = 9.1.8112.16421, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral

New: Microsoft-Windows-InetRes-Adm, Version = 8.0.6001.18702, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral

2012-10-09 22:17:25, info CSI 00000308 hashes for Member file? \C:\Windows\PolicyDefinitions\en-US\InetRes.adml are not real file [l:24 {12}] "InetRes.adml": "

Found: {l:32 b:8uqfOni5TmKQ2 + wymJKX9uLDOmUV2H1RKpYV3gacaRw =} expected: {l:32 = b:f2Ca02GHu2Yr3ccXiLvfpdfLkfeeDX2UExmZb6pQm2U}

2012-10-09 22:17:25, 00000309 CSI info [SR] repair corrupted file [ml:520 {260}, l:76 {38}] '------? \C:\Windows\PolicyDefinitions\en-us"\[l:24{12}]"InetRes.adml' of the store

2012-10-09 22:17:25, CSI Info 0000030a WARNING: file [l:24 {12}] "InetRes.adml" in [l:76 {38}] '-? ' "" \C:\Windows\PolicyDefinitions\en-us' switching property

Old: Microsoft-Windows-InetRes - Adm.Resources, Version = 9.1.8112.16421, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture = [l:10 {5}] 'en-US', VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral

New: Microsoft-Windows-InetRes - Adm.Resources, Version = 8.0.6001.18702, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture = [l:10 {5}] 'en-US', VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral

2012-10-09 22:17:25, created results CSI 0000030b repair Info:

POQ 127 ends.
2012-10-09 22:17:25, all repairs [SR] CSI Info 0000030 c
2012-10-09 22:17:25, CSI Info 0000030 d [SR] validation of transaction
2012-10-09 22:17:25, transaction CSI Info 0000030e Creating NT (seq 1), objectname [6] "(null) '"
2012-10-09 22:17:25, CSI Info 0000030f NT created transaction (seq 1) result 0x00000000, manage @0x14c4
2012-10-09 22:17:25, Info CSI 00000310@2012/10/10:02:17:25.662 CSI perf trace:
CSIPERF:TXCOMMIT; 143298
2012-10-09 22:17:25, Info CSI 00000311 [SR] check and complete repair operation. All of the files and registry keys listed in this operation were repaired successfully

Hello

As noted at the end of your message SFC/scannow points out that there is no rest
questions that he can fix.

More information on how to easily read the important information as SFC/scannow
adds to the cbs.log.

Many files that SFC cannot resolve are not important.

Start - type in the search box-> find CMD in top - click right on - RUN AS ADMIN

put the command from below (copy and paste) in this box and her and then press ENTER.

findstr/c: "[SR]" %windir%\logs\cbs\cbs.log > sfcdetails.txt

who creates the sfcdetails.txt file in the folder that you are in when you run it.

So if you're in C:\Windows\System32 > then you will need to look in that folder for the file.

How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
in Windows Vista
http://support.Microsoft.com/kb/928228

This creates sfcdetails.txt in C:\Windows\System32 find and you can post the errors in a message
here. NOTE: there are probably duplicates so please only post once each section error.

You can read the newspaper/txt files easier if you right click on Notepad or Wordpad then RUN AS ADMIN - then
You can navigate to sfcdetails.txt (in C:\Windows\System32) or cbs.log (in C:\Windows\Logs) as needed.
(You may need to search sfcdetails.txt if it is not created in the default folders.)

=======================================================

Troubleshooting:

Use the startup clean and other methods to try to determine the cause of and eliminate
the questions.

---------------------------------------------------------------

What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).

----------------------------------------------------

Follow these steps:

Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

Enter this at the command prompt - sfc/scannow

How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228

Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

==========================================

After the foregoing:

How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685

Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).

How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

A quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------

Tools that should help you:

Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

Autoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

There are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.html

There are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.html

Window Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.asp

Many excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/

===========================================

Vista and Windows 7 updated drivers love then here's how update the most important.

This is my generic how updates of appropriate driver:

This utility, it is easy see which versions are loaded:

-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.html

For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.

Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.

Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.

Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.

Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.

Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

How to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.

How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

===========================================

Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.

Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-us

Performance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

I hope this helps.

Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

OfficeJet 6700 Installation - error opening Installation log file

Try to install the software for OfficeJet 6700. All - tried delete reg keys, copy sw HD, download new drivers and run as administrator. Have Win7 64 bit Professional OS. Windows doesn't have the driver get same error every time. "Error opening installation log file. Verify that the specified log file location exists and that you can write to it. "Am about to return this article to Costco. It can't be this hard! What is the answer?

Hey everyone - I finally understand how to solve this problem! As they say, it's always the last place you are looking for! All joking aside, this is how I did it.

The problem is that HP setup.exe does not seem to be compatible with Windows 7 Professional 64-bit. So, in short, the solution is to run the installer in compatibility mode Windows XP SP2.

1. open computer and navigate to the Setup CD.

2. do not Autorun or auto play installation.

3. click right one open the CD from the computer.

4 scroll down on the list of files on the CD until you see Setup with the HP logo next to it.

5 right-click the program installation and in the context menu, select 'Troubleshoot compatibllty '.

6. the resolution of the problems should open. Select "try recommended settings.

7. then, the troubleshooter should say it's solve problems and give you a button "Start the Program". Click this button and the installation program should start normally.

8. from here before the installation should work normally. Although normal is sometimes nothing more than a laundry dryer set!

My system is Windows 7 Professional 64 bit. This kind of issue that happened to me in the past with other software installations, but I've never waited or he waits with a new HP printer!

Thanks to the HP support people I talked about this during the last few days. It is certainly something that should be documented. I hope that this article here will help others. Let me know if it helps you!

Send the log file only works on Simulator

Hello together,

I added the ability for our users to send a log file of the application for me (author). Its a business application. We have now deployed version and now the log file is NOT attached to the email.

The code I am using:

void ApplicationUI::sendLogfile()
{
    InvokeRequest request;
    request.setAction("bb.action.COMPOSE");
    request.setMimeType("message/rfc822");
    QVariantMap data;
    data["to"] = (QVariantList() << "[email protected]" << "[email protected]");
    data["subject"] = "ceAuToApp Logdatei";
    QString fileName = QString("log.txt.%1").arg(QDate::currentDate().toString("yyyy-MM-dd"));
    QString filePath = QString("logs/%1").arg(fileName);
    QString logpath = QString("shared/misc/%1").arg(fileName);
    QFile::remove(logpath);
    QFile::copy(filePath,logpath);
    QString logpathEncoded = QString(QUrl(logpath).toEncoded());
    data["attachment"] = (QVariantList() << logpathEncoded);
    QVariantMap moreData;
    moreData["data"] = data;
    bool ok;
    request.setData(bb::PpsObject::encode(moreData, &ok));
    InvokeManager manager;
    manager.invoke(request);
}

QML:

Button {
            text: qsTr("Logdatei an Entwickler senden")
            onClicked: {
                _ApplicationUI.sendLogfile()
            }
            horizontalAlignment: HorizontalAlignment.Center
        }

Any ideas why it works on Simulator as well as on the device (running in developer mode) but not within the company? Thanks for your help.

Sven

He got together with the following code:

void ApplicationUI::sendLogfile()
{
    InvokeRequest request;
    request.setAction("bb.action.COMPOSE");
    request.setMimeType("message/rfc822");
    QVariantMap data;
    data["to"] = (QVariantList() << "[email protected]" << "[email protected]");
    data["subject"] = "ceAuToApp Logdatei";
    QString fileName = QString("log.txt.%1").arg(QDate::currentDate().toString("yyyy-MM-dd"));
    QString filePath = QDir::currentPath() + QDir::separator() + QString("logs/%1").arg(fileName);
    QString logpath = QDir::currentPath() + QDir::separator() + QString("shared/misc/%1").arg(fileName);
    QFile::remove(logpath);
    QFile::copy(filePath,logpath);
    QString logpathEncoded = QString(QUrl(logpath).toEncoded());
    data["attachment"] = (QVariantList() << logpathEncoded);
    QVariantMap moreData;
    moreData["data"] = data;
    bool ok;
    request.setData(bb::PpsObject::encode(moreData, &ok));
    InvokeManager manager;
    manager.invoke(request);
}

File copy operation

I was wondering how do you file copy operation?

I have a file in my assets, it s a folder image file, and I want to just copy it into the shared folder, but I can´t to achieve this.

QFile::copy ("assets:///images/image.jpg", "file:///accounts/1000/shared/camera/image.jpg");

Should I first?

Kind of stuck here

Thank you!

The prefix of the correct URL is active: / / /, not assets:.

But QFile is not a class of Cascades and perhaps do not understand this prefix at all.

Try:
QString from = QDir::currentPath() + "/ app/native/assets/images/image.jpg";
QString = QDir::homePath() + '... / shared/camera/image.jpg ';
QFile::copy (from, to);

Also access_shared permission must be paid bar - descriptor.xml

UPD:

Try logging & values and verify that files with these names actually exist on the device. If the roads are bad, adjust them accordingly. Device Filesystem Navigator in Momentics can be used for this.

The network drive log file

Hello

I have a small business server, which is run through a network with thousands of files on as drawings etc.

I have an employee who I suspect may copy files to our server for small businesses and keeping them to use in/when he left the company, then potentially to poach customers.

I was wondering if there was anyway to get a log file which files are copied to the server just so I can make sure that this happens?

Thank you very much.

Server gurus all spend time in the TechNet forums, could ask them better.

http://social.technet.Microsoft.com/forums/en/category/WindowsServer

How to find the source of the MSIfe * .log files - windows 7

In the windows/temp directory, I have more than 100 GB of logs with the syntax of MSIfe *. Each file is about 7 257 KB in size.

Any suggestions on how I can determine the source of these files?

Thank you

Brad

+++++++++++++++++++++++

HERE ARE THE FIRST LINES OF ONE OF THE FILES:

= Registration began: 19/06/2012-13:57:59 Build type: SHIP UNICODE 5.00.7601.00 appeal process: C:\Windows\Microsoft.NET\Framework\v4.0.30319\mscorsvw.exe =.
MSI (c) (14:84) [13:57:59:458]: Resetting cached policy values
MSI (c) (14:84) [13:57:59:458]: value of strategy Machine 'Debug' is 0
MSI (c) (14:84) [13:57:59:458]: * RunEngine:
Product: {3D8DBCCD-FE59-3648-A084-6D2F78351F9E}
Action:
Command line:
MSI (c) (14:84) [13:57:59:459]: Client and UI is none or basic: full installation running on the server.
MSI (c) (14:84) [13:57:59:459]: grabbed execution mutex.
MSI (c) (14:84) [13:57:59:461]: Cloaking enabled.
MSI (c) (14:84) [13:57:59:461]: attempt of activation of all disabled privileges before calling install on server
MSI (c) (14:84) [13:57:59:463]: meter is incremented to disable the stop. Counter after increment: 0
MSI (s) (48:18) [13:57:59:466]: running the installation inside the multi-package transaction {3D8DBCCD-FE59-3648-A084-6D2F78351F9E}
MSI (s) (48:18) [13:57:59:466]: grabbed execution mutex.
MSI (s) (48:B8) [13:57:59:467]: Resetting cached policy values
MSI (s) (48:B8) [13:57:59:467]: value of strategy Machine 'Debug' is 0
MSI (s) (48:B8) [13:57:59:467]: * RunEngine:
Product: {3D8DBCCD-FE59-3648-A084-6D2F78351F9E}
Action:
Command line:
MSI (s) (48:B8) [13:57:59:467]: value of strategy Machine 'DisableUserInstalls' is 0
MSI (s) (48:B8) [13:57:59:483]: SRSetRestorePoint is ignored for this transaction.
MSI (s) (48:B8) [13:57:59:486]: dialogue of end not activated
MSI (s) (48:B8) [13:57:59:486]: ==> C:\Windows\Installer\495c6.msi original packaging
MSI (s) (48:B8) [13:57:59:486]: we're running out of ==> C:\Windows\Installer\495c6.msi package
MSI (s) (48:B8) [13:57:59:501]: APPCOMPAT: substitution of uninstall flags found.
MSI (s) (48:B8) [13:57:59:501]: APPCOMPAT: uninstall VersionNT found override.
MSI (s) (48:B8) [13:57:59:501]: APPCOMPAT: substitution of uninstall ServicePackLevel found.
MSI (s) (48:B8) [13:57:59:502]: APPCOMPAT: looking for entry with ProductCode '{3D8DBCCD-FE59-3648-A084-6D2F78351F9E}' appcompat database
MSI (s) (48:B8) [13:57:59:502]: APPCOMPAT: no matching ProductCode found in the database.
MSI (s) (48:B8) [13:57:59:505]: MSCOREE not loaded loading copy from system32
MSI (s) (48:B8) [13:57:59:508]: value of strategy Machine 'DisablePatch' is 0
MSI (s) (48:B8) [13:57:59:508]: value of strategy Machine 'AllowLockdownPatch' is 0
MSI (s) (48:B8) [13:57:59:508]: value of strategy Machine 'DisableLUAPatching' is 0
MSI (s) (48:B8) [13:57:59:508]: value of strategy Machine 'DisableFlyWeightPatching' is 0
MSI (s) (48:B8) [13:57:59:508]: APPCOMPAT: looking for entry with ProductCode '{3D8DBCCD-FE59-3648-A084-6D2F78351F9E}' appcompat database
MSI (s) (48:B8) [13:57:59:509]: APPCOMPAT: no matching ProductCode found in the database.

Here are the comments Windows log files install.

Detailed logging must have been lit at some point.

There's a Fixit turn off in this article here:

http://support.Microsoft.com/kb/2545723

Ntuser.dat.LOG files are important to include in a backup to transfer files to a new computer?

Ntuser.dat.LOG files are important to include in a backup that is used to transfer files to a new computer? When you try to backup or copy files I get the message that these files (there are 4 of them) cannot be saved or copied because they have already opened and used on the computer. A single file is 256 KB and another has 0 KB. Can not see the other two

Hi MAnnetteFox,

Thanks for posting the query on Microsoft Community.

You do not need to take backup of these files and they are normal files that will be generated.

In the future, if you have problems with Windows, get back to us. We will be happy to help you.

R12.2.5 Installation on OL 7.1 ERROR: RW-50010: error:-script returned an error: 1 RW-50004: error code when you run the external process. Check the log file for more details

I tried to install EBS 12.2.5 on OL 7.1 with rapidwiz and got this error when applying the unique patches in second File System
"Second system logfile file - /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/logs/12021641.log.
LOG FILE:
_____________________________________________________________________________________________________________________________
Step 0-8
Command: /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/adrunfmw.sh
Step 4 of 8: UNIX making pretreatment
Running: chmod 777/db/oracle/OraInventory r
chmod-r 777/db/oracle/OraInventory succeeded
Step 4 of 8
Performance: known appltest - c "/ app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/adrunfmw.sh".
PHASE of INSTALLATION has BEGUN: APPS TECH STACK: Wed Dec 2 17:27:07 IST 2015
runProcess_1
StatusString installation of Applications Technology Stack
Copy the temp area models
Inventory name is: app_oracle_TEST_fs2_Oracle_EBS_app
One-time fixes copy to temp area
Remove JDK_TOP: / app/oracle/TEST/fs2/EBSapps/comn/util/jdk32 if there is
/ App/oracle/TEST/fs2/EBSapps/comn/util/jdk32 deleted directory
Installation of WebLogic Server.
With the help of /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instWLS.xml
L'exécution de commande : /stageR12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.6.0/bin/java -cp /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/ASInstallHome/fnd /... /j11067592_fnd.zip:/app/Oracle/test/FS2/inst/Apps/TEST_ebs122/Temp/ASInstallHome/FND/Java/3rdparty/stdalone/xmlparserv2.zip-Doracle.apps.fnd.txk.env_home=/app/oracle/TEST/fs2/EBSapps/appl/admin/TEST_ebs122/-Doracle.apps.fnd.txk.runtime.config=/app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instWLS.xml oracle.apps.fnd.txk.config.InstallService
WebLogic Server successfully installed
Web Tier utility installation.
With the help of /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instWeb.xml
L'exécution de commande : /stageR12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.6.0/bin/java -cp /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/ASInstallHome/fnd /... /j11067592_fnd.zip:/app/Oracle/test/FS2/inst/Apps/TEST_ebs122/Temp/ASInstallHome/FND/Java/3rdparty/stdalone/xmlparserv2.zip-Doracle.apps.fnd.txk.env_home=/app/oracle/TEST/fs2/EBSapps/appl/admin/TEST_ebs122/-Doracle.apps.fnd.txk.runtime.config=/app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instWeb.xml oracle.apps.fnd.txk.config.InstallService
Level successfully installed Web utilities
Registration EBSUsing /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instEBS.xml
L'exécution de commande : /stageR12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.6.0/bin/java -cp /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/ASInstallHome/fnd /... /j11067592_fnd.zip:/app/Oracle/test/FS2/inst/Apps/TEST_ebs122/Temp/ASInstallHome/FND/Java/3rdparty/stdalone/xmlparserv2.zip-Doracle.apps.fnd.txk.env_home=/app/oracle/TEST/fs2/EBSapps/appl/admin/TEST_ebs122/-Doracle.apps.fnd.txk.runtime.config=/app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instEBS.xml oracle.apps.fnd.txk.config.InstallService
EBS registered successfully
Rename/home/appltest/bea/beahomelist in /home/appltest/bea/beahomelist.29266 to avoid problems during WLS
patching
/ Home/appltest/Bea/beahomelist renamed successfully.
Application of ad hoc patches
With the help of /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instASpatches.xml
L'exécution de commande : /stageR12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.6.0/bin/java -cp /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/ASInstallHome/fnd /... /j11067592_fnd.zip:/app/Oracle/test/FS2/inst/Apps/TEST_ebs122/Temp/ASInstallHome/FND/Java/3rdparty/stdalone/xmlparserv2.zip-Doracle.apps.fnd.txk.env_home=/app/oracle/TEST/fs2/EBSapps/appl/admin/TEST_ebs122/-Doracle.apps.fnd.txk.runtime.config=/app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instASpatches.xml oracle.apps.fnd.txk.config.InstallService
Fatal error: T2K install Service
oracle.apps.fnd.txk.config.ProcessStateException: OPatch process failed: Output = 1 see log for more details. CMD = perl /app/oracle/TEST/fs2/FMW_Home/webtier/OPatch/opatch.pl apply - verbose - silent - ocmrf /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/ASInstallHome/fnd/admin/template/txkForms_ocm.rsp jdk - / app/oracle/TEST/fs2/FMW_Home/webtier/jdk/app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/patches/7695070/7695070
at oracle.apps.fnd.txk.config.OPatchActionNode.processState(OPatchActionNode.java:312)
at oracle.apps.fnd.txk.config.PatchActionNode.processState(PatchActionNode.java:187)
at oracle.apps.fnd.txk.config.PatchNode.processState(PatchNode.java:338)
at oracle.apps.fnd.txk.config.PatchesNode.processState(PatchesNode.java:79)
at oracle.apps.fnd.txk.config.InstallNode.processState(InstallNode.java:68)
at oracle.apps.fnd.txk.config.TXKTopology.traverse(TXKTopology.java:594)
at oracle.apps.fnd.txk.config.InstallService.doInvoke(InstallService.java:224)
at oracle.apps.fnd.txk.config.InstallService.invoke(InstallService.java:237)
at oracle.apps.fnd.txk.config.InstallService.main(InstallService.java:291)
Can not install the unique patches
RW-50010: error:-script returned an error: 1
RW-50004: Error Code when you run the external process. Check the log file for more details.

It was recorded in /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/logs/12021641.log and I don't know how to find another newspaper for such details as mentioned in this journal. Please help me with that.

Concerning
KasunA

Found a workaround. The problem is that, before the 7695070 patch is applied, the installation program backup directory/apps/fs2/FMW_Home/webtier/jdk in /apps/fs2/FMW_Home/webtier/jdk_backup_existing_version, but then it clears. / jdk - the patch fails because it can't find it. I had to rename the directory of the jdk for jdk2, and as soon as it gets deleted quickly and rename jdk2 jdk. Then he applies the patches without problem. A symbolic link would do the same thing.

Waiting for redo log file missing when restore main database using RMAN backup that was taken on the database physical standby

Here's my question after tons of research and test without have the right solutions.
Target:
(1) I have a 12.1.0.2 database unique main enterprise 'testdb' as database instance running on the server "node1".
(2) I created physical standby database "stbydb" on the server "node2".
(3) DataGuard running on the mode of MaxAvailability (SYNC) with roll forward in real time 12 default c apply.
(4) primary database has 3 groups of one-man redo. (/oraredo/testdb/redo01.log redo02.log redo03.log)
(5) I've created 4 standby redo logfiles (/oraredo/testdb/stby01.log stby02.log stby03.log stby04.log)
(6) I do RMAN backup (database and archivelog) on the site of relief only.
(7) I want to use this backup for full restore of the database on the primary database.
He is a DR test to simulate the scenario that has lost every primary & Eve total servers.
Here is how to save, on the database pending:
(1) performance 'alter database recover managed standby database Cancel' to ensure that compatible data files
(2) RMAN > backup database;
(3) RMAN > backup archivelog all;
I got elements of backup and copied to primary db Server something like:
/Home/Oracle/backupset/o1_mf_nnndf_TAG20151002T133329_c0xq099p_.BKP (data files)
/Home/Oracle/backupset/o1_mf_ncsnf_TAG20151002T133329_c0xq0sgz_.BKP (spfile & controlfile)
/Home/Oracle/backupset/o1_mf_annnn_TAG20151002T133357_c0xq15xf_.BKP (archivelogs)
So here's how to restore, on the main site:
I clean all the files (data files, controlfiles oder all gone).
(1) restore spfile from pfile
RMAN > startup nomount
RMAN > restore spfile from pfile ' / home/oracle/pfile.txt' to ' / home/oracle/backupset/o1_mf_ncsnf_TAG20151002T133329_c0xq0sgz_.bkp';
(2) modify pfile to convert to db primary content. pFile shows below
*.audit_file_dest='/opt/Oracle/DB/admin/testdb/adump '
* .audit_trail = "db".
* full = '12.1.0.2.0'
*.control_files='/oradata/testdb/control01.ctl','/orafra/testdb/control02.ctl'
* .db_block_size = 8192
* .db_domain = "
*.db_file_name_convert='/testdb/','/testdb /'
* .db_name = "testdb".
* .db_recovery_file_dest ='/ orafra'
* .db_recovery_file_dest_size = 10737418240
* .db_unique_name = "testdb".
*.diagnostic_dest='/opt/Oracle/DB '
* .fal_server = "stbydb".
* .log_archive_config = 'dg_config = (testdb, stbydb)'
* .log_archive_dest_2 = "service = stbydb SYNC valid_for = (ONLINE_LOGFILE, PRIMARY_ROLE) db_unique_name = stbydb'"
* .log_archive_dest_state_2 = 'ENABLE '.
*.log_file_name_convert='/testdb/','/testdb /'
* .memory_target = 1800 m
* .open_cursors = 300
* runoff = 300
* .remote_login_passwordfile = "EXCLUSIVE."
* .standby_file_management = "AUTO".
* .undo_tablespace = "UNDOTBS1.
(3) restart db with updated file pfile
SQLPLUS > create spfile from pfile='/home/oracle/pfile.txt'
SQLPLUS > the judgment
SQLPLUS > startup nomount
(4) restore controlfile
RMAN > restore primary controlfile to ' / home/oracle/backupset/o1_mf_ncsnf_TAG20151002T133329_c0xq0sgz_.bkp';
RMAN > change the editing of the database
(5) all elements of backup catalog
RMAN > catalog starts by ' / home/oracle/backupset / '.
(6) restore and recover the database
RMAN > restore database;
RMAN > recover database until the SNA XXXXXX; (this YVERT is the maximum in archivelog backups that extends beyond the scn of the backup of the data file)
(7) open resetlogs
RMAN > alter database open resetlogs;
Everything seems perfect, except one of the file log roll forward pending is not generated
SQL > select * from v$ standby_log;
ERROR:
ORA-00308: cannot open archived log ' / oraredo/testdb/stby01.log'
ORA-27037: unable to get file status
Linux-x86_64 error: 2: no such file or directory
Additional information: 3
no selected line
I intended to use the same backup to restore primary basic & helps record traffic and the downtime between them in the world of real output.
So I have exactly the same steps (except STANDBY restore CONTROLFILE and not recover after database restore) to restore the database pending.
And I got the same missing log file.
The problem is:
(1) complete alert.log filled with this error, not the concern here
(2) now repeat it in real time apply won't work since the Party shall LGWR shows always "WAITING_FOR_LOG."
(3) I can't delete and re-create this log file
Then I tried several and found:
The missing standby logfile was still 'ACTIVE' at present RMAN backup was made.
For example, on db standby, under Group #4 (stby01.log) would be lost after the restoration.
SQL > select GROUP #, SEQUENCE #, USE (s), the STATUS from v$ standby_log;
GROUP # SEQUENCE # USED STATUS
---------- ---------- ---------- ----------
4 19 ACTIVE 133632
5 0 0 UNASSIGNED
6 0 0 not ASSIGNED
7 0 0 UNASSIGNED
So until I take the backup, I tried on the primary database:
SQL > alter system set log_archive_dest_state_2 = delay;
This was the Group of standby_log side Eve #4 was released:
SQL > select GROUP #, SEQUENCE #, USE (s), the STATUS from v$ standby_log;
GROUP # SEQUENCE # USED STATUS
---------- ---------- ---------- ----------
4 0 0 UNASSIGNED
5 0 0 UNASSIGNED
6 0 0 not ASSIGNED
7 0 0 UNASSIGNED
Then, the backup has been restored correctly without missing standby logfile.
However, to change this primary database means break DataGuard protection when you perform the backup. It's not accept on the production environment.
Finally, my real questions come:
(1) what I do may not do on parameter change?
(2) I know I can re-create the control file to redo before delete and then recreate after. Is there any simple/fast to avoid the standby logfile lost or recreate the lost one?
I understand that there are a number of ways to circumvent this. Something to keep a copy of the log file waiting restoration progress and copy up one missing, etc, etc...
And yes I always have done no real-time applies "to the aid of archived logfile" but is also not accept mode of protection of production.
I just want proof that the design (which is displayed in a few oracle doc Doc ID 602299.1 is one of those) that backs up data backup works effectively and can be used to restore the two site. And it may be without spending more time to resume backups or put the load on the primary database to create the database before.
Your idea is very much appreciated.
Thank you!

Hello

1--> when I take via RMAN backup, RMAN does not redo log (ORL or SRL) file, so we cannot expect ORLs or SRL would be restored.

2nd--> when we opened the ORL database should be deleted and created

3rd--> Expecting, SRL should not be an issue.we should be able to do away with the fall.

DR sys@cdb01 SQL > select THREAD #, SEQUENCE #, GROUP #, STATUS from v$ standby_log;

THREAD # SEQUENCE # GROUP # STATUS

---------- ---------- ---------- ----------

1 233 4 ACTIVE

1 238 5 ACTIVE

DR sys@cdb01 SQL > select * from v$ logfile;

GROUP # STATUS TYPE MEMBER IS_ CON_ID

---------- ------- ------- ------------------------------ --- ----------

3 /u03/cdb01/cdb01/redo03.log no. 0 online

/U03/cdb01/cdb01/redo02.log no. 0 2 online

1 /u03/cdb01/cdb01/redo01.log no. 0 online

4 /u03/cdb01/cdb01/stdredo01.log WATCH No. 0

/U03/cdb01/cdb01/stdredo02.log EVE 5 No. 0

DR sys@cdb01 SQL > ! ls - ltr /u03/cdb01/cdb01/stdredo01.log

method: cannot access the /u03/cdb01/cdb01/stdredo01.log: no such file or directory

DR sys@cdb01 SQL >! ls - ltr /u03/cdb01/cdb01/stdredo02.log

-rw - r-. 1 oracle oinstall 52429312 17 Oct 15:32 /u03/cdb01/cdb01/stdredo02.log

DR sys@cdb01 SQL > alter database force claire logfile 4;

change the database group claire logfile 4

*

ERROR on line 1:

ORA-01156: recovery or current flashback may need access to files

DR sys@cdb01 SQL > alter database recover managed standby database cancel;

Database altered.

DR sys@cdb01 SQL > change the database group claire logfile 4;

Database altered.

DR sys@cdb01 SQL > ! ls - ltr /u03/cdb01/cdb01/stdredo01.log

-rw - r-. 1 oracle oinstall 52429312 17 Oct 15:33 /u03/cdb01/cdb01/stdredo01.log

DR sys@cdb01 SQL >

If you do, you can recreate the controlfile without waiting for redo log entry...

If you still think it's something is not acceptable, you must have SR with support to analyze why he does not abandon SRL when controlfile_type is "underway".

Thank you

CSA - log file copy

Similar Questions

Maybe you are looking for