Csnnot downlosd updste sutomstic update center eror code .gets me to download and install thehn gives the code 8007045 D hss there has never been a updated on this computer.
code 8007045 D
Hello hopefulbob,
Welcome to the Microsoft Answers Forum!
You can try to run the Windows update tool given that updates do not settle. This tool is offered automatically through Windows Update on computers that have a condition that the tool could solve.
Here is a link to that contains information about the analysis tool:
http://support.Microsoft.com/kb/947821
If this does not work, try to reset the policy for the update of the Windows registry.
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/ ) how to back up and restore the registry in Windows
1. Click Start, type services.msc in the search box, and click OK.
2. double-click on "Windows Update" in the list and stop the service.
3 minimize this window.
4. Click Start, type regedit in the search box, and click OK.
5. save the registry and delete the following registry key:
HKLM\Software\Policies\Microsoft\Windows\WindowsUpdate
6 go back, services and start the Windows Update service.
7. try to do updates now.
Try these steps and if this does not work, please get back to us with what are the updates that fail to install.
Thank you
Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.
Tags: Windows
Similar Questions
-
I have a Windows XP laptop and it will not download or install the updates that it says I need to download and install sp3 but it won't either. There is an error message error code: 0x8024400a
Can you help me
Older than SP3 Windows XP is not supported, this means that you must have SP3 to get the update.
Try to run the tool:
-
I tried to install since 11/12/09 important update KB976098 and continue to get error code 8E5E03FB unknown error. I tried to find the error code, but can't find it. How can I download and install this update?
Quote your full version of Windows (for example, WinXP SP3;) Vista SP1; Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup. Please do it in your next reply.
Short story: If you do NOT live in one of the zones listed in http://support.microsoft.com/kb/976098, you really need not to install this security update not any way so you can hide it just ("don't show me this update"). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Updates will not download and install - NO ERROR CODE - updates remain at 0%
For Adobe Support.
I get the popup "update" whenever I connect to my computer and it gives me an error message but no code error. The update starts at 0% and stays there indefinitely.
It's VERY frustrating because on top of working 10 hours today, I have now lost another hour, trying in vain to find a solution.
By quitting their stand alone suite (CS5, 6 etc) and later support for it, Adobe has FORCED me to use their Cloud Creative suite subscription. While I HATE not being able to buy a standalone program, I like the CC Suite and I'm PAYING for this subscription that provides the latest updates. Now, all of a sudden the updates will not download and install and Adobe wants me to follow a set RIDICULOUSLY long and complicated steps to solve the problem? It's a complete and absolute nonsense!
I am a self-controlled, respectable and intelligent individual, but it makes me want to use profanity! I HAVE NO TIME FOR THIS NONSENSE.
According to the latest information (see: Adobe : Cloud accelerates since 3.4 million paid creative members |) ProDesignTools) there is over 3.4 million people like me PAY for reliable use!
Frankly, I'm so frustrated that I am very close to spearhead a national campaign to educate these users 3.4 million on the negligence of Adobe supported because it's visitors!
WE SHOULD NOT HAVE TO SOLVE THE PROBLEM! ADOBE NEEDS TO SOLVE THE PROBLEM! When you get this figured out, I'll certainly appreciate an e-mail from your. In the meantime. Be aware that each passing day, and whenever I see this pop up, it serves as a reminder that Adobe does not respect what they promised!
Kind regards
Brian Heckman
EMAIL: [email protected]
Hello
If it you please restart your computer and then try to install updates again.
If this does not work, follow the steps mentioned in this doc. KB troubleshoot Adobe Creative Cloud download and installation of the questions for help.
Kind regards
Nicos
-
error code 80072EFE appers when I try to download and install updates___
error code 80072EFE appers when I try to download and install updates
Hello
This rootkit has been known to cause this problem.
TDsskiller (Rootkit removal tool)
http://support.Kaspersky.com/viruses/solutions?QID=208280684Then, restart and check the updates.
To search for other malware use this online scanner:
New Vista and Windows 7 version
http://OneCare.live.com/site/en-us/Center/whatsnew.htm==================================================================
If necessary:
Run 1 SFC
Start - type this in the search box-> find CMD at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228------------------------------------------------------
Then check out this article:
Update to install updates<-- check this="">-- check>
http://support.Microsoft.com/kb/836941Do these two and try updates
Description of the update tool of the system for Windows Vista, Windows Server 2008, for Windows
Server 2008 R2 Release Candidate for Windows 7 Release Candidate
http://support.Microsoft.com/kb/947821/How to reset the Windows Update components? -a Mr Fixit
http://support.Microsoft.com/kb/971058=============================================
If necessary you can incident free get reports however the above should take care of it for you.
Windows updates - free Incident report
Go here and click on-> Windows Update fails while searching, downloading or installation of updates
http://support.Microsoft.com/GP/wusupport#tab3The security updates, you can get free support Incident report
http://www.Microsoft.com/protect/resources/support.aspxI hope this helps and happy holidays!
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Updates are always safe to download and install on my computer?
After you receive the message that I have updates to download and install, is ALWAYS completely safe to do? With my last PC, I got a typical announcement, completely legitimate-looking that I had "several important updates" that I needed to download and install. I have had these ads before on the necessary updates and always took the lead with download and install them. BUT after the download and installation of these special "updates", my computer was completely dead and never worked again - I couldn't even get it to blue screen! Absolutely no response when I turned it on. Since there was nothing wrong with it before these "updates", I can't help but conclude that some of these "updates" are not only wrong, but also deadly!
Hello
Yes always install updates. They solve the problems of security and improve the stability of Windows. If you have any problems, create a new question and we can help you solve these issues :)
concerning
André"A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/
-
My automatic update of Windows 7 did a great job, whenever I discovered a new criticism / or useful update is available on the microsoft site / or any other tech site, I always find the update is alreay installed via Windows automatic update (thanks microsoft)... but I want to save all these (the installation program updates (, of course) that I can use to update all the other windows 7 running pc with no internet connection.
is this possible?
My automatic update of Windows 7 did a great job, whenever I discovered a new criticism / or useful update is available on the microsoft site / or any other tech site, I always find the update is alreay installed via Windows automatic update (thanks microsoft)... but I want to save all these (the installation program updates (, of course) that I can use to update all the other windows 7 running pc with no internet connection.
is this possible?
Updates automatically downloaded cannot be reused. Suggest you open the link "View update history" of the icon of the Windows Update control panel and write updates have been downloaded and installed.
Then download and save them from the Microsoft Download Center .
Just enter the number in the field to Search All Download Center and then click on the "magnifying glass" to start the search.
You can also change the language and geographic location by clicking on the link edit in the top right of the page.
MowGreen MVP Data Center Management - update of safety Consumer Services -
Automatically download and install updates is set, it is not just to do the job. I have literally click on install now for EVERY single update. I tried to put different time make this hope that would be "straighten" out there but... Thank you Ed M.
Hey Ed M.
1. you receive an error message or error code?
2. the problem occurs with the individual update installation?
I suggest to follow the article mentioned below and check to see if that does the trick:
Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services
http://support.Microsoft.com/kb/906602
Hope this information helps. Let us know if you encounter problems under Windows in the future. We will be happy to help you.
-
My XP computer keeps trying to download and install this update. It is a zero-byte file.
Any help would be appreciated.
Jack
Original title: Windows XP (KB2686509)
A lot of discussions about this particular update:
more particularly:
-
Original title: windows update fails problems to download and install the updates and windows firewall and defender will also not start?
Windows update fails to download and install the updates and defender and windows firewall will not also start? What can I do?
Hi Speete66,
· You receive an error message or error code in Windows Update?
· What happens when you try to start the windows firewall and windows defender? You receive an error message?
· You have any other antivirus software or protection installed on the computer?
· Did you do changes on the computer before the show?
Follow the suggestions below for a possible solution:
Method 1: I suggest you to consult the article in the Microsoft Knowledge Base and check if it helps.
You cannot install some programs or updates
http://support.Microsoft.com/kb/822798
Method 2: If the method above does not help, then you can reset Windows Update components and check.
Reset Windows Update components.
http://support.Microsoft.com/kb/971058
You can also view the article mentioned for more information below:
Problems with installing updates
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
Let us know the results.
-
my computer has never been able to upgrade to vista service pack 2, it is said that he failed and error code 80070570. I have also a box gray volume that keeps popping up on my screen. It is grey with a yellow speaker and a red volume bar that says 0. I tried everything on the forums as a clean boot and the registry editor. Any ideas?
I recommend you:
Go to a command prompt:
Start, all programs, accessories, command prompt.
Right click on command prompt and select "Run as Administrator" http://windows.microsoft.com/en-US/windows7/How-do-I-run-an-application-once-with-a-full-administrator-access-token > and run sfc/scannow http://support.microsoft.com/kb/929833>
Type exit (to close the elevated command prompt window)
Reset
See if that solves the problem.
If not, run the update http://support.microsoft.com/kb/947821system tool >
02:42:25 amUTC 23/08/11
-
Original title: Windows of Vista SP2 update fails. Vista Upgrade option grayed out
Is no longer, I can download and install the updates for Vista SP2. I get error 80070490, who reports that Vista Service Pack 1 is no longer up-to-date. I downloaded and installed the "System Update Readiness Tool" without change in error. Repair Vista with DVD does not give me the upgrade option. My SP-2 is corrupt? Vista Service Pack 2 also went out of support?
Kind regards
Ed S.
Hello
Method 1:
Follow the steps in troubleshooting section and check if that helps.
You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
http://support.Microsoft.com/kb/958044
Method 2:
You can also read this article and check if it helps.
How to uninstall Windows Vista service packs as a troubleshooting step
-
Impossible to download and install windows updates
I'm unable to download and install windows updates. message says 'some updates were not installed' code 80070490 windows update encountered an unknown error. Laptop did not come with a disc so I can't reinstall windows in this way. Help please
Hello
read this:
You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
http://support.Microsoft.com/kb/958044
If you do a repair Upgrade install borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation
read the below tutorial on how to perform a repair installation
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html
______________________________________________________________
and here are the different ways to reinstall vista;
Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it
they do it for a nominal cost of $
also ask them if you have a recovery partition on your hard drive to get back to the way you bought
you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer
Ask them of the exact key sequence
or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc
Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer
they contain all versions of vista
This is the product key that determines which version of vista is installed
http://www.theeldergeek.com/Vista/vista_clean_installation.html
How to replace Microsoft software or hardware, order service packs and replace product manuals
-
Impossible to download and install applications on Windows Store, error code 0 * 80070422
Original title: an error code 0 * 80070422
Windows 8 pro
I'm unable to download and install applications on windows store.
An error code 0 * 80070422 occurred.
What should I do?
Hitesh salvation,
For a better understanding of the App question, did you do last changes on the computer before this problem?
This problem could occur due to these reasons.
- Because the Windows Store Cache corruption.
- If Windows Update services are not started.
- Because incorrect settings.
Try the steps listed below and see if it helps.
Method 1:
I suggest you to clear the cache to store and check if it helps.a. press on ""key Windows + R ". "
b. type wsreset.exe , and then click OK.
Method 2:
I suggest you to manually start the Windows Update services and (BITS) Background Intelligent Transfer Service. Check if it helps.a. click the Windows key + R and type services.msc.
(b) and press enter.
c. in the services window scroll down for Windows Update Service.
d. right-click on the service and click on Properties.
e. make sure that the Startup type is set to Automatic and the service status is started.
f. click apply and then click ok.
You can repeat the steps above for Background Intelligent Transfer Service (BITS).
Method 3:
If the problem persists, I suggest you to return the item and check if it helps.Why can't find or install the application on the Windows Store?
Hope this information helps. Answer the post with an up-to-date issue report to help you further.
-
Whenever I have download and install the vista security updates I lose Mozilla Firefox. The program and the icon still exist but do not respond. By clicking on the icon or clicking on the program files does produce absolutely no response.
So any time I install updates, I have to run internet explore and firefox redownload. Most annoying. Help.
P.S. Yes, firefox is my default browser.Some problems occurs when your Internet security program has been implemented.
trust the previous version of Firefox, but not more acknowledges your
update as being approved. Now how do I solve the problem: to allow
Firefox to connect to the Internet- Make sure your Internet security software is up-to-date (for example, you are using the latest version).
- Delete Firefox to list your program of programs approved or recognized. For detailed instructions, see
Configure the firewall so that Firefox can access the Internet. {web link}
Maybe you are looking for
-
Can't download or send since updated to 31.0 TB
As soon as updated Thunderbird updated to 31.0, I can't send or receive.When I click on 'Get the Messages', the status bar displays "Stan: connection to the e-mail...". ", and then" Stan: connected to the mail... ". ", which remains without downloadi
-
Hi, I have a problem with my pitch bend wheel on my pc - 300 midi keyboard Roland. The Modulation part works but when I try to pitch bend a note using the same logic of wheel just plays a continuous note. Can someone give me some advice please? Thank
-
LabVIEW freezes randomly while loop
Hello world I'm relatively new to LabView, I like to think that I learned a lot through trial and error and read this forum, but I am confused by something here. I hope someone out there has an idea. I have a program that controls a pump. I am commun
-
Is there a way to find the total number of steps failed during a given run. I see that the State step information are available but it is for the various steps. http://zone.NI.com/reference/en-XX/help/370052H-01/tsapiref/reftopics/stepproperties/ I'm
-
I can not open help and support
I can't open Windows Help and support. When I click it it says "Windows cannot open help and Support. because a system service is not running. To resolve this problem, start the service named 'help and Support '. How to start this service. I use win