When you have a dynamic LIVES in a class of LV, what happens when it is part of an executable file?

Similar Questions

• I looked at my report system and have several that say "the system resumed stand-by", what happens almost every day. My computer worked fine, what is all this history?

  I use Uniblue to clean my mistakes, if he had a year now and didn't have not encountered any problems. But what is all the stuff 'recovery from sleep mode? Thanks for any help.

  I thought that you said in your first post that you have no problem.

  The release of the standby mode is the computer to wake. Normal.

  With EventIDs you need the source it's EventID + Source. There may be hundreds of EventID 302. And as there is no complete list, we also have the text. This is a partial list - http://www.eventid.net/display.asp?eventid=302

  Registry cleaners tend not to do much (if they are safe to use) or try things that the programmer does not understand and are not safe. Problems may not be noticed for long periods.

  If you plug device USB 2 (or 1) USB 3 (or 2), you will get the message to plug it into a faster port. My computer has USB 1 and 2 USB ports.

• you have makeContextMenu() method in the field class?

  Hi all
  I use the BlackBerry Plugin on Eclipse.
  I have installed BlackBerry by JRE 5.0.0 project.

  I used the class field on my program. But I can't use certain methods in this class, for example makeContextMenu() method.

  I try to develop 5.0.0 JRE packages on the left side of the window of the Eclipse and I found the net.rim.device.api.ui.Field class. I see all the methods in this class, but there is a method is "YELLOW" and these methods cannot use in my program.

  Can you help me to solve this problem, thanks a lot!

  You must override the method, do not call it directly.  You can see an example of its use in the example here:

  http://supportforums.BlackBerry.com/T5/Java-development/create-a-scrollable-image-field/TA-p/444955

• I deleted my browsing history and all my favorites have been removed as well, I don't know what happened and I can't seem to find them?

  I went through my computer to clear the history, what I have done before and ALL my favorites have disappeared. I can't seem to find anyway and I want to know if/how to get back them.

  What method did you use to remove your browsing history?

  Firefox instant guard of your bookmarks over time so that you can restore to an earlier date. You can try the procedure of recovery described in this article and see if Firefox lists all earlier dates you can choose: restore bookmarks from a backup or move them to another computer.

  Are they available?

• Why creative Cloud hangs my computer every time I have try and open it? The last time this happened he had to make a piece of file with the new name.

  Creating cloud keeps freezing my computer, the last time it was that it had something to do with the re-identification of a specific file. I was on the phone with someone who refuses to believe that he was not a fault with my computer until more than two hours later, when he admitted they had problems of this kind and the cat. I thought that the problem has been resolved but...

  Hi callumr40041577,

  You can try to reinstall the "Creative Cloud Desktop App" by following this Guide:

  " Uninstall the Adobe Creative Cloud desktop application

  Please try it and let us know if it fixes your problem or not

  Kind regards
  Maurice

• 'Aid for this VI' menu item is grayed when VI is built in an executable file

  Hello

  When I run a VI and select the help topic 'Help for this VI' it opens my help file (MyHelp.chm).

  But when I create an executable of this VI the menu item is grayed out!

  Is this a normal behavior?

  Problem solved.

  I did a new project file with my current LV8.6 and the 'Aid for this VI' menu item now works.

  The project file I was using was full of LV7.0 and probably causes this problem.

• I have no sound no audio device, do not know what happened

  Windows XP

  Jeanine salvation,

  If this is to happen, try a system restore to a restore point right before that the problem started.  See http://support.microsoft.com/kb/306084. Sometimes this simple process made the rounds and sometimes that doesn't help - but it is easy and worth if she has recently begun.

  Good luck!

  Kosh

• Can you view the contents of subfolders when you have a selected folder in windows Explorer?

  You have a folder called folder.

  You have a sub folder called folder B.

  In windows Explorer if you have the one selected folder is it possible to view the contents of the folder B then that file is still selected?

  Hi Goatberg,

  Unfortunately, there is no way to show contents of the folder when the parent folder is always selected.

• Unable to connect with RDP after you have configured the port forward

  I have configured my router with port pushing forcefully with port 3389. Now when I try to rdp to the pc from outside I get the following error:

  Remote Desktop cannot connect to the remote computer to one of the following reasons:

  1. remote access to the server is not enabled

  2. the remote computer is disabled

  3. the remote computer is not available on the network

  I checked that all these 3 does not apply to me. I was able to RDP pc (with the local ip address) from another pc in my network home but not from outside. Could someone help me please?

  Is the computer on which you want to connect with Remote Desktop [DRC], IE. the DRC, by using a host address static IP on your LAN? In the contrary case and the computer is restarted its possible its LAN IP address changed by denying any plan of port forwarding you set up in your router. Go to the site CanYouSeeMe and host DRC computer test.

  http://www.canyouseeme.org

  Also, when the connection to make sure that you really test from a client outside the DRC and does not use the public IP address of the router from a local computer on your local network.

  http://theillustratednetwork.MVPs.org/RemoteDesktop/TroubleshootingDiagrams/Basic.html

  Finally you are sure that the public IP address of the router has not changed? If you have a dynamic IP from your ISP, you can use a free as no - IP.com that maps a name to your public IP address. Call using the fully qualified domain name. Many routers support which is a free service like DynDNS for example. You can also download and install a small program on the host of the DRC. The program communicates with the No - IP or DynDNS servers on a regular basis. The server so you know what your current IP address and that map to your fully qualified domain name.

  http://www.no-IP.com/?utm_source=MSN&utm_medium=CPC&utm_term=no%20IP%20.com&utm_campaign=brand+MSN

  http://dyn.com/DNS/

• "you have been connected with a temporary profile.

  I can't find the words to express the degree of anger with microsoft! I use W7 for a few weeks and just started getting the message "you have been connected with a temporary profile" and lost everything that was on my desk (shortcuts application, saved files and settings). I scoured internet (including MS help/support/etc.) and found the HUNDREADS of comments on this problem but with NOT a SINGLE solution that works and WITHOUT EXPLANATION of why or how it happened. This simple question is W7 TOTALLY USELESS and I'm trying to figure out how to recover my money on buying. If I could get my hands on the neck of the W7 developers, I'd be more than happy to squeeze the @$ % # out of them and they could keep my money. It's PATHETIC and a technology CRIME! All comments with a value of manufacturing?

  Hello

  Data is not lost and is accessible from any ADMIN including the hidden Admin account.
  Check the C:\Users\Your user name.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
  This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

  You can use the hidden - administrator account to make another account as ADMINISTRATOR with password even
  (or two with the same password) use a test or fix the other.

  You can run the Admin account hidden from the prompt by if necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• You have won in the Splash microsoft Award. ? real or spam

  receipt above e-mail

  Probably spam, but you have not we gave something to go.

  What email headers can tell you - it's actually a MS Server?

  He invites you to visit a website package or complete the attached request form?

  Details please!

• "You have been disconnected" when you use Windows Live Mail

  Hello

  Recently, when I open Windows Live Mail, sometimes Skype will be disconnected me with a message saying "you have been disconnected. What is the cause and how I fixed that?

  Unfortunately, it is a known problem and no solution is yet available.

  http://community.Skype.com/T5/Windows-desktop-client/having-to-log-back-into-Skype-every-time-I-open...

• When to call DSDisposeHandle when you have a DLL function acting as a dynamic data DS source extensible?

  Hello

  I have a dynamic function DLL acting as a data source within a LabVIEW application (see attachment) - I use DSNewHandle to dynamically allocate an array 2D handle storage via the Manager memory LV for arrays of arbitrary in application size data. I had assumed that these blocks of memory would be willing (Magic) when appropriate by the LabVIEW built in blocks that are sitting downstream, however, is not the case for treatment and the system LabVIEW memory usage continues to increase until you quit LabVIEW environment (not just if the offending application is stopped or closed).

  So my question is how and where to mop up the table used for buffers in the treatment of the application of the chain and how do I know when the buffers are really exhausted and not be re-used downstream (for instance two 2D paintings are first grouped into a 2D complex table by the re + im at the operator complex labview - is data memory out of this totally different stage of entries or is - a) modified version of the entry tables - if they are totally different and 2D to entry tables are not wired in all other blocks why the operator not have input data banks?)

  Maybe Im going to this topic in the wrong direction have the DLL data source dynamically allocates space data tables? Any advice would be welcome

  Concerning

  Steve

  So instead of doing:

  DLLEXPORT int32_t DataGetFloatDll(... , Array2DFloat ***p_samples_2d_i, ...)
  {
      ...
  
      if ( p_samples_2d_i )
      {        // *p_samples_2d_i can be non NULL, because of performance optimization where LabVIEW will pass in the same handle        // that you returned in a previous call from this function, unless some other LabVIEW diagram took ownership of the handle.        // Your C code can't really take ownership of the handle, it owns the handle for the duration of the function call and either        // has to pass it back or deallocate it (and if you deallocate it you better NULL out the handle before returning from the        // function or return a different newly allocated handle. A NULL handle for an array is valid and treated as empty array.
          *p_samples_2d_i = (Array2DFloat **) DSNewHandle( ( sizeof(int32_t) * 2 ) + ( sizeof(float) * channel_count * sample_count ) );
  
          // Generally you should first try to insert the data into the array before adjusting the size        // the most safe would be to adjust the size after filling in the data if the array gets bigger in respect to the passed in array        // and do the opposite if the adjusted handle happened to get smaller. This is only really important though if your C code can        // bail out of the code path because of error conditions between adjusting the handle size and adjusting the array sizes.        // You should definitely avoid to return from this function with the array dimensions indicating a bigger size than what the        // handle really is allocated for, which can happen if the array was resized to a smaller size and you then return because of errors        // before adjusting the dimension sizes in the array.         ........        (**p_samples_2d_i)->Rows = channel_count;
          (**p_samples_2d_i)->Columns = sample_count;
      }
  
      ...}
  

  You should do:

  DLLEXPORT int32_t DataGetFloatDll(... , Array2DFloat ***p_samples_2d_i, ...)
  {
      ...
      MgErr err = NumericArrayResize(fS /* array of singles */, 2 /* number of dims */, (UHandle*)p_samples_2d_i, channel_count * sample_count);
      if (!err)
      {        // Fill in the data somehow
         .....       
  
          // Adjust the dimension sizes        (**p_samples_2d_i)->Rows = channel_count;
          (**p_samples_2d_i)->Columns = sample_count;
      }
  
      ...}
  

• When I log into Windows Live Mail I get the following message: "you have unsent messages in your Outbox. You want to send them now? Yes or no"

  When I log into Windows Live Mail I get the following message: "you have unsent messages in your Outbox. You want to send them now? Yes or no,"that does this every time as I have disconnect. I look in my Outbox and there aren't waiting for messages. How can I get rid of this pop up?

  Hi LarryMorton,

  Thanks for posting your question in the Forum of the Microsoft answers Site. Your question would be better addressed by experts in the in Forum Windows Live Mail. Please repost your question here,

• error 105 / 108 since 5 days I repeatingly receive them when you try to connect to windows live hotmail. I get automated answers that have nothing to do with my problem, CAN someone tell me in lay terms lie, what happens?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello mikewithmagnum,

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to Hotmail and would be better suited to the Windows Live community. Please visit the link below to find a community that will support what ask you:

  https://windowslivehelp.com/product.aspx?ProductID=1

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.