CUCM and IM &; P 10.5.2 disaster recovery
Come see if I any who can sanity check it.
I noticed the other day on my IM & P servers that my last successful backup was 132 days ago. Now on my CUCM I do daily backups during the week, UCM, CDR_CAR, and IMP_AND_PRESENCE backup and I can see all 3 are saved OK to my remote destination.
For me, this sounds like my Pservers & IM are saved through the master agent of the CUCM disaster recovery if the backup of the annex on IM & P servers themselves.
It would also sound to me that I should be able to retrieve my IM & P servers, through backups made by CUCM.
I can't seem to find a straight answer in the Disaster recovery Guide is.
anyone can shed some light on this? Very appreciated
Dennis, your understanding is quite correct in this regard. IM & P needs to connect to the master DRF on the CUCM pub for the mechanism of the DRS only it doesn't have its own master DRF starting version 10.x when added as a subscriber to the cluster of CM.
Infact, there was a known below defects for a problem in which IM & P will not appear while you take the backup of the Publisher CUCM DRS:
https://Tools.Cisco.com/bugsearch/bug/CSCus64888/?reffering_site=dumpcr
Concerning
Deepak
Tags: Cisco Support
Similar Questions
-
Configure Jabber for Mac with local CUCM and WebEx Connect
Hi, I was wondering if someone could set up the Jabber client Mac 8.6.2 to use the server of presence of WebEx Connect with a local farm the CUCM and connection of the unit. The tab preferences accounts show or allow the addition of voice services. I added work CUCM preferences plist file local, which, according to me, are the correct entries, however I still can't see the accounts under the Preferences tab. We currently do not have a presence server local cisco where the obligation of trial WebEx Connect Server because I can't get past the first step of configuration without it.
concerning
Paul
You must connect to your Webex portal and activate these settings to connect. Once they are allowed, log out/log in Connect and you should be able to configure CUCM TFTP, etc..
-
CUCM and UCCX version compatibility
Hello
We are re-hosting UCCX to vmware with CUCM 9.x version 8.5.1
CUCM and UCCX both will be on VMware.
Someone let me know what CUCM 9.x supports UCCX 8.5.1base.
We have only UCCX 8.5.1base DVD version for installation. I'm looking for the compatible version of 9.x CUCM to install.
Pls let me know the CUCM 9.x compatible with version 8.5.1base UCCX
Rgds
Rajesh Kumar
Hi Renon,
This info is on Page 40 of the attached guide;
Software and hardware compatibility for Cisco Unified Contact Guide
Center Express and Cisco Unified IP IVR
See you soon!
Rob
"May your heart always be joyful".
And your song may always be sung
Can remain you forever young. "-Dylan
-
Voicemail configuration base with CUCM and connections of the unit
Hello again,
I'm still very new to CUCM. I am configuring a CUCMB 6.01 test deployment. He has connections in the integrated unit. I have 2 DNs assigned to users and Cisco IP phones. I use MGCP (Cisco 3745 with 2FXO as gateway). Now, I'm trying to extensions of voicemail installation for the users. I read a lot of documentation on CUCM and unity, but I know that Unity Express is not what I need, and that you have not found information on the basics of implementing voicemail for users of CUCM.
Users are DN 1001 and 1002 respectively. They are part of a list of hunting (broadcast) so that the arrival of incoming calls, both phones will ring simultaneously. Not sure if this has any bearing or not. I would like to be able to put in place so that each DN rings on the IP phone say 6 times, then go to a Unity voicemail box configuration for that user. I have already imported users 2 in the unit. I ran the voice messaging port configuration wizard. Everything looks as if it runs correctly, but I'm stuck really share say CUCM to route the call to the mailbox of the unit. Probably the simplest part. Ideas or help on this would be much appreciated. Thank you in advance.
Impetuous salvation,
CUCM works this way
So the fact that 1001 and 1002 receive calls via a group has a significant impact on this config.
You must keep in mind that a call that is routed through the fighter pilot will always ignore the CFWD settings on phones of hunting member of the group. The normal way to control it then is through disconnection of the Group Hunt members phones combined with the front fighter pilot level settings.
The following section describes how the parameters to call it forward on the phones of individual members Hunt are ignored when presented a call via the hunting feature. Here's a clip;
Hunting and call forwarding
The concept of hunting differs from call forwarding. Hunting allows Cisco Unified Communications Manager to extend a call to one or more lists of numbers, where each such list can specify an order of hunting which is selected from a fixed set of algorithms. When a call extends over a part of hunting of these lists and the party does not answer or is busy, hunting resumes from the next part of hunting. (The next party of hunting varies according to the current hunting algorithm). Hunting has so ignore settings call forward No Answer (CFNA), call forward busy (CFB) or call before all (CFA) for the party to attempt (group member line phones).
Cisco Unified Communications Manager offers the possibility to redirect a call when hunting fails (that is, when the hunt ends without a part of hunting to the respondent, due either to exhaust the list of numbers of hunting is to expire). If used, this final redirection includes an automatic call forwarding action. Therefore, the fighter pilot Configuration window includes call forwarding configuration concepts which are similar to those found on the directory number Configuration window.
Example of a call hunt
Although hunting is different from the transfer, Hunt often develops as a call that gets forwarded to a certain number of fighter-pilot. The protective cover of appeal extends from hunting to allow the final drive after two exhausts of hunting or expires.
A typical call calling hunting can include the following phases:
The appeal of hunting through groupings of posts set up according to the algorithms implemented for each group. Hunting is successful (if it meets a hunting party), exhausts (if all parts of hunting are tempted, but no response), or expires (if the deadline set by the Maximum hunting timer runs out before that all parties are tempted, and none of the parties who have tried to answer).
For the purpose of this example, we assume that hunting does not succeed.
If a form any of the final drive is configured, the call forward for a next destination; otherwise, the call is released.
Maximum hunting timer
The Maximum Hunt Timer field on fighter pilot Configuration window allows the administrator to enter a value (in seconds) to limit the hunting through a list of hunting season. After gaps in the time specified, if hunting was not successful, the call is transferred to a voicemail system, a specific compound number, or some personal treatment (if configured) or the call is released.
The good doc.
http://www.Cisco.com/en/us/docs/voice_ip_comm/CUCM/Admin/6_0_1/ccmsys/a03rp.html#wp1078922
If the call goes unanswered or all Member phones are disconnected, then an attacker needs to be applied at the level of the "fighter pilot".
Hunt the settings forward
Before hunting without an answer - when did not answered the call which is distributed through the list of hunting at a specific time, this field specifies how to transfer the call.
Destination this parameter contains the number of the directory to which calls are forwarded.
Before busy hunt - when the call which is distributed through the list of hunting is busy at a precise moment, this field specifies how to transfer the call.
Destination this parameter contains the number of the directory to which calls are forwarded.
Maximum Timer Hunt - enter a value (in seconds) that specifies the maximum duration for hunting. (Used in conjunction with Forward busy hunting)
In your case, it is best to configure the DN of a fighter pilot in the extension of alternatives under the 1001 and 1002
mailbox.
I hope this helps!
Rob
-
Question about commissioning of the E20s - CUCM and TMS
If we now run software CUCM 8.6.2 and 4.1 E20. I played with CUCM and TMS supply by and a few questions.
It seems that there are some features that can be set via the TMS models that cannot be resolved via CUCM (MTU, custom, etc commands). Is it possible to apply these settings through TMS while having the unit registered in CUCM?
Essentially, I want my call recording platform CUCM and control, but want to keep the granularity that TMS offers in terms of commissioning etc.. I expect the same problems with C-series, etc.
Am I right in saying that, in order to get the E20 to join CUCM, I need to define the external Manager to "CUCM", and thus eliminate any possibility of TMS to manage? Otherwise, what is I could have managed by TMS and then set the SIP of the E20 to point to CUCM via templates in TMS?
Any tips on that?
Hello
Having both TMS and CUCM to manage endpoints is not a good idea (yet). TMS and CUCM will return to each of the other toes with unpredictable results.
With TMS 13.2, I understand that you should be able to import the CUCM in TMS and then find all systems registered to it and import these into TMS, however in this case TMS plan only systems conferences and will manage them not active (you can see status of the call as well). 13.2 TMS is not yet released, so that's what I said must be in this version.
So basically now if you use CUCM, use CUCM provisioning and don't use TMS. We focus on interactions with systems registered with CUCM TMS and it will be more developed on this in the future. I recommend you check out the TMS13.2 release notes released to see if it is mentioned.
Thank you
-
SIP URI B2B calls via CUCM and Highway
Hi all
Cannot find out how to configure the SIP URI from SX codecs, recorded calls on CUCM.
I CUCM and IM & P 10.5.1 a pair of X8.5.2 expressway with two areas of course - for B2B calls, and the external jabber.
I want to make calls of SX-codecs outside via SIP, by using the URI field, for example, [email protected] / * / or [email protected] / * /. How can I configure that?
I already have the routing model, which is the SIP Trunk for Exp - C, for H323 calls by ip address. Is it possible to make a routing model to call the SIP URI?
You can see my deployment in this image.
Best wishes
Igor
Hi Igor
These guides will help you resolve your issues:
https://supportforums.Cisco.com/ru/video/12362936
BR Oleksandr
-
9.1 CUCM and 8.5 CUPS compatible?
Hello
made the CUPS 8.5 is compatible with the CUCM9.x?
We plan to upgrade a CUCM8.6 to 9.1. But do not want to upgrade the CUPS8.5.
the CUP8.5 will work with CUCM 9.x?
I have not seen any document on the compatibility matrix, that's why I sent this message here.
Kind regards
Antra
No, the major and minor version must match, you MUST upgrade to IM & P 9.1.
From 9.x, CUCM and IM & P versions must be aligned to the x.y level.
-
can't make an external call with CuCM and H323 gateway
Hi experts, I have a problem with CuCM and h323 Gateway. I use a 2811 router to make a gateway H323, CuCM server and Switch layer 2 build a VoIP LAB, this my network:
and my router configuration:
Current configuration: 2335 bytes
!
version 12.4
horodateurs service debug datetime msec
Log service timestamps datetime msec
no password encryption service
!
router host name
!
boot-start-marker
boot-end-marker
!
forest-meter operation of syslog messages
!
No aaa new-model
!
!
!
dot11 syslog
IP source-route
!
!
IP cef
DHCP excluded-address 192.168.1.1 IP 192.168.1.10
!
IP VOICE dhcp pool
network 192.168.1.0 255.255.255.0
option 150 ip 192.168.1.2
default router 192.168.1.1
!
!
No ipv6 cef
!
Authenticated MultiLink bundle-name Panel
!
!
voip phone service
h323 connections allow h323
allow connections h323 to SIP
allow connections sip h323
allow sip to sip connections
service additional h450.12
Fax protocol cisco
!
!
!
vocal h323 class 1
H225 timeout tcp establish 3
!
!
!
translation of the voice-rule 1
rule 1 / ^ 9.
!
!
voice translation-profile PSTN
translate 1 called
!
!
voice-card 0
!
!
application
Service flash aa1: its - cisco.2.0.2.0.tcl
paramspace English language en
paramspace English index 1
Param aa-driver 0839959204
paramspace location English flash:
prefix English paramspace
!
!
!
Archives
The config log
hidekeys
!
!
interface FastEthernet0/0
IP 192.168.1.1 255.255.255.0
automatic duplex
automatic speed
H323-gateway voip interface
port of link voip H323-gateway 192.168.1.1
!
interface FastEthernet0/1
no ip address
Shutdown
automatic duplex
automatic speed
!
IP forward-Protocol ND
no ip address of the http server
no ip http secure server
!
!
!
control plan
!
!
!
voice-port 0/0/0
cover of the echo - cancel 32
connection ERA opx 3100
Description 08395959204
activation of the caller ID
!
voice-port 1/0/0
!
voice-port 0/0/2
!
voice-port 0/0/3
!
!
!
1010 Dial-peer voice pots
Service aa1
incoming called number 08395959204
direct line to inside
port 0/0/0
!
voice pots Dial-peer 2020
PSTN description
translation-profile outgoing PSTN
destination-model 9 t
Setup progress_ind allow 3
progress_ind enable progress 8
port 0/0/0
Forward-digits all the
!
Dial-peer voice 10 voip
destination-model 1...
Setup progress_ind allow 3
progress_ind enable progress 8
h323 voice-class 1
session target ipv4:192.168.1.2
DTMF-relay h245 alphanumeric
Codec g711ulaw
No vad
!
!
!
!
Line con 0
line to 0
line vty 0 4
Cisco password
opening of session
!
Scheduler allocate 20000 1000
end
I have configured the gateway h323 and attach files to router parttern on follow CUCM
What is the problem and how to solve?
Thanks for all the help.
Your DP pointing CUCM is wrong, or your ÉRA OPX, depending on what you need.
voice-port 0/0/0
cover of the echo - cancel 32
connection ERA opx 3100
Description 08395959204
activation of the caller ID
Dial-peer voice 10 voip
destination-model 1...
Setup progress_ind allow 3
progress_ind enable progress 8
h323 voice-class 1
session target ipv4:192.168.1.2
DTMF-relay h245 alphanumeric
Codec g711ulaw
No vad
Your DP is waiting for 1... and you send 3100, they must match.
You might need to change the significantt numbers and entering CSS, but only you can know
For outgoing, you are throwing 9 predot, but again, expect it in your RFP, again, change as you need.
voice pots Dial-peer 2020
PSTN description
translation-profile outgoing PSTN
destination-model 9 t
Setup progress_ind allow 3
progress_ind enable progress 8
port 0/0/0
Forward-digits all the
You cannot transfer the numbers all send you also 9 for each call
Change your configuration you want / need.
HTH
Java
If it helps, please note
-
OBIEE Disaster Recovery can be configured without CARS and shared storage?
Hi people,
As say the topic, I'm looking for advice on disaster recovery. What I find in the docs pointing me to the high availability configuration, or maybe I'm simply not find the docs I'm looking for. And it always points to the RAC, etc. of shared storage. My database is already configured to Dataguard and I want to do things this way, with a recovery site which isn't always upwards and a part of a cluster (although it's very well as long as the CAR is not involved), I'm looking for some feedback on how people do things. I have 11.1 now, but will be upgrading to 12.2 soon. Just a straight stitch to the documentation would be useful if I'm missing just that.
Thank you
-Adam
Since you have already configured Dataguard and in a DR situation, you will be switching/switch on your course in standby mode and it will active db. All this is fine. You can do the same with instances of weblogic OBIEE. You can clone your binaries installed using tools provided by Oracle cloning, or build binaries from weblogic with the accurate determination of drive on your Dr. use the pack of weblogic server and then unzip tool to archive your entire weblogic domain and it Unarchive in your prepared DR server.
Now, you have to just challenge the hostname (s) of your domain to point to your database JDBC data sources and weblogic.
To facilitate the task, you can change the host name used by weblogic to host alias that can be remapped in DNS during DR. Similarly, you can change the JDBC connection string so that it can automatically select the active database as long as you use a database instead of a SID service name in the connection string.
You will need to regularly make a pack on your weblogic domain in order to maintain an up-to-date backup of your domain proximity. Similarly, if you have reports that are stored on the file system, they must also be backed up regularly so that they can be restored.
-
Procedures and guidelines for Disaster Recovery (DR)
Hi all
Our TI auditor asked me to submit/provide procedures for guidelines for disaster recovery.
I tried Google, but the process docs seem so vast and complex.
We have a dataguard configuration. Can I give him to the contrary the docs on how to recover/restore using Data Guard?
Can you share me link to good documentation on the recovery?
Thank you
Petra k.
> We have a dataguard configuration
Generally, the documentation is created with the Setup program. Documentation describing the configuration. Documentation detailing the procedures for different situations. Documentation that lists the commands to use and the expected responses for commands. Documentation that indicates the error handling methods if you try the commands.
Your dataguard configuration is incomplete without these documents.
Hemant K Collette
-
sys and system schema are expired &; locked after disaster recovery.
Hi all
In one of our development database, I conducted disaster recovery and he succeeded.
After completing the recovery thre, sys and system schema are expired & locked.
So, I'm not able to carry out any type of operation that is performed by the user sys and system.
Database Version: 11g r2
Operating system: RedHat 5.5
Please please suggest me how can I solve this problem?
Thank you
Pitard.It might be
What is the status of the users in the source database from which you have taken backup? Maybe he has so locked even after performing refresh status remains the same.
See your profile stats below. All have remained unanswered. You simply test patience? If this isn't the case, close all threads as answered. Clean up the forum.
User profile for pitard
Pitard
Handle: Pitard
Status level: Beginner
Join date: March 4, 2010
Total messages: 9
Total Questions: 8 (8 open)
Viren namePublished by: CKPT on February 20, 2012 19:47
-
LINKS on the different types of recoveries and disaster recovery
Hello
Can someone please give me the links on different types of recovery scenarios. And what is meant by disaster recovery and how to survive in the event of any disaster recovery and types of disaster recovery.
Please help me gurus.
Thank you and best regards,
Poorna Prasad.Useful link.
http://www.morganslibrary.com/reference/rman_demos.html
http://download.Oracle.com/docs/CD/B19306_01/backup.102/b14191/recoscen.htm#BRADV229
I hope this helps.
Concerning
Asif Kabir -
Hi all
I worked at different scenarios for customers supported the migration of material.
I found "Disaster recovery (replace the user's machine)" will perform the same action as the 'migration Hardware' option Assistant in common.
Please let me know if the two are same with operations or any difference is there?
Essentially, they do the same for the different use cases. The only difference is the default option selected for the computer name in the wizard. Migration of HW, it is 'Set Name'. In the Assistant of Dr., is "to keep the name of CVD.
-
Problem with retention of disaster recovery
Hi everyone - I was wondering if someone has noticed this problem and found a solution... our backups CallManager and unity connection are fill the allotted space on the virtual computer that runs our SFTP server. We have to keep 5 days of backups, but when I go through the files for both, I found some who had returned a year or more. For some reason, he is not aging their properly.
Currently we lack 9.1.2 CUCM and UCxn, but this has happened on our system when we had 8.5/8.6 so...
any ideas?
SJ
Either the SFTP user that the product does not have permissions to delete or someone fiddling around with the files (i.e. try to manually clear some of them) and the product has lost track of what's on the SFTP store. I would recommend focusing on a different server for a backup manual (for example your laptop) in order to have a good backup, and then wipe the record clean. Put the DRS of keeping a backup only and look to ensure that it is able to cleanly clear the backup two, day. If he'll come back smoothly, your retention period to five and tell people to keep their hands off the cookie jar SFTP server.
Please remember useful frequency responses and identify useful or correct answers.
-
Problem with different ASM disaster recovery start - new
Hello together,
I had an old net here about it but now will not solve the problem with the points in the old thread. Here's the old: https://community.oracle.com/thread/3608049?start=0 & tstart = 0
I'm doing a disaster recovery with the 'apex11A' on a new server database, which has an another ASM starts. The old man starts is '+ DGA112_1' and '+ FRA112_1', newcomers are called '+ DATA_QUM169' and '+ FRA_QUM169 '. I changed the settings in the spfile restored by writing in a pfile file and creating the spfile from pfile.
I tried in several ways. First lay the new ASM with RMAN to the course:
run { SET NEWNAME FOR DATABASE TO '+DATA_QUM169'; restore database until LOGSEQ 24286; switch datafile all; switch tempfile all; recover database until LOGSEQ 24286; }
Then I tried it in RMAN by defining the new ASM for each data file:
run { SET NEWNAME FOR DATAFILE 1 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 2 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 3 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 4 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 5 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 6 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 7 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 8 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 9 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 10 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 11 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 12 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 13 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 14 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 15 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 16 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 17 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 18 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 19 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 20 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 21 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 22 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 23 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 24 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 25 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 26 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 27 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 28 TO '+DATA_QUM169'; restore database until LOGSEQ 24286; switch datafile all; switch tempfile all; recover database until LOGSEQ 24286; }
Then I tried the bot in one:
run { SET NEWNAME FOR DATABASE TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 1 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 2 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 3 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 4 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 5 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 6 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 7 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 8 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 9 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 10 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 11 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 12 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 13 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 14 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 15 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 16 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 17 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 18 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 19 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 20 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 21 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 22 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 23 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 24 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 25 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 26 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 27 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 28 TO '+DATA_QUM169'; restore database until LOGSEQ 24286; switch datafile all; switch tempfile all; recover database until LOGSEQ 24286; }
Whenever I get one
Starting restore at 03-FEB-16 using channel ORA_DISK_1 creating datafile file number=1 name=+DATA_QUM169 RMAN-00571: =========================================================== RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS =============== RMAN-00571: =========================================================== RMAN-03002: failure of restore command at 02/03/2016 16:20:41 ORA-01180: can not create datafile 1 ORA-01110: data file 1: '+DGA112_1/apex11a/datafile/system.1423.788355253'
The backuppiece which I bring are correctly defined with
RMAN> catalog backuppiece '/usr/local/oracle/product/11.2.0.4/dbs/m4qt0mnk_1_1', '/usr/local/oracle/product/11.2.0.4/dbs/m3qt0mi2_1_1'; cataloged backup piece backup piece handle=/usr/local/oracle/product/11.2.0.4/dbs/m4qt0mnk_1_1 RECID=3779 STAMP=902851052 cataloged backup piece backup piece handle=/usr/local/oracle/product/11.2.0.4/dbs/m3qt0mi2_1_1 RECID=3780 STAMP=902851052 RMAN> list backup; List of Backup Sets =================== BS Key Size Device Type Elapsed Time Completion Time ------- ---------- ----------- ------------ --------------- 3779 52.61M DISK 00:00:00 03-FEB-16 BP Key: 3779 Status: AVAILABLE Compressed: YES Tag: TAG20160203T145340 Piece Name: /usr/local/oracle/product/11.2.0.4/dbs/m4qt0mnk_1_1 List of Archived Logs in backup set 3779 Thrd Seq Low SCN Low Time Next SCN Next Time ---- ------- ---------- --------- ---------- --------- 1 24285 11073415926066 03-FEB-16 11073416327345 03-FEB-16 1 24286 11073416327345 03-FEB-16 11073416678326 03-FEB-16 BS Key Type LV Size Device Type Elapsed Time Completion Time ------- ---- -- ---------- ----------- ------------ --------------- 3780 Full 813.86M DISK 00:00:00 03-FEB-16 BP Key: 3780 Status: AVAILABLE Compressed: YES Tag: TAG20160203T145042 Piece Name: /usr/local/oracle/product/11.2.0.4/dbs/m3qt0mi2_1_1 List of Datafiles in backup set 3780 File LV Type Ckp SCN Ckp Time Name ---- -- ---- ---------- --------- ---- 1 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/system.1423.788355253 2 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/sysaux.1422.788355259 3 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/undotbs1.1359.788355263 4 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/users.1362.788355273 5 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/apex4.1369.788356305 6 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/apex4_files.1366.788356317 7 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/mms_archiv.1358.788357229 8 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/planwerte.1357.788357243 9 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/btdb_prod.1352.788456613 10 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/mais.1353.788456763 11 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/mms.1354.788456995 12 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/externe_wirk.1355.788457525 13 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/mais2mt.1356.788458151 14 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/btdb_read.1351.788458291 15 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/hwdb2acs.1343.788458329 16 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/hwdb2sccm.1341.788458657 17 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/macmon.1340.788458691 18 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/mais_read.1339.788458725 19 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/mais2srm.266.788458799 20 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/outdating_sap_user.267.788458859 21 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/quickcheck.1338.788458887 22 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/switch.1337.788459139 23 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/veit_r.1333.788459167 24 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/test-btdb.1298.795097725 25 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/apex11dev.986.874230931 26 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/apex11devbt.985.874230963 27 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/hrbew.1083.851007823 28 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/optimadata.1032.865951029
I also tried to put the new ASM SQL:
SQL*Plus: Release 11.2.0.4.0 Production on Wed Feb 3 16:04:05 2016 Copyright (c) 1982, 2013, Oracle. All rights reserved. Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 - 64bit Production With the Partitioning, Automatic Storage Management and OLAP options SYS@apex11A> ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/system.1423.788355253' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/sysaux.1422.788355259' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/undotbs1.1359.788355263' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/users.1362.788355273' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/apex4.1369.788356305' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/system.1423.788355253' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 1 - new file '+DATA_QUM169' not found ORA-01110: data file 1: '+DGA112_1/apex11a/datafile/system.1423.788355253' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form SYS@apex11A> ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/sysaux.1422.788355259' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 2 - new file '+DATA_QUM169' not found ORA-01110: data file 2: '+DGA112_1/apex11a/datafile/sysaux.1422.788355259' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form SYS@apex11A> ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/undotbs1.1359.788355263' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 3 - new file '+DATA_QUM169' not found ORA-01110: data file 3: '+DGA112_1/apex11a/datafile/undotbs1.1359.788355263' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form SYS@apex11A> ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/users.1362.788355273' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 4 - new file '+DATA_QUM169' not found ORA-01110: data file 4: '+DGA112_1/apex11a/datafile/users.1362.788355273' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form SYS@apex11A> ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/apex4.1369.788356305' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 5 - new file '+DATA_QUM169' not found ORA-01110: data file 5: '+DGA112_1/apex11a/datafile/apex4.1369.788356305' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/apex4_files.1366.788356317' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/apex4_files.1366.788356317' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 6 - new file '+DATA_QUM169' not found ORA-01110: data file 6: '+DGA112_1/apex11a/datafile/apex4_files.1366.788356317' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/mms_archiv.1358.788357229' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/mms_archiv.1358.788357229' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 7 - new file '+DATA_QUM169' not found ORA-01110: data file 7: '+DGA112_1/apex11a/datafile/mms_archiv.1358.788357229' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/planwerte.1357.788357243' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/planwerte.1357.788357243' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 8 - new file '+DATA_QUM169' not found ORA-01110: data file 8: '+DGA112_1/apex11a/datafile/planwerte.1357.788357243' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/btdb_prod.1352.788456613' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/btdb_prod.1352.788456613' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 9 - new file '+DATA_QUM169' not found ORA-01110: data file 9: '+DGA112_1/apex11a/datafile/btdb_prod.1352.788456613' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/mais.1353.788456763' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/mais.1353.788456763' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 10 - new file '+DATA_QUM169' not found ORA-01110: data file 10: '+DGA112_1/apex11a/datafile/mais.1353.788456763' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/mms.1354.788456995' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/mms.1354.788456995' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 11 - new file '+DATA_QUM169' not found ORA-01110: data file 11: '+DGA112_1/apex11a/datafile/mms.1354.788456995' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/externe_wirk.1355.788457525' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/externe_wirk.1355.788457525' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 12 - new file '+DATA_QUM169' not found ORA-01110: data file 12: '+DGA112_1/apex11a/datafile/externe_wirk.1355.788457525' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/mais2mt.1356.788458151' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/mais2mt.1356.788458151' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 13 - new file '+DATA_QUM169' not found ORA-01110: data file 13: '+DGA112_1/apex11a/datafile/mais2mt.1356.788458151' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/btdb_read.1351.788458291' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/btdb_read.1351.788458291' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 14 - new file '+DATA_QUM169' not found ORA-01110: data file 14: '+DGA112_1/apex11a/datafile/btdb_read.1351.788458291' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/hwdb2acs.1343.788458329' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/hwdb2acs.1343.788458329' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 15 - new file '+DATA_QUM169' not found ORA-01110: data file 15: '+DGA112_1/apex11a/datafile/hwdb2acs.1343.788458329' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/hwdb2sccm.1341.788458657' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/hwdb2sccm.1341.788458657' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 16 - new file '+DATA_QUM169' not found ORA-01110: data file 16: '+DGA112_1/apex11a/datafile/hwdb2sccm.1341.788458657' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/macmon.1340.788458691' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/macmon.1340.788458691' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 17 - new file '+DATA_QUM169' not found ORA-01110: data file 17: '+DGA112_1/apex11a/datafile/macmon.1340.788458691' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/mais_read.1339.788458725' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/mais_read.1339.788458725' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 18 - new file '+DATA_QUM169' not found ORA-01110: data file 18: '+DGA112_1/apex11a/datafile/mais_read.1339.788458725' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/mais2srm.266.788458799' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/mais2srm.266.788458799' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 19 - new file '+DATA_QUM169' not found ORA-01110: data file 19: '+DGA112_1/apex11a/datafile/mais2srm.266.788458799' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/outdating_sap_user.267.788458859' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/outdating_sap_user.267.788458859' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 20 - new file '+DATA_QUM169' not found ORA-01110: data file 20: '+DGA112_1/apex11a/datafile/outdating_sap_user.267.788458859' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/quickcheck.1338.788458887' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/quickcheck.1338.788458887' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 21 - new file '+DATA_QUM169' not found ORA-01110: data file 21: '+DGA112_1/apex11a/datafile/quickcheck.1338.788458887' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/switch.1337.788459139' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/switch.1337.788459139' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 22 - new file '+DATA_QUM169' not found ORA-01110: data file 22: '+DGA112_1/apex11a/datafile/switch.1337.788459139' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/veit_r.1333.788459167' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/veit_r.1333.788459167' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 23 - new file '+DATA_QUM169' not found ORA-01110: data file 23: '+DGA112_1/apex11a/datafile/veit_r.1333.788459167' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/test-btdb.1298.795097725' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/test-btdb.1298.795097725' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 24 - new file '+DATA_QUM169' not found ORA-01110: data file 24: '+DGA112_1/apex11a/datafile/test-btdb.1298.795097725' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/apex11dev.986.874230931' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/apex11dev.986.874230931' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 25 - new file '+DATA_QUM169' not found ORA-01110: data file 25: '+DGA112_1/apex11a/datafile/apex11dev.986.874230931' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/apex11devbt.985.874230963' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/apex11devbt.985.874230963' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 26 - new file '+DATA_QUM169' not found ORA-01110: data file 26: '+DGA112_1/apex11a/datafile/apex11devbt.985.874230963' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/hrbew.1083.851007823' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/hrbew.1083.851007823' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 27 - new file '+DATA_QUM169' not found ORA-01110: data file 27: '+DGA112_1/apex11a/datafile/hrbew.1083.851007823' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form SYS@apex11A> ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/optimadata.1032.865951029' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/optimadata.1032.865951029' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 28 - new file '+DATA_QUM169' not found ORA-01110: data file 28: '+DGA112_1/apex11a/datafile/optimadata.1032.865951029' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form
But my new database will not set the new ASM and I have no why.
The db_create_file_dest parameter is set correctly, so I think that:
NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ db_create_file_dest string +DATA_QUM169
I forgot something? Would be nice to get help ...
A big thank you and best regards,
David
Your data checkpoint SCN file are in the LOW and HIGH range of the SNA for SEQUENCE 24286.
Therefore, your UNTIL clause should be 24287 SEQUENCE up to THAT.
Hemant K Collette
Maybe you are looking for
-
Do not let Me pass Adobe products at dock
I installed Adobe LightRoom and Photoshop on my Macbook Pro for a reason, I'm trying to move the application icons in the Dock and the other icons on the Dock do not move offer a space either of these programs. All the rest I was able to move to the
-
Migration of Thunderbolt question of TB1, TB2
Transfer system, what the best option? 10.11.3 migration will work with crush 1 (macMini) 2011 to crush 2 (new iMac 27) The Mac Mini will manage the load, it runs hot long do - file transfers Last point, I have an external Firewire 800 drive with the
-
Satellite R10-101: 300 GB USB HDD does "jump up" automatically
Hello I have a Satellite R10 - 101 Tablet PC. I wanted to back up my hard drive by copying an image of my entire hard drive on an external USB hard drive. I got a 300 GB hard drive on a Windows XP SP2 desktop machine, mounted the drive in a USB2 encl
-
Mac Mini with os x Lion, said El Capitan partition Boot Camp Windows 7 has lost
I have a Mid 2011 Mac Mini with os x Lion as my main OS. I had installed Windows 7 to be started using Boot Camp. Everything worked perfectly until I added El Capitan under a new partition. Now, as soon as the boot, there is no option of Boot Cam
-
No notification of new message in Outlook Express
I check the box to let me know the arrival of a new email and with sound howerver, that it does not work only when I go to Outlook Express how can I get this to work? Thank you