Culture to exact size - out of 0.001 inch

Similar Questions

• Out an exact size canvas in PS CS5 for magazine ad?

  Hello

  I started in PS CS5 by creating a canvas 4 x 7 "and started designing.  It does not seem good to me so I decided to print a draft of my partially finished and discovered that it's actually HUGE.  I need to go out an advertisement for a magazine that must be exactly 4 x 7 ".  How do we guarantee that the output size will be exactly as planned?

  Thank you

  Hi, auctioneer

  This should be fairly simple, there is no that many variables.

  Assuming that you want to print at 300 DPI - to simplify the calculations! -which would give you a screen size effective from 2100 high x 1200 pixels in width, assuming that the orientation is portrait.

  This image would not fit on my screen, but it does not matter, then the impression, that would be precisely 4 "x 7".

  Ignore the 'width' of my picture below, I have nothing that fits your exact size, but I hope that the indicated settings are pretty self explanatory.

  

  Good luck!

  Paul

• Defining an exact size in pixels for a rectangular selection area.

  I need to set an exact size to my rectangular selection box. Is there a way to do this? I tried to use the tool of crop as an alternative method, but I find that I could not figure out how to set the culture to the exact size in pixels or how move the selection area cultures when it was placed above the image.

  Thanks in advance...

  Hello

  What version of photoshop are you using?

  Is to use the rectangular selection tool and set the Style to fixed size and then enter the numbers in the width and height fields.

  Alternatively, you can move the selection area by dragging inside the selection if you have the option of the enclosed rectanagular tool set to new selection tool.

  Then Image > crop if you want to crop the image.

  

• Exact size a table takes

  Hello
  
  Can someone show me how to get the EXACT size a table currently occupies.
  
  
  Thank you.

  Heres something I've implemented for a client recently who wanted the object sizes, it breaks down the by object type (tables, indexes, lobtables, lobindexes) and see the percentage against total db size used in the segments... throw a table_name in if you want to limit the search... to remove the commentary on the inscription 'account' below to exclude all smaller then 50 MB

  as noted above, the blocks are different, but its close enough. could get some use out of it.

  define 999 pages
  fixed lines 180
  SELECT
  owner, table_name, round ((sum (bytes) / 1024/1024/1024), 4) Size_GB,.
  round (TRUNC (sum (bytes) / 1024/1024) / total_size_meg * 100, 2) Percentage_of_total_size.
  total_size_meg
  Of
  (SELECT table_name, nom_segment, owner, bytes)
  FROM dba_segments
  WHERE segment_type = 'TABLE '.
  UNION ALL
  SELECT i.table_name, i.owner, s.bytes
  OF dba_indexes i, s dba_segments
  WHERE s.segment_name = i.index_name
  AND s.owner = i.owner
  AND s.segment_type = 'INDEX '.
  UNION ALL
  SELECT l.table_name, l.owner, s.bytes
  OF dba_lobs l, s dba_segments
  WHERE s.segment_name = l.segment_name
  AND s.owner = l.owner
  AND s.segment_type = 'LOBSEGMENT. '
  UNION ALL
  SELECT l.table_name, l.owner, s.bytes
  OF dba_lobs l, s dba_segments
  WHERE s.segment_name = l.index_name
  AND s.owner = l.owner
  AND s.segment_type is 'LOBINDEX'),
  (select sum(bytes/1024/1024) total_size_meg from v$ datafile)
  WHERE
  -table_name like '%%'
  owner not in ('SYS', 'SYSTEM')
  GROUP BY table_name, owner, total_size_meg
  HAVING SUM (bytes) / 1024/1024 > 50 / * Ignore really small tables currently commented out * /.
  ORDER BY OWNER, SUM (bytes) desc

• Do not put files to the exact size

  Hello

  I created Illustrator files to the exact size of InDesign pages I want to place on, so they're just right of pop. But they don't come out the same size. I do the command d for the place and then dragging the cursor with SHIFT pressed from the top left of the page to the bottom right of the page, but it never comes out not evenly.

  No idea what is happening?

  Thank you!

  It is the movement which makes the incorrect size.

  Move your cursor to the upper left corner of the InDesign file, and then click. The file will be placed at 100%.

• Select an exact size of the image to be copied when you use the "Marquee" tool

  How can I select an exact size of the image to be copied when you use the "marquee"?...

  I like to choose a section image of 14.00 x 12,00... When you use the marquee selection tool, you can not control the mouse to select exactly 14.00 12.00 x is always a little higher or lower at 14:00 or 12: 00 am...

  is there a way that you can easily select the exact size of 14,00 x 12,00?...

  Please advise...

  see you soon,

  Hi wong168,

  You can use the fixed size option and enter the size in the input fields using the unit of measure of your choice; That is to say in, px, cm etc.

  If you right click in the entry boxes there are the list of measured values.

  

  

• Can I resize to an exact size in bridge when you export with export Panel?

  I need to create and export JPEGs to an exact size: side lonmgest 5700 pixels. I used to do this, use the command 'fit the picture' in photoshop. However, if I enter the export box 5700 it converts just below, as is a box "worthy of".

  Any ideas? that I'm testing. If this is possible without photoshop then we can encorperate bridge CS5 in our workflow of the enterprise. Thank you

  In addition, you can only Downsample!

• export to.pdf compresses to EXACT SIZE

  Hi all

  Is it possible that I can export my .indd to PDF to an exact size? I need my pricicely 2 MB file and want to compress all that it takes to reach this size but no more then necessary compression.

  Is this possible? or maybe through Distiller?

  Thank you

  Shona

  N °

  Size is a dependent variable on levels of compression and content and is not predictable or something you can set.

• exact size of data in the database and schema

  Hi master,
  
  I always wonder if I could get the exact size of the data in a schema and size exact of a database with the following queries... I will be grateful if someone could tell me what's wrong in the following query, because it shows the different size of the data in the diagram... and any request to find the exact size of my database (not just data files)...
  

  SQL> ed
  Wrote file afiedt.buf
  
    1  select d.owner,sum(u.bytes)/1024/1024 "MB USED"
    2  from dba_segments d,user_segments u
    3  where d.tablespace_name=u.tablespace_name
    4* group by d.owner
  SQL> /
  
  OWNER                             MB USED
  ------------------------------ ----------
  MDSYS                            9484.375
  TSMSYS                              303.5
  DMSYS                               303.5
  OUTLN                                4027
  CTXSYS                            5614.75
  OLAPSYS                         18892.875
  *VD                                503.375*
  SYSTEM                         132100.625
  EXFSYS                            4400.75
  DBSNMP                           1896.875
  ORDSYS                                607
  
  OWNER                             MB USED
  ------------------------------ ----------
  SYSMAN                              57665
  XDB                             57133.875
  SYS                              543965.5
  WMSYS                             8346.25
  
  15 rows selected.
  
  SQL> select sum(bytes)/1024/1024
    2  from dba_segments;
  
  SUM(BYTES)/1024/1024
  --------------------
              1353.875
  
  SQL> select owner,sum(bytes) from dba_segments
    2  group by owner;
  
  OWNER                          SUM(BYTES)
  ------------------------------ ----------
  MDSYS                            34013184
  TSMSYS                             262144
  DMSYS                              262144
  OUTLN                              524288
  VD                              519897088
  CTXSYS                            4849664
  OLAPSYS                          16318464
  SYSTEM                           23265280
  EXFSYS                            3801088
  SCOTT                              393216
  DBSNMP                            1638400
  
  OWNER                          SUM(BYTES)
  ------------------------------ ----------
  ORDSYS                             524288
  SYSMAN                           54067200
  XDB                              50397184
  SYS                             702218240
  WMSYS                             7208960
  
  16 rows selected.

  I would like to know the a daring ijn...
  
  can we get the exact size of the database by querying select sum (bytes) / 1024/1024 "size in MB' from dba_segments;
  ???
  
  I know there are a lot of website that gives the same queries... but I trust oracle forums...
  
  any help will be appreciated...
  
  Thanks and greetings
  VD
  
  Published by: vikrant dixit on April 9, 2009 12:06 AM

  Hello..

  To know the size of the scheme: -.

  select owner,sum(bytes/1024/1024)MB from dba_segments group by owner;
  

  TO know the actual size of the database

  select sum(bytes/1024/1024/1024) Actual_size_gb from dba_segments
  

  HTH
  Anand

• Create an object Style that sets out a framework to an exact size?

  I know I can use a style object to insert the contents of the frame, but what to make a frame one size I need using a style object?

  I am trying to automate my workflow a bit more. I work at a small magazine and we have 7 sizes different options for ads. Our quarter page ads are 3.875 x 5, for example, and I would like to create a style for the pages of quarter which is exactly this size and fits the content to the boot image. We try to create all the ads to the size, but sometimes the deadline, we get ads ready camera through to the last possible moment that are only a fraction off so appropriate to the framework is not a problem, but from now on as long as the frame is 3.875 x 5 for a quarter, 8,625 x 11,125 for full page, etc..

  If a customer changes sizes add us a link to the new announcement in the new spot, and adjust each box manually. It becomes tedious to check every ad and correcting sizes and locations one since we have hundreds of ads per magazine and 3 magazines every month. (we will add more than 3 magazines in a year so I need to get this whipped into shape!)

  Finally, I would like to create a script/scripts to automate my workflow more, but my first step is trying to figure out if I can have a specific image applied with a Style of object size.

  If im going to this topic in the wrong, is there a better way to do it?

  If you have CS5 you can configure the States of the object.

  If you set 1 state object to a size to say the big announcement.

  Then object state 2 to the size of the media

  Object state 3 to be size small

  and so on

  You can then select the State of the necessary object for advertising - and import the ad in this way - and each State of the object may have its own frame mounting Options to automatically scale the image to correct the proportion.

  This should work pretty well - even though I don't him have not completely tested.

• Exact size of brush

  Why isn't the section what I paint the brush size exactly as what shows the cursor?

  For example: when I use a round brush, I see it, but only the heart is what is paint, smearing, cloning, etc.

  I went into preferences and I chose different options under the sliders, but it always not to paint my cursor size chosen.

  You need to right click inside the image and should see something like this: (this is the clone tool)

  

• Put a file while preserving the exact size

  Hello!

  I can't seem to get this right regardless of why I tried:

  I have a file png exported from Blender to the 1024 x 1024 resolution.

  I want to place it in an Illustrator file, keep the size exactly the same thing, do work in Illustrator and export it back to Blender. In this workflow, I need the rest exactly the same size.

  How can I achieve this in Illustrator?

  In case it helps to understand my problem, I also did a short video to illustrate:

  http://www.YouTube.com/watch?v=fO8tD6JFjyY

  Any help would be appreciated! Thank you!

  See here.

  This is the setting of the image size in Photoshop:

  (If you are using pixels per centimeter instead of pixels per inch in Photoshop?

  I've seen people make that mistake.)

  

  And it's the same file placed in Illie. Info says that it's exactly the same size.

  If you do exactly this kind of things you can not go wrong.

  

  Update. I downloaded your "http://img94.imageshack.us/img94/275/testfileb.png" file and it is in 150.012 ppi, not 72 dpi

• How to draw a circle in the exact size

  Hello

  How to draw a circle in Ps CS4 to 202mm exactly?

  I know that the tool Elipise > shift + click - Move (for a selection of perfect circle), but not how to type in an exact diameter - is there a function for this in CS4?

  In fact, I'd rather draw the circle in a vector path, if possible.

  I Illustraor, but no idea how to get the path more to the PS...

  Thanks in advance.

  Yes, using the ellipse defined for traces.

  Where is said of fixed size, just type 202mm in each box.

  

  MTSTUNER

• How can I create a file of exact size

  I was tasked to create an image of the map.  The image includes locations of the city and the County.  The specs say that the police must be Times New Roman 10 points and the image as small as possible.

  I tried to create a new file in photoshop which was 6 "wide, but when I watch with leaders he said that it is 15" to 100%.

  This parameters in the 'new' window will ensure that the file is in fact, 6 "wide?  The file I'm trying to reproduce with the Times New Roman 10 PT font is committed to offer you.

  are you sure that the leaders are not on inches and in centimeters? right + click on the rule to check. Also, image-> Image size, what is the width?

• CS6: Cannot enter the exact size

  CS6 Illustrator doesn't let me enter a number in the height and width fields.  For example, if I create a circle and enter 9mm in each field, it gets resized to something like 8.993.  If I create a square and enter 144 mm x 63 mm, Illustrator happening in 144.005 and 62.999.

  I got the snap off.

  Thank you

  Is 'use the preview limits' on?