Defining an exact size in pixels for a rectangular selection area.

Similar Questions

• What is the size in pixels for HD menus in Encore

  Hey everybody,

  So I'm trying to do my first HD Blu Ray menu in Encore DVD (I'm just passing on the SD DVD). No one knows the size in pixels for the HD menus so yet and any HDTV can correctly interpret? And if you include the size SD it would be great.

  Mike Diaz

  This is the link for help I posted in your other thread.

  See menu 'size.'

  Adobe still * using Photoshop to create menus

• When using adjustment layers, I get the message "adobe could not rasterize because pixels for this layer data are not directly editable" what's the problem?

  When using adjustment layers, I get the message "adobe could not rasterize because pixels for this layer data are not directly editable" what's the problem?

  This happens because there is no mask on adjustment and you have selected the Brush tool. You cannot paint on an adjustment. If the masks are not be created by default when you create the adjustment and you want that they be created, select mask add default option in the context menu of adjustments of the

• tool how can I define culture fixed size in pixels of the cultures

  Hello

  I use PhotoShop output CC 2015.0.0.  Quite often, I export a bitmap (bmp) from another application.  I then open in PhotoShop and trimming to get the size I want, in my current project is 1024 pixels wide by 350 pixels high.  I normally repeat this process several times.  Whenever I open a bitmap newly exported in PhotoShop, my area of culture begins with bigger that I want it, and I have to drag the edges to the size I want.  I wish that I could either to the exact size of type (1) of the area of the cultures I want in pixels or better yet (2) create a crop 'preset' box I can use over and over again with the pixel dimensions I want.

  
  

  I was not able to understand how do either of these things.  In attempting to (1), I chose 'W x H x résolution' and entered my desired width and height, in pixels, but it has not changed my culture area.  In wanting to create a preset, I did manually drag the edges of the acreage for the size I want and then chose "New crop Preset" and he gives a name, but when I change the size of the crop manually, hoping that I can return to my desired culture zone by choosing my preset, it does not either.

  
  

  If someone can tell me if/how I can do what I want, I would appreciate it.

  
  

  Thanks in advance,

  Paul
  
  

  The pixels that disappears when zooming in will soon be corrected in the next update. The other option for something that size would create a form of rectangle to a fixed rate of size, when you get positioned TI ctrl - click on its thumbnail to create selection and harvest.

• Just upgraded to CS3 to CC.  My file sizes when registering for the web (.png) are growing exponentially.  Why?

  I have a small graphic in .psd I want to add a little more attention by adding a line to a part of the text.  After completing the editing and saving as a .png (normal for me), the file size has increased by a factor of ten.  I watched the recording settings and noticed that I had not checked compression.  Saved again, and it was still twice the size, 50 KB compared to the 27 KB.  I then returned to Photoshop CS3 and made the same exact changes, saved the file as a .png and it increased only by 3 KB.  I don't want my web graphics to develop there as much as it will slow down the experience especially on small devices.  What has changed?

  Have you tried file > save for Web and define the metadata None?

  

• How to measure the number of pixels involved in a selected area of a digital photo?

  Hello world. I want to determine the number of pixels in an object that is part of a digital photo. I use cameras to film of ice pieces, breaking with tide glaciers or ice cliffs. I want to know the size of the ice segment that capture my digital photos. I know that the width and height of the cliff of ice in metres already, so I thought that I could convert the equivalent of 1 pixel:? m is really what I want to do. This way, whenever I see a block of ice, breakup, I can pull up the photo, describe the piece, calculate how many pixels to fill the area of ice removed by piece break and convert into zone meters 2 - giving me my order of size. If anyone has any ideas on how to do really, I would appreciate it thanks so much community. I thought Photoshop or Fireworks might help me with this, Ricky

  Check out the view > Journal of measures.

  If you have a selection and press 'Measure of recording', you should get the field among others.

  

  Another possible approach would be to the histogram, but I doubt it would be very convenient.

• exact size of data in the database and schema

  Hi master,
  
  I always wonder if I could get the exact size of the data in a schema and size exact of a database with the following queries... I will be grateful if someone could tell me what's wrong in the following query, because it shows the different size of the data in the diagram... and any request to find the exact size of my database (not just data files)...
  

  SQL> ed
  Wrote file afiedt.buf
  
    1  select d.owner,sum(u.bytes)/1024/1024 "MB USED"
    2  from dba_segments d,user_segments u
    3  where d.tablespace_name=u.tablespace_name
    4* group by d.owner
  SQL> /
  
  OWNER                             MB USED
  ------------------------------ ----------
  MDSYS                            9484.375
  TSMSYS                              303.5
  DMSYS                               303.5
  OUTLN                                4027
  CTXSYS                            5614.75
  OLAPSYS                         18892.875
  *VD                                503.375*
  SYSTEM                         132100.625
  EXFSYS                            4400.75
  DBSNMP                           1896.875
  ORDSYS                                607
  
  OWNER                             MB USED
  ------------------------------ ----------
  SYSMAN                              57665
  XDB                             57133.875
  SYS                              543965.5
  WMSYS                             8346.25
  
  15 rows selected.
  
  SQL> select sum(bytes)/1024/1024
    2  from dba_segments;
  
  SUM(BYTES)/1024/1024
  --------------------
              1353.875
  
  SQL> select owner,sum(bytes) from dba_segments
    2  group by owner;
  
  OWNER                          SUM(BYTES)
  ------------------------------ ----------
  MDSYS                            34013184
  TSMSYS                             262144
  DMSYS                              262144
  OUTLN                              524288
  VD                              519897088
  CTXSYS                            4849664
  OLAPSYS                          16318464
  SYSTEM                           23265280
  EXFSYS                            3801088
  SCOTT                              393216
  DBSNMP                            1638400
  
  OWNER                          SUM(BYTES)
  ------------------------------ ----------
  ORDSYS                             524288
  SYSMAN                           54067200
  XDB                              50397184
  SYS                             702218240
  WMSYS                             7208960
  
  16 rows selected.

  I would like to know the a daring ijn...
  
  can we get the exact size of the database by querying select sum (bytes) / 1024/1024 "size in MB' from dba_segments;
  ???
  
  I know there are a lot of website that gives the same queries... but I trust oracle forums...
  
  any help will be appreciated...
  
  Thanks and greetings
  VD
  
  Published by: vikrant dixit on April 9, 2009 12:06 AM

  Hello..

  To know the size of the scheme: -.

  select owner,sum(bytes/1024/1024)MB from dba_segments group by owner;
  

  TO know the actual size of the database

  select sum(bytes/1024/1024/1024) Actual_size_gb from dba_segments
  

  HTH
  Anand

• Out an exact size canvas in PS CS5 for magazine ad?

  Hello

  I started in PS CS5 by creating a canvas 4 x 7 "and started designing.  It does not seem good to me so I decided to print a draft of my partially finished and discovered that it's actually HUGE.  I need to go out an advertisement for a magazine that must be exactly 4 x 7 ".  How do we guarantee that the output size will be exactly as planned?

  Thank you

  Hi, auctioneer

  This should be fairly simple, there is no that many variables.

  Assuming that you want to print at 300 DPI - to simplify the calculations! -which would give you a screen size effective from 2100 high x 1200 pixels in width, assuming that the orientation is portrait.

  This image would not fit on my screen, but it does not matter, then the impression, that would be precisely 4 "x 7".

  Ignore the 'width' of my picture below, I have nothing that fits your exact size, but I hope that the indicated settings are pretty self explanatory.

  

  Good luck!

  Paul

• Size in pixels is disabled for the canvas settings

  Hello. I'm not a total novice, web site design, but I'm pretty new to the specifics within Photoshop. I have recently downloaded a free trial of Adobe Photoshop CC 2015 and use it for a Web Skillcrush Designer course. I noticed that when I went to try the first project, the pixel sizing/scaling was turned off. I put my preferences to display units and leaders in pixels and went to create a canvas of 700px x 700px. However, even if my scale is set to 100%, size in pixels is certainly much smaller than it should be. I double and triple checked my settings, but I think that I can't do something good. I have redownloaded the program and it still does the same thing.

  
  Here are some screenshots of my settings:

  

  

  

  This scale seems just totally turned off, but I see nothing else to do. I also tried to open a file of 700 x 700 and it displayed at this size as well.

  Help, please! I would like to use Photoshop (and will need to complete this course), but am unable to go forward at this time. Thanks a lot for your time and help!

  I know on my MBP retina an image at 200% on my screen, it's what others consider to be actual size.  I'm sure it's far from being a scientific comparison, but that generally seems to apply when I'm not working in PS.

• Culture to exact size - out of 0.001 inch

  Hi-

  I'm trying to do pictures for a scientific publication that requires that they be 3.5x2 inches exactly.  When I get to that size, I find myself with images that are 3.5 x 1,999 inches.  I don't know if le.001 thumb is important for the editor, but is there a way to get around this?

  Thanks in advance

  Post edited by: Nancy Everds (typo in the original message)

  Yes, it's probably your problem: 304 ppi. Change to 300 ppi and 3.5 "x 2". It should work as 3.5 "x 2" translates in 1050 x 600 pixels

  Edit: Wait, you try to get 3.5 "x 2" or 3 "x2.5"? " Anyway would a whole number of pixels in each direction I guess (at 300 dpi)

• Problem with the new sizes of icons for iOS 7 while that submitted to App Store

  Hello

  I have compiled my AIR application that includes the new sizes of icons for iOS 7 (76 x 76, 120 x 120, 152 x 152 and the Spotlight search result 40 x 40 and 80 x 80 icons) from the command-line using AIR 3.9. Here is the section of the icon of my XML application descriptor:

  <>icon

  < image29x29 > icons/icon29x29.png < / image29x29 >

  < image48x48 > icons/icon48x48.png < / image48x48 >

  < image57x57 > icons/icon57x57.png < / image57x57 >

  < image72x72 > icons/icon72x72.png < / image72x72 >

  < image114x114 > icons/icon114x114.png < / image114x114 >

  < image512x512 > icons/icon512x512.png < / image512x512 >

  < image58x58 > icons/icon58x58.png < / image58x58 >

  < image144x144 > icons/icon144x144.png < / image144x144 >

  <!-icons additional app for iOS - 7 >

  < image40x40 > icons/icon40x40.png < / image40x40 >

  < image76x76 > icons/icon76x76.png < / image76x76 >

  < image80x80 > icons/icon80x80.png < / image80x80 >

  < image120x120 > icons/icon120x120.png < / image120x120 >

  < image152x152 > icons/icon152x152.png < / image152x152 >

  < / icon >

  App (.) IPA) is installed and works very well in all the all devices (Ipad, IPhone). While submiting the same application to Apple's App Store with app store available profile, I received three warnings. Those are the following:

  (1) ITMS-9000 WARNING: 'Missing recommended file icon. The package does not contain an icon of the app for iPhone / iPod Touch exactly 120' x 120' pixels, in .png format. "to SoftwareAssets/SoftwareAsset (MZItmspSoftwareAssetPackage).

  (2) WARNING-ITMS-9000: 'Missing recommended file icon. The package does not contain an icon of the app for iPhone / iPod Touch exactly 76 "x 76" pixels, in .png format. "to SoftwareAssets/SoftwareAsset (MZItmspSoftwareAssetPackage).

  (3) ITMS-9000 WARNING: 'Missing recommended file icon. The package does not contain an icon of the app for iPhone / iPod Touch exactly ' 152 x 152' pixels, in .png format. "to SoftwareAssets/SoftwareAsset (MZItmspSoftwareAssetPackage).

  Can someone help me?

  3.9.0.960, who was transferred recently.

  -Pahup

• Exact size a table takes

  Hello
  
  Can someone show me how to get the EXACT size a table currently occupies.
  
  
  Thank you.

  Heres something I've implemented for a client recently who wanted the object sizes, it breaks down the by object type (tables, indexes, lobtables, lobindexes) and see the percentage against total db size used in the segments... throw a table_name in if you want to limit the search... to remove the commentary on the inscription 'account' below to exclude all smaller then 50 MB

  as noted above, the blocks are different, but its close enough. could get some use out of it.

  define 999 pages
  fixed lines 180
  SELECT
  owner, table_name, round ((sum (bytes) / 1024/1024/1024), 4) Size_GB,.
  round (TRUNC (sum (bytes) / 1024/1024) / total_size_meg * 100, 2) Percentage_of_total_size.
  total_size_meg
  Of
  (SELECT table_name, nom_segment, owner, bytes)
  FROM dba_segments
  WHERE segment_type = 'TABLE '.
  UNION ALL
  SELECT i.table_name, i.owner, s.bytes
  OF dba_indexes i, s dba_segments
  WHERE s.segment_name = i.index_name
  AND s.owner = i.owner
  AND s.segment_type = 'INDEX '.
  UNION ALL
  SELECT l.table_name, l.owner, s.bytes
  OF dba_lobs l, s dba_segments
  WHERE s.segment_name = l.segment_name
  AND s.owner = l.owner
  AND s.segment_type = 'LOBSEGMENT. '
  UNION ALL
  SELECT l.table_name, l.owner, s.bytes
  OF dba_lobs l, s dba_segments
  WHERE s.segment_name = l.index_name
  AND s.owner = l.owner
  AND s.segment_type is 'LOBINDEX'),
  (select sum(bytes/1024/1024) total_size_meg from v$ datafile)
  WHERE
  -table_name like '%%'
  owner not in ('SYS', 'SYSTEM')
  GROUP BY table_name, owner, total_size_meg
  HAVING SUM (bytes) / 1024/1024 > 50 / * Ignore really small tables currently commented out * /.
  ORDER BY OWNER, SUM (bytes) desc

• Read the size in pixels of the camera

  Hello

  is it possible to read the size in pixels of a digital camera by programming with IMAQdx?

  e.g. Basler acA1300-30um ace:

  Horizontal/vertical pixel size

  3.75 x 3.75 µm µm

  Thanks in advance.

  Thomas

  Hi Thomas,

  If the seller has exposed this information as an attribute via their XML file is the only way to see that by programming. I looked at a few aces Basler I, and none of them seemed to have this information. They have an attribute called PixelSize, but refers to the bits per pixel and not the physical size. I skimmed the GenICam Standard characteristic Naming Convention to see if there is a feature of GenICam standard for what you are looking for and have not seen one. Unfortunately, it seems that you will not be able to get this information programmatically.

  Katie

• Screen size icon / lost for internet exp at the top.

  programs and windowshave missed one of large size. Broad for effective use. Lost icon for internet exp at the top.

  programs and windowshave missed one of large size. Broad for effective use. Lost icon for internet exp at the top.

  Assuming you are using Vista:

  RE: screen size
  3 tips...

  1. right click on a free space of the office > view > select Classic icons.

  2. set DPI:
  Right-click on a free space of the desktop > customize > column to the left, adjust the size of police (in PPP) > uac prompt > click default scale (96 DPI).

  3 resolution:
  Right-click on a free space of the desktop > personalize > Display Setings > move the cursor to the right. Consult your user manual, see if it tells you what = olution resi is for your computer. My laptop is using 1280 x 800 pixels.

  RE: lost IE icon

  This tutorial shows you how to restore THE REAL (not the shortcut) icon on your desktop:
  http://www.howtogeek.com/HOWTO/Windows-Vista/add-Internet-Explorer-icon-to-Windows-Vista-desktop/

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Why pictures matter the size in pixels wrong?

  I have an image which is 700px, and when I import it comes to 160px to 100%? I have to jump up to about 300% so he could adapt my page layout? I triple check the size of pixels in Photoshop. InDesign give me rabies!

  If you design for screen and that you don't want your images scale when you place them, save them to 72 dpi.