Current information on site for artist Rep area?

Similar Questions

• How to use transfer windows for xp to xp. When I plug usb computers are delivered to the top with the same screen and when I try to use the transfer to the new computer, it just said information gathering and sits for hours

  How to use transfer windows for xp to xp.  When I plug usb computers are delivered to the top with the same screen and when I try to use the transfer to the new computer, it just said information gathering and sits for hours

  Hello, welcome.

  The process is automatic and the maximum transfer rate should be about 20 GB/HR. If the process crashes during that long of a time, it's probably because of something internal rather something you're doing wrong.
  For reference purposes, I included this link. It goes into the details of the migration from XP to Vista (and the basic steps you follow). The instructions are for migrating to Vista via the network, but you can easily follow the steps and choose a different option for your specific installation.
  http://www.windowsnetworking.com/articles_tutorials/migrating-Vista-using-Windows-easy-transfer.html
  For both machines, I recommend you to prepare for the transfer using the following procedure:
  1. click on START > run

  2 type "msconfig" (without the quotes) and press enter

  3. go to the "Startup" tab and uncheck all the entries displayed

  4. click on 'Apply' at the bottom right

  DO NOT RESTART YOUR COMPUTER AGAIN

  5. click on START > run

  6. Type "cmd" (without the quotes). Right-click on the result at the top of the menu START and select 'run as administrator '.

  7. type chkdsk /r and press enter

  8 allow the system to attempt disassembly of the volume

  9. allow the system to plan restarting

  10. restart your computer

  11 let checkdisk analyze the file system on your hard drive

  12. Once completed, perform the same steps on the other machine

  13. Once completed, repeat the transfer

  
  Let us know what happens

  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Where are the best sites for high-level and how information to do different things in Oracle?

  
  Hello

  Where are the best sites for high-level and how information about various things in Oracle?

  Some examples of things:

  * spa

  * spm

  * db replay

  * Resource Manager

  I need a place high-level

  and also a place of step by step.

  For example, I look at these sites:

  www.Oracle-base.com

  www.psoug.org

  Thank you Roger

  Part of the problem is not so much finding sites that have articles on Oracle, that is to find reliable websites with this information.  When I search my site of certification for resources, I find a significant number of people who have 'technical' Articles on Oracle. However, many of these blog posts have simply no useful information.  It is not even that they are wrong so far as article does not include anything that is not declared more clearly and in detail in the documentation.

  That said, a site you have not mentioned above is the Oracle Learning Library.  There very often an excellent material that is very closely linked to the themes of the certification:

  https://apexapps.Oracle.com/pls/Apex/f?p=44785:1:0

• When I open certain websites, my Bank, for example, there are links to other sites, my example cancelled cheques. only when I click on them do nothing

  Problems with links to other sites

  When I open certain websites, my Bank, for example, there are links to other sites, my example cancelled cheques. When I click on them don't do anything and they used to make appear a print version of my cancelled checks of suggestions.

  Hello

  1. have you made changes on the computer before this problem?

  2. what web browser do you use?

  3. what version of Internet Explorer is installed on your computer? (If you use Internet Explorer)

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run the fixit from Microsoft Fixit article and if that helps.

  Improve performance and security in Internet Explorer:

  http://support.Microsoft.com/mats/ie_performance_and_safety/

  Method 2:

  Try the steps in the following Microsoft article and check if it helps.

  You cannot connect to or connect to secure Web sites in Internet Explorer:

  http://support.Microsoft.com/kb/813444

  You cannot view a secure in Internet Explorer 8 Web site:

  http://support.Microsoft.com/kb/968089

  Warning: him reset Internet Explorer settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Hope the information is useful.

• "This action is only valid for products that are currently installed.

  A computer virus hit the machine so that the operating system must be reinstalled. In order to save the programs installed, I don't have a format and reapplied just windows + service pack. I saved the data user as shown in this link: http://pcworld.about.com/gi/dynamic/offsite.htm?site=http :// www.pcworld.com/howto/article/1, aid, 111652, pg, 4, 00.asp

  The office and programs are correct, but when I go to launch some programs (such as Excel, Word, WordPerfect), I get "this action is only valid for products that are current installed. I found a MS fix, but it doesn't install it stating that the level of the OS already contains the fix. I also found a pointer to move to the word 'Detect and repair' but Word does not start, so I can't have this option.

  I suspect I am missing some link between the old installation of windows and the new facility. I do not have the older Office CD so I can't reinstall. Did someone knows something I can check to try to get the Office to acknowledge that it is valid for this user. Betsy

  You are missing a lot of the associations. You need to reinstall your programs from the CD or the installable executables. I'm sorry that you do not have your Office CD-ROM, but you cannot reinstall Office without it. You can:

  1. try to contact Microsoft:
  How to replace lost, broken, or Missing Microsoft Software or Hardware - http://support.microsoft.com/default.aspx?scid=KB;en-us;326246

  2. buy a current version of Microsoft Office to your shop online/brick & mortar favorite.

  3. download/install the suite free OpenOffice to http://www.openoffice.org . MS - MVP - Elephant Boy computers - don't panic!

• On my iPod Nano 7th generation, there are some artists who are not listed, although their songs are on the iPod. For example, I have two Blue Oyster Cult songs on the iPod and they show, but Blue Oyster Cult is not listed under "artists".

  On my iPod nano, 7th generation, there are artists who are not in the list of "artists". For example, I have two Blue Oyster Cult songs appearing under "Songs", but Blue Oyster Cult is not indicated under "artists". Is it possible to have the COB and other artists who do not appear to show up under the "artists"?

  See Missing artist or Album not with others by the same artist.

  TT2

• For some reason any my iphone 6 has suddenly stopped to reduce emails, they are just sitting in the waiting area, I'm running on iOS 9.3.1 can anyone help.

  For some reason any my iphone 6 has suddenly stopped to reduce emails, they are just sitting in the waiting area, I'm running on iOS 9.3.1 can anyone help.

  Hello. Try a few troubleshooting steps here: get help with Mail on iPhone, iPad and iPod touch - Apple Support

• uninstalled Java, try t re-in-stall, cannot because of "this action is only valid for products that are currently installed Windows 7.

  Having Windows 7 Service Pack 1.  Had to uninstall Java/Pogo games but when you try to reinstall Java a window pops up saying, "this action is only valid for products that are currently installed.

  I used Revo UN-install, but when I checked the Panel he showed Java with a folder instead of the Java icon.  I tried to find what file or folder, it is the case, find nothing.  Please help if you can.

  Thank you.

  This sounds like your problem? - http://forums.whatthetech.com/index.php?showtopic=104537&hl=This+action+only+valid+products+that+currently+installed+Windows

  It lists the reg keys his looking, then you might check to see if you put them before doing anything.

  Back up your registry and set a restore point before taking any action - assuming that is your problem.

  Also, if you download and run the file, AV check it before running it - just in case.

  NOTE: the above was found by google, I have not tried that I have not had the error. I can't say if it works or not.

  
  

  PS - Also, FYI, while the research I found this http://support.microsoft.com/kb/893048 , but it seems specific to XP - SP2. Don't know if there is an equivalent W7.
  

• The drivers for this device are not installed. (Code 28) __This device is not present, is not working properly or is not all its drivers installed. (Code 24)

  I HAV these two errors in my drivers and windows cannot update, can any body healp me?

  Hello

  What devices are - if you can not tell what is the name, then you can specify the category of
  Device Manager - or both?

  --------------------------------------------------------------------------------------------------------------------

  This device is not present, is not working properly or is not all its drivers installed. (Code 24)

  The device doesn't seem to be present. The problem may be a faulty hardware or a new driver might be needed.

  Devices to stay in this State if they have been prepared for removal. After you remove the device, this error disappears.

  On theGeneral properties of the device tab, clicktroubleshoot to start the Troubleshooting Wizard.
  ---------------------------------------------------------------------------------------------------------------------
  The drivers for this device are not installed. (Code 28)

  To install the drivers for this device, clickset to update driver, which starts the Hardware Update Wizard.

  ==================================================================

  Those who might be ghosts then right click on them and UNINSTALL - devices and then RESTART.

  References to Vista also apply to Windows 7.
  
  If they show upward then try to manually install the drivers.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Gadgets on my computer - current information is not available.

  Original title: Gadgets on my computer

  A friend and colleague prior moved to Florida and we love to compare and discuss the variables at the time, during or after events such as tornadoes and severe thunderstorms. so, I got my time put in place for its region and my region.  Now, the gadget on my desktop box only shows that the current information is not available.  When I try to open the icon and reset a location, EVERYTHING WON'T WORK, and it does not matter what you're trying... The site is empty or has me locked.  Why?  Is this something I have to repeatedly order or update?  It's frustrating.

  Unfortunately the gadgets are no longer supported:

  http://Windows.Microsoft.com/en-us/Windows/Gadgets

  You can try to look for third-party Apps that displays the weather. For example, you try to install Bing desktop:

  http://www.bing.com/explore/desktop

• configuration for iTunes data are corrupted

  I tried to update iTunes for several months without success.  I also tried to uninstall it and all its components, but when I try to uninstall the iTunes file, I get a message saying that the configuration data for this product are damaged.  Any suggestions?

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Windows Update driver Fresco Logic USB Hub rot caused the pilot to read device status: the drivers for this device are not installed. (Code 28).

  Windows Update driver Fresco Logic USB Hub rot caused the pilot to read device status: the drivers for this device are not installed. (Code 28). The Roll Back button is not active. Where can I get the previous driver that came with my system. ASUS N53S Windows 7. Thank you very much.

  Hello

  Thanks for posting in the Microsoft Community.

  I understand your annoyance that you cannot update the driver hub USB rot. Please follow the steps below to help you to solve the problem.

  I would like to inform you that a Code 28 error is caused by a driver missing for that piece of hardware.

  There are all sorts of reasons that a driver could not be installed for a device, but your troubleshooting the problem will be the same regardless of the root cause.

  • Remove or reconfigure newly installed unit.
  • Restore the version before your driver update.
  • Use system restore to undo recent changes in Device Manager.

  Step 1: Roll back the driver to the version before your update.

  If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. Check out the link below to make back the driver:

  http://Windows.Microsoft.com/en-in/Windows/restore-driver-previous-version#1TC=Windows-7

  When Windows 7 starts up again, it will load with the device driver of this material that you had previously installed.

  I suggest you to uninstall the driver from hub to rot Fresco Logic USB Device Manager and install the most recent on the manufacturer's Web site.

  Tips for solving common driver problems:

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

   

   

  Hope this information is useful. Feel free to get back to us for further questions or problems related to the Windows operating system.

  Thank you.

• Error on game controller wireless for My Logitch F710 Xinput mode "the drivers for this device are not installed (Code 28)". "

  Original title: driver for Windows game controller problem

  My Logitch wireless gamepad F710 does not work laptop with my HP Pavilion dv6-6017tx PC Xinput mode (Windows 7 Home Premium 64-bit). But it works very well in mode Dinput. When I have this device in windows in Xinput mode displays an error in the window of the driver in detail which 'the drivers for this device are not installed (Code 28)'. I uninstalled and reinstalled the driver of Logitech software, but the problem is still there.

  I tested this device to a desktop PC (Windows 7 Professional 32-bit), but this PC detects F710 controller using Xinput, working absolutely as planned without any installed driver software, provided by Logitech. In the details of driver in the PC window, it shows that his taking the pilot as "XBOX 360 Controller for Windows" and the driver file is xnacc.sys in system32 folder and when I searched my system32 laptop dv6 folder I found this file is missing and I n, t know why.
  I also tried to control windows search for drivers online, but windows has failed to find it.
  So what should I do now?
  Help, please!

  Thank you very much for the reply.

  I thought about it finally.
  I installed the driver for the controller XBOX 360 for Windows on microsoft's site and installed. Then plugged the device and select the driver manually installation option and wanted Xbox 360 controller for windows driver in the list. Now my controller F710 currently also works well in mode Xinput and Dinput.
  Thank you very much.

• Hello I am downloading from my site and my characters are messy. I type an e (taken glyphs-window), but what appears is an and the copyright sign? can someone tell me how I get rid off this

  Hello I am downloading from my site and my characters are messy. I type an e (taken glyphs-window), but what appears is an and the copyright sign? can someone tell me how I get rid off this?

  I tried a lot of things, but nothing seems to make a difference.

  In my view, they have already done for you...

  The site seems OK now. Hooray !

  But let's dig down to the serious things of this.

  If the browser needs a statement of character. Probably ' UTF-8 ', but another or an older one would be as well, as long as it's cheap, and it respects the method of characterization of the Web page.

  This statement can be provided by (1) the web server itself (its default value), (2) the htaccess file in your web root directory server, or (3) on each web page. Where there are several and contradictory statements perhaps, the older in the command above rules. But in the case where the Server and the htaccess do not provide a statement of character and your web page later on, it shouldn't be a problem.

  Your provider said that they do not have a such context in their web server, and it wasn't a htaccess file in your root folder (Muse is not create it for you). Once again: do not worry, it should always be no problem, because all your web pages provides the declaration as well (thanks to Muse). We have checked that, no doubt.

  That is where their claim is not accurate. BTW: many tips are on the Internet on the common practice in this area and they all advice that the htaccess is not the place more obvious to the declaration. The page is the best place to put it.

  W3C (the 'boss' of http and html)

  some general information:

  Choosing & applying a character encoding

  putting in a .htaccess file:

  Definition of charset in .htaccess information

  and finally, put on the page:

  Declaring character encodings in HTML

  But what is even more strange: I checked the web server of your provider to access this service online, and it seems that their server is to provide a framework (and it is UTF-8, fortunately). It's the opposite of what they have been say...

  Now I have the idea of some personal provider noticed this morning that their server wasn't working properly (maybe after a failure of server or another incident or failure), serving the pages with a wrong setting. Then maybe they quickly corrected, and not to let you know that, they tell you to put in place this htaccess file (which makes no difference, just as the declaration of your page also could not prevail in the setting of the server).

  So now, you are done with all the three statements: a parameter, a htaccess in your Web site folder and that of your server page. As long as they all say and expect the same (UTF-8) you don't have to worry about this.

  Problem solved, three times!

  PS: many accommodation providers (and I'm afraid that yours as well) tend to declaring that whatever they do is 'standard' and 'obvious'. While in many situations, it's always a little different and certainly not the standard, not to mention obvious...

• I created a site for a restaurant that offers a changing menu everyday.  Need a referral.

  Hello

  I'm creating a Web site for a restaurant which changes their menu every day.  I would like to make a site that makes it as easy as possible for them to change the menu themselves through the edit in browser option.  So far, I have found that the simplest method is to have the client export the menu (from the program they use to make their menu... Microsoft Publisher) as an image, when you log in to Business Catalyst and replace the old image with the new menu.  This works very well for the desktop version of the site, but I'm trying to figure out how to get the change on the mobile menu and versions of the tablet at the same time.

  Is there a way to do this?  Or I go to this trouble?

  Thanks in advance for your comments!

  Andy

  Hi Andy,.

  Currently, there is no way to do it with only one change. But it should be easy enough to do in the browser.

  Not the office as usual. Then navigate to the version of the Tablet (www.yoursite.com/tablet) and do it there and even with the phone version (www.yoursite.com/phone).

  You are hosting with Business Catalyst or third party hosting?