Satellite M30 - continuous beep on startup

Similar Questions

• Equium A200 - continuous beep on startup

  A colleague has spilled water on an A200 Equium and therefore it emits a continuous beep on startup. In fact, you get one beep, immediately followed another. However, if you press F1 it starts OK and all is well. I ran Diagnostics and found nothing wrong.
  The only problem is that one or two of the keys work fine if you lightly touch them.

  Someone has ideas about resetting the sound signal, or what I could do? Thank you.

  Andy

  Hey,.

  I think that it s is not easy to say why this is happening but maybe the water has damaged the keyboard and there so always will be in a hurry I don t he know exactly.

  I think that it is not so useful for you if we discuss it here without test and we don t have made real for your laptop should be checked by a technician of the laptop. Guys can make a detailed diagnosis and order spare parts.

  On the Toshiba site, you can find a list of good luck of suppliers registered!
  :)

• Satellite Pro A200: A continuous beep on startup top and freezing

  Hello

  It comes to Varun of India. Could someone please help me solve a problem which has been haunting me the last two days. This problem is currently arising in my Pro A200 satellilte. Actually, the problem is that one continuous beep sound from internal speaker at startup is when the name TOSHIBA appers at boot time and more it freezes it right of this screen. But, I still somehow using my system by pressing F5 or F9, and then let it start manually in NORMAL MODE.

  But, I can't keep doing this all the time. And what is more, this beep blows continuously only when the system is started and it will hang up within the same screen until I press F5 or F9. I did restore my system but no use. Could someone please help me in this.

  Sincerely, waiting for the answer...

  Verhoeven...

  Hello

  To be honest, it's very strange question. What is some external device connected to your laptop?
  Have you tried to update the BIOS to the latest version?

  Sorry, but I think that in this case, there is not a lot, you can do it. Perhaps the BIOS update, clean install of the OS. All that s.
  Maybe you should contact the closest service and ask what it can be.

• Continuous beep on startup that goes once connected - Satellite 3000

  I just brought a satellite laptop computer opportunity 3000-214, which worked well on the first departure to the top, but I turned it off then decided to turn right back on and now it makes a nosie continuous beep until windows load then stops. The machine then works perfectly since then. Any ideas.

  [Edited by: admin on 5 February 06 12:45]

  Hello

  You said that the unit stops Windows load. Is the unit freezes or stops?
  Have you checked the battery status? Try to remove the battery and after a few minutes trying to plug it in again. Try to start the device again.
  If this doesn't help the Toshiba service should check the laptop.

• Satellite L350-12N - beeps during startup

  Hello

  I bought this as a refurbished laptop, and I have a problem getting it to start. When turned on, it says welcome to Toshiba screen where you can press the function keys to access the configuration screens, then the screen goes black, makes a continuous beep sound and goes no further. It loads the operating system.

  I tried to restore the operating system to the hard drive as described in the manual, but still the same fault. Is this a known indicator of a hardware or software failure?

  Any help or advice would be appreciated!

  Hello

  To be honest, I still don t understand what you exactly. Do you use F8 at the beginning upward to enter advanced startup options or what?

  You have created recovery DVD such as recommended by the reminder of Toshiba? If so, you can try installing the OS using this recovery media.

  In any case, enter the BIOS at startup settings upward and set it to default settings. HARD drive is recognized correctly in the BIOS settings?

  At the end I have to say that it is not easy to say what the problem is here. If please check out what several things and let us know if the HARD drive is recognized correctly, or what will happen if you try to install the OS by using initial recovery media.

• Some keys don't work no and Satellite M30 - 10 beeps

  Hello

  I have a weird problem on my Satellite M30-10seven.

  When I press some letter keys on the keyboard, that they do not work and the laptop will beep.

  It started with miuj updown seven point eight right has failed.
  But now I did and by commas and down and 8 make too as well as right.

  I also choose the Boot option to the power upward I never had before and sometimes internet explore trying to full screen.

  Probably not a key is pressed? Because as I said affect only some keys.

  Since writing this j stopped again.

  Any ideas?

  Try an external keyboard and see if that fixes the problem. If so, your keyboard needs to be replaced. If this is not the case, the keyboard on the motherboard controller has gone bad and you need a new motherboard. Also, try to download the update to the BIOS and see if that fixes the problem. Good luck.

• Computer continuously beeps at startup but is not on (Compaq Mini CQ10-500)

  Hello, if I was about to do a factory restore on my computer later in the day, but I was unlucky that the computer has stopped working when I turn on it beeps continuously and won't turn on, I chose the option "Start windows normally" and even the possibility that files (to fix the problem don't not let me start) controls/Diagnostics , but when he says "loading files" it begins to beep again and the process stops.

  Someone please help me with this?

  I also read that he "might" be a problem with the RAM, but maybe it was for a different problem or if, but if it's a problem with the RAM, so how can I solve this problem?

  Hello Cosmic_Wolf,

  I understand your beeps at startup.

  You can try reinstalling the RAM.

  Remove the ram and then reinsert it.

  Also do a hard reset.
  Turn off the computer.
  Remove the power cable and battery.
  Hold down the power button for 15 sec while booth energy sources are deleted.

  This should reset the hardware in the computer.

  That you put it on press the F10 key. This will load the BIOS setup utility.
  Press F9 to load the default values.
  Press F10 to save and exit.

  When the computer starts up, check if everything is working.

  I would like to know how everything goes.

• continuous beep on startup and the black command screen

  I have problems with the boot on my computer laptop gateway. I bought it last year, and despite the update anti spyware and etc., he refuses to start after a black screen.it command refuses to go into hibernation mode is that drives me crazy. When I try to put it in this mode the red light that usually indicates the hibernation mode flashes 3 times faster and when I open the screen it displays the screen of welcome without a moments notice. is this just a virus? or is it something else. I don't have the keys sticky and I clean them every week and ran the antivirus program several times a week since I bought it.

  Hello

  Sound beeps are error codes that describe a problem with your machine. A continuous beep
  can mean keyboard (loose or bad cable), losing the card, power, a short circuit or other matter according to the
  System/BIOS manufacturer.

  Startup and select CONFIGURATION/SETTINGS (BIOS/CMOS) - usually F2 that you start - look to see BIOS
  Creator, then see here:

  Computer MESSAGE / beep codes
  http://www.computerhope.com/beep.htm

  If my computer beeps and won't start, what do the beeps mean?
  http://KB.IU.edu/data/afzy.html how to troubleshoot Beep Codes
  http://pcsupport.about.com/od/nonworkingcomponent/HT/beepcodestb.htm

  POSTAL Codes beep
  http://www.technick.NET/public/code/cp_dpage.php?aiocp_dp=guide_beep_codes

  Power on Beep Codes post
  http://www.pchell.com/hardware/beepcodes.shtml

  It can be so other check with the manufacturer of the system.

  ----------------------------------------------------------------------------

  Are there any error messages? May be material.

  Check with Support technique Gateway, their documentation and online drivers.

  Gateway drivers and downloads
  http://support.gateway.com/support/drivers/dlcenter.asp

  Technical support Gateway
  http://support.gateway.com/support/?cmpid=topNav

  Door Documents
  http://support.gateway.com/support/SUPINFO/index.asp?cmpid=topNav

  I hope this helps.

• Qosmio G10 - continuous beep on startup

  Hello

  I have a Qosmio G10. It worked well recently again. Now when I start it, I hear a continuous beep. There is also no image on the screen.

  Can anyone help?

  Thank you very much

  Martin

  Hello

  I agree with dfj if you didn t Exchange some hardware components or even added a new one, there must be a hardware problem and you should contact technicians.

  Good bye

• Acer Aspire V3-571, a continuous beep on startup

  Hello

  I have an acer aspire v3 - 571 that keep a beep on startup. I can get into Windows 7 by pressing "ESC".

  However, after I enter Windows and use my browser (mozilla firefox), the Web page is scrolled automatically at the end of the page. Despite manually by pressing the scroll bar and bring the scroll bar to the top of the page, just wedpage keep automatic scrolling at the end of the page.

  Initially, I suspect my wireless mouse was defective, but even after changing for wired operation smile, the problem persists.

  Now I am suspecting if the problem is the built-in trackpad or the built-in keyboard key 'END '. Please en; ighten me on what I need to do to solve the problem above.

  If it is a sound signal and go to page END...

  There are many more to check, take a look at your 'End' button, use a cloth with compressed air to clean up a bit.

• Continuous beep on startup to the top and the cursor does not not in HP laptop

  Original title: hp laptop problem

  cursor movments ok but the press function works and the sound beeps is emitted continuously are all in sbooting

  Hi Sumiyav,

  1. Since when are you facing the issue?

  2. are also deal with any other performance issues with the laptop?

  3. What is the number of the model of the laptop?

  4. do you have a security program installed on the computer?

  5 did you a recent software or changes to the material on the computer?

  Provide us with more information so that we are able to help you the best.

  You can also view the article from HP:

  Resolve startup issues (Windows XP, Me and 98)

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=bph07173&cc=us&DLC=en&LC=en&product=57628

  Alternatively, you can contact HP for known problems:

  Contact HP / Customer Service

  http://WWW8.HP.com/us/en/contact-HP/contact.html

• continuous beep on startup top and dysfunction following press set to date. __

  I have a Vaio FE41E with Vista Home Premium.  2 days ago, that he began to beep continuously start and hang until I pressed F12. Then he would start but the touchpad has become inoperative and it started flashing uncontrolled through menus, drop-down boxes and radio buttons.  After that the hours spent trying to solve, including several restorations system several times, I did a full reboot to factory settings.  All right, including the installation of SP2, but today the problem comes back again once.  It could have been caused by another update.  Does anyone know what update could be the cause of this problem?  Or is it something else?  Thank you very much.

  If you have a sound problem, which is normally a sign of hardware problems.

  http://www.pchell.com/hardware/beepcodes.shtml

  http://www.5starsupport.com/info/beep_codes.htm

  See if the foregoing gives you an overview of your beep problem.

  http://pcsupport.about.com/od/nonworkingcomponent/HT/beepcodestb.htm

  "How To Troubleshoot Codes sound"

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  To diagnose issues of update:

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understand the Extras in Windows Vista and Windows Update info is at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite A200-1O5 - beep at startup

  Hello

  My satellite makes sometimes a few loud beeps when starting the Bios for about half a minute.
  After that, it starts to boot the OS (Vista) without any problem.
  But something must be wrong (because of the beeps).

  What could this be?

  Thank you very much.

  Gerd

  Hello

  If a stuck keyboard key it can cause these beep codes you have spilled something on the keyboard in the past?

  Everything works correctly if Windows has started, or do you have other problems too?

  As already written Akuma I recommend you contact a service provider authorized too. Guys can check your laptop because it is difficult to say what part is affected without exact diagnosis and it is possible that professional people. You can find a list of all FSA here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Good luck! :)

• Re: Satellite A200 - sound beep after startup

  Hello world

  Recently my laptop has started to be malfuntioning.
  Yesterday, after the start (or when you take it out of fashion 'sleep'), it started beeping.

  Beep, it's 10 minutes in a row, fast.

  I run a stock standard Satellite A200 Windows Vista Help.
  I don't know what to do, and over the ringtone (which lasts about 10-15 minutes) I can't do anything - the CPU (I think) simply cannot handle all of the processes. The ringtone comes from the right side of the laptop and is fake, but certainly a sign of a problem.

  I believe it has something to do with the motherboard, but I don't know how to diagnose this problem, and after hours of research I have not found someone with a similar problem to mine.

  I'm sorry if I posted this in the wrong forum, also the advice to confused and I just can't find a support technique one.

  Help, please
  Victor11

  Hello

  If I understand your problem, it seems that you are not able to enter the BIOS and you are not able to boot the operating system Window.
  You don't see that the home screen Toshiba so is good?

  Hmm, it seems that this sound signal is related to a hardware malfunction
  Then maybe the POST (power on self-test) cannot be spent properly and so you get this alert beep

  What to say; in most cases it mother s associated with, but it is difficult to say which could be exactly wrong

  Maybe you can try this;
  Remove the battery and unplug the power adapter for a few hours
  Wait and after a while connect the two parts again
  Then try again to turn the unit

  If this does not work, then I would recommend asking a technician help in ASP.

• Satellite P300-16n - beep on startup error

  Hello

  I have a Toshiba Satellite P300-16n.

  Since a few days ago, it cannot start. In fact, when I press the power button, the screen is already black and I got a beep: one long and two beep short beep.

  I see on many sites that the graphics card is out. I would like to change the graphics card. Is it possible? Where can I buy a new graphics card? How can I disassemble the Toshiba P300?

  Thank you for your help

  nb91

  > I would like to change the graphics card. Is it possible? Where can I buy a new graphics card? How can I disassemble the Toshiba P300?
  Unfortunately it's the worst thing that can happen with laptop. In general the GPU cannot be replaced and when something like this happens all motherboard needs to be replaced.

  You can try to use Google and check if you can find something but it is unclear to me that you can buy a graphics card in some online stores. Maybe on ebay and without warranty.

  All this is quite complicated.

  Just for your info: http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm