current processor load

Similar Questions

• results of math processor load

  We have problems to get the results of math (in this case, the matrix multiplication) which differ based on the processor intel used. We saw the differences between the core 2 duo T7700, Xeon X 5460 with a Pentium 4 Xeon based. The operating system does not make the difference (we tried XP x 32, XP x 64, x 64 Vista and windows 7 x 64).

  See also the source code with an executable here:

  http://www.boschjes.com/LV2009ISSUE

  We have implemented our own matrix multiplication (10 x slower) and it gave the same results on all platform (OS / CPU) combinations.

  Anyone have similar problems? And you saw him around mathematics? As we only studied the function of matrix multiplication.

  These tests were performed using labview 2009, f2. We are still looking at comparison with labview 7.1.1 and labview 8.6.1 tests.

  Someone at - it ideas?

  Oskar

  Hi Oskar,

  LabVIEW 2009 SP1 still uses MKL 10.1 because we find some other problems with 10.2 MKL.  If LabVIEW 2009 SP1 does not resolve it.

  On http://software.intel.com/en-us/intel-mkl, there is an option to evaluate.   You can download the evaluation version of MKL for 30 days usage.

  I have create a revised matrix multiply VI which divides the matrix has submatrices and multiplies B block.

  I hope this might solve your problem.  Could you please test it on your PC Xeon X 5460?

  Best regards
  Michael

• Windows 2012 high R2 of the processor load when file transfer

  Hi all

  Here are the details:
  We have 2012 R2 Standard Windows that is running on the ESX host. There one vCPU.
  When transferring files via gigabit network system interrupts, process uses about 80% of CPU load.
  Maybe someone had a familiar problem?
  Thank you very much.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Processor load of the svchost (Windows Update)

  Hi all

  I have a problem with my new installed Windows 7 (32-bit) PC. A single process (svchost.exe) use 50 to 60% of the CPU load, which leads to a low performance for other programs. After researching, I discovered that this is due to a problem with the update of Windows. When I disable the Windows Update the CPU load went to close to 0%. But unfortunately I won't be able to get updates aynmore.

  I searched the Internet and tried a few ways to fix:

  1: turn off Windows Update--> delete everything in the folder of C:\Windows\SoftwareDistribution--> download activate Windows Update

  This led to a shutdown of the svchost.exe for maybe 5 minutes. Subsequently, everything was as before.

  2: using the Microsoft Fix "WindowsUpdateDiagnostic" that resets the update together.

  No change to the problem above.

  When Windows Update is looking for new updates that he continues to search for hours (and probably more) without finishing. Some people in the Internet said it might be a problem with a special "Windows Update Agent 7.6.7600.320' update. This one is the only one I have in my history of update. What other shots on my eyes, is that whenever I step 1 (above) before svchost take still more CPU load some process called "TrustedInstaller" was shortly at 50% of CPU load. Maybe it's some special update from the Windows Update is blocked on?

  Do you know what I can do?

  -Simon

  I noticed this also on all of my devices.  Of course, there is a Windows Update to fix the Windows Update...

  https://support.Microsoft.com/en-us/KB/3102810

• Missing to get the current font loading of vi

  Please see the attached screen. I can't find the vi.

  Office and report toolkit installed both on this new machine.

  Can someone give it, I use 8.6.

  What version of the Toolbox you trying to install? There has been updates in the past, some of which have been required to be compatible with specific versions of LabVIEW.

  Have you checked to see if the LLB is really? If so, can you open it? I would recommend that you run a "repair" on the installation of the tool box, or try reinstalling it.

• The tiny processor upgrade M93p

  I am considering, for the most part just for fun, upgrading the processor in my tiny M93p Office. According to CPU World, the socket type is a decision 1150 / LGA1150 socket / Socket H3. My M93p currently has a processor Intel Core i5 - 4570T (http://www.cpu-world.com/CPUs/Core_i5/Intel-Core%20i5-4570T.html), 2.9 GHz dual-core. I would like to put a processor quad-core in it, but I am concerned about the risk of increased energy and heat load.

  I'm looking for the following options to upgrade:

  i5 - 4690K (http://www.cpu-world.com/CPUs/Core_i5/Intel-Core%20i5-4690K.html)

  i5 - 4570S (http://www.cpu-world.com/CPUs/Core_i5/Intel-Core%20i5-4570S.html)

  I7 - 4785T (http://www.cpu-world.com/CPUs/Core_i7/Intel-Core%20i7-4785T.html)

  I7 - 4790K (http://www.cpu-world.com/CPUs/Core_i7/Intel-Core%20i7-4790K.html)

  As I said, my major concern is heat load and increased energy consumption. The power of my current processor thermal design (TDP) is 35 watts. The TDP of the CPUs I'm looking at upgrading range from 35 watts (i7 - 4785 lower motor T, not my first choice) to 88 watts. If I go with a TDP of 65 watts or 88 watts, my heat sink will be able to handle the heat load? And the food will be able to handle the additional energy consumption. Any help would be appreciated. Thank you!

  It must be one of the processors is can be ordered with, else the BIOS doesn't recognize and are unable to post (start). Search above for others who have improved their processor.

• ESX Cluster load - wise host...

  Hi all

  I have 2 groups with the ESX hosts.

  Now I need to get the report for each configuration of cluster and cluster has HOSTs.configuration... I want the report as report cluster resource and the cluster HOST... same

  as below

  NOMCLUSTER |  Total space (MB) | Available CPU (Mhz). Total of the CPU (Mhz).   Total physical memory (MB) |   Memroy available (MB)

  ____________________________________________________________________________________________________________

  Thks for LUKE providing report below. , I received this report of our vmware blogs, its rreport even this only for CLUSTERS

  I hope you understand my problem.

  appreciate your help

  Thank you

  ALDOVMWARE

  # Virtual Center Server
  $VCServerName = 'my servername. "
  $creds = get-Credential
  # Some variables
  $portvc = "443".
  $VC = connect-VIServer-Server $VCServerName - Credential $creds - ErrorAction Stop - port $portvc
  $report = @)
  $clusterName = "MonitoringTestCluster".
  $report = foreach (Get-cluster-name $clusterName $cluster) {}
  $esx = $cluster | Get-VMHost
  # $ds = get-Datastore - VMHost $esx | where {$_.} Type - eq "VMFS" - and $_. Extensiondata.Summary.MultipleHostAccess}
  New-object PSObject-property @ {}
  VCname = $cluster. Uid.Split(':@') [1]
  DCname = (Get-Data Center-Cluster $cluster). Name
  NOMCLUSTER = $cluster. Name
  'Number of guests' is $esx. County
  'Total of processors' = ($esx: measure - InputObject {$_.}) Extensiondata.Summary.Hardware.NumCpuPkgs} - sum). Sum
  'Total core' = ($esx: measure - InputObject {$_.}) Extensiondata.Summary.Hardware.NumCpuCores} - sum). Sum
  'Ability to failover current CPU' is $cluster. Extensiondata.Summary.AdmissionControlInfo.CurrentCpuFailoverResourcesPercent
  'Ability to failover of current memory' is $cluster. Extensiondata.Summary.AdmissionControlInfo.CurrentMemoryFailoverResourcesPercent
  "Configured failover ability" = $cluster. Extensiondata.ConfigurationEx.DasConfig.FailoverLevel
  "The level of automation of migration" = $cluster. Extensiondata.ConfigurationEx.DrsConfig.DefaultVmBehavior
  'Recommendations of DRS' = & {$result = $cluster. Extensiondata.Recommendation | %{$_. Reason ;} If ($result) {[string]::Join(',',$result)}}}
  'DRS flaws' = & {$result = $cluster. Extensiondata.drsFault | %{$_. Reason ;} If ($result) {[string]::Join(',',$result)}}}
  'Migration threshold' is $cluster. Extensiondata.ConfigurationEx.DrsConfig.VmotionRate
  'hosts target loading standard deviation' = "NA".
  "Host current care gap" = "NA".
  'Total physical memory (MB)' = ($esx |) Measure-Object-MemoryTotalMB property-sum). Sum
  'Configured MB memory' = ($esx |) Measure-Object-MemoryUsageMB property-sum). Sum
  'Available Memroy (MB)' = ($esx |) Measure-object - InputObject {$_.} MemoryTotalMB - $_. MemoryUsageMB} - sum). Sum
  'Total CPU (Mhz)' = ($esx |) Measure-Object-CpuTotalMhz property-sum). Sum
  'Configured CPU (Mhz)' = ($esx |) Measure-Object-CpuUsageMhz property-sum). Sum
  'Available CPU (Mhz)' = ($esx |) Measure-object - InputObject {$_.} CpuTotalMhz - $_. CpuUsageMhz} - sum). Sum
  'Total of free space (MB)' = ($ds | where {$_.}) Type - eq "VMFS"} | Measure-Object-CapacityMB property-sum). Sum
  'Configured (MB) disk space' = ($ds |) Measure-object - InputObject {$_.} CapacityMB - $_. FreeSpaceMB} - sum). Sum
  'Disk space available (MB)' = ($ds |) Measure-Object-FreeSpaceMB property-sum). Sum
  }
  }
  $report | Export-Csv "Q:\Cluster-Report.csv" - NoTypeInformation - UseCulture

  Try this, it's the closest you can get.

  You cannot combine different objects (files) in a CSV file.

  # Virtual Center Server
  $VCServerName = "my servername" $creds = Get-Credential # Some variables
  $portvc="443" $VC = Connect-VIServer -server $VCServerName -Credential $creds  -ErrorAction Stop -port $portvc$report = @()
  $clusterName = "MonitoringTestCluster"foreach($cluster in Get-Cluster -Name $clusterName){
    foreach($esx in (Get-VMHost -Location $cluster)){
      $report += New-Object PSObject -Property @{
          VCname = $cluster.Uid.Split(':@')[1]
          DCname = (Get-Datacenter -Cluster $cluster).Name        Clustername = $cluster.Name        VMHost = $esx.Name        "Number of hosts" = $esx.Count        "Total Processors" = ($esx | measure -InputObject {$_.Extensiondata.Summary.Hardware.NumCpuPkgs} -Sum).Sum        "Total Cores" = ($esx | measure -InputObject {$_.Extensiondata.Summary.Hardware.NumCpuCores} -Sum).Sum        "Current CPU Failover Capacity" = $cluster.Extensiondata.Summary.AdmissionControlInfo.CurrentCpuFailoverResourcesPercent        "Current Memory Failover Capacity" = $cluster.Extensiondata.Summary.AdmissionControlInfo.CurrentMemoryFailoverResourcesPercent        "Configured Failover Capacity" = $cluster.Extensiondata.ConfigurationEx.DasConfig.FailoverLevel        "Migration Automation Level" = $cluster.Extensiondata.ConfigurationEx.DrsConfig.DefaultVmBehavior        "DRS Recommendations" = &{$result = $cluster.Extensiondata.Recommendation | %{$_.Reason};if($result){[string]::Join(',',$result)}}
          "DRS Faults" = &{$result = $cluster.Extensiondata.drsFault | %{$_.Reason};if($result){[string]::Join(',',$result)}}
          "Migration Threshold" = $cluster.Extensiondata.ConfigurationEx.DrsConfig.VmotionRate        "target hosts load standard deviation" = "NA"        "Current host load standard deviation" = "NA"
          "Total Physical Memory (MB)" = ($esx | Measure-Object -Property MemoryTotalMB -Sum).Sum        "Configured Memory MB" = ($esx | Measure-Object -Property MemoryUsageMB -Sum).Sum        "Available Memroy (MB)" = ($esx | Measure-Object -InputObject {$_.MemoryTotalMB - $_.MemoryUsageMB} -Sum).Sum        "Total CPU (Mhz)" = ($esx | Measure-Object -Property CpuTotalMhz -Sum).Sum        "Configured CPU (Mhz)" = ($esx | Measure-Object -Property CpuUsageMhz -Sum).Sum        "Available CPU (Mhz)" = ($esx | Measure-Object -InputObject {$_.CpuTotalMhz - $_.CpuUsageMhz} -Sum).Sum        "Total Disk Space (MB)" = ($ds | where {$_.Type -eq "VMFS"} | Measure-Object -Property CapacityMB -Sum).Sum        "Configured Disk Space (MB)" = ($ds | Measure-Object -InputObject {$_.CapacityMB - $_.FreeSpaceMB} -Sum).Sum        "Available Disk Space (MB)" = ($ds | Measure-Object -Property FreeSpaceMB -Sum).Sum    }
    }
  }
  $report | Export-Csv "Q:\Cluster-Report.csv" -NoTypeInformation -UseCulture
  

• iPad pro icon load acting strangely.

  Since iOS 10.0.2 was installed when I charge my iPad Pro 9.7 "icon at the top right seems to act differently.

  Before the iOS update when I plugged the cable into the icon would change from the percentage text and a white bar for the battery to a green bar and the prosecution would progress (sometimes the text would update) and move the green bar. When 100% has been reached the green bar would be change in white and below it would say not charging.

  It seems now the green bar works fine, up to 95%. So if the iPad goes into 'sleep', when I wake up it it says NO charging current, but there the text usually is greater than 95%? If I pull the rope and reinsert, the bar turns green, but at some point he indicates NO CURRENT charging or the screen goes black and when awakened it indicates NO CURRENT charging.

  However, once it reaches 100% now STAYS green bar? He turns not white nor the State DO to RECHARGE not?

  I do NOT use a standard charger, but an Insignia desktop charger. This has worked for me for years without problem? Even on this iPad Pro (and an iPAD 2 and 3 in the past).

  Ideas? Code modified to load differently to avoid overheating of the battery? My charger is a failure? Do not recharge the iPad is slower than before?

  Confused...

  Hello. They changed the logic that monitors the loading. As you say, everything works as before. If you use the original charger, that it should behave normally, because it will receive a higher current (faster loading).

• Update Safari last night.  Now the free online games on AARP does not load.  It is not the site, because the macbook pro hubby still loads

  I've updated to the latest version of Safari on my 2015 macbook air.  Since then, the games I play, on the site of the AARP, don't be loading.  I checked to make sure that Flash was updated and it is.  I have also an old iMac that I play on.  I did not update this machine yet.  Currently the load games on that one.  Does anyone else have this problem?

  Which version of OSX?

  What exactly happens when you try to load the sites?

  They load and then disappear?

  Have you tried another browser?

• Only the tab to load once clicked at the opening of the large groups of bookmarks

  I have a folder of bookmarks that contains a few sites I like to visit regularly. When I want to open all of these sites at the same time, I opens the bookmarks folder, scroll to the bottom of the file and click on "Open all in tabs". This opens * and * charge all of the bookmarks contained in this file at the same time.

  I would like to change it then, instead of the opening tabs * and * loading at the same time, they open at the same time but * wait * be clicked before loading.

  The desired behavior can be demonstrated when you restart Firefox with several tabs open, but only the current tab load after reboot, with others waiting in the tab bar to be clicked before loading.

  All advice is appreciated.

  Thank you!

  Technically, you give the browser the command to open several pages at once. I get that you want to make Firefox, but it is currently not possible.

  If you wish, you can use the group your tabs function (http://mzl.la/KrLdDR). In this way, you can just pass grouped tabs display, and then select the tab you want to load individually.

  If Firefox is set to not load the legs up to this that selected, you don't load these tabs in the background. And, you can't have these tabs open in the window at any time.

  Personally, I have seven different groups of handling anywhere between 80 to 130 tabs at any time, so don't load it the tabs until the selected feature really helps me.

  I group of tabs for online shopping, work, social media, YouTube etc.

  I hope this will at least limit the damage for you a bit.

  P.S. I tried to find an add-on to help you with your problem, although I did not find one.

• Is there a firefox command argument to load firefox in 32-bit mode?

  Hello

  I RHEL6.3, I have the 32-bit versions and 64-bit of Firefox (V10.0.7) installed. I need 32 bits for WebEx (Java plugin) and the 64-bit Flash player.
  Currently, I load the 32-bit executable file by running:
  / usr/lib/Firefox/Firefox

  Is there a firefox command argument to load firefox in 32-bit mode?
  for example firefox-32 b

  Thanks in advance,
  Simon

  32-bit and 64-bit versions are different programs and therefore installed in a directory of different programs, so you must start them in their own program directory.
  
  If you want to start them via a command then you must write a script file to define the correct program directory.

  Why don't create you two desktop shortcuts for each of the two versions of Firefox and start them with their own profile?

• Can I upgrade my processor?

  I have a laptop Compaq Presario C700 and I wanted to know if its possible to upgrade my processor.
  
  My current processor is «Intel (r) Pentium (r) Dual CPU T2310 @ 1.46 GHz»

  (Intel (r) Pentium (r) Dual CPU T2310 @ 1.46 GHz)

  I want to switch to a faster (at least 1.70 GHz, but we would prefer 2.00 GHz +), but I don't know if it's okay. I searched a bit and I'm sure that a "Core 2 Duo T8300 @ 2.4 GHz 800 MHz FSB processor" would work, and this is the best that I could find.

  (Core 2 Duo T8300 2.4 GHz 800 MHz FSB Processor)

  They both support the same socket (PGA478 right?) and the same size package.

  So I want to know is can upgrade the processor that I mentioned or a better if possible, and if not, what can go to?

  Would be very grateful for any support.

  Ok... This is so the list of processors that has been tested on this point, I'll say should work... something outside this list, I'm not sure...

• T7250 (2.0 GHz, 800 MHz, 2 MB L2 cache)
• T7100 (1.8 GHz, 800 MHz, 2 MB L2 cache)
• T2310 (1.46 GHz, 533 MHz, 1 MB L2 cache)
• T2330 (1.60 GHz, 533 MHz, 1 MB L2 cache)

• Satellite P300-150: slow processor during the test with the id tool intel

  Hello

  I just bought a Satellite P300-150 and it was working well in general... play lotro with few problems, but not in dx10 cos it chuggs as hell.

  I noticed he had a genuine problem of warhead of the crisis in the recommended settings, but thought it was just cos he couldn't do.

  But I downloaded the untilty of Intel processor id and he gave the following results... as you can see on the bottom 4 lines the processor is very upset with the expected results for the frequency and buses (fewer than half actually).

  Intel recommends if there is a huge gap, I need to contact the manufacturer... which brought me here.
  Any advice before contacting tech support directly?
  Just maybe I can play warhead after all! : o).

  Utility to identify processors Intel (r)
  Version: 3.9.20080910
  Timestamp: 2008-10-03 22:27:03
  Number of processors in system: 1
  Current processor: #1
  Cores per processor: 2
  Disabled cores per processor: 0
  Processor name: Intel (r) Core (TM) 2 Duo CPU T8300 @ 2.40 GHz
  Type: 0
  Family: 6
  Model: 17
  Step by step: 6
  Review: 60 ° C
  CPUID level: has
  L1 Instruction Cache: 2 x 32 KB
  L1 Data Cache: 2 x 32 KB
  L2 Cache: 3 MB
  Packing: FC-PGA/BGA
  EIST: Yes
  MMX (TM): Yes
  SSE: Yes
  SSE2: Yes
  SSE3: Yes
  SSE4: Yes
  Enhanced Halt State: No.
  Execute Disable Bit: Yes
  Hyper-Threading technology: No.
  Architecture Intel 64: Yes
  Virtualization Intel (r) technology: Yes
  Expected processor frequency: 2.40 GHz
  Frequency of the processor reported: 1.07 GHz
  The expected system Bus frequency: 800 MHz
  The reported system Bus frequency: 357 MHz

  Hello

  Satellite P300-150 was equipped with the Intel Core 2 Penryn T8300 processor.
  This processor supports Enhanced Intel SpeedStep technology.

  Enhanced Intel SpeedStep technology allows the system to dynamically adjust the tension and the processor core frequency. This means that the CPU doesn't always work with maximum performance, but only if it of needed. This helps minimize the heat dissipation and allows to secure the battery energy!

  The CPU seems to be slow check with the Intel ID tool ;)

  For more information on Intel Enhanced Intel SpeedStep Technology check out these articles from Intel:
  http://www.Intel.com/CD/channel/reseller/ASMO-na/Eng/203838.htm

  http://www.Intel.com/support/processors/sb/CS-028855.htm

  Welcome them

• Satellite M300 PSMD4A - Windows Vista is unable to load the user accounts

  OS: Vista Business 32 b
  Model: Toshiba Satellite M300 (PSMD4A)

  Problem: When I turn on the laptop it charges upwards which is usually the login screen, but it does not display * all * accounts of users and, therefore, it is impossible to connect!
  Survey: I started the computer in safe mode, that the logging in process works very well. I thought it might be a mistake with the scanner finger print driver device manager still had no problems with it, but I discovered the + security processor loader driver + had the error code read 24 ' + this device is not present, is not working properly or is not all its drivers installed + ' I couldn't find something online that explains how to fix this error.

  Note: I said that the splash screen was previously empty and contained only the vista background startup and loading icon turns with the words "+ Please wait +" and a flick every now and then as if failure to sign what ever he was having problems with. I don't know when that changed sypmtones as now he did not come with please wait and an icon of spinning but rather with + just + ease of use and close buttons.

  Cry for Help: If anyone of you has an idea of what I should try to do that would be much appreciated. If you need more information please just ask.

  Thank you

  HM, that's a good question

  I think I can t really help you, but have you tried to reinstall the operating system from the Toshiba Recovery disk?
  I think that after that the problem needs to be solved.

  Maybe someone else can explain, why they have this error or has another idea.

• 15-e020sx Notebook PC Pavilion: upgrade of processor of 35 to 45 w

  Hello

  my system is HP Pavilion e020sx-15 Notebook PC. my current processor is Intel Dual Core i3 processor - 3110 M 2.40 GHz (3, 0 - MB L3 cache, FSB 1600 MHz, 35W).

  According to the Manual, I can move to processor 2.20 GHz Intel Quad Core i7-3632QM (turbo SC up to 3.2 GHz, FSB 1600 MHz, 6: 0 - MB cache L3, 35 W)

  but I have an Intel Quad Core i7-3630QM 2.40 GHz processor (turbo SC up to 3.40 GHz, FSB 1600 MHz, 6: 0 - MB cache L3, 45 W)

  My concern is about the difference in power between the two processors. What happens if I installed this 45w processor in my system?

  I see that the HM76 chipset support this CPU.

  I upgraded the memory of 16 GB, which, according to the manual, I am only allowed up to 8 GB. then maybe some fetchers are not documented.

  I can try, but the upgrade of the processor is not as easy as the upgrade memory.

  concerning

  There is a more fundamental problem. Look at the list of the cards system on page 24 of the manual. See how there are motherboards which are described to include a processor? The i3 - 3110M models have the processor soldered to the motherboard, so any form of just the processor upgrade is not an option for you. I'm sorry.