ESX Cluster load - wise host...

Hi all

I have 2 groups with the ESX hosts.

Now I need to get the report for each configuration of cluster and cluster has HOSTs.configuration... I want the report as report cluster resource and the cluster HOST... same

as below

NOMCLUSTER |  Total space (MB) | Available CPU (Mhz). Total of the CPU (Mhz).   Total physical memory (MB) |   Memroy available (MB)

____________________________________________________________________________________________________________


Thks for LUKE providing report below. , I received this report of our vmware blogs, its rreport even this only for CLUSTERS

I hope you understand my problem.

appreciate your help

Thank you

ALDOVMWARE

# Virtual Center Server
$VCServerName = 'my servername. "
$creds = get-Credential
# Some variables
$portvc = "443".
$VC = connect-VIServer-Server $VCServerName - Credential $creds - ErrorAction Stop - port $portvc
$report = @)
$clusterName = "MonitoringTestCluster".
$report = foreach (Get-cluster-name $clusterName $cluster) {}
$esx = $cluster | Get-VMHost
# $ds = get-Datastore - VMHost $esx | where {$_.} Type - eq "VMFS" - and $_. Extensiondata.Summary.MultipleHostAccess}
New-object PSObject-property @ {}
VCname = $cluster. Uid.Split(':@') [1]
DCname = (Get-Data Center-Cluster $cluster). Name
NOMCLUSTER = $cluster. Name
'Number of guests' is $esx. County
'Total of processors' = ($esx: measure - InputObject {$_.}) Extensiondata.Summary.Hardware.NumCpuPkgs} - sum). Sum
'Total core' = ($esx: measure - InputObject {$_.}) Extensiondata.Summary.Hardware.NumCpuCores} - sum). Sum
'Ability to failover current CPU' is $cluster. Extensiondata.Summary.AdmissionControlInfo.CurrentCpuFailoverResourcesPercent
'Ability to failover of current memory' is $cluster. Extensiondata.Summary.AdmissionControlInfo.CurrentMemoryFailoverResourcesPercent
"Configured failover ability" = $cluster. Extensiondata.ConfigurationEx.DasConfig.FailoverLevel
"The level of automation of migration" = $cluster. Extensiondata.ConfigurationEx.DrsConfig.DefaultVmBehavior
'Recommendations of DRS' = & {$result = $cluster. Extensiondata.Recommendation | %{$_. Reason ;} If ($result) {[string]::Join(',',$result)}}}
'DRS flaws' = & {$result = $cluster. Extensiondata.drsFault | %{$_. Reason ;} If ($result) {[string]::Join(',',$result)}}}
'Migration threshold' is $cluster. Extensiondata.ConfigurationEx.DrsConfig.VmotionRate
'hosts target loading standard deviation' = "NA".
"Host current care gap" = "NA".
'Total physical memory (MB)' = ($esx |) Measure-Object-MemoryTotalMB property-sum). Sum
'Configured MB memory' = ($esx |) Measure-Object-MemoryUsageMB property-sum). Sum
'Available Memroy (MB)' = ($esx |) Measure-object - InputObject {$_.} MemoryTotalMB - $_. MemoryUsageMB} - sum). Sum
'Total CPU (Mhz)' = ($esx |) Measure-Object-CpuTotalMhz property-sum). Sum
'Configured CPU (Mhz)' = ($esx |) Measure-Object-CpuUsageMhz property-sum). Sum
'Available CPU (Mhz)' = ($esx |) Measure-object - InputObject {$_.} CpuTotalMhz - $_. CpuUsageMhz} - sum). Sum
'Total of free space (MB)' = ($ds | where {$_.}) Type - eq "VMFS"} | Measure-Object-CapacityMB property-sum). Sum
'Configured (MB) disk space' = ($ds |) Measure-object - InputObject {$_.} CapacityMB - $_. FreeSpaceMB} - sum). Sum
'Disk space available (MB)' = ($ds |) Measure-Object-FreeSpaceMB property-sum). Sum
}
}
$report | Export-Csv "Q:\Cluster-Report.csv" - NoTypeInformation - UseCulture

Try this, it's the closest you can get.

You cannot combine different objects (files) in a CSV file.

# Virtual Center Server
$VCServerName = "my servername" $creds = Get-Credential # Some variables
$portvc="443" $VC = Connect-VIServer -server $VCServerName -Credential $creds  -ErrorAction Stop -port $portvc$report = @()
$clusterName = "MonitoringTestCluster"foreach($cluster in Get-Cluster -Name $clusterName){
  foreach($esx in (Get-VMHost -Location $cluster)){
    $report += New-Object PSObject -Property @{
        VCname = $cluster.Uid.Split(':@')[1]
        DCname = (Get-Datacenter -Cluster $cluster).Name        Clustername = $cluster.Name        VMHost = $esx.Name        "Number of hosts" = $esx.Count        "Total Processors" = ($esx | measure -InputObject {$_.Extensiondata.Summary.Hardware.NumCpuPkgs} -Sum).Sum        "Total Cores" = ($esx | measure -InputObject {$_.Extensiondata.Summary.Hardware.NumCpuCores} -Sum).Sum        "Current CPU Failover Capacity" = $cluster.Extensiondata.Summary.AdmissionControlInfo.CurrentCpuFailoverResourcesPercent        "Current Memory Failover Capacity" = $cluster.Extensiondata.Summary.AdmissionControlInfo.CurrentMemoryFailoverResourcesPercent        "Configured Failover Capacity" = $cluster.Extensiondata.ConfigurationEx.DasConfig.FailoverLevel        "Migration Automation Level" = $cluster.Extensiondata.ConfigurationEx.DrsConfig.DefaultVmBehavior        "DRS Recommendations" = &{$result = $cluster.Extensiondata.Recommendation | %{$_.Reason};if($result){[string]::Join(',',$result)}}
        "DRS Faults" = &{$result = $cluster.Extensiondata.drsFault | %{$_.Reason};if($result){[string]::Join(',',$result)}}
        "Migration Threshold" = $cluster.Extensiondata.ConfigurationEx.DrsConfig.VmotionRate        "target hosts load standard deviation" = "NA"        "Current host load standard deviation" = "NA"
        "Total Physical Memory (MB)" = ($esx | Measure-Object -Property MemoryTotalMB -Sum).Sum        "Configured Memory MB" = ($esx | Measure-Object -Property MemoryUsageMB -Sum).Sum        "Available Memroy (MB)" = ($esx | Measure-Object -InputObject {$_.MemoryTotalMB - $_.MemoryUsageMB} -Sum).Sum        "Total CPU (Mhz)" = ($esx | Measure-Object -Property CpuTotalMhz -Sum).Sum        "Configured CPU (Mhz)" = ($esx | Measure-Object -Property CpuUsageMhz -Sum).Sum        "Available CPU (Mhz)" = ($esx | Measure-Object -InputObject {$_.CpuTotalMhz - $_.CpuUsageMhz} -Sum).Sum        "Total Disk Space (MB)" = ($ds | where {$_.Type -eq "VMFS"} | Measure-Object -Property CapacityMB -Sum).Sum        "Configured Disk Space (MB)" = ($ds | Measure-Object -InputObject {$_.CapacityMB - $_.FreeSpaceMB} -Sum).Sum        "Available Disk Space (MB)" = ($ds | Measure-Object -Property FreeSpaceMB -Sum).Sum    }
  }
}
$report | Export-Csv "Q:\Cluster-Report.csv" -NoTypeInformation -UseCulture

Tags: VMware

Similar Questions

  • Penetrating VM from ESX Cluster stand-alone ESXi Server

    I get an error trying to move a virtual machine of cluster VI in a standalone ESXi Server, someone had a bit of luck this?  I tried the following: Get-VM-name "CO-WS-TEST1" - location (Get-VMHost "CO-WS-TEST1"). Move-VM - Destination (Get-VMHost "CO-VM-TEST2") where CO-VM-TEST2 is a stand-alone ESXi server and CO-WS-TEST1 is in an ESX Cluster with VI.

    I get the following error:

    Get-VMHost: 2009-04-13 13:08:08 Get - VMHost VMHost with the "CO-VM-TEST2" name not found, using the specified filters.

    On line: 1 char: 60

    + Get-VM-name of the CO-WS-TEST1 | Move-VM-Destination (Get-VMHost & lt; & lt; & lt; & lt; "CO-VM-TEST2")

    Move-VM: cannot bind parameter 'Destination '. Could not convert "" to "VMware.VimAutomation.Types.VIContainer".

    On line: 1 char: 48

    + Get-VM-name of the CO-WS-TEST1 | Move-VM-Destination & lt; & lt; & lt; & lt; (Get-VMHost "CO-VM-TEST2")

    Thanks in advance for any help you can give me.

    What is ESXi system managed (for example with a non-free full license) by your vCenter?  If this isn't the case, then you can not make a gesture like this.  You can probably fake it with enough script and help of some external tools to make disk copy.

    [vExpert |] [ http://www.vmware.com/communities/vexpert/], PowerShell MVP, moderator of the VI Toolkit forum

    Author of the book: VMware Infrastructure Management with PowerShell

    Co-host, PowerScripting Podcast (http://powerscripting.net)

    Need help in General, other than VMware PowerShell? Try the PowerShellCommunity.org forums

  • LAN-Free backup of snapshots VMDK of ESX Cluster

    My intention is to perform a backup outside shots VMDK of ESX Cluster to VCB Proxy Server LAN.

    I have a scenario where I have 3 ESX servers with 3 x 800 GB LUNS in a storage group separate on a CX 310 SAN box. The Ids., (HLUs) host these 3 LUN LUN are 0, 1, and 2. All these three LUNS is a VMFS volume each on the ESX Cluster and all three LUNS are visible to all the ESX servers.

    I have a physical host that boot from SAN (the same box of CX 310 SAN) and this host will be designated as the VCB Proxy Server.

    Now, I'm going to add a 1 TB LUN to the storage group as the LUN 4 ESX servers and the Id., (HLU) host LUNS for this one will be 3. This logic unit number will be added as the 4th volume of the cluster ESX VMFS. It will also show all three ESX servers in the Cluster.

    I'll create a Windows VM 'VM2K3' on ESX Server 1, and I intend to add the volume (1 TB) entire VMFS 4th as "D:\". "drive"VM2K3 ". I'll share this disc "D:\". "and it will be mapped as drive"T:\ ". "on the VCB Proxy Server. This disk 'T:\ '. "will be the target for the storage of the VMDK to snapshot backups, in a compressed format. I use VizionCore vRanger software connection to this effect on the server VCB Proxy itself.

    Question 1.

    This scenario will provide the backup off LAN of VMDK instant?

    Question 2.

    In the case of a failure full 1 ESX Server, VMotion will be or a manual movement of the virtual from Windows "VM2K3" machine would affect the LAN-Freee of instant VMDK backup? If so, how will this affect and what will be the impact?

    Question 3.

    The "C:\". "Logic of the VCB Proxy unit number will be a 30 GB SATA LUN and the total size of the RAM on the VCB Proxy Server is 8 GB. The ability to drive "C:\". "30 GB will be sufficient to make faster given the fact that I have about 45 VMs at this point in time?

    Any help or suggestion or two in this case would be very useful.

    Hello

    A physical machine cannot directly access a VMDK in a VMFS. There may directly access LUN, that LUN could then accessible by a VM with RDM or virtual RDM mode. But why would you do it is really beyond me.

    The VCB Proxy running W2K3 and you present all your VMFS volumes (make sure that you don't have a letter assignment drive automatically enabled when you make this presentation). See http://www.vmware.com/pdf/vi3_35/esx_3/r35/vi3_35_25_vm_backup.pdf for assistance with this.

    VCB proxy then read this VMFS and copy data from it to your T:\ drive (MON).

    Remember that no two hosts can access the same logical unit number unless you use a clustered file system.

    Best regards
    Edward L. Haletky
    VMware communities user moderator, VMware vExpert 2009
    ====
    Author of the book ' VMWare ESX Server in the enterprise: planning and securing virtualization servers, Copyright 2008 Pearson Education.
    Blue gears and SearchVMware Pro items - top of page links of security virtualization - Security Virtualization Round Table Podcast

  • To VMs in Server VM ESX cluster

    Aloha,

    I have a host running six XP SP2 virtual machines on VMWare Server 1.0.5. I want to migrate my ESX cluster.  What is the easiest way to do this?

    Mahalo, Bill

    You do not need the enterprise version, you can use the free version.

    You install Vmware Converter on the server that has VMware Server installed, then you can either do convert the 'physical' machines which are virtual machines or turn off the VMs system and get a Converter to convert the VMware ESX Server VM files

    -

  • Power CLI script to add multiple VLANs with port group name in an ESX cluster

    Hi all

    Can someone help me get a script adds several VLANs with port group name in an ESX cluster?

    Kind regards

    Suresh

    OK, so you just need to do an Import-Csv inside the loop and change the variables accordingly.

    What is the provision of this CSV file?

  • How to migrate VRM to another ESX/cluster server

    We have our VRM and VR servers running with vReplication in an ESX cluster.  The network manager has decided to split the ESX server and create a new cluster for our servers, leaving the old cluster and ESX server environment from the view.  I was able to migrate the VR server without any problem, but receive a warning when you try to move the VRM.  How is it best to do it without having to stop the replication and recreate all (that has been no joy for us)?

    Hello

    Safely, you can migrate the VRM machine or use vMotion.
    Make sure you remove the VRM from the inventory of VC machine, as in this case, the configuration of the OVF environment will be lost.

  • Memory for the ESX Cluster stats | Total, Avail, allocated, used...

    Before going out and trying to write a script that does the following, I wanted to know if someone has already written something similar:

    • Collect the total amount of RAM in each
      ESX cluster less the total RAM allocated to virtual machines in the cluster.

    • For example, if
      32 GB of RAM is available in a cluster and there are four 1 GB VMs and virtual two 2GB computers running, then we have 20 GB of RAM remaining to support 20 1 GB VMs.

    • Pull the memory allocated quantity to the VMs system compared to the amount actually used as a measure as well.

    Thank you

    I don't know if you need to calculate the memory available to the virtual machines like that.

    Not all memory in a cluster is available for running virtual machines.

    And a virtual machine does not always all of the memory that you have configured with the memory available to the cluster.

    And of course, this changes over time depending on the activity of the virtual machines.

    Take a look at the total on the cluster by vm and check if the script there is no more sense to what you try to get.

  • Monitoring selected VM, ESX, cluster hosts

    Hello

    I check if it is possible to select the specified ESX host or Virtual Machines to monitor instead of pulling all the VMS and hosts in Foglight? Thank you.

    Kind regards

    Jamie.

    You can via a user name, but we do not support that.  The problem lies in the case you have a virtual machine, and then you forget about the potential problems with the host.  If you have only a few hosts, it could miss part of a cluster or something else using the storage...  There are many cases where not having not any data could cause problems, so we don't support all a vCenter.

  • Add ESXi 4.1 host to ESX cluster

    Can I add a new host ESXi 4.1 to a cluster of ESX 4.0 flawless on the servers in the cluster to the new host ESXi 4.1 once it reconfigures the AP for the HA cluster?

    IF not is there a reason that I can not add the server to the cluster during the day without any problem?

    Thank you for your help with this.

    You should have no problem adding 4.1 host in the cluster.  However, in order to manage a crowd 4.1, you MUST run vCenter 4.1

    .. .on a side note.  Usually, I add hosts in the cluster in maintenance mode.  Once it has been added, exit the maintenance mode so the HA agent can be installed.  In addition, none of this will cause an HA event.

  • Change of address IP of VirtualCenter, no host to ESX cluster management

    Hello all,.

    Our Team MS moved our VirtualCenter server to a new IP address. But since then, I had problems with a cluster I had previously put in place.

    Since the change, the cluster with 2 esx hosts cannot be destroyed, the esx hosts themselves cannot be dragged, maintenace ito disconnected or split mode.

    I suspect that it is because the hosts are always sending heartbeats to the old address IP of VCenter. Any action on the cluster or host of just hangs.

    Is that anyway, since the ESX servers themselves to be removed from the VCenter, so I can add?

    Trying to readd the host in VC me that it is managed under a server VCenter (old IP) and if you override you will be asked to get an error "the host is already connected to this server, VirtualCenter)

    Any ideas/thoughts will be appreciated.

    Have you tried to restart your Windows VC service?

  • Bruge ESXi ESX cluster failover host som

    VI er PT. igang med at opsaette our VMware losning close.

    VI har investeret i 2 ESX sphere servere tilsluttet et HP EVA SAN. Det var unfortunately alt hvad okonomien riahi til his jeg forsoger at strikke in losning fees med will failover manual til en ESXi host med local storage...

    Oprindeligt var tarpaulin at benytte connection vRanger VizionCore til at the Tagus backups af ESX clusteret men da der ikke er vStorage I have ESXi (free) kommer det ikke til at fungere

    His... er der nogen der har and godt til how men value I det extreme nedbrud (fx SAN' and) hurtigst possible kan mest kritiske maskiner startet op pa ESXi fa' in?

    Hejsa,

    Yes, the kan godt afvikle din vRanger connection pa ESXi hösten backe op lokalt og. Var naked and til and billigt/nature storage til one NFS backup shared.

    Best regards

    Frank Brix Pedersen

  • Retiring legacy 4.1 ESX cluster


    Hi all

    We currently have two clusters managed by a single server vCenter.  It is the most recent cluster 5.1 ESXi and the other is the legacy ESX 4.1 cluster.  We have already migrated all of our virtual servers to the new cluster 5.1 ESXi.  The ESX 4.1 cluster legacy has no more any virtual server in it.  Existing ESX 4.1 cluster hosts will not be reused.  Data exported to the existing cluster warehouses also won't be necessary and in storage arrays are deleted.

    I would like to know what are the appropriate steps to remove the ESX 4.1 cluster legacy?

    Thank you

    Soraya

    Here is a guide on best practices to remove LUN with the vSphere data store: best practices: how to properly remove a unit number logic of a host ESX - VMware vSphere Blog - VMware Blogs

    In any case, if the unit number logic/data store used by the hosts to version 4.x are not accessible from the hosts to 5.x, you can simply delete the host to vCenter and the data store will be deleted too without impact to the hosts to 5.x.

  • Heavily laden prod cluster - manage a host failure?

    Hi all

    Our cluster of Prod shows three guests in it with more than 90% the use of memory, I need to patch to a single host taking sense ESXi 4.1 Update 2 out at the same time and mode of maintenance to apply updates, how do you think that the cluster handles this recital each host is already very heavily loaded?

    Everything will be ok?

    Thank you

    Stew

    It depends on your reservations memory and the amount of memory is really active.  Some applications can survive very well--those with reservations of memory will continue to have their memory full, but those who don't will be puts balloon and possibly swapping.

    Start by looking at your hosts and see how memory is active granted vs.  If you have 90% of active memory, you are in trouble.  If you have a granted 90% but only 40 or 50% active, you can survive very well, the edit window.

    I also assume that clients are configured according to best practice documents.  For example, customers Java and SQL have memory well-positioned reservations.  If you don't have them, you can run good now but switch when you are under pressure of memory (which you will be, as soon as the first host goes into maintenance mode).

  • Add esx cluster with different cpu

    Hi all

    I have a cluster with 5 esx 4.0 u1-208167, which installed on IBM x 3550 M2 ((2 x Intel® Xeon™ processeur E5520) .)

    I want to add a server to server cluster .the is IMB x 3550 m3 (2 x Intel® Xeon™ processor E5620 4 c)

    do I have to make a chenges on Esx servers / vm / vcenter when I add the new esx for my datacerter and to the cluster so I can do Vmotion / storage migrate this server in the cluater (I have the appropriate license and plug)?

    Thanks for the help

    is there another way to activate the CEV on my existing cluster and does not create a new?

    You can try to create a new cluster and select CVS it and move all your hosts to this cluster

    should I turn off my vm all?

    You will need to put the hosts in maintenance mode. So what you can do is put the host 1 in maintenance mode, virtual machines will move to host 2. Now move the new active EVC cluster host 1 and continue to do this until all of your hosts are in the cluster. You can try vMotion your VM 2 host to host 1 which is now in the new cluster, but it all depends on what your processor will hide VCA is activated... And if you cannot vMotion, virtual machine in a VCA not to an active evc cluster cluster, then Yes, you will have to turn off and restart your virtual machines in the new cluster

    I also have SRM ad site.do I need to activate the CEV on the cluster, I have here (a different Vcenter)

    No u don't.

    Follow me @ Cloud - Buddy.com

  • EVC cluster creation / migration hosts him / minimal disruption VM

    I am reshape my somewhat environment and need a bit of advice.  Currently, I have 2 ESX hosts in a non - EVC cluster and built a new blade server.  The new blade and 2 hosts will work together in a cluster active CVS.  I know that I have to run my EVC cluster "Intel Xeon Core 2" mode.  All 3 hosts will support this mode.

    The News / 3rd cluster is sitting in his own vCenter, a VCA-activated cluster (in mode above).  Has no running VMS, it is already configured with network access and storage that matches that of the 2 existing/production hosts, which are currently managed by another instance of vCenter (but I am moving them out of this instance of vCenter in this new EVC-activated, to join the new blade.

    All hosts running ESX 3.5 U4.  vCenter is 2.5 U4.

    BIOS on guests must be modified to memory XD in so that they can be used in an EVC cluster, so I know I need to stop at SOME point to get them in the cluster active CVS.

    I have an idea on how to address these requirements, with a big goal is NO interruption of service for running virtual machines.  VMs can be migrated to a new cluster, EVC-activated, coming from an old cluster VCA not compatible?  Most all current VMs based on Intel some running already in reference "Intel Xeon Core 2" EVC mode or I'm just kidding me and must arrest all of them at some point after they "seized" a VCA-activated cluster?

    How would you do to this migration between vCenters and Clusters?  I think I can use 'Disconnect' the first vcenter (to at least avoid having to go into Maint Mode and then 'delete' of the first cluster/vCenter database)... also, I'm looking for the most logical get "here" to "there".  Thank you.

    I see that the problem of different vCenters/Clusters is resolved.

    What you need now is to know if you can VMotion between two ESXs with different processors. Before existing VCA, I have had... and had NOT a few difficulties doing this. It is not a problem when DIFFERENT pCPUs have the SAME GAMES of INSTRUCTIONS (SSE3, SSSE3, SSSE4 and so on...) Even if the sets are different, I was able to mix the MASK of CPU management options, which are by VM (thing that I didn't like... There should be an option to change this on a same CLUSTER basis or an ESX!).

    I recommend you to test for differences between the sets of instructions of the Jepp of two ESX with this tool, I think it is the best out there:

    http://www.run-virtual.com/?page_id=155

    If the sets of instructions are different, you have a problem, because you have to find the bits change in the MASK of CPU options in each virtual machine... and who needs a reboot, too. I think they will be different, because more recent pCPUs with FlexMigration (VCA compatible Intel processors), simply because they are new they surely have a new instruction set (perhaps SSSE4)

    Good luck!

Maybe you are looking for

  • I am not able to connect to the main wifi network but can connect to the network of comments.

    Hello This is something new, I am facing to where I am not able to connect to a main network of airport extreme, but can connect to the network of comments. Guest network works perfectly fine while the main network does not connect to devices in the

  • hp6910p

    Hello I just bought a hp6910p opportunity running vista professional 32-bit with 4 GB of ram and a 80 GB HDD. I would like to upgrade the hard drive, to add more storage and hope that it will be possible to install a larger capacity, something like 5

  • Problem check CRL.

    Hello I am facing the same problem here: https://supportforums.cisco.com/thread/2047836. The main ideea is that I want to implement the accord secured over ipsec with digital certificates. The problem is I want to do everything offline (with copy/pas

  • Win 7 is unable to map drive Buffalo Linkstation network

    Hi, for some reason or another my Win 7 can't map drive from Buffalo Linkstation network. He sees with FTP and it is found as a media server, but I can't just map it. My XP pc 'sees' without any problem and also my PS 3 'sees' but with Win7... no dic

  • Find missing at time interval in SQL

    All theNeed help with SQL to find the missing time interval.My query returns data as shown belowData1StartTime EndTime column=======   =======   =======T2 09:00 18:00T3 20:00 23:00Data2StartTime EndTime column=======   =======   =======T1 15:00 20:00