results of math processor load

Similar Questions

• Links of search results Google does not load (not a direct new problem)

  Simple problem:
  1 enter a term for Google to search for (either using the Google toolbar installed or via his landing page).
  2. the results are returned correctly.
  3. However, the returned links open in the same tab of search result, or in a new tab or a new window.
  4. Select the link in the search results tab does nothing. Firefox seems to be a momentary load try before remaining in the same place.
  5. launch the link in a new tab/window returns a Google long-chain based on the prefix (i.e. www.google...) address in the navigation of an empty tab/window.
  6 addresses returned by the search can be copied and pasted into new tabs/windows to load without a problem. Research process of Google to normal using this query works since IE every time.

  Test: "Energizer Bunny".
  Returns the link: www.Energizer.com/Energizer-Bunny/pages/Bunny-Center.aspx
  Has address: http://www.Google.ca/URL?SA=t & rct = j & q = % 20bunny energizer & source = web & cd = 1 & ved = 0CDYQFjAA & url = http %3% 2F % www.energizer.com%2Fenergizer-bunny%2Fpages%2Fbunny-center.aspx 2F & ei = ruYyT47cIYHjiALj69XGCg & usg = AFQjCNHg-eabuCQBx6Bv36V9F4pN4tQRYA & cad = AJLN

  Note that this is not the Google redirect problem that many users have encountered, but something different.

  Suggestion of John99 above that the cause of the problem is a problem of update of Google I think is correct. The discussion link: https://support.mozilla.org/forums/contributors/708153 indicated that Mozilla is working with Google and that a cancellation would be promulgated.

  Although I can say this was done because the Google search function works again (from 4 PM MDT). I tried with some queries from first time and they worked as announced. All features have been restored.

  (For the record, cookies were already on my machine but I clear them and hide according to the first answer - that didn't work. No other solves above I only implemented. "So as far as I'm concerned, he was a"problem of Google", it was a"fix Google").

  Hope that affected everyone else now has the same experience. Thanks to those who offered their intelligence.

• current processor load

  Hi all
  
  How can I select value of load current processor? It is possible at all?

  Check out this piece by Kyle Hailey [url http://dboptimizer.com/2011/07/21/oracle-cpu-time/] time CPU Oracle. You will find a lot of useful stuff out there. Its range of opening...

  "There are 3 types of CPU in Oracle stats."

  ... should tell you how simplistic is your question.

  Cheers, APC

• geekbench64 vs geekbench32 results for upgrade processors r61 and r500

  Hello

  on the point to upgrade my R61i T2330 to T7700 (given as the best bet on most of the discussions) and Win7-64; When you check the scores of benchmark on the net I see that the Geekbench64 gives the T2330 better while Geekbench32 gives the opposite (see image). Any idea on how to do this?

  (seen the same thing on the r500 T5870 vs. T9300 processor)

  Thank you

  

  AFAIK the T7700 is much faster. Look at the specifications, not points of reference.

  http://cpuboss.com/CPUs/Intel-Pentium-T2330-vs-Intel-Core2-Duo-T7700

• Windows 2012 high R2 of the processor load when file transfer

  Hi all

  Here are the details:
  We have 2012 R2 Standard Windows that is running on the ESX host. There one vCPU.
  When transferring files via gigabit network system interrupts, process uses about 80% of CPU load.
  Maybe someone had a familiar problem?
  Thank you very much.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• which would result in Explorer windows load very slow or sometimes reply

  When I click on the desktop or click control panel windows explore takes long time to load. What could be the possible cause. I defragment the computer but did not help

  How much RAM?

  Select Ctrl + Shift + Esc and the performance tab. Under the system memory, which is Total, the Cache and the free?

  Did you look in Event Viewer?

  To access the system log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window select Windows and the system logs. Place the cursor on the system, right click and select filter current log. Check the front of the error and click OK and see you only reports errors. Click header to sort on the Date and time. You may need to click a second time to see the last report above.

  A tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. Click the copy button to place a copy in the Clipboard and close Event Viewer. Now start your message and paste it into the body of the message. Make sure that it is the first dough right out of the event viewer.

• Processor load of the svchost (Windows Update)

  Hi all

  I have a problem with my new installed Windows 7 (32-bit) PC. A single process (svchost.exe) use 50 to 60% of the CPU load, which leads to a low performance for other programs. After researching, I discovered that this is due to a problem with the update of Windows. When I disable the Windows Update the CPU load went to close to 0%. But unfortunately I won't be able to get updates aynmore.

  I searched the Internet and tried a few ways to fix:

  1: turn off Windows Update--> delete everything in the folder of C:\Windows\SoftwareDistribution--> download activate Windows Update

  This led to a shutdown of the svchost.exe for maybe 5 minutes. Subsequently, everything was as before.

  2: using the Microsoft Fix "WindowsUpdateDiagnostic" that resets the update together.

  No change to the problem above.

  When Windows Update is looking for new updates that he continues to search for hours (and probably more) without finishing. Some people in the Internet said it might be a problem with a special "Windows Update Agent 7.6.7600.320' update. This one is the only one I have in my history of update. What other shots on my eyes, is that whenever I step 1 (above) before svchost take still more CPU load some process called "TrustedInstaller" was shortly at 50% of CPU load. Maybe it's some special update from the Windows Update is blocked on?

  Do you know what I can do?

  -Simon

  I noticed this also on all of my devices.  Of course, there is a Windows Update to fix the Windows Update...

  https://support.Microsoft.com/en-us/KB/3102810

• Google image search results does not load Firefox

  Firefox will not load the google search results. It will load the results page with thumbnails, etc., but if you click on one of them, just a spinning icon loading is displayed on the tab and it never loads.

  I tried:
  Both registered in and out of google account,
  Other areas of google are working without any problems (news, shopping, etc.).
  Site works perfectly under Internet Explorer,
  Firefox running in safe mode,
  Manually turn off all plugins and addons,
  Clear the cache and cookies,
  Results of opening in a new tab just results in a blank page with web address, but it doesn't ever, load
  Restarting my PC and router.

  He has not worked for at least the last 6 hours. Last time I used it was a week ago and it was working fine then. I didn't notice any problems on other sites this week that I can remember.

  Updated firefox to version 17.0 seems to have solved this problem.

• In Windows experience Index of my computer's processor performance are increased from 5.8 to 4.7.How can I increase this?

  This Windows experience index per second processor calculations

  1 don't get too concerned about the experience index itself, the methods used to determine these scores is rather crude and produce no good empirical results and should be used only as a general guide.

  Also, the algorithms used are sometimes modified to allow changes in the technology available so can produce slightly different results from a previous run.

  Finally even if the utility is supposed to be able to compensate for other tasks, so it can be influenced by other processor loads may produce lower figures. Make sure the system is in the same State when comparisons.

  Processor performance has limited options to improve. Have you ridden any new memory since the last test?

• iPhone 5 loads some cables and not with others

  My iPhone 5 stopped to load with the original cable so I started using others and have had mixed results. It will load with an iPod Touch 5 g and an Anker 6' cable. It does not load with its original cable, an iPad 2 Air cable or Anker 1' cable. A technician has replaced the battery on my iPhone 5 and during his first visit, his cable did not work and on his second visit, it worked (even cable). With all the cables that do not work, I get the message "this cable or accessory is not certified and may not work reliably with this iPhone."

  Hello, SalinasEd!

  Thank you for joining the communities Support from Apple! I know how important it is that the iPhone is charging correctly with the cables. Looks like you; ve tried a few strides in using different Chargers so far. Take a look at this article here on If your iPhone, iPad or iPod touch will not charge.

  If your device doesn't load or loads slowly

  If you have a very low battery and plug in the power, a black screen or a black screen with a red battery may appear for a few minutes. Follow these steps and try again after each:

  1. Check your charge cable and USB adapter for any signs of deterioration, * as broken or bent pins. Do not use damaged accessories.
     
  2. Use a power outlet wall and check for connections between your cable, USB adapter and outlet or try another outlet closed.
  3. Remove all debris from the charge on the bottom of your device socket, then firmly plug your cable to charge your device. If the port of loading is damaged, your device probably need service.
     
  4. Leave your unit in charge for half an hour (if your device does not respond then Learn how to do).
  5. Force restart your device: press and hold the sleep/wake and home buttons at the same time for at least 10 seconds, until you see the Apple logo. So let your device for another half hour rate.
  6. If your device will not turn on or charge, grab your camera, the charging cable and charge adapter for an Apple Store or Apple authorized service provider for assessment. You can also contact the Apple Support.

  * If you are not sure if an accessory is damaged, take it to an Apple Store or the provider of services authorized Apple for evaluation or Contact the Apple Support.

  If an alert says that your accessory is not taken care of or certified

  These alerts can appear for several reasons: your iOS device could have a port of loading dirty or damaged, your loading accessory is defective, damaged or not certified by Apple or your USB charger is not designed to load devices.

  1. Remove all debris from the charge on the bottom of your appliance socket.
  2. Restart your iOS device.
  3. Try another USB cable or charger.
  4. Make sure you have the latest version of iOS.
  5. Contact Apple to set up the servicesupport.

  If you are not able to solve the problem with these steps, it might be better to contact Apple directly by clicking on Contact the Apple Support to find the best way to solve the problem.

  See you soon!

• Satellite M300 PSMD4A - Windows Vista is unable to load the user accounts

  OS: Vista Business 32 b
  Model: Toshiba Satellite M300 (PSMD4A)

  Problem: When I turn on the laptop it charges upwards which is usually the login screen, but it does not display * all * accounts of users and, therefore, it is impossible to connect!
  Survey: I started the computer in safe mode, that the logging in process works very well. I thought it might be a mistake with the scanner finger print driver device manager still had no problems with it, but I discovered the + security processor loader driver + had the error code read 24 ' + this device is not present, is not working properly or is not all its drivers installed + ' I couldn't find something online that explains how to fix this error.

  Note: I said that the splash screen was previously empty and contained only the vista background startup and loading icon turns with the words "+ Please wait +" and a flick every now and then as if failure to sign what ever he was having problems with. I don't know when that changed sypmtones as now he did not come with please wait and an icon of spinning but rather with + just + ease of use and close buttons.

  Cry for Help: If anyone of you has an idea of what I should try to do that would be much appreciated. If you need more information please just ask.

  Thank you

  HM, that's a good question

  I think I can t really help you, but have you tried to reinstall the operating system from the Toshiba Recovery disk?
  I think that after that the problem needs to be solved.

  Maybe someone else can explain, why they have this error or has another idea.

• Schedule of blackBerry Smartphones - sync results in double entries on the device

  When I sync with Desktop Manager, calendar entries in the device are not recognized, and as a result, it attempts to load all meetings to Outlook again.  How to eliminate double entry?

  The fastest solution is to WIPE the device and then re-sync.  Of course if you also have a wireless sync turned on and then continue to use the Desktop Manager software via USB, that cause you too might some problems.  Unfortunately, that's the quickest short to delete one by one in your email contacts software.  It would be well if there was a VB Script there would be delete duplicate, but there still should be very clever, because many users may have duplicate entries in it contacts.

• Unable to get the total number of records processed by the processor of trade rules

  Details of the environment

  ======================

  Disqualification Version: 12.1.3.0.0

  
  

  I use a business rules processor to implement multiple business rules on one record and I am looking for a summary of the number of records increased and does not have a specific rule.

  
  To illustrate:
  Suppose there are 2 rules, invalid number in Column1 and valid number on Column2.
  10 records to process and 3 folders don't rule 1 (valid on column1) and 9 entered failure of rule 2 (valid number on Column2).

  In the browser of result of the processor Business, the number of past records and failed is displayed but is not part of the output of the processor itself. In the example above, there will be 1 pass and 9 fail records and given the values of said the total number of records can be derived which is 10.

  This is why the expected output will be:
  Success of failure
  Rule 1:7 (10-3) 3
  Rule 2: 1 (10-1) 9
  Note: The number of records that failed can be derived from the table of the rule ID but I don't know how to get the total number of records in order to calculate the number of records that a given rule.

  I tried to publish the County of acceptance and rejection in the browser of result of the processor Business in an intermediate table and ask the same intermediate table to get the pass and fail values but Disqualification does not allow to write and read the same intermediary object in a single process. What is the best way to get the number of records total handled by the processor business rules? This kind of attributes (that do not exist only in the browser of result) can be included in the output of the processor in the next version of the Disqualification?

  In addition, the intermediate table contains only 1 sheet with pass and failure values while the exceptions which have individual failure on each rule contains 12 Archives. What would be the best approach to merge a single record into multiple records according to the example below?

  Staging table
  Success of failure
  1 9

  Exception table
  Single ID ID rule
  Rule 1 Record1
  Rule 1 Record2
  Rule 1 record Record3
  Rule 2 Record1

  Exception table with: staging Table data merge
  Rule ID ID Unique Pass Fail Total
  Rule 1 1 9 10 Record1
  Rule 1 1 9 10 Record2
  Recording rule 1 Record3 1 9 10
  Record1 rule 2 1 9 10
  
  Please notify.

  Hi Jason,

  The best way to explain how to do this is with an example project (DXI). I'll send you one in offline mode.

  -Mike

• Output arguments of the published processor or under

  Hello

  How to control the number of output to a sub processor or published arguments? I saw all the provisions here.

  Thank you

  You must select/appoint one of the members to act as the "output attribute" processor processors for your processor published.

  Similarly, you choose to be a display of results (or not) processor and the other to a processor of dashboard (or not).

  It is all made clear in online help to create processors - extracted below.

  The use of the attributes of merger is just a suggestion that allows you to choose exactly which ones you want and what to name them. Maybe it's not necessary to use it.

  

• BrowserLab does not work for me, he will not fulfill the load even if I have high speed internet?

  Object

  First time use of the browser lab does not.

  Description of the problem

  Okay, so, I'm working on a tutorial on CS5.5 page and I'm at the stage of using browserlab to preview online. I log in and enter my password then it opens my browser and I click on "Start using browserlab now" and a blanket of charge is displayed. It loads for about a minute and then remains 'white', which is actually the adobe with a language bar screen at the top right, but NO preview page? also, if I can go in dreamweaver again the browserlab tab reports an error saying "Timed out, failed to connect to BrowserLab.

  Steps to recreate

  1. This problem occurs every time, and I have never run.
  2. 32-bit Windows 7 OS.
  3. I am using BrowserLab main interface as well as tests through the integration of Dreamweaver (DW is version 11.5 build 5315)
  4. I don't understand what means this next statement? "What is the URL you are testing against?

  Expected results

  I thought that browserlab open up my page in several browsers on a single page, so I could see if there are errors for different types of browsers.

  Actual results

  Does not load properly and gives errors.

  Thanks in advance

  Meillon Marshall

  Hi Marshall,

  Thanks for the detailed report. Don't worry your #4 step, you do not at this point.

  From what I can tell, you're opening BrowserLab in your browser first, then doing an overview of Dreamweaver, is that correct? I would try a test where first test you BrowserLab in stand-alone mode and if it works, then try BrowserLab with Dreamweaver integration. Please try to do the following steps:

  1. Close all your browser windows and Dreamweaver.
  2. DW leave closed, open a single browser window and go to https://browserlab.adobe.com
  3. Sign in and request a screenshot by typing a URL such as http://www.yahoo.com pressing
  4. It works for you? Do you get the screenshots for that? If this isn't the case, please describe the measures you have taken and what you see
  5. If so, close your browser window and open Dreamweaver. Do not open your browser to BrowserLab
  6. In DW, open the Web page you want to view in BrowserLab and press preview in BrowserLab Panel like button on your photo
  7. You may need to log in again, but I would like to know what is happening with this test.

  Mark