currently connected network interface "network adapter 2" uses 'portgroup' is not accessible ".

Similar Questions

• I have norton antivirus online via my ISP and I had to disable, because it comes with an error that says "cable not connected or missing network adapter" I use dial-up.

  cable not connected network adapter

  I have norton antivirus online via my ISP and I had to disable, because it comes with an error that says "cable not connected or missing network adapter" I use dial-up and do not use any type of router and I'm not on a network. I also tried to disable my network card & it still says the same error. I have an internal network card that came w / the computer (NOT a PCI one) and I wonder if there is a cord or a plug inside my computer that must be plugged. I made some changes on the internal hardware and might have missed an and I didn't have to open my Tower if it wasn't. It's a big hassle! Help, please!

  Hello

  1. Once you get the error message?

  2. do you get the error when you try to disable Norton anti-virus?

  3. are you able to access the Internet explore?

  Temporarily disable the antivirus on the computer running software and check if you are able to install the software.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  WARNING: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

• Network Diagnostics cable - A is not connected to the Local Area Connection network adapter

  All the links are perfect - network card appears in Device Manager and work - ping 127.0.0.1 but seeing none on in the network connection - cable works in another system - I unplugged the power cables one night and restarted but no result-help solve this problem

  Hello

  Follow the steps in troubleshooting section and check if that helps:

  Network adapter problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  Also read these articles and check if it helps:

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-Windows-Network-Diagnostics-event-logs-to-solve-network-problems

• The Linux host, guest of WinXP, host has 2 network cards, how to choose which NETWORK adapter to use?

  I know it's something of an FAQ, but several hours spent on these forums and Google search gave me nothing of what works.

  All the solutions I've seen assume Windows as host and (something) as a guest.

  In my case, the host is Linux (CentOS 6.4) and invited is Windows XP.

  The host has two network cards, one on a 10.x.x.x network and the other on 192.168.x.x network.  In the guest virtual network adapter connects to the network 10.x.x.x.  I want it on 192.168.x.x network.

  I would be happy if I added another virtual network card and one of them connected to each network, but two of them connect to the 10.x.x.x network (with 10.x.x.x different IP numbers).

  The solutions I've seen indicate that under the Virtual Machine-> network adapter settings-> network connection, you click on the button "Configure the adapter" and load of come from there.  It would be great, but I have no button "Configure the adapter" or something like that.  I have a button "Advanced", but that just allows me traffic into and out of the butterfly and set a new MAC address, that's all.

  Because the host is Linux, I have also no equivalent to vmnetcfg.exe, at least none that I can find.

  So, where should I go from here?

  VMware Player is the version 6.0.0 (freshly upgraded 5.0.2 this afternoon).  I tried with version 5.0.2 and got the same thing.

  Thank you...

  Eric / www.rkt-tech.com

  You will need to use the virtual network Editor, although first you may need to create symbolic links.

  The first symbolic link already exist in a Terminal using the following command. Note: If connected a root the sudo command is not necessary when the.  Tip: Copy and paste the commands!

  ls-l/usr/lib/vmware/bin/vmware-netcfg

  If it exists, the output should be similar to the following.

  lrwxrwxrwx 1 root root 13 29 Sep 08:17 / usr/lib/vmware/bin/vmware - netcfg->/usr/lib/vmware/bin/appLoader

  At this point, you can simply use the following command to bring the virtual network Editor.

  sudo/usr/lib/vmware/bin/vmware-netcfg

  However, if you want easier access creates a symbolic link in: / usr/bin

  sudo ln-s/usr/lib/vmware/bin/vmware-netcfg/usr/bin/vmware-netcfg

  If the symbolic link/usr/bin/vmware-netcfg does not exist, then use the following command.

  sudo ln-s/usr/lib/vmware/bin/appLoader/usr/lib/vmware/bin/vmware-netcfg

  Then, to facilitate access to create a symbolic link in: / usr/bin

  sudo ln-s/usr/lib/vmware/bin/vmware-netcfg/usr/bin/vmware-netcfg

  To bring up the virtual network in a Terminal editor use the following command.

  sudo vmware-netcfg

  In the virtual network editor disable automatic bypass on vmnet0 by selecting the network map target in the bridge to: list box.

• the Bluetooth network connection network adapter is not connected

  I have connected to the internet yesterday and today, it says this every time wifes computer to send this message and please help I have windows vista inspiron 1720 oo and even when I plug the cord for the computer on the internet still does not work help please

  Hello

  I suggest you to run the automated FIXIT from the link below and also try the other steps.

  The problems with Bluetooth devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  See also:

  Set up a Bluetooth compatible device

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

• Unable to connect to the wireless adapter should use LAN

  another computer or a laptop can use the wireless adapter, but one of my knees can't connect to it. I have to use the LAN cable

  Hello

  Maybe this can help, http://www.ezlan.net/wireless.html

• Microsoft network adapter 03:54 works do not error code 31

  My home wireless network stopped working for no reason at all. I can still connect to the internet with my computer, but not with a wireless device in my house. All indications are that my modem is working properly. When I go into Device Manager, I have a wireless network. I go into the network cards and my microsoft 6 to 4 network card does not properly erroe code 31. I tried to uninstall the old one and put it back, with a new, but nothing seems to work. Please help me very frustrated.

  Hello

  Control Panel - device - networks - WiFi - Manager write down of the brand and model, and then double-click
  on the drivers Tab - get the version number. Then double click on update drivers (this can do nothing
  that MS is far behind the drivers of certification). Then right click on the WiFi AND peripheral 6to4 and UNINSTALL.
  REBOOT - it will refresh the driver stacks.

  Now, go to the system manufacturer and search for updated drivers, this will be your fallback. Then go to the Site of the manufacturer of the device
  and look for the even more recent drivers.

  Download - SAVE - go to where you put the driver - CLICK RIGHT to it - RUN AS ADMIN
  (repeat on the site of the manufacturer of the device)

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ==========================================

  You can also try a system restore before that happens however I would try the above back to
  First methods.

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Mini 210-1091NR wireless network adapter is disabled and will not return to the top.

  For a month every time I receive an update of windows, (and often!) My broadcom wireless adapter arrives as disabled when the computer restarts. Normally I can uninstall the driver and do a reinstall and the wireless will start working again. However after upgrade of the past few weeks, the wireless is not working. I am running windows 7 ultimate and I have no idea what else to try right now. I noticed that the adapter will work always as long I have start in safe mode, but it's not really very good for everyday use.

  Any ideas would be greatly appreciated.

  Thank you!

  OK I found my own solution, or the moment. I deleted the HP wireless assistant and now he connects very well. Must be some sort of inadequate with the windows wireless somehow.

• 6TO4 ADAPT NETWORK ADAPTER DOESN'T WORK DOES NOT CORRECTLY AND MY DRIVER NVIDIA GEFORCE 7600 COULDNT UPDATE.

  MY LAPTOP PROBLEMS AS SPEED TO MARKET AND TOO SLOW, I'M LEFT TO CHECK THE DIAGNOSTIC TOOLS.IT PROUNE PERFORMANCE FOR ME THAT MY 6TO4 ADAPT IS NOT WORKING AS WELL AS MY PILOT TO UPDATE NVIDIA GEFORCE 7600 COULD NOT... URGENT... I THANK YOUR OBTAINED IF NO SOLUTION... A lot..

  1. you can update your graphics here driver (just answering questions). Download the appropriate file, run it, follow the instructions on the screen, reboot when you are prompted. Check to see if that helps with performance.
  2. http://windows.microsoft.com/en-US/windows-vista/Optimize-Windows-Vista-for-better-performance

• Network adapter wireless Xbox 360 for use in Windows 7 64 bit?

  I had a load of questions to try to locate the driver for the xbox 360 Wireless network adapter to use on my 64-bit windows computer 7. Is there a rare pilot that I've simply not found? or is there something entirely inconsistent with a material more old xbox 360? (The wireless card is USB and was purchased before the new black slim xbox 360 was introduced, back when is is big heavy and white)

  Basically, I want the network card to give me a wireless connection to my router so I can move this PC in another room without the need of an Ethernet cable.

  The XBox 360 Wireless network adapter seems to work only with the corresponding XBox 360 game console.  Microsoft seems to be releasing a Windows driver.

  However, you should be able to find a completely Windows 7 compatible wireless adapter that must be connected to a USB port.

  In addition, you can add an access port 'Wireless' that will add wireless networks to a router not wireless.

• vmotion - box connected network card question is uncheck after vmotion

  Hi all

  I have a strange problem in Cluster DRS / rules of VM, we do vmotion

  After doing vmotion, VM addresses don't not ping, in the first time I think it's trunk network was not good.

  Do vmotion on the source host and not work.

  After checking configuration of the virtual machine, I see that "Connects" network adapter box is not checked.

  The box was check before, because the ping response machine before the vmotion.

  My question is very simple you already have this behavior?

  I use the following script to facilitate the operation.

  Thanks for your help

  Ludovic112

  $pViServer = '< servername > '.

  
  If ($viCon.IsConnected - eq $false - or $viCon.IsConnected - eq $null)
  {
  $ViCred = get-credential
  $viCon = Connect-viServer-Server $pViServer - Credential $viCred

  }
  
  $vmName = "< vmname >.

  
  $maVm = get - vm $vmName

  
  $cluster = get-cluster "< NOMCLUSTER >".
  $Listvmhosts = $cluster | Get-VMHost

  foreach ($vmHost to $Listvmhosts)
  {
  If ($maVm.host.name - eq $$host.name)
  {
  Write-Host "nothing to do" $maVm.host "-" $vmHost.Name
  }
  on the other
  {
  Write-Host 'migrate' $maVm.name 'to' $vmHost.Name
  Move-VM - VM $maVm - Destination $vmHost
  sleep - 60 seconds
  }

  }

  If the connected box gets uncheked after vMotion, looks like the maximum number of ports configured for your vSwitch on your target hosts is exceeded...

  / Rubeck

• Satellite L500-1UU - disconnect the battery when it is connected to the AC adapter / CC

  Hello world

  I have purshaced new Toshiba Satellite L500-1UU
  CPU: Intel (r) Core i3 CPU M330 2.13 GHz
  Physical memory: 4096MB RAM
  Microsoft Windows 7 Home Premium 6.1.7600

  My question is: remove the battery when I use my computer laptop while its connected to the AC adapter would be wise or not? This would increase or decrease the life of the battery, or it will not affect anything?

  Is i3 processors have a technique of centrino disconnect battery power whent, it is fully charged?

  What do you think of this?

  Hi Khaild Essam,

  I agree with Akuma. There is no problem, remove the battery when the AC/DC adapter is connected. If you can do it. In addition the battery charge will be stopped if it s at full charge. The laptop consumes energy to AC/DC adapter only.

  If you remove the battery and work with AC/DC adapter only, the battery life will be improved a little because it s not in its use.

  I found an interesting document for you:
  [How to get the most out of the battery | http://aps2.toshiba-tro.de/kb0/HTD9401AZ0001R01.htm]

• FOJ 8500 909 g will not fully install, not accessible from the computers in home wireless network

  I bought an Officejet Pro 8500 909 g which worked well on our home network for 18 months.  Desktop is 32-bit Windows 7 with a USB cable.  Two wireless devices are 64-bit Windows 7.  Printer suddenly has not recognized the cartridges and frozen with the message "problem with the ink cartridge.  Called HP (unassisted) and tech support of holders of the contract of service - without help.  They sent a refurbished (even) model which I can't install on USB or wireless connection completely.  Yesterday, I was able to print at least one 3 machines on the network (not every machine wireless).  Today, I can not print even the USB device.  5 days lost uninstall then reinstall the printer software, router, etc.  Connected wireless network.  Printer says it is on the wireless network.  HP Solution center is not accessible because the "printer is not completely installed. Help?

  Hi EWQuince,

  The information you have given it seems that the printer is not on the same network as the computer. If the printer was on the same network as the computer, the IP address would be 192.168.1 instead of 192.168.33. You must run the printer Wireless Setup Wizard and make sure that you connect it to a network, the computers are connected. Once you have the printer connected to the same network all your problems should be solved.

  To connect to the wireless network

   

• I am currently using Windows Vista 64-bit and every so often Vista shows that this network adapter is spent in local mode.

  I am currently using windows vista 64-bit and every so often vista shows that this network adapter is spent in local mode

  I did several tests, including
  ping google.com
  to test if it is online and this proves that when its premises in sound mode now online
  I also entered the adpaper of netowrking and disabled so that nothing can turn it off energy saving
  my antivirus is AVG
  AND use zonealarm as my firewall program Please note even with disabled zonelarm it still happens
  can anyone help
  ?
  original title: network adapter shows onffline but it is online

  Hello

  You can try to uninstall and reinstall the network adapter.

  To do this follow these steps:

  1. click on Start, in the Start Search bar type device manager and press enter.

  2. in the list of devices, right-click of the network adapter, and then click on uninstall, if she invites you to completely remove the driver files, click ok to delete.

  3 restart the computer once the uninstall is complete.

  4. after the computer restarts, it will automatically detect and install the drivers.

  5. check if the problem is resolved.

• The network adapter could not establish the connection using the external ip address

  Hi team,

  Please look in the attached files.

  I installed db 11g on my desktop machine (Windows 7, with a local network) and then I created a data source connection in tomcat which was also in the same system and then I deployed my sample web application, everything works fine, I am able to access web applications.

  But once that I kept my system with external IP address (excluding local network of my company), oracle gives these following errors when tomcat start

  Here is the following URL will display the error during the startup of tomcat.

  The network adapter could not establish the connection,

  In these two files, listener and tnsnames ora ora, need to change the configurations if I change the Ip address of the system?

  even I tried my address keeping external Ip instead if host in these two configuration files, yet this does not work.

  any help would be greatly appreciated!

  Thank you.

  Because as I explained - your listener is listening on localhost only. localhost is never accessible to another machine.

  Stop your listener, change the listener.ora to listen to on the real machine name and start the receiver.

  In addition, your tnsnames.ora points to localhost...

  Stop using localhost, unless you only want things to work on the same machine.