Cursor constantly "loading".

Similar Questions

• two other programs to lose control of cursor when loading firefox. Nitro pdf & on display at take-off from the software Center. Help, please

  two other programs to lose control of cursor when loading firefox. Nitro pdf & on screen takeoff on center software. Help, please.

  When I use the programs listed above and firefox is loaded, scrolling through these programs takes me at the edge of the window. I can't scroll 3 lines I can when FF is not loaded. I hate to say it, but FF is certainly the culprit.

  OK, if I may ask, what also happened when Firefox is in Mode safe? That will do this troubleshooting step, is whether this is caused by an add on that you have in your profile. Questions to troubleshoot Firefox in Safe Mode

  Moreover, the fact happen on the touchpad, as well as with an external mouse (if it's a laptop, if not, please ignore)Reset Firefox preferences to troubleshoot and solve problems

  Does this happen with accelerated scrolling on? This setting is in preferences/Options > Advanced Options > general

  Please post back with your results, thank you!

• Cursor constantly jumps around while I'm typing, auto deletes text, etc. - HP Pavilion dv6

  Problem: Cursor constantly jumps around while I'm typing, auto deletes text, etc.

  The changes that caused the problem: Hard drive has failed and replaced

  Model: HP Pavilion dv6

  Windows Edition: Windows 7 Pro OA

  Processor: APU A10 - 4600M with graphics Radeon (tm) HD 2.30 GHz AMD

  Memory: 8.00 GB

  System type: 64-bit operating system

  Feather: No pen or touch input

  Mouse: By Device Manager - mouse Compatible PS/2

  Keyboard: By device - Standard PS/2 keyboard Manager

  Thanks a lot for all the help that can be provided!

  JReid76,

  Try to install this driver Synaptics, let me know if it installs correctly or it fails. It is a specific driver for your touchpad.

  Please answer as soon as possible.

  Thank you

• Any modules or plug ins that I use, I can't getvidoes on Web sites to stream. They are constantly loading and then often showing a few seconds

  OPERATING SYSTEM. Windows 7 (X 64), FF38.0.1. Windows Media Player. I downloaded media Player for You Tube videos; Download video help. Simple video player you Tube HTML; You Tube Flash video Player. Yet I'm not able to play a video from any website that broadcasts continuously. Constantly, it is loading, showing a few seconds of the video and then load it again. I realize that somewhere in my set up of this aid, I'm missing something important. The fact that you are in 70 years and not too familiar with all of these technical tricks makes sometimes very frustrating.
  Please help either by proposing a plan of action or a link where I can learn to do it properly.
  Thank you
  Robert

  This site is what is happening other than Youtube?

  If it's just that the site and that you have successfully installed all of them please restart Firefox and go to the page.
  If you have not yet tried the flash, here are the instructions how to do this:

  • Install the Flash plugin to display videos, animations and games

  The other player supported is the HTML5 player, who should take the lead by default.

  Given that it is giving questions I could just try to update your drivers:

  • Update your graphics drivers to use hardware acceleration and WebGL

• Since upgradring this morning that my cursor constantly blinks or disappears

  I've updated Firefox this morning for the 'best' and the cursor flashes constantly or disappears when I move to another item on the screen. VERY ANNOYING! How can I do to return to the last Firefox I had and cancel this one?

  Press F7.

  http://KB.mozillazine.org/accessibility.browsewithcaret

• After a night charging, Sansa Fuze + TRAVELS constantly "loading" graphic

  I plug it at bedtime and in the morning, I observed the "Electro-lock" icon on the Green battery logo, which indicates a charge complete. I unplug the unit, and, as you know, it goes to icon clover four leaf-color sansa, exploding in the pixelated "Sansa" start-up welcome - as usual.

  But... He... just... continues to repeat! Constantly.

  I called technical support. A manual firmware update has allowed a normal startup. Great!

  BUT it happened again today after a refill at night.

  I had to redo the firmware update so that it can boot normally.

  And here's the trigger: THE BATTERY is not YET COMPLETELY CHARGED even if she spent all night plugged. It shows only half a charge.

  SanDisk, please help.

  ianbt7,
  

  
  

  I have reviewed your problem and I agree with you. The correct troubleshooting steps did not. I arranged to have a level 2 support Technion contact you.

  
  

  The Forum Admin

  slotmonsta

• Firefox has constantly loads with the message "This is awkward", but it is not crashing in advance? How can I fix it

  My problem started yesterday and I can't seem to fix the problem. Everytime I open firefox I am met with the annoying message of restoration, (it is usually boring, but because it happens every time I start firefox it really starts to bother me) even if I close all my tabs before hand, close firefox and then quit the program entirely. I can understand what happens if say that I force quit when I open tabs, but I'm not. And that too, has never been a problem before.

  I use Firefox 20.0 on my Mac, running 10.7.5 (Lion).

  I tried to uninstall/reinstall firefox.
  I also deleted the sessionstore.bak and .js files. This fix works first, the first time I open firefox, but did not subsequently.

  Also, I would rather not completely turn off restore, if possible, because I might actually need to get my data at any given time.

  I have three extensions on my browser: greasemonkey, Savior and Adblock tumblr more. Since I bought my computer 2 years ago, I had ABP on my browser. Greasemonkey and Savior of Tumblr I downloaded last night after this problem had already occurred.

  A possible cause can be that you first close all Firefox Windows and then close the Firefox application.

  Some noted that closing of Firefox (Firefox > Quit) while the browser window is always open works for them.

• ID ID - sig - 4.1 - 4 - S92.rpm.pkg of loading constantly

  Hello

  I noticed a strange behavior of 4235 IDS:

  I've got automatic updating before and it works great.

  Is check the directory signature on my FTP server every hour and looking for new .pkg files.

  When a new .pkg file is found, it is loaded correctly.

  But whenever there is not a new .pkg file in the directory, my ID charges IDS - GIS - 4.1 - 4 - S92.rpm.pkg file.

  SH ver command shows a correct (last signature, 4,0000 S125 currently) running on the IDS.

  So why is he constantly loading the file ID - sig - 4.1 - 4 - S92.rpm.pkg?

  Thank you

  Milan

  This a known issue.

  The problem occurs because the sensor one alphanumeric instead of strictly digital control over the names of the files.

  S92 is superior to S125 when looked at the character by character 9 is greater than 1.

  This will be fixed in a future version of sensor.

  The solution is meanwhile simply remove your S92 through updates of signature S99 of your directory to update.

  NOTE: The 4,0000 S91 Service Pack file can remain in your directory to update, because the service pack (sp) - files are treated differently that signature updates and should not have this problem.

• Installation of HP printers makes my cursor crazy

  I have a PhotoSmart 6510 and a new Officejet 8600, and after their installation, my cursor constantly gives me the circle "loading". It is extremely annlying and seems to have slowed my laptop. I'm so fed up I uninstalled both printers and my cursor is now very well. Any body knows why this happens and RAS is the solution? This never happened with my old Officejet 8500 a.

  Hello

  I assume that you have installed the software from the CD? Please correct me I f I'm wrong.

  It is a known issue with some version of the previous software that are resolved by the latest version of the software, you can find the following as a reference document:

  http://support.HP.com/us-en/document/c03191239

  Uninstalling the software to uninstall following under all programs > HP > model of the printer folder and install the latest version of the software should solve.

  You can download the latest version of the software for your printer from the links below:

  Photosmart 6510:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-108880-3&cc=us&DLC=en&LC=en&OS=4062&product=5058336&sw_lang=

  OfficeJet Pro 8600:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-108858-3&cc=us&DLC=en&LC=en&OS=4062&product=4323659&sw_lang=

  Shlomi

• A lot of Sims 2 Double Deluxe community never stop loading

  In the Sims 2 Double Deluxe, when I try to open a large number of community or move in a family, the lot is constantly loading and never stops.  He could stay there for a whole day and the loading screen would always be there.

  Hello crazycfm,

  Thank you for your response.  You can check that the game is fully patched or completely updated. To do this, you can check with the program provider directly to check the updates available for the game.  You can also verify that your video card drivers are updated and then check the issue.

  For more information on the updating of a device driver, see the link below:

  http://support.Microsoft.com/kb/283658

  I hope this information is useful.

  Thank you

• Stuck on front screen loading connection

  Hey all,.

  This isn't a laptop of mine problem, they're my brothers.
  Of course, I will explain what it is doing (or rather not do) and then I've done etc.

  Basically, he had a worm that as soon as you connected, you couldn't do anything because it would popup, and then restart the laptop, instantly showing the 'blue screen '. I went into safe mode and managed to get to the system restore, did, he disappeared and everything was fine.

  I then installed a new windows update: Service Pack 2. I restarted the laptop and since then, when it gets to the loading bar that says "© Microsoft Corporation" below, just at this time, but constantly load (the loading bar animation continues, it does not freeze upwards). So, it doesn't get to the login screen.

  I rebooted several times and tried the Safe Mode, Safe Mode with command prompt, last known good Config. (Advanced), repair of Windows. I tried all the other options I have no idea how use. Since all the I can't require you to go beyond the loading screen to start the 'work', it's boring.

  I have not tried the options "F10" or "F2", because they are confused that _ and I have no idea what I'm doing with those.

  I'm not sure if the problem is caused by the update, or if it's even the worm, but I'm sure that's not the worm. I could be wrong of course.

  It doesn't have a disc of Windows (Vista) so I can't just simply re - install.
  No idea why he did not drive, perhaps because Vista was preinstalled?
  It is a true copy because the laptop was purchased new.

  If anyone can help, please do. Your efforts are GREATLY appreciated.
  

  Hello

  It may be because of an installation damaged Service Pack 2 or due to the virus. We will ask you a Windows Vista disc to fix the problem.

  As you mentioned, you do not have a Windows Vista installation disc, I suggest you organize a Windows Vista installation disc that fits the same edition and the version installed on your machine.

  Subsequently, restore the system to the Windows recovery environment and verify if you are able to boot to the desktop. Follow the steps in this link to boot into the Windows recovery environment and select the system restore option.

  Note: when you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  Repairs to the system of Windows recovery environment

  Hope the helps of information. Please post back and we do know.
  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My Illustrator began "refreshing" constantly

  It seems as if the program is not active every second. The index I is the slider, which keeps switching between regular active tool in illustrator and the windows cursor with loading circle.

  I can´t use no matter what menu top of the window or click options, right closes after clicking on it.

  Tried to restart and uninstall, the two were not working.

  How to deal with this? It happens to someone else?

  Hi man,

  Have you installed any bank security software called "Warsaw"? If so, please uninstall, and then check.

  Thank you

  OM

• During the first loading of Adobe Story more, what do you do if the program loads at all times throughout the day without opening?

  When I open Adobe Story, he constantly load without opening... What should I do to fix this?

  Turns out that I signed in on another computer and it didn't. So to get more Story to work on the computer I was on, I first have to disconnect from the other computer.

• PL/SQL cursor the current of location update

  I try to use a cursor to load a query with a join of multi and then use the location being updated each result, but his does not work. It runs extremely fast (in way too fast to actually do something) and when I select the field I expect is updated I can't find updates.
  
  So it's something like this:
  
  cursor my_cur is
  Select A.ID as AID, B.ID as QUOTES
  OF A, B, C
  WHERE... complicated join on tables 3
  Update;
  Start
  for r loop my_cur
  update a fixed PROSTHESIS = OFFERS the location being my_cur;
  end loop;
  commit;
  end;
  
  No idea why it wouldn't work? I'm totally inexperienced with pl/sql, so I don't know I missed something trivial or completely wrong understood something!
  
  Might it have to do with my "join complicated on the 3 tables?

  Trant says:

  And it works very well.

  Oops, current rate. You cannot use the CURRENT OF clause with a cursor declared with a join * since internally, the CURRENT mechanism uses the virtual ROWID and there is no way to specify the ROWID of the table that relates to:

  SQL> DECLARE
    2     v_sal NUMBER(8,2);
    3     CURSOR c1 IS SELECT sal FROM emp e,dept d where e.deptno = d.deptno FOR UPDATE;
    4  BEGIN
    5     OPEN c1;
    6     LOOP
    7        FETCH c1 INTO v_sal;
    8        UPDATE emp SET sal = sal * 1.02 WHERE CURRENT OF c1;
    9        EXIT WHEN c1%NOTFOUND;
   10     END LOOP;
   11  END;
   12  /
  DECLARE
  *
  ERROR at line 1:
  ORA-01410: invalid ROWID
  ORA-06512: at line 8
  
  SQL> 
  

  If something does not match. In all cases, you must add A.ROWID to the cursor and use it in the update:

  SQL> DECLARE
    2     v_sal NUMBER(8,2);
    3     v_rid rowid;
    4     CURSOR c1 IS SELECT sal,e.rowid FROM emp e,dept d where e.deptno = d.deptno FOR UPDATE;
    5  BEGIN
    6     OPEN c1;
    7     LOOP
    8        FETCH c1 INTO v_sal,v_rid;
    9        UPDATE emp SET sal = sal * 1.02 WHERE rowid = v_rid;
   10        EXIT WHEN c1%NOTFOUND;
   11     END LOOP;
   12  END;
   13  /
  
  PL/SQL procedure successfully completed.
  
  SQL> 
  

  SY.

• Touchpad ES1 - too sensitive 111 M

  I just bought an ES1 - 111 M (win8.1) and the touchpad, it is almost unusable.

  The problem is not the cursur speed, the problem is the pressure sensitivity. That is when you move the slider autour, I constantly accidentally click, drag and drop or multiple selection.

  Is it possible to change this sensitivity (not the speed of the cursor), or load an old driver so that it behaves like an old generic touchpad 'no precision' (which I usually turn off the tapping/gestures and click on using the integrated touchpad buttons).

  Torbjörn

  I have provided service under warranty. They repaced the touchpad and now it behaves as I expect that a tablet should behave. Problem solved.