Cursor jumps after automatic update of Windows

Similar Questions

• Pavilion 15-243cl after automatic update of windows 8.1 I get a black screen after the home page.

  recently installed an automatic update of windows 8.1. Now, I get a black screen after the home page. I can load the Task Manager and access the internet. tried to go to the SafeMode to start with f8, but several attempts failed. I updated my graphics driver from AMD today and same black screen. I've also restored sytem to an earlier date using the HP utility with results screen - black even after the home page.

  Hello

  Try the following.

  Boot the computer normally and log.

  Black screen, old the ctrl and alt keys and press delete.

  Select Task Manager.

  Click on file and select the new task.

  Type rstrui - also enter a tick in the box for "create this task with administrative privileges" - and click on Ok.

  When the system restore interface is loaded, choose a restore point at least 48 hours before the opening of session question (IE before the last batch of Windows updates have been applied) occurred initially and then proceed to the system restore.

  Kind regards

  DP - K

• Sound/audio does not work after automatic update of Windows 8 for the July 12, 2014

  Solving audio problems do not detect a problem.

  When I go to the control panel > hardware & sound > playback, right-click on the device, I get this message:

  "This device is used by another application. Please close all devices... "

  However, I restarted the laptop with no other applications running and I still get the above message.

  It must be linked to the recent update of W8 for 2 days ago that my audio has always worked fine until here. Without having to reinstall all the software, what I can do, as I have not changed anything other than subscribe to automatic update of Windows? (It makes me want to stop the update btw, if the updates affect the normal performance of my laptop).

  A new update for Windows 8 rises to fix this audio problem?

  Welcome to any other measure to solve the problem? -Many thanks.

  It worked for me, you can't find it on your hard drive, you must go to > Control Panel > programs > programs and features-> installed updates. under the microsoft windows list, locate those added on July 12, 2014. RightClick > uninstall the "update for Microsoft Windows (KB2962407)" (let others, simply uninstall it) it invite you to reboot, and you should have sound after reboot. "

  hope this helps, I did not half an hour.

• After going into sleep mode after automatic update of Windows 7, Pavilion p6210y PC won't sleep

  In two weeks, after an update of HP launched automatically, my monitor is not recognized - I tried to restart my PC via the power button, but the action brought everything back without interruption to the place.  Finally I made the necessary update HP closed down and all was back to normal.  Last night I made a full stop and a Windows 7 launched updates (do not turn off your computer, etc..).  This morning when I powered back upward, I got messages on the windows during Setup, etc, then everything returned normally.  I worked for a few hours and left the machine - it entered into mode 'sleep' and now I can't get out of fashion "Eve".  If I power cycle the monitor, I can messages same "cannot detect.  If I try to shut down the PC via the power button, the light is orange/sleep, I hear a humming, then seeing if off, then back to orange/snoring, reverse, etc..  Keeps the bike like this.  I'm afraid that question a couple of weeks may have been a sign of early warning of a problem of h/w, but am not sure.  Can anyone help?  I am not very savvy h/w... and hope that it is something more simple than that.  The PC is 2.5 years.

  Your need to deactivate "standby" as soon as POSSIBLE to determine what is happening. You have 2 numbers because your motherboard is the infamous M2N78 - LA.

  That hum maybe the CPU fan:http://h30434.www3.hp.com/t5/Other-Desktop-PC-questions/To-all-with-M2N78-LA-CPU-fan-constantly-changing-speed/td-p/704265

  The other issue is more complex. Overheating the Nvidia chip. This chip share logic and circuits with the SATA hard drive controller and the graphics port. http://h30434.www3.HP.com/T5/desktop-hardware/m8530f-desktop-PC-with-a-M2N78-la-mother-board-doesn-t-see-my/TD-p/181716

  Your need to read each section and each answer. I suggest you save and move forward with all the measures that you feel is of advantage.

• USB ports does not work after automatic update in Windows 8.

  Hello

  There was an automatic update that occurred a few nights ago on my computer that I never knew until after that I turned on my computer back the next day. The computer starts up, then stopped and restarted about twice more - a total of three reboots in all.
  It is really annoying, because my Bluetooth has also stopped working a few days before. So I'm completely paralyzed - I've been using USB keyboard and mouse since the Bluetooth went bankrupt. I can not connect.
  The computer starts as usual. The 'numlock' keyboard lights, like the optical light under the mouse; This happens just before the Windows loading screen. However once windows loading screen comes and the "pearls" downstairs begin circulating, the mouse and the keyboard go quiet. I am sure that there is no hardware problems, and the keyboard and mouse work on my Mac very well.
  I tried system restore and PC options refresh on the Startup Options page, but unfortunately, my hard drive is unlocked, and system restore won't work; It says that I need to specify which Windows Installation to restore. I also tried my options with the Windows CD.
  Do a complete restore of the system is not really something I want or feel that I can do. Being the sidenote, I have school work on this machine in question, and it was already over. Otherwise, I would have not had any problems.
  Anyone had this problem before?

  Hi, I just have this problem, but I have noticed that the driver has been disabled, when I activated, it works fine now.

• Vista Home Premium Reboot Loop after automatic update of Windows

  I have a Compaq Presario F700.  We have recently installed Norton, set, and automatic updates Windows automatic backup options.  I have the system restore points all.  When you try to start the system goes to the Windows Error Recovery window.  If I choose Safe mode or safe mode with networking, the system reboots automatically.  When this happens, it load all the way to my connection profile.  There are two profiles (protected by password) on the computer, but both are administrator accounts.  When I connect each profile, the computer stops and automatically restarts (constantly).  I tried to do a restore of the system from the command prompt and of the recovery tool.  I tried repairing the windows system as well.  I went into the advanced boot options and tried several of them.  Any suggestions?  What is a virus or a windows update problem?

  Hello

  You can use the solutions in this ko - 4 methods and I have listed some help for them below

  The update is not installed successfully, you receive a message, and the computer restarts
  When you try to install an update in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/949358

  Method 1: start Windows Vista/Windows 7 with the Windows installation media, and then
  Use the repair feature

  How to do a startup repair in Vista and Windows 7
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to Access Options recovery if you
  have at their disposal, or use the DVD as described above.

  This tells you how to access the system - Vista Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  This tells you how to access the system - Windows 7 Recovery Options
  http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

  Try recovery options Startup Repair

  How to make a startup (Vista) repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  Method 2: start the system in safe mode and then use the system restore feature

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  You can also do a restore of the system of starting with a disk of Vista or Windows 7.

  Method 3: use the downloads at the end of this article - note versions for Vista x 86 32 bit
  and x 64 Vista 64-bit.

  The update is not installed successfully, you receive a message, and the computer restarts
  When you try to install an update in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/949358

  Method 4:

  At the command prompt or Recovery Options or a Vista disk boot

  Type or copy and paste these in one at a time (not press ENTER)

  c:windows\winsxs\ in the commandprompt
  Press ENTER

  DIR pending.*
  Press ENTER and you should see the pending.xml

  Ren pending.xml pending.old
  Press ENTER.

  -------------------------------------------

  It's the most complete method 4

  Use the Vista startup disk or system recovery options to rename the Pending.xml file and
  Edit the registry:

  In the System Recovery Options page, click command prompt.

  Type cd C:\windows\winsxs, and then press ENTER.

  Type ren pending.xml pending.old, and then press ENTER.

  Type regedit and press ENTER.

  Select HKEY_LOCAL_MACHINE.

  On the file menu, click on load the hive.

  Look for the following folder:

  C:\windows\system32\config\components

  When you are prompted for a name, type Offline_Components.

  In the registry editor, locate and then delete the following registry
  subkey:

  HLKM\Offline Components\AdvancedInstallersNeedResolving

  HKLM\Offline Components\PendingXmlIdentifier

  Exit the Registry Editor:

  At the command prompt, type exit to quit the registry editor.

  Press ENTER.

  Restart the system

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  Hope this helps sort it out for you.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Sudden appearance of error STOP C000021A after automatic update of Windows

  Everyone knows a sudden STOP errors after that update Microsoft has done for his actions in the background? I'm setting up a SL500 for a client who has crashed all of a sudden with a STOP C000021A error. This error number (and the minidump file) point about csrss.exe crashing. The machine is no longer usable in 'normal' mode but it does not start in "safe" mode A review of the microsoft update log file reports the accident happening right after that the update ran. Before I nuke XP and opt for a restore to factory (as well as reinstall/configuration) I would like to know if others have seen this happen recently.

  In response to my own question here: I managed to do that work again. It turns out that the automatic update is more or less malware Microsoft's "Office Genuine Advantage". Remember, once again, why people accept this type of behavior of a business entity... No, not only to accept but reward in continuing to do business with them. Something in the water maybe?

• Windows 7 change language after automatic update

  Dear Sir/Madam,

  I had windows 7 Home premium and using the English language page layout. However, he changes Portuguese after automatic update of windows. This is very disturbing, and it happened twice. I have a reinstall the windows the first time and won't do it again. What can I do other than upgrading to ultimate?

  Thank you!

  Kind regards

  Wil

  Take it back to the retailer under your warranty. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• problem with windows mail (using Vista) after automatic updates installed

  After the installation of the automatic update of windows I can't receive or send email on windows Messaging.  Get the box asking username and password and when I did, he asked again.  Have checked all the settings and they are as before the problem started. Is there a problem of backward compatibility with one of the windows updates?  I can access my email on the site, so is not their problem but with my computer.

  Hello

  Try the following methods:

  Method 1:

  Try to download and reinstall Windows Mail using the link:

  http://support.Microsoft.com/kb/941090

  In the link above, go to download and install the update.

  Method 2:

  Solve problems with Windows Mail

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail

  Reference:

  Working with Windows Mail in Windows Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/working-with-Windows-Mail

• After an automatic update of Windows and stop, Firefox does not remember my tabs open at startup. Better Privacy does interfere with Crash Recovery somehow?

  Better Privacy does interfere with Crash Recovery somehow? My computer is automatically installed a Windows Update at 03:00 and switch off. When I started out, I had to restart Firefox. Firefox came without any of the tabs that were open when the PC went to bed the previous night. I spent an hour looking for what happened to my tabs, without success.

  This has happened

  Just once or twice

  == Automatic update of Windows shut down my computer in the middle of the night.

  Hello.

  It is possible that it was by force the windows closed so your firefox which makes you forget... Have you tried to crash your Firefox to see if the session is not restored?

  To plant your Firefox, simply there open, press CTRL + SHIFT + ESC and then, on the process tab in the window that appears, complete the process firefox.exe. That will force Firefox to close at this moment. Do start again. If it works, ok, so it may have been a case isolate. My recommendation is to configure your windows does not install updates without your intervention. Choose something like 'ask me what to do' or something like that.

• "Database corrupt installation" - discovered after failures repeat the installation of automatic updates of Windows

  We're running out of WinXP SP3.  Apparently, we are unable to install/uninstall anything correctly.  I think it may have something to do with "a basic installation damaged."  I got this error when trying to manually install KB972581 (a security update for 2007 Microsoft Office System).  This could have been caused by running the Windows Installer cleanup utility, I didn't have problems with Office 2007.  We were informed at all by continuing to upgrade with another program issues.

  We daily use Outlook 2007.  Multiple users, so we can't delete it.

  Same thing with KB970895 (update of security for SQL Server 2005 Service Pack 2) - another failure with the description of the error "Unable to install Windows Installer MSP file".

  Basically, the automatic updates of Windows always fail.  Comprehensive research of these forums, I found and ran the Microsoft FixIt! # 50202, without result.

  How can I fix anything that makes things installation fails?

  I had a similar problem - resolved two things actually. First make sure yu have the latest windows installer engine. Then download the package fails and run interactive mode. This will give you the 'real' error which causes the failure so that you can correct it.

  In my case it was a dependency on another file system that was resolved by running sfc/scannow - it's maybe not the question you... once again, run the full installation package and also to enablehttp://support.microsoft.com/kb/223300 logging to track down issues...

• Automatic update of Windows on the server

  Hi guys

  My application software installed on the server of Windows running on Windows server 2008 does not work properly due to the automatic update of Windows. My client application times does not and when the server he invites me to reboot by displaying the server because of the recent software update.

  I asked my team to set Windows Update to manually plan but they advised me that this is a policy and it should be run as automatic.

  After restarting the server, the application works normally.

  What should I do to run smoothly even after the Windows update without restarting the server.

  Please post your query to:

  https://social.technet.Microsoft.com/forums/

  Server issues are better addressed there.

• Too small display after automatic updates

  Display too small
  After an automatic update of windows, my computer rebooted and all about
  the monitor has shrunk down, including the toolbar, the sidebar, the mouse.
  Internet explore and anything else. I put it to resolutionAny 1208 x 1024
  recommendations for everything back to normal size?
  Thank you

  [Duplicate of http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/2518be0a-93f8-4a47-a00e-90773d76c6fa] ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I bought a new laptop with Windows 7 installed. Whenever I restart it, it has installed updates which can take up to an hour or freezes. You can ignore the automatic updates of Windows 7?

  I bought a new laptop with Windows 7 installed.  Whenever I restart it, it has installed updates which can take up to an hour or freezes.  You can ignore the automatic updates of Windows 7?

  You can turn off the automatic updates, Yes, but doing so would leave your computer at risk. Simply put with him: after another reboot or two, you will be fully patched AND fix!

  Install the Windows updates:
  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  Update your computer:
  http://Windows.Microsoft.com/en-us/Windows7/updating-your-computer

  Understand the Windows automatic update:
  http://Windows.Microsoft.com/en-us/Windows7/Understanding-Windows-automatic-updating

  Updates: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/updates-frequently-asked-questions

  Change how Windows installs or notifies you of updates:
  http://Windows.Microsoft.com/en-us/Windows7/change-how-Windows-installs-or-notifies-you-about-updates ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• error message: automatic updates of Windows to 0 x 80070424 does not illuminate

  Automatic updates of Windows won't turn on. I get the error code. : 0 x 80070424

  Suggest that you first spread malware as the cause of the problem by following these steps:

  (1) have your system scanned by the antivirus/security suite installed.
  (2) run this tool from Kaspersky: how to remove malware belonging to the family Rootkit.Win32.TDSS

  http://support.Kaspersky.com/viruses/solutions?QID=208280684>
  (3) download, install, update and run full scans with two of these tools free anti-malware:

  MalwareBytes AntiMalware

  http://www.Malwarebytes.org/products/malwarebytes_free>

  SUPERAntiSpyware

  http://SUPERAntiSpyware.com/superantispywarefreevspro.html>

  (4) run the Windows XP and Windows Server 2003 System File Checker (Sfc.exe) tool:

  http://support.Microsoft.com/kb/310747>

  `~`

  If no malware has been detected, there's a Fixit on this page which will reset the Windows Update components:

  How to reset Windows Update http://support.microsoft.com/kb/971058components >

  Suggest you download and Save it. Then, close all the open programs and web browsers.
  Run Microsoft Fixit 50202.msi and choose its default mode.
  After that he finished the race, see if the return code is displayed again when looking for updates.

  If not, then run the Fixit once more and choose his Aggressive mode.
  Restart once it is finished and see if the return code always appears when the updates.

  IF malware is detected, then please post if it has been removed and that the specific name of what has been detected.

  Please let us know if it did or did not help to solve your problem.

  If this ANSWER helped, my post as ANSWER of marking close your thread.

  07/05 / 1101:31:04