cursor or erratic behavior

Similar Questions

• Erratic behavior of the keyboard of a Satellite R830

  I can't use my portatil to write because the keyboard has an erratic behavior. When you are writing it jumps to different positions on the line.

  No doubt, it can be solved install drivers again, but I'm not an expert, then someone can help with this.

  ARO

  Hello

  Disable Touchpad while writing and using the keyboard.
  I had the same problem in the past.
  Finally, I noticed that I touched the surface of touchpad accidentally while typing and this is the reason why the cursor jumped around.

• Re: Erratic behavior on Satellite M40X

  Hello

  Very often but not always, when I start the laptop (Satellite M40X - 186 Windows XP SP3), after a while, the Windows Media Player popup window. I got close but it reappears etc... also very often, there's erratic behavior: the keyboard is unusable or the letter etc. which appears on the screen is not bound to the key... or the cursor moves in an irrational way.
  I scanned all the files from virus (Avast tool) I reinstalled XP, updated the ATI driver... but this does not appear to have solved the problem.

  No idea what is the cause of this failure?
  Thanks if you can help

  When you start your laptop computer and enter the BIOS settings, you can use keyboard and go to settings?

• The cursor moves erratically even when no mouse connected

  I've had the problem for over a year now, but I never received tour to report. From time to time, my cursor moves erratic around the screen, jumping from position every few seconds. I have a MBP, but often use it plugged on a screen and mouse etc with the lid closed. The problem persists if Setup like that, even when the external mouse is disconnected, or when simply use it as a laptop. I recently wiped the hard drive and reinstalled a clean copy of Mac OS x from zero (no backup), but the problem still persists.

  Any ideas?

  Looks like a hardware problem. How old is this MBP? Sometimes, when they get older, the battery may start to inflate and put pressure on the trackpad.

• Erratic behavior CBWMS view code with code disappears

  This just started today: behavior seen very erratic code with the code disappears.

  As I am writing code, or by selecting the code, he suddenly disappears. Sometimes portions of code disappears and shows a small section that is stressed.

  If I select a photo in design mode, it can also disappear.

  I tried reinstalling Dreamweaver, deleted the Setup folder, preferences removed, but seems to come back.

  Has anyone seen this type of erratic behavior before?

  Here is an example of the strange underlined text (under 'c'):

  

  If I select an underlined letter and keep typing, it continues the line in mode code like this:

  

  Once this emphasis indicates somewhere, this is the beginning of other erratic behaviors such as images or code disappears suddenly, etc..

  It started to happen after upgrading creative cloud today.

  Try to turn off dictation & speech recognition in your system settings.

  Nancy O.

• Erratic behavior of nod to the page

  When you scroll a PDF format article (updated to align with the page) is often some beavior erratic screen near the edge of the page. I hope that the behavior of the snap, but often the screen "wiggles" and changing position (only in the order of a few pixels) but obviously this isn't the desired behavior.

  This has something to do with what is discussed here?: http://forums.Adobe.com/message/4726426#4726426

  Mark Kunoff

  Information systems specialist

  Communications UI

  University of Indiana of public affairs and Government Relations

  It is a known problem in the v22 Viewer. It resolved in v23, with the case of the exception mentioned in the link above (a MSO is active when the user tries to scroll).

  Unless you have customized your own Adobe Content Viewer by using your Pro account or business, you will not see the fix until Apple approves the content viewer Adobe in the iTunes store.

  Neil

• Erratic behavior of the mouse on the Qosmio DX730

  I recently purchased a Qosmio DX730 and the wireless mouse behaves erratically. He jumps on the screen and is just about manageable for basic use, but practically useless for any detail as the manipulation of graphics work. This is no program related to special, it happens with all the software and windows desktop. Things I've tried but it does not solve the problem;
  1. the batteries and resynchronization would have changed
  2A spoke with toshiba helpline, uninstalled all the drivers and reinstalled
  3. search for updated drivers (no)
  4. tool Keyboard wireless, mouse and transceiver to the store and exchanged - go always the problem
  The wireless keyboard works fine

  I was wondering if I was getting some wireless interference but have disabled all devices electrical and electronic local = no difference. I am reluctant to give up everything and go to a plug in mouse because it's brand new. Any help appreciated.

  Hello

  You used the mouse WLan but have you tested the feature with a USB mouse?
  I recommend doing this to check if he s really a computer problem.

• Portege M780-102 cursor jumps erratically around while typing

  Just got my new Portege 780-102.
  But irregularly, the cursor jumps around when typing in any application.
  (.. .and no, this isn't my sleeve brushing the mouse pad)

  Search the Web...
  Seems that Toshiba portable computers have a bit of a history with this type of problem .

  There is a suggestion that I have to re - charge the pack of bluetooth applications.
  Try to talk to Toshiba tech.support in the United Kingdom, but they are on a holiday.

  Has anyone else had the same problem and have you known the problem solutions?

  Thanks a mill! Katie x

  Hi mate

  I read on this issue of cursor on the different laptop models (from different manufacturers).
  But in most cases, the users didn't note that the touchpad was accidentally while typing of touchpad.
  You said you checked this hmm but in any case, try to disable the touchpad while typing just for test purposes

  In addition, some have said that the BIOS update can also be useful
  So if the most recent BIOS is available, updated it!

• Re: Mouse cursor moving erratically and even moves its own

  Hello. I hope you can help.

  I have a Toshiba Satellite U500, less than a year and I have real problems with mouse cursor move where he wants, when he wants, even when my hands are away from the laptop. I ran every virus/trojan/software malware scan and there is no problem. Tapping is disabled and sensity etc. levels are low. I use Windows 7 and there is no problems until the last two days (apart from an occasional hour or two the same thing a few months ago.

  Oh and I don't have an external mouse. only the Toshiba integrated one. Any ideas? He made work very difficult.

  Thank you very much.

  Hello

  try updating the driver for the touchpad:

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  To be honest, I do not know what you suggest again that you have already scanned for viruses, disabled tapping, sensity levels. As it is the last hope to reinstall the operating system itself with a recovery disk

• After Windows Update, is now silent erratic speaker (flickers power button) and sometimes erratic behavior of the mouse

  I noticed a few days after the restart after an update of Windows (a few weeks of updates at the same time evidence) on my old laptop Dell M60 when I hit the mute button would begin just flashing power continuously, but there is ore that turned off.  I restarted and it has always given this behavior, so I turned off the laptop and decided to watch it later.  Today, I had a friend send me an email on their desktop PC indicating that they have the same problem.

  Does anyone else know this? Identified/fixed?

  Hello

  Download the latest sound/audio driver and if not more recent re - install the same. Please use the instruction manual
  as we explain.

  Control Panel - device - SOUNDS - look for HD Audio Manager - Mine said RealTek High Definition Audio

  Make sure you write down the description and model double click top - tab drivers - write version. Now
  Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
  CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.

  1. go to the system manufacturer's website and search for the driver the newest download - SAVE - will click with the button straight on and RUN AS ADMIN
  (This is your rescue.) REBOOT after each installation of driver.

  NOTE: Driver Sound often rollback so check the version after installation and reboot to see if the version you
  installed is there, if not repeat - restart until it is. It may take several tries depending on the recommitments how he
  the fact.

  Then do the same for the site of the manufacturer of the device.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• the cursor moves erratically

  Likewise, no need to be connected, the cursor is nervous and travelling all the time on the rise.

  XPSP3, Dell745

  have you tried several optical mice, different surfaces/mouse mat, update the bios to 2.6.4 site Dell Web, updated the driver to A03 of the site Web of Dell and evenremoved then started the mouse computer mouse, and always the cursor appears and is unstable and moving upwards

  the main user States that the first thing in the morning, when the computer is turned off, it is correct, but worsens with the day that passes; I couldn't see no stability to the slider, but I did not let the computer for hours...

  don't see a problem with the southbridge chip capacitors or anything else on the motherboard

  someone has something to try?

  Hello

  Looks like a hardware problem, possibly Associates, heat, even if the malicious software could be the problem
  (worth a visit).

  Check with Dell Support, their documentation online, and their forums for known issues.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  =========================================================

  Are specifically looking for this rootkit:

  TDSS Rootkit
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  And other malicious software:

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  New Vista and Windows 7 version
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Original version
  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Cursor moving erratically on Sony viao running Windows 7 laptop

  Hello

  Really frustrating that when you type cursor and part words move randomly. See we talked a lot about this common problem, including the button next to the cover with a piece of cardboard! also downloaded 'touchpad' disaster and had to remove it.

  Any help to fix this would be greatly appreciated?

  Thank you

  Kris

  Hello Kris,

  The easiest way is to disable the touchpad entirely. If your laptop is not a touchpad applet in Control Panel, go to the mouse properties in Control Panel. Opens and there will be a tab for the touchpad. There should also be a checkbox to 'Disable touchpad when an external mouse is connected', in this way, you keep the touchpad when you have an external mouse and lose it when you.

  Alternatively, or in some cases particularly stubborn, you can also go to the Device Manager (in Control Panel) and disable the touchpad there. It will be located under the mouse or HID (Human Interface Device); Make sure you turn it off and do not try to uninstall it, because it will resettle the next time that you start your computer.

  If you do not want to disable or use an external mouse, you can try to set the sensitivity of the touchpad corners where your thumbs are probably hit (assuming that you have this feature on your laptop), but it of a little problematic and does not work as well as get rid of the touchpad altogether.

  I hope this helps, let me know how make you out.

  Kind regards

  BearPup

• On-screen text is faded-unintelligible, audio playback is corrupt and the mouse cursor freezes erratically?

  Hello

  Suspecting a severe virus attack, I reinstalled my O.S. Win7x32.  I see now several faults, I.e. the mouse cursor freezes, corrupted - the text to audio playback screen is faded and illegible in places?

  Any help would be greatly appreciated.

  Thank you in advance,

  John B.

  Sorry, but, all that said... FAILURE OF THE MOTHERBOARD!

• The cursor moves erratically while I'm typing

  With Windows 7, the cursor moves while I type in email, Word ais nd th same ias (this is an example of my problem).  Even as I typed this, thersor cu

  the cursor jumps back to this line and the line above.  Very frustrating!    Problem is in Windows 7 to purchase; correction was made when I bought in January 2010.

  Have reconstitute last month and the problem reappeared.  Can't seem to fix. ;

  This unit has a cushion of tack Synaptics, and there is a setting in the drivers called "Palm Check" or something similar. Check it tells, basically, the touch pad to try to detect when it is your Palm (in typiing) compared to a finger.

• Erratic behavior with puppets more complicated?

  Hi all

  Has anyone else experience some behaviors of random when you draw a puppet more complicated? I'm working now on one, it was looking and works very well, and then I moved an arm in illustrator. Returned to CA, and the Chief had jumped off in space.

  Character animator also appears, uncheck the box "Stand-alone Warp" whenever you update the puppet in illustrator, is there a way to keep? (Or I think better to use the '+' in the original?).

  Here's the head issue I mentioned:

  

  Thanks for the file. I was able to repro in Preview 1, but it moves is no longer the head in Preview 2. (You don't even need move a layer - just switch the visibility of a layer on or off always caused the problem before). Of course, it will always reset Warp independently and tie it to setting, so you'll always want to change the name of the head layer to:

  + head {attachTo = "Neck"}