Erratic behavior with puppets more complicated?

Similar Questions

• Need help with a more complicated regex

  Hello world

  I got another more complicated one here.

  I need to split ' 0, + + 000, - 4.76517000E + 001 - 0.00000000E, 4.64744200E-001, 6.18140500E-001,-5.93055600E-001' by ',' in a table without '+ 0, 0.00000000E + 000'.

  I use a regular expression ' [+-]([0-9]+[1-9]+) [E] [+] \d "but it didn't, I was wondering what is happening.

  Any idea is appreciated,

  Thank you

  + Kunsheng

  Why did you start a new thread?

  Please continue to the original.

• with Firefox 29 closing tabs got more complicated

  With the new design of 29 FF tabs do not show the close button (X) more when they are too many of them open. This makes tabs closure much more complicated than in the past. Now, I have to go to the first tab to see the button close or use the context menu.
  Is this still a medium easy/fast to close the tabs?

  Hello woro, you can also middle - click on a tab to close...

• Erratic behavior CBWMS view code with code disappears

  This just started today: behavior seen very erratic code with the code disappears.

  As I am writing code, or by selecting the code, he suddenly disappears. Sometimes portions of code disappears and shows a small section that is stressed.

  If I select a photo in design mode, it can also disappear.

  I tried reinstalling Dreamweaver, deleted the Setup folder, preferences removed, but seems to come back.

  Has anyone seen this type of erratic behavior before?

  Here is an example of the strange underlined text (under 'c'):

  

  If I select an underlined letter and keep typing, it continues the line in mode code like this:

  

  Once this emphasis indicates somewhere, this is the beginning of other erratic behaviors such as images or code disappears suddenly, etc..

  It started to happen after upgrading creative cloud today.

  Try to turn off dictation & speech recognition in your system settings.

  Nancy O.

• Erratic behavior of the keyboard of a Satellite R830

  I can't use my portatil to write because the keyboard has an erratic behavior. When you are writing it jumps to different positions on the line.

  No doubt, it can be solved install drivers again, but I'm not an expert, then someone can help with this.

  ARO

  Hello

  Disable Touchpad while writing and using the keyboard.
  I had the same problem in the past.
  Finally, I noticed that I touched the surface of touchpad accidentally while typing and this is the reason why the cursor jumped around.

• Re: Erratic behavior on Satellite M40X

  Hello

  Very often but not always, when I start the laptop (Satellite M40X - 186 Windows XP SP3), after a while, the Windows Media Player popup window. I got close but it reappears etc... also very often, there's erratic behavior: the keyboard is unusable or the letter etc. which appears on the screen is not bound to the key... or the cursor moves in an irrational way.
  I scanned all the files from virus (Avast tool) I reinstalled XP, updated the ATI driver... but this does not appear to have solved the problem.

  No idea what is the cause of this failure?
  Thanks if you can help

  When you start your laptop computer and enter the BIOS settings, you can use keyboard and go to settings?

• Unexpected behavior with the Option "record in the result.

  Hello

  I have unexpected behavior with the Option "record in the result.

  I have a few steps in the subsequence 'X', this subsequence passes a Boolean parameter. According to the value of the parameter I change the "Recorgind results" Option to report it or not. The thing is that if 'result Recorgind' set at race time I modofy by changing the value of Step.ResultRecordingOption to "Enable" and "Disable", the step is not reported until the same sous-suite 'X' is called for the second time (without changing the parameter passed).

  For example: (Preconditon: result Recorgind Option of all value sous-suite x are defined as Disable)

  1 CallSubsequenceX(Parameter: Enable)

  2 CallSubsequenceX(Parameter: Enable)

  3 CallSubsequenceX(Parameter: Disable)

  4 CallSubsequenceX(Parameter: Disable)

  Expected result:

  1. measures have been reported.

  2. measures have been reported.

  3. measures have not been reported.

  4. measures have not been reported.

  Result:

  1. measures would not same value Step.ResultRecordingOption has been changed to 'enable '. (Not Ok)

  2. measures have been reported. (Ok)

  3. measures reported same value Step.ResultRecordingOption has been changed to 'disable '. (Not Ok)

  4. measures have not been reported. (Ok)

  I use TestStand 2013 (5.1.0.226)

  Thanks in advance.

  -Josymar.

  Hi josymar_guzman,

  I just review the sequence and indeed we´re experience unexpected behavior with the Step.ResultRecordingOption callback. By a reason when you run the callback in the expression before each step section, the statement runs only until the next sequence is called, which is not what we want.

  To avoid this, you can place a statement before each step of the sequence, so you can change the State of the Option "record result" for the sequence running (and it is only the following). You can try something like this

  

  where the expression of the statement will be the recall "RunState.NextStep.ResultRecordingOption is YourCondition". With this, we guarantee that the results of the next step will be saved or not. I also remove the expression in the expression prior to each step section, because the condition is now on the statement before each step.

  I tried and it works fine. I´ll set the sequence that you share with me, with the changes. I hope this will help you and solve your problem.

• Weird behavior with Signal to simulate and loops

  I'm having a weird behavior with Signal to simulate and while loops. Attached a photo of my program. The problem I have is that when I use Stop to stop inside while loop, then use to restart the inner loop, simulate Signal instantly generates a bunch of points of data between when I pressed Stop and Go. By example, if I stop for 5 seconds, wait 5 seconds, then press Go, it will instantly generate data for t = 5 t = 10. What I need is for the generation of signals to stop when I press stop and continue where it left off when I press Go. How can I accomplish this? I have no idea why he exhibits the behavior described in the first place.

  Hi optometry.

  Can you give us a screenshot of the configuration window for the VI express to simulate signal? I was able to reproduce the problem when I used "Simulate the time of acquisition" at times, but the VI's are featured as you described you wanted when I used "run as fast as possible." Have you tried this setting?

• Strange behavior with Scan function

  Hi, I see some weird behaviors with the scan function.  Here's a code (for Interactive execution) window which illustrates what I'm struggling with:

  #include 
  static double value;//    1234567890123456static char buffer[20] = "-  24.612 g    ?";
  static int scanneditems;
  static unsigned char sign, stable;
  static char unit[6];
  
  scanneditems = Scan(buffer, "%s>%c[u]%f%c[d]%s[w5y]%c[u]", &sign, &value, unit, &stable);
  

  The buffer I'm scanning has five parts.  The first character is a sign, the next 8 characters is a floating point number, then there is a space that just throw, then five characters is a string that describes the unit, and the last character is a question mark if the reading is unstable or a space otherwise.  The problem is with the last character.  When I run the above code, the value of the variable 'stable' is 32 (space), when I expect a 63 (question mark).  The other points seem to parse correctly, including the double value and the 'unit' char array that contains [g] [space] [space] [space] [space], which is exactly what I expect that it contains.

  It seems I'm missing something obvious, probably something to do with the way that the scan function manages the spaces, but I just can't understand what it is.  Thank you.

  I'm not sure about how Scan treats spaces, but if you check NumFmtdBytes () after the scan you see 12, which means that it has scanned only the 'g' (fill the rest of 'unit' with spaces according to the modifier there) and read the character immediately following the stability.

  This line correctly reads the entire string and returns bytes 16 analyses by the function, which is what is expected.

  scanneditems = Scan (buffer, "%s > %c [u] %f %c [d] %s [-w5t] [u] %c", & sign, & value, unit, & stable);

• Extremely confused with the extremely complicated presentation of BlackBerry applications

  Please help me, I'm very confused with the extremely complicated presentation of BlackBerry applications.

  I made an app, the name is "App", I got signed and downloaded the App using the emulator Ripple, with the word 'HelloWorld' signature (password not true of course).

  Now, I do another application, with the name of the App (B) I CAN'T use the same HelloWorld signature password because the emulator Ripple said "Oh, Snap!" Build request failed with the message: [ERROR] error: Code signing request failed because this version of the application or the package has been previously signed. If please increment the version (s) and try to connect again. »

  Now, I don't understand and I am EXTREMELY confused with the presentation of the model of application for Blackberry.

  I should first request, for an another RDK and COMINCO files create a new signature for App B password?

  Or should I just increment the bundle version? the problem is when I tried it on Blackberry server seems to give narrations of error message that the APP ID is already used.

  Okay, I'm officially stuck and I don't know what to do. Can any developer of blackberry here or the official employee blackberry tells me what I need to do?

  Thank you.

  I do not use ripple either but can see what the problem is (nothing to do with the ripple)

  Open your file config.xml for the new project (probably copied 'App A'?)

  In the widget section, change the id to something different, for example com.example.AppB

  Save - reload the ripple and make sure you have the new ID in the Config-> Widget

  All sorted

• strange behavior with script times

  Hi all

  I have strange behavior with one of my scripts, and I can't understand where is the problem.

  Before you post the code, here's the principle.

  My form has two fields of time: "Time of Injection" and "Post injection time.

  The script runs when the output of "injection time" event and look if the injection time is before time "post injection.

  Here is my code:

  //get the value of the field "Injection time"
  var injection = this.formattedValue;
  
  //create an new Date object
  var injectionTime = new Date();
  
  //split the string to get the HH MM and SS values of the formattedValue (HH:MM:SS)
  var injectionTimeHoursString = injection.substr(0,2);
  var injectionTimeMinutesString = injection.substr(3,2);
  var injectionTimeSecondsString = injection.substr(6,2);
  
  //parse the strings into integer
  var injectionTimeHoursInt = parseInt(injectionTimeHoursString);
  var injectionTimeMinutesInt = parseInt(injectionTimeMinutesString);
  var injectionTimeSecondsInt = parseInt(injectionTimeSecondsString);
  
  //set the integer values into my Date object
  injectionTime.setHours(injectionTimeHoursInt, injectionTimeMinutesInt, injectionTimeSecondsInt,0);
  
  
  //do the same for the other time field "Post injection time"
  var post = post_injection.post_time.formattedValue;
  var postTime = new Date();
  var postTimeHoursString = post.substr(0,2);
  var postTimeMinutesString = post.substr(3,2);
  var postTimeSecondsString = post.substr(6,2);
  var postTimeHoursInt = parseInt(postTimeHoursString);
  var postTimeMinutesInt = parseInt(postTimeMinutesString);
  var postTimeSecondsInt = parseInt(postTimeSecondsString);
  postTime.setHours(postTimeHoursInt, postTimeMinutesInt, postTimeSecondsInt,0);
  
  
  //calculate the difference between both
  var diff = postTime.getTime() - injectionTime.getTime();
  
  //if the difference gives a negative result, display a message, empty the fields and set focus
  if(diff<0) {
       xfa.host.messageBox("The time of injection should be sooner than the time of post-injection activity measure.\n\nPlease re-enter correct times.","Incompatibility of times");
       this.rawValue = "";
       post_injection.post_time.rawValue = "";
       xfa.host.setFocus(post_injection.post_time);
  }
  

  The code seems to run pretty well... except with certain values.

  If postTime is 12:00

  and injetion is 12:04

  I get the error message and everything, so it's OK

  BUT

  When postTime is 12:00

  and injectionTime is 12:08

  No message! as if the difference was not negative! (the difference is zero...)

  When I display the time in a messagebox, 12:04 12:04:00 GMT blah blah... gives but 12:08 gives 12:00:00 GMT etc...

  same problem with 12:09, but not 12:10 for example...

  Any thoughts?

  Thank you.

  Thank you, but since I'm used to javascript, I'll stick to it.

  I understand the problem. It's a javascript with the ParseInt method bug!

  Check here: http://www.breakingpar.com/bkp/home.nsf/0/87256B280015193F87256C85006A6604

  parseInt("08") = 0.

  How to lose 2 hours for a stupid bug...

• Inconsistent behavior with find/replace Applescript

  Hello

  I am trying to add queries additional search/replace to the script by copying and pasting existing queries in the file FindChangeList.txt, then changing variables that are changed/wanted. I'm having mixed success though - sometimes I add a new query and it turns off one of the existing queries, other times I add a new query and it just doesn't work.

  Is this something to do with the copy/paste items, or are there some rules around what order the elements must be in?

  For example, it works fine:

  text {find what: 'Mobile'} {change to: "M"} {include notes: true, include master pages: true include hidden layers: true, any word: false} find the Mobile and replace them with M.

  Yet, just before it, does not work?

  text {find what: 'Business'} {change to: 'B'} {include notes: true, include master pages: true include hidden layers: true, any word: false} find businesses and replace it with B.

  We're just one copy of the other, so, what's the difference?

  I love this script and the time it saves me, but more I tinker with it more, it seems inconsistent.

  Any suggestion would be appreciated.

  See you soon

  Steve

  Files in text format, you should really use TextWrangler http://www.barebones.com/products/textwrangler/

  (or equivalent)...

  Substances

• Chr (10) does not not with isql * more

  Hello
  
  IM using oracle 9i. I executed the following statement in sql * plus,.
  
  Select 'sexy ' | Chr (10) | "' naraya ' double
  
  the output is,
  
  Sery
  Naraya
  
  but when I execute the same statement with iSQL * more
  
  the output is
  
  Naraya sery
  
  I need the first exit in isql * more. What should do?

  Not sure I have mysef don't use isqlplus
  But here's the document that you are going through.

  Link: [http://www.stanford.edu/dept/itss/docs/oracle/10g/server.101/b12170/ch3.htm]

  See you soon!
  Bobin

• I have taken note of the answer to this question, but it wasn't ' art of my question. Yahoo mail with erratic behavior is my problem and it still needs to be resolved

  Behavingerraticall mailbox with all formats distabaled. Letters are disorganized with exceptionally extended alferbets and several pages. Very disheartening to read emails in there.

  I could contact Yahoo and see what they have to say about it.

• Strange behavior with the function «Help in command line»

  So I do a little playing with the opening of the files compiled help (.chm) with the command-line help feature, and I saw a strange behavior when trying to index multi-level access keywords. According to the documentation, if you set the 'Key' operation, you can enter a value for ' string to search for "to access this section. The more precise help that:

  If this string contains a keyword index, the string must match the key of the index as it appears in the help index file. To access a topic with a multilevel index keyword, enter the keyword of the top-level index, a colon and the keyword of the second level index. Do not separate the elements with spaces. For example, a chain of error codes: GPIB jumps about a subject with a keyword of top-level index of error codes and a second level keyword index of GPIB.

  All right, seems simple enough. Except that when I tried, I couldn't work, even with the example provided. I tried the following simple test:

  

  Opens the help file, but it opens to this page, not to the page ' error codes: GPIB "non-descript. I saw this in 8.2 and 8.6. Anyone have any success with access to a multi-level keyword?

  Note - side

  Curiously, the Index for the help lvconcepts.chm file looks like this:

  

  In other words, the input index text is just "GPIB", but the text that appears in the keyword field is "codes error, GPIB. I'm curious to know how this was accomplished. I decompiled the lvconcepts.chm file and watched the .hhk file, and it is not immediately obvious to me. (By the way, if you try to use "error codes, GPIB" it does not either).

  Hello

  Please contact National Instruments!
  It is a very strange behavior.  I tested out and seen the exact
  same results you are experiencing.  This was reported to R & D (AUTO ID # 130246) for further investigations.
  From what I can tell the a possible workaround solution that we have documented
  in the post of root Canal.  I can't continue to look into this in order
  to see if there is no other workaround solution or a reason why it is
  run in this way.  Thanks much for the feedback!  If
  you have any other questions on this subject please post them here.
  Have a great day!