Custom adapter OIF to activate Ondaaah

Similar Questions

• IOM DeProvision through the custom adapter

  Hello
  
  I created a custom adapter using the IOM customer and I successfully available to users by card in the sources to the target. I was struck in user provisioning with the adapter, can someone tell me the process of commissioning?
  
  Thanks in advance.
  Anand K

  I have not access Gmail right now. I'll check and who will answer you.

• Oracle 11g COE of custom components will not activate

  I have a custom component of Oracle 11 COE who will not activate.

  It is a development server, and I was thinking he was a supplier problem given that the component will not activate little matter how many times I rebooted the WCC server.

  Just to rule COE, I advanced and created a component that is empty, it enabled and rebooted WCC. I get the exact same message of ""needs to restart to activate " "

  What should I look for in WCC to solve this problem?
  

  If you look under Administration > Configuration for Instance_name, is the component indicated under active components? It could be that the component is enabled, but the alert message disappears forever.

  https://blogs.Oracle.com/Kyle/entry/adding_your_own_alert_messages

  Jonathan

  https://jonathanhult.com

• Custom adapter DB SQL statement

  Is it possible to pass where clause parameters to a SQL statement custom DB adapter on the fly?

  In querry custom wizard, you simply put:

  Select entrydate, projectid, Billable, sum (duration) duration
  of Dailyactivity_invoice
  where projectid = * #p_project_id *.
  Entrydate group, projectid, billable

  This will make p_project_id an input parameter, you can set using assign before call for adapter

  Adam

• How to unlock the custom desktop background and activate

  Our technician COMPUTER has blocked my desk so that I can not customize the background and change the wallpaper. I was looking on the internet for solutions. It seems that what we call "regedit" can solve this problem. However, I can't locate same command "Run" in the start menu either.

  Is there another solution to unlock me my office?

  Thank you
  Perri

  I do not think that you will find everyone here is ready to give you instructions to work around your COMPUTER service.

  You should talk with the staff of the it Department at your job on your desire to change the background.

• Impossible to activate the USB Belkin, f5d8055 wireless adapter in Windows 7

  I have an old Dell Laptop Inspiron 6400 PC I installed Windows 7 Ultimate on. The built-in wireless adapter works well, but I would like to use an external Belkin F5D8055 N + USB adapter for inclease & range performance.
  So far, I installed the drivers for the correct adapter on the Belkin site and they seem to install correctly. The adapter is recognized and no error display in Device Manager.
  If I disable or uninstall the integrated Dell wireless adapter and try and turn on the Belkin adapter, while the message displayed indicates that it allows, the adapter is disabled and grayed out. I even turned off the Dell Wireless card in the bios that actually no difference.
  I know that the adapter Belkin F5D8055 working as I tried to install it in another laptop (Lenovo) and it works OK.
  My question is what could be causing the adapter Belkin to stay disabled? Is this something that is that collide with the Belkin drivers?
  I find a second laptop Dell Inspiron 6400 with the same generation and has the same symptoms with the Belkin adapter.
  I also tried a former C and W USB wireless adapter and it also will not help.
  Is there a fundamental issue with computers Dell laptop, Inspiron and Windows 7?

  Any help would be appreciated.
  Thank you very much

  Hi Zach, you are quite correct! I have now uninstalled Zonealarm and the Belkin adapter install and activate OK. Thank you very much.

  Do you know if Zonealarm can be configured to work with the Belkin adapter, or is it one or the other?

  Thanks again.

  Unfortunately, it's going to be one or the other, try to reinstall.

• Discoverer 11.1.1.7.0 against 12.1.3 with OAM 11.1.2 EBS to request the password for the user with Ondaaah

  Hello

  Oracle has not been able to help me to do this job; 2 open of SR for weeks and no good answer.  They referred me to the people of onlinappsdba and various other public Internet sites.  We run EBS 12.1.3 and Disco 11.1.1.7.0 with 10g SSO and Ondaaah and SSL.  That works very well, users, identity is established through Ondaaah on our corporate network, with zero sign - on.  I'm replacing 10gSSO by OAM 11.1.2.  OAM/OID works very well for EBS and OBIEE, always zero sign - on with the OID 11.1.1.7.0 and AccessGate piece (and a webgate for both).  (Too many servers to SSO support in my view, if something goes wrong, too many places to look.)  For Disco, I created the osso.conf in OAM 11.1.2 installed in a folder on the Disco and bounced of Disco.  This works OK if in OAM authentication method is based authentication forms, with OAM inviting the user to signon, OID and then passes the user name and password through the OID in Active Directory, and connect on Disco invites to indicate the user name, and then gives access to workbooks.  No prompt for password clubbing.  But when I try to activate Ondaaah as an authentication method in the OAM, discoverer invite first the "Oracle Applications" connection for a user name and the EUL.  But Disco then prompts the user a password, that no longer exists in fnd_user. because authentication is external.  Connections fail.  I am also unable to create a private connection; This dialog box Disco also invites a user password.  At the login page of Disco, the user session went to OAM and fact authentication successful via Ondaaah.  I can tell from follow-up to the session through Fiddler.  Transmitted to the disco but Disco missing something and password prompts.  Support OAM at Oracle seems to think that OAM is not send the cookie to Discoverer, although I'm not sure.

  First of all, Ondaaah with Disco should work with OAM, right?  Any thoughts on what might be missing?  I went through the MOS notes a few times, closely followed the tutorial onlinappsdba on it.

  Thank you very much.

  Tom

  The hotfix is described in Note 1616228.1 problem with mod_osso and custom authentication plugins.  Disco can work very well, with zero sign - we and OAM.

• Activate and deactivate the workflow

  How to trigger disable it and activate the workflow as it were has no adapters to deactivate and activate in the adapter factory.
  
  Do we need to write our custom adapter to trigger the workflow to disable... as there was no such adapter in the adapter factory, I'm not able to create processdefinition.
  
  Published by: user11150369 on Sep 4, 2009 09:37

  Are you sure that Oracle provides no activation and deactivation for Lotus Notes Application, as this is the STANDARD connector.

  Did you write your custom connector for Lotus Notes.

  Same thing to activate but effect wil be change to enable not disable.

• Satellite A660 - adapter WLan USB DLINK non-active

  Hello-

  I'm not happy with my card integrated Realtek wireless. Quality of the connection is not good.

  So I installed my wireless dlink usb adapter (which works on my old XP PC). The software is installed, but the adapter will not activate for some reason any.

  I use windows 7

  Can someone help

  Thank you
  Michael

  D - Link DWA-125 wireless usb adapter

  Hello

  > So I installed my wireless dlink usb adapter (which works on my old XP PC). The software is installed, but the adapter will not activate for some reason any

  Have you checked if this software is compatible with Win 7 OS?
  You have tested the adapter with Win XP and not Win 7 then I recommend to check this maybe you should also visit the support page of the Dlink manufacture

• Is impossible to activate Windows XP.

  The COA key (which is the one you entered) still requires a telephone activation.

   

  
  --

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers

  Hello

  I have the same problem, but he has no. ID Setup. I spoke with an operator trying to activate by phone and rebooted the system twice at the request of operators, but no ID of Installation has been shown.

  HARD drive has been replaced due to infection by the Virus and Windows XP Professional w/SP2 reinstalled with valid genuine CD key.

  Split of: http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_install/windows-xp-activation-after-installation-not-able/6e067558-c4b1-4f64-ae05-55b2cdfdcabd

  Hello
  have you tried to activate by phone or online?
  Try this:

  To contact a Microsoft customer service representative to activate Windows by phone, follow these steps:

  1. Click on Yes, I want to telephone a customer the service representative to active windows now and press Next
  2. Follow the steps in the Activate Windows by phone dialog box.
  3. Select your country first, and then it will give you the number to call, dial the number.
  4. In the dialog box, you have a license number, consolidated figures (3 items), you must enter them via the keyboard of the phone
  5. The system checks the validity of your license to the entry that you just made, if all the information is appropriately and are valid, you will receive an activation code that you will need to enter your computer and your license will be activated.
  6. When activation is complete and you receive the following message, "You have activated your copy of Windows." Click OK.

  Source:

  http://support.Microsoft.com/kb/307890

  http://en.kioskea.NET/FAQ/1996-activate-Windows

  http://www.command-tab.com/2007/03/17/Windows-XP-Activation-in-5-minutes-or-less/

  hope this helps,
  B Eddie

• When you try to activate Windows, I get a message that I have exceeded the number of times that I can activate my OS.

  Reactivation of my professional Windows

  I have a professional windows. I installed it on my Mac and I uninstalled it. But of course I have registered more than once in that it is the machine, but I uninstalled. But now I have an office and I want to use windows profesional in it. Now, when I tried to activate it, it said I crossed my activation limit. Not use it in any other machine. And if we use it in any other machine that I need to disable and want to turn it on in my office.

  Please give me a solution for this.

  Thanks in advance

  If it's a full license or upgrade of detail - you can move it to another computer as long as it is installed on one computer at a time (and if it's a version upgrade Windows the new computer must have its own license of qualification).

  Have you tried using the activation of the phone and talk to someone?

  To contact a Microsoft customer service representative to activate Windows by phone, follow these steps:

  1. Click Start, point to programs, point to Accessories, point to System Toolsand then click Activate Windows.
     Or, click on the Activation of Windows icon in the notification area.
  2. Click on Yes, I want to telephone a customer the service representative to active windows now.
  3. Click read the Windows Product Activation privacy statement, click new, and then click Next.
  4. Follow the steps in the Activate Windows by phone dialog box, and then click Next.
  5. When you are given a number and call don't select any option and wait for a person pick up, then explain what happened.

  The American phone for activation number is 1-888-725-1047

  How to activate XP:
  http://support.Microsoft.com/kb/307890

• Activate Windows XP on a computer that is not connected to the network

  I have a machine that is not connected and I have to activate the XP software.  It is supposed to be a phone number on the activation window that appears, but there is not - does anyone know what number to call to get this activated machine before it expires?  Any help is appreciated.

  This Help article How to activate Windows XP and Microsoft Help support?

  How do to activate Windows XP by phone to contact a Microsoft customer service representative to activate Windows by phone, follow these steps:

  1. Click Start , point to programs , point to Accessories , point to System Tools and then click Activate Windows .

     Or, click on the Activation of Windows icon in the notification area

  2. Click on Yes, I want to telephone a customer the service representative to active windows now .
  3. Click read the Windows Product Activation privacy statement , click new , and then click Next .
  4. Follow the steps in the Activate Windows by phone dialog box, and then click Next .

     Note The number appears now and differs based on the location you select.

  5. When activation is completed and you receive the following message appears, click OK .
     You have activated your copy of Windows.

• Impossible to activate my Vista wireless network card

  I replaced a broken network PCI adapt with a Belkin USB wireless adapter.  I installed everything, restarted, and now my computer can't find any networks.  I open network connections and tried to repair.  When I 'Reset the wireless network adapter' it indicates a problem still exists. As it is said 'Belkin 54 g Wireless USB Network Adapter' knows driver or hardware related issues.  I've already updated the driver for the latest driver.  When I go into network connections and right click on the connection for Belkin 54 g wireless, I try to activate with no luck.  I also try to activate Device Manager with no luck.

  I came to the conclusion there is that some conflicts causing the wireless network adapter to not 'activate' or activate.  What is the problem?

  Hello Brent in Texas.

  O what is the status of the wireless network adapter in Device Manager, you see yellow exclamations or the fringe?

  The error code indicates that the drivers are not installed for your wireless network card.

  You should try to uninstall and reinstall the drivers for your network card wireless instead of updating the drivers. Make sure that you remove the previous version of the driver and install the latest version.

  1. click on start. In the start search box type "devmgmt.msc", and then press ENTER.
  2. expand "network adapters, double-click the entry for the wireless network device.
  3. click on the "Driver" tab, click "Uninstall".
  4. click on start. In the start search box type "appwiz.cpl", and then press ENTER.
  5 remove the entries related to the wireless network adapter.

  Reinstall the driver with your driver CD. After installation, create the connection.

  Alternatively, you can try to uninstall the driver from Device Manager, then go to the computer or the device factory site download the latest driver for your network card and install it.

  You can read the article that will give you all the steps to troubleshoot network connectivity issues:

  http://support.Microsoft.com/kb/936211

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think

• New XPS 13 cannot turn off Adaptive brightness

  I can't turn off Adaptive brightness on the i5 HD 5500 1080 p on new XPS 13 version.

  Once I consult a dark page, the screen turns off, and when I discover a brilliant page, the screen will get brighter. It's extremely embarrassing, and all the options I've tried have not fixed this issue.

  

  Disabling the option of Adaptive brightness to activate in the advanced power settings does nothing. I have on all levels of electrical energy.

  

  There is no option to turn off what should be in the Intel Graphics Driver.

  

  Disabling the sensor monitoring Service doesn't fix or the other.

  I have the latest version of the Intel graphics drivers. Uninstall, it doesn't fix or the other.

  Install another operating system doesn't fix either, so I guess that it is some kind of hardware problem.

  Does anyone have a solution to this annoying problem?

  To be clear, there is no solution to this problem. No amount of software configuration will fix it. Dell engineers have confirmed that this behavior is controlled by the firmware of the screen.

  Last I heard, Dell is working to expose a switch in the BIOS that would disable the Adaptive function contrasts, although they would not give an ETA on when the BIOS update would be available. (source)

• Unable to connect to the internet, no network adapter icon?

  I received a computer toshiba satellite laptop which should have windows 7 ultimate on, however it does not connect to the internet wireless or ethernet, I lived all the troubleshooting suggestions, but there is no network adapter icon to activate. The laptop was of an elderly aunt who barely used and was not very tech savvy so I don't think that its been damaged (it has not been used for some time) any help would be greatly appreciated.

  Are there devices listed as "other"?

  If there is, run as 'Administrator' Device Manager and do a right click, properties, [pilot tab] and try to "roll back driver" (I guess the update driver will not work if the PC is not connected to the internet, but it can also be worth a try)

  If this does not work, try to force the hardware detection - http://www.pctips3000.com/how-to-scan-windows-7-computer-for-newly-attached-hardware/

  If still no joy, use another PC to go to the support site for the brand/model PC and download the latest driver available for your PC and the operating system network card (32/64 bit, etc.) and transfer it to the PC via a USB or SD card. Then try to install it.

  BIOS - how you access the BIOS will depend on the brand / model of the PC and the BIOS itself, but it gives an example: http://pcsupport.about.com/od/fixtheproblem/ht/accessbios.htm give it a read and see if you can follow. Ensure that you change and not change things randomly.