Custom importer support in AE

Similar Questions

• Custom importer and GetTimeInfo8

  I'm working with multiplexed video h264 in mpeg2 transport stream. I have also audio in a mpeg2ts I am trying to sync to the top with him. When you import videos directly in first pro CS6, they are given both a start time of 00:00:00:00 even if they have to be different in order to synchronize.

  Our solution, to avoid any sort of encoding again, was to add our own package of PES in the stream that contains the time information, that we needed and then write a custom importer to search and read this package. This importer recover construction in importer MPEG (so return imBadFile selector imGetInfo8 and imOpenFile8) and listen for othe selector imGetTimeInfo8 to how it would fill the time information.

  The problem I have is that the selector imGetTimeInfo8 is never sent! I tried this hüsing samples SDK_File_Importer both SDK_Custom_Importer as a base, on several test files. Videos still seem to load in first very well (always with the 00:00:00:00 code good time) so it'll clearly through the MPEG importer after that I defer to it. I'm debugging in VS so I can see that I get the following selectors:

  38 imGetPrefs8

  38 imGetPrefs8

  57 imQueryContentState

  37 imGetInfo8

  60 imQueryStreamLabel

  (This repeats 3 times in total)

  I guess there are some series of flags/fields I need to have fulfilled in a way so that imGetTimeInfo8 should be sent, but I can not understand them and the documentation doesn't tell me enough (at least not AFAIK). Or maybe I'm lacking to, I left all the methods of the samples "such what", except back to the imBaseFile where the support required and changing the .sdk (c) to the m2ts formats.

  So in short, my question is: what must happen to ensure that GetTimeInfo8 is called, to know when to pass the majority of the import of an existing plug-in?

  Thank you

  If you imBadFile you abandon all future requests as it will be managed by another importer that accepts short format.

  If I understand you although them implies that, unless you decode the video you can also provide this custom timestamp info.

• Flag of Playmod in custom importer

  Hi all

  I noticed the following note in SDK_Custom_Import.cpp to the SDKGetPrefs8 function.

  "Note: the handle of timelineData is new and allows custom ONLY importers."

  access to the timeline (not ' using a synthesizer or a standard importer).

  The handful of chronology provide the importer the opportunity (and know-how)

  to analyze the chronology, looking for the clip with the flag of playmod

  indicating that it is the currently selected item. This flag is set to

  When the user double-clicks the custom clip imported on the timeline and

  First request of the importer to modify the file. »

  Can someone tell me where "playmod flag" is defined?

  Thank you and best regards,

  Charrier

  Hi Chandan,

  Good eye, you spotted a few comments expired in this sample project.  This comment says also you can use timelineFuncs-> getCurrentClipPos(), which was true at one time, but now this feature is no longer supported.  I will update this review.  Unfortunately, at this time, there is no replacement for getCurrentClipPos(), and there is no flag in the segment information video that offers a flag or a unique ID for the instance of the custom importer, find the clip in the video segment information.

  You write a custom importer (which refers to a file on disk)?  If so, you can do a job to analyze video segments to search for instances of the importer in the timeline panel.  You can find the points of entry and this instance.  The downside is that, if there is more than one instance of the element in the Assembly, it will be difficult to distinguish between the various bodies.

  Kind regards

  Zac

• Is it possible to connect with FACEBOOK Customer / Tech Support? I got my ID stolen FB and I can't connect with a living soul!

  Is it possible to connect with FACEBOOK Customer / Tech Support? I got my FB ID stolen and I can't connect with a living soul! I'm really tired of FACEBOOK and ZUCKERBERG, boasts getting its 1 billionth Member, meanwhile, its members have problems with scams, hackers, even FACEBOOK is now BANNING people for the addition of family and friends! This must be a scam any seriously! Im sick of him, he turned my whole as for social networks. If it wasn't for the fact that I have almost all of my family in Europe and around the world all in one place, I would certainly remove my account. The problem with that is if you delete your FACEBOOK PROFILE, you don't actually remove them. FB keeps them because they are the property of Facebook the minute climb you the post! This information is in the conditions of joining Facebook, but not on the registration page! that is wrong with this picture. THEY HAVE NO SUPPORT, NO CUSTOMER SUPPORT, IT IS Y HAS NO PHONE NUMBER YOU CAN CALL TO REPORT YOUR STOLEN ID AND NOW I HAVE TO ALL RUN IT AROUND TO TRY TO FIND A CYBER CRIME UNIT WHO WILL HELP ME! How can the other thing, I know if Mytechgurus.com is a legitimate business. As I've been hacked and my ID stolen (curiously enough all what's happened just as I was banned from Facebook to add a friend, I've not seen in 36 years.) They have deleted my friendship with her and banned me for 7 days)! Facebook. MyTechGurus.com have charged me $700.00 for 2 pc for serivce of 24/7 for 2 years. Granted they have always been there in the last 6 weeks to help with all the problems that the pirate had created. They've phoned while I had a technician remote access online help with verbal information as it was a huge problem. but I put it back now because a governing body here in Australia called SCAM WATCH who is supposed to tell you who is a scam and is not was good enough to tell me that they are there only to report a scam, they can not physically tell you if one of them is actually a scam or not! I was left to literally chasing my own tail! HE IS THERE ANYONE TO HELP ME AT ALL!

  Hello

  Sorry, we can not help except at the point you in the right direction.

  The Microsoft Community is a site of support of peer reviewed for Windows
  and some Microsoft Products and has absolutely no connection or influence
  with Facebook.

  Rob - SpiritX

• Group of simple logic to operate before the custom import script?

  Hi all
  
  Thank you for taking the time to read my question. I gladly mark this thread as helpful or reply if you can help me. I am a novice to FDM so please keep with.
  
  I have a script to import custom that PKI none assigns to a specific account (substituting any detail PKI). However, now I need the detail of PKI for this account in a second statistical account. I have set up a group of simple logic to create the account of logic that I can map on statistics, but then realizes that the import script runs before the logical group so I lose all details of PKI in the account of the logic as well.
  
  Is it possible to repeat the logical group before importing the script or is there a better way to accomplish what I'm doing?
  
  I don't know how critical it is, but I'm using FDM v11.1.1.3.01 adapter 11 x-G5-C
  
  Published by: user4591089 on August 17, 2011 14:10
  
  Published by: user4591089 on August 17, 2011 14:50

  Follow these steps:

  (1) remove the custom import script.
  (2) create a complex logic account and change the dimension of the PKI in the column with the value [no PIC] group. This will be what is displayed on the screen to import on behalf of this logic.
  (3) map the original source under the statistics account and the account of logic as the case

  Published by: SH on August 18, 2011 09:48

• Assign shortcuts to custom importer

  Hello

  If someone knows if it is possible to assign a keyboard shortcut to a custom importer developed with first Pro SDK plug-in. I luckily able to know the call of my plug-in on the window "Edit-> keyboard customization.

  Thankk beforehand.

  Unfortunately, it is currently not possible to assign a keyboard shortcut to a custom importer.

  Kind regards

  Zac

• HP customer technical support

  This is the number if you wish to contact HP directly to problems or questions.

  1800-474-6836

  You can get upgrades, discounts, replacements, troubleshooting and much more. Please do not hesitate to contact HP.

  There is no charge for phone calls. The only time that there MAY be a charge is for warranty products. It will be up to the customer to pay for the SERVICE.

  You can choose to purchase an upgrade, helpline a year or once payment for the particular problem. Once more, the phone call will not load. HP has sometimes special promotions at warranty the products are still served for free.

  Problems of firmware and driver are all subjects that can be assisted on.

  This number can also give you or transfer you to to support other countries.

• CUIC Rls 11.5 UCCX Rls 8.6 HR data import - support

  New deployment environment CCX CUIC ELA 11.5.

  Can we import old data from historical records of the UCCX Rls 8.6?

  Which utility and process please.

  Jeanie, I know that UCCX 8.x HRC and no cuic. In fact, it is only the customer reports and connect to the database UCCX to pull records and then display them in the form of reports. Now if you want THAT cuic should display the records in UCCX 8 and as I mentioned the only option is to upgrade your UCCX 8.x to 11.x and this way all of your historical data will migrate also and you can then run reports using cuic for the previous time. Apart from that, there is no other choice whatsoever and there never was.

  Concerning

  Deepak

• Customer error supported download the files for the client vSphere 5.0

  Hi all

  
  

  I am new to VMware and learning ESXi 5.0. I built my 5.0 ESXi host and then downloaded the 5.5 vSphere client. Given that I have only one host; client vSphere 5.5 can handle that. I installed the client and enter the IP address of the host with root/configured password management. He gave the certificate WARNING said to download the files from customer support. He has always exceeded with error as you can see it.

  
  

  I'm under client on a LAN connection high speed, I even changed the connections to see if access to the internet the problem. It is more simple home, 1 host installation, a windows 7 computer (with vSphere client installed), both connected to my DSL modem/router. The client support files won't download anything. Help please!

  
  

  

  Sorry my bad vSphere Client 5.5 support ESXi 5.0 but Client vSphere 5.0 ESXi host does not support the 5.5U1 (Build 1618071)

  Check the compatibility matrix for more information vSphere Client

  

  VMware product interoperability matrices

• custom importer

  We have an importer plugin custom for first CS6.

  We do not save a file customized on the disc, but make us the frames required by the framework of the creation on the fly and return the data of imImportImageRec in imImportImage call.

  (1) the sequence when we create a new instance goes like

  imGetPrefs8 - we show a custom dialog box entry here - store the result in a global variable that is accessible at imGetInfo8.

  imGetInfo8 - with private data pointer (where we store pointer to our custom class that actually makes the data (based on the variable defined in imGetPrefs8)

  imImportImage - with imGetInfo8 informed private data pointer - made here based on the number of chassis received the help of private data.

  (2) and when we save and load the instance we get a call to imGetInfo8 with private data (base on which we create an instance of our custom class to display data)

  and subsequent calls to imImportImage with informed private data imGetInfo8.

  (3) the matter now comes when we change the existing instance by double clicking it.

  We get a call to imGetPrefs8 , but not imGetInfo8.

  but we are not able to modify the personal data according to the user changes made in imGetPrefs8, that we do not get a call to imGetInfo8.

  If subsequent calls to imImportImage work with the old private data, where the changes do not reflect.

  How should we go about it?

  Guide.

  Hi William,.

  Yes, this bug has been fixed in the version of 2014 first Pro CC.

• What customer VDM supports the CAC cards?

  I have the latest ESX and VMware View and vCenter installed as well.

  He is everything is configured such that I can present through the client discovers a couple

  Windows desktop computers and connect to them.

  However after creating a keystore and certificates required for the VDM server.

  and allowing chip card (even forcing him), I find that I can connect is no longer

  with the Client to display at all.   We're supposed to to bring up a dialog box PIN code when

  He sees a drive and a valid card, when the view is installed on ActivClient

  MiddleWare (as I have), but instead mine always just says: it can not

  connect to the VDM, because a smart card is necessary.

  I saw that in some document referring to having to use a VDM

  client which is not supported "Online desktop".   However, I do not know

  How called, what version, what it has packaged with or where to download

  he leave.  I would like to try it and see if the problem I have is with that,

  or something configuration, but I have no idea where to look.

  Someone knows something about it or have some ideas/suggestions?

  Thank you!

  The customer display Windows version 3.0 and later support smart card.  If you are not prompted for your card chip PIN then your server to view or your client connection is not configured properly to use authentication by certificate.  You did it for the view connection server, ensure that you went to ensure all the steps mentioned in the Administrator's Guide?  One thing people tend to forget (or spelling) is useCertAuth = true in the locked.properties file, as mentioned in the guide.  And for the customer, are you sure that set you up authentication by smart card properly?  To check if certificates are available for the customer to use, you can go to start > Control Panel > Internet Options > Content > Certificates > personal and view certificates.  When you insert a smart card into the reader, Windows copies the certificates on the local applications computer as the Client of the view can use them.

• Forms can be customized to support the Jalali calendar in the front end?

  One of our potential clients want to use Jalali (Persian) calendar.
  
  I changed the NLS_CALENDAR for the session in Persian, and this is the output of SQL SYSDATE.
  

  SELECT SYSDATE FROM dual;

  SYSDATE
  ------------------
  15 Shahruoar 1389
  
  Thus, it seems to work.
  
  Now the question is our illustrious popup calendar here http://www.freeimagehosting.net/uploads/f257c3997e.jpg in our front will also change the months and dates accordingly. It is DATE_LOV utility developed by Mark Doran we use.
  
  I am unable to change the NLS_CALENDAR DB in Persian to test due to admin problems.
  
  Tagged the calendar then, see the Shahruoar for the month instead of September?

  Yes, but the value set on the database has no effect for your customer session. Take a look at the globalization support Guide:
  http://download.Oracle.com/docs/CD/B19306_01/server.102/b14225/ch3globenv.htm#i1005949

  SQL> select * from nls_database_parameters where parameter = 'NLS_CALENDAR';
  
  PARAMETER                     |VALUE
  ------------------------------|----------------------------------------
  NLS_CALENDAR                  |GREGORIAN
  
  SQL> select sysdate from dual;
  
  SYSDATE
  -------------------
  07.09.2010 08:18:59
  
  SQL> alter session set nls_calendar=persian;
  
  Session altered.
  
  SQL> select sysdate from dual;
  
  SYSDATE
  ------------------
  16 Shahruoar  1389
  
  SQL> select * from nls_database_parameters where parameter = 'NLS_CALENDAR';
  
  PARAMETER                     |VALUE
  ------------------------------|----------------------------------------
  NLS_CALENDAR                  |GREGORIAN
  
  SQL> select * from v$nls_parameters where parameter = 'NLS_CALENDAR';
  
  PARAMETER                                                       |VALUE
  ----------------------------------------------------------------|----------------------------
  NLS_CALENDAR                                                    |Persian
  
  SQL>
  

  as you can see the database setting has nothing to do with the dateformat in my current session.

  see you soon

• Reset password - alert security customer Important

  Yesterday I received an email from Adobe DPSAdmin telling me that ' an attacker penetrated into our network and may have gained access to the Adobe ID and encrypted passwords... as a precaution, we are resetting customer passwords concerned in order to prevent any unauthorized access to customer accounts.»

  Today I received an email from Adobe Cutomer Care uses the same language with a password reset link.  I went through the process of resetting passwords for all Adobe ID, we use for our various published applications.

  Reset these passwords means that I need to rebuild and submit all our applications by using the new password?

  No, once you reset passwords, you need not rebuild all the apps or take any other action. Of course, this Adobe ID allows you to login to the Panel Folio Builder or DPS App Builder, you will need to use the new password.

• FM 11 and SharePoint - custom columns support?

  We are using FM10, DITA-FMX, and SharePoint 2010 and DITA topics.

  We have created a "topic" in SharePoint column, fill us with the type of subject (concept, task, reference) when you check in a DITA document.

  In CMS FM10 connector, advanced search, this column is not available for searching. IN FM11, it seems that maybe (http://help.adobe.com/en_US/framemaker/using/WS92ce23f8a8bab2f3-289f19b113749faafac-8000.h tml), but I'm not completely sure.

  If we improve for FM11, will we be able to find the Type of subject and other custom fields in the advanced search of CMS connector?

  Solved. You must use the literal name of the column. This is not necessarily the same as the name in "Column (click to edit)" in the library settings page.

  To find the literal name, click on the apparent name (as if to edit the column) and then refer to the URL in the address bar of browser for the value of the field. In my case it read "field = TopicTitle", without the space.

  NOTE: The error I mentioned is generated by SharePoint. See for example e-not-installed-properly-go-to-the-list-settings-page-to-delete-these-fields/ http://hazaa.com.au/2012/06/26/microsoft-sharepoint-spexception-one-or-more-field-types-ar

• MOD file import SUPPORT

  Hello people its been a while since I've been on the forum, all hope is good. Forum looking good.

  I'm having a problem with the files MOD impoting.

  What is the best solution

  Thank you

  Baz

  How to convert the file ext above.

  You can see the extensions in the Explorer? Otherwise, in an Explorer window, go to tools > Folder Options > view tab > uncheck "Hide extensions for known file types".

  You could also do this in a batch with my favorite file renaming utility, ReNamer.